#include "mt7628an.dtsi" #include #include / { compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc"; model = "Zbtlink ZBT-WE1226"; aliases { led-boot = &led_wlan; led-failsafe = &led_wlan; led-running = &led_wlan; led-upgrade = &led_wlan; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; wan { label = "green:wan"; gpios = <&gpio 39 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; }; led_wlan: wlan { label = "green:wlan"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; }; }; &state_default { gpio { groups = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an"; function = "gpio"; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; macaddr_factory_2e: macaddr@2e { reg = <0x2e 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; ðernet { nvmem-cells = <&macaddr_factory_2e>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; };