#include "rt3050.dtsi" #include #include / { compatible = "dlink,dir-600-b1", "ralink,rt3050-soc"; model = "D-Link DIR-600 B1"; aliases { led-boot = &led_status_green; led-failsafe = &led_status_green; led-running = &led_status_green; led-upgrade = &led_status_green; }; flash@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; devdata: partition@30000 { label = "devdata"; reg = <0x30000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_devdata_4000: eeprom@4000 { reg = <0x4000 0x200>; }; macaddr_devdata_4004: macaddr@4004 { reg = <0x4004 0x6>; }; }; }; factory: partition@40000 { label = "devconf"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; status { label = "amber:status"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; led_status_green: status2 { label = "green:status"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; wan { label = "amber:wan"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; wan2 { label = "green:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; wps { label = "blue:wps"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; }; }; &state_default { gpio { groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; function = "gpio"; }; }; ðernet { nvmem-cells = <&macaddr_devdata_4004>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { nvmem-cells = <&eeprom_devdata_4000>; nvmem-cell-names = "eeprom"; };