// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include / { compatible = "ubnt,aircube-isp", "qca,qca9533"; model = "Ubiquiti airCube ISP"; aliases { label-mac-device = &wmac; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x050000 0xf60000>; }; partition@fb0000 { label = "cfg"; reg = <0xfb0000 0x040000>; read-only; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_6: macaddr@6 { reg = <0x6 0x6>; }; }; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; }; ð1 { nvmem-cells = <&macaddr_art_6>; nvmem-cell-names = "mac-address"; gmac-config { device = <&gmac>; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };