#include "rt5350.dtsi" #include #include / { compatible = "omnima,miniembplug", "ralink,rt5350-soc"; model = "Omnima MiniEMBPlug"; leds { compatible = "gpio-leds"; wlan { label = "red:wlan"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; mobile { label = "green:mobile"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; mode-one { label = "mode1"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; linux,code = ; }; mode-two { label = "mode2"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &state_default { gpio { groups = "i2c", "jtag", "uartf"; function = "gpio"; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; ðernet { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; };