#include "mt7620a.dtsi" #include #include #include / { compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc"; model = "Planex MZK-EX750NP"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; leds { compatible = "gpio-leds"; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; wifi { label = "red:wifi"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; rep { label = "blue:rep"; gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; }; wifi1 { label = "blue:wifi1"; gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; }; wifi2 { label = "blue:wifi2"; gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; }; wifi3 { label = "blue:wifi3"; gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; linux,code = ; }; }; }; &gpio2 { status = "okay"; }; &gpio3 { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x730000>; }; partition@780000 { label = "Udata"; reg = <0x780000 0x80000>; }; }; }; }; &state_default { gpio { groups = "uartf", "nd_sd", "rgmii2", "wled"; function = "gpio"; }; }; ðernet { pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; mediatek,portmap = "llllw"; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; }; };