// SPDX-License-Identifier: GPL-2.0-or-later #include "bcm6362.dtsi" / { model = "Huawei HG253s v2"; compatible = "huawei,hg253s-v2", "brcm,bcm6362"; aliases { led-boot = &led_phone_green; led-failsafe = &led_phone_green; led-upgrade = &led_phone_green; }; keys { compatible = "gpio-keys-polled"; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio 24 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wlan { label = "wlan"; gpios = <&gpio 25 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wps { label = "wps"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_phone_green: led@28 { label = "green:phone"; gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; led@30 { function = LED_FUNCTION_USB; color = ; gpios = <&gpio 30 GPIO_ACTIVE_LOW>; }; }; }; &ehci { status = "okay"; }; ðernet { status = "okay"; nvmem-cells = <&macaddr_cferom_6a0>; nvmem-cell-names = "mac-address"; }; &leds { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds>; led@3 { reg = <3>; active-low; label = "green:internet"; }; led@5 { reg = <5>; active-low; label = "green:wifi"; }; }; &lsspi { status = "okay"; switch@0 { compatible = "brcm,bcm53125"; reg = <0>; spi-max-frequency = <781000>; dsa,member = <1 0>; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; label = "lan4"; }; port@2 { reg = <2>; label = "lan3"; }; port@3 { reg = <3>; label = "lan2"; }; port@4 { reg = <4>; label = "lan1"; }; port@8 { reg = <8>; phy-mode = "rgmii"; ethernet = <&switch0port4>; fixed-link { speed = <1000>; full-duplex; asym-pause; pause; }; }; }; }; }; &mdio_ext { phy24: ethernet-phy@18 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <24>; }; }; &nflash { status = "okay"; nandcs@0 { compatible = "brcm,nandcs"; reg = <0>; nand-ecc-step-size = <512>; nand-ecc-strength = <15>; nand-on-flash-bbt; brcm,nand-oob-sector-size = <64>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "cferom"; reg = <0x0000000 0x0020000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_cferom_6a0: macaddr@6a0 { reg = <0x6a0 0x6>; }; }; }; partition@20000 { compatible = "brcm,wfi"; label = "wfi"; reg = <0x0020000 0x7d80000>; }; partition@7da0000 { label = "nvram"; reg = <0x7da0000 0x160000>; }; }; }; }; &ohci { status = "okay"; }; &pinctrl { pinctrl_leds: leds { function = "led"; pins = "gpio3", "gpio5"; }; }; &switch0 { dsa,member = <0 0>; ports { switch0port4: port@4 { reg = <4>; label = "extsw"; phy-mode = "rgmii"; fixed-link { speed = <1000>; full-duplex; }; }; port@5 { reg = <5>; label = "wan"; phy-handle = <&phy24>; phy-mode = "rgmii-txid"; }; }; }; &uart0 { status = "okay"; }; &usbh { status = "okay"; };