// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "linksys,re7000", "mediatek,mt7621-soc"; model = "Linksys RE7000"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; leds { compatible = "gpio-leds"; wifi { label = "orange:wifi"; gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wps { label = "orange:wps"; gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; }; led_power: power { label = "green:power"; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; wps { label = "wps"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x1000>; }; partition@32000 { label = "config"; reg = <0x32000 0xe000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x4da8>; }; macaddr_factory_2e: macaddr@2e { reg = <0x2e 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0xfb0000>; }; }; }; }; &state_default { gpio { groups = "i2c", "uart2", "rgmii2"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_2e>; nvmem-cell-names = "mac-address"; }; ðernet { pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; }; &switch0 { ports { port@0 { status = "okay"; label = "lan"; }; }; };