From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sat, 29 Oct 2022 22:57:38 +0200 Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board Zyxel NSA310S is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6702 1 GHz - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 2x USB 2.0 - 1x SATA - 3x button - 7x leds - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC) Tested-by: Tony Dinh Signed-off-by: Pawel Dembicki Acked-by: Adam Baker Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++ 2 files changed, 260 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -356,6 +356,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ kirkwood-nsa310a.dtb \ + kirkwood-nsa310s.dtb \ kirkwood-nsa320.dtb \ kirkwood-nsa325.dtb \ kirkwood-openblocks_a6.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * ZyXEL NSA310S Board Description + * Copyright 2020-2022 Pawel Dembicki + * Copyright (c) 2015-2021, Tony Dinh + * Copyright (c) 2014, Adam Baker + * Based upon the board setup file created by Peter Schildmann + */ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include + +/ { + model = "ZyXEL NSA310S"; + compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + }; + + copy { + label = "Copy Button"; + linux,code = ; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_leds>; + pinctrl-names = "default"; + + led-1 { + function = LED_FUNCTION_DISK_ERR; + color = ; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + function = LED_FUNCTION_USB; + color = ; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usb-host"; + }; + + led-3 { + function = LED_FUNCTION_DISK; + color = ; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; + }; + + led-4 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; + + usb0_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "USB Power"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "SATA1 Power"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + thermal-zones { + disk-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <&hdd_temp>; + + trips { + disk_alert: disk-alert { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + disk_crit: disk-crit { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; + + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&i2c0 { + status = "okay"; + + rtc@68 { + compatible = "htk,ht1382"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii-id"; + marvell,reg-init = <0x1 0x16 0x0 0x3>, + <0x1 0x10 0x0 0x1017>, + <0x1 0x11 0x0 0x4408>, + <0x1 0x16 0x0 0x0>; + }; +}; + +&nand { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x00c0000>; + read-only; + }; + partition@c0000 { + label = "uboot_env"; + reg = <0x00c0000 0x0080000>; + }; + partition@140000 { + label = "ubi"; + reg = <0x0140000 0x7ec0000>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp24", "mpp25", "mpp26"; + marvell,function = "gpio"; + }; + + pmx_leds: pmx-leds { + marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23", + "mpp28", "mpp29"; + marvell,function = "gpio"; + }; + + pmx_power: pmx-power { + marvell,pins = "mpp21", "mpp33"; + marvell,function = "gpio"; + }; + + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + status = "okay"; + nr-ports = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hdd_temp: sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; +};