From b510e5cbbf8b8e2da3198cf931452290629876b7 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Fri, 20 Sep 2024 18:32:11 +0100 Subject: [PATCH 1274/1350] regulator/rpi-panel: Remove the ID read Reading from the Atmel has always been troublesome due to clock stretching, and the driver does nothing with it anyway. Remove the read and assume that if the overlay has been configured (most likely through the firmware autodetection) that the hardware is present. Signed-off-by: Dave Stevenson --- .../regulator/rpi-panel-attiny-regulator.c | 50 ------------------- 1 file changed, 50 deletions(-) --- a/drivers/regulator/rpi-panel-attiny-regulator.c +++ b/drivers/regulator/rpi-panel-attiny-regulator.c @@ -229,39 +229,6 @@ static void attiny_gpio_set(struct gpio_ mutex_unlock(&state->lock); } -static int attiny_i2c_read(struct i2c_client *client, u8 reg, unsigned int *buf) -{ - struct i2c_msg msgs[1]; - u8 addr_buf[1] = { reg }; - u8 data_buf[1] = { 0, }; - int ret; - - /* Write register address */ - msgs[0].addr = client->addr; - msgs[0].flags = 0; - msgs[0].len = ARRAY_SIZE(addr_buf); - msgs[0].buf = addr_buf; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret != ARRAY_SIZE(msgs)) - return -EIO; - - usleep_range(5000, 10000); - - /* Read data from register */ - msgs[0].addr = client->addr; - msgs[0].flags = I2C_M_RD; - msgs[0].len = 1; - msgs[0].buf = data_buf; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret != ARRAY_SIZE(msgs)) - return -EIO; - - *buf = data_buf[0]; - return 0; -} - /* * I2C driver interface functions */ @@ -273,7 +240,6 @@ static int attiny_i2c_probe(struct i2c_c struct regulator_dev *rdev; struct attiny_lcd *state; struct regmap *regmap; - unsigned int data; int ret; state = devm_kzalloc(&i2c->dev, sizeof(*state), GFP_KERNEL); @@ -291,22 +257,6 @@ static int attiny_i2c_probe(struct i2c_c goto error; } - ret = attiny_i2c_read(i2c, REG_ID, &data); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to read REG_ID reg: %d\n", ret); - goto error; - } - - switch (data) { - case 0xde: /* ver 1 */ - case 0xc3: /* ver 2 */ - break; - default: - dev_err(&i2c->dev, "Unknown Atmel firmware revision: 0x%02x\n", data); - ret = -ENODEV; - goto error; - } - regmap_write(regmap, REG_POWERON, 0); msleep(30); regmap_write(regmap, REG_PWM, 0);