// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include / { compatible = "comfast,cf-e314n-v2", "qca,qca9531"; model = "COMFAST CF-E314N v2"; aliases { serial0 = &uart; led-boot = &led_rssihigh; led-failsafe = &led_rssihigh; led-upgrade = &led_rssihigh; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins &led_rssilow_pin &led_rssimediumhigh_pin &led_rssihigh_pin>; wan { label = "green:wan"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; lan { label = "green:lan"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; rssilow { label = "red:rssilow"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; rssimediumlow { label = "red:rssimediumlow"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; rssimediumhigh { label = "green:rssimediumhigh"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; led_rssihigh: rssihigh { label = "green:rssihigh"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; wlan { label = "green:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &pinmux { led_rssilow_pin: pinmux_rssilow_pin { pinctrl-single,bits = <0x8 0x0 0xff000000>; }; led_rssimediumhigh_pin: pinmux_rssimediumhigh_pin { pinctrl-single,bits = <0xc 0x0 0x00ff0000>; }; led_rssihigh_pin: pinmux_rssihigh_pin { pinctrl-single,bits = <0x10 0x0 0x000000ff>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x010000>; read-only; }; art: partition@10000 { label = "art"; reg = <0x010000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_6: macaddr@6 { reg = <0x6 0x6>; }; }; }; partition@20000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x020000 0x7c0000>; }; partition@7e0000 { label = "configs"; reg = <0x7e0000 0x010000>; read-only; }; partition@7f0000 { label = "nvram"; reg = <0x7f0000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; }; ð1 { nvmem-cells = <&macaddr_art_6>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };