From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 16 Feb 2021 00:06:35 +0100 Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908 Trying to access disabled PHY results in MDIO_READ_FAIL and: [ 11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode [ 11.972500] 8021q: adding VLAN 0 to HW filter on device wan [ 11.980205] ------------[ cut here ]------------ [ 11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58 Signed-off-by: Rafał Miłecki --- drivers/net/dsa/bcm_sf2.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1538,6 +1538,12 @@ static int bcm_sf2_sw_probe(struct platf priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff, priv->irq0, priv->irq1); + /* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable + * GPHY when needed. Leave it enabled here. + */ + if (priv->type == BCM4908_DEVICE_ID) + bcm_sf2_gphy_enable_set(priv->dev->ds, true); + return 0; out_mdio: