// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar9344.dtsi" #include #include #include #include / { chosen { bootargs = "console=ttyS0,115200n8"; }; aliases { led-boot = &led_power_amber; led-failsafe = &led_power_amber; led-running = &led_power_green; led-upgrade = &led_power_amber; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; wps { label = "wps"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; reset { label = "reset"; linux,code = ; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; rfkill { label = "rfkill"; linux,code = ; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; leds: leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&enable_gpio_11>; led_power_green: power_green { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; led_power_amber: power_amber { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wlan2g_green { label = "green:wlan2g"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g_blue { label = "blue:wlan5g"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wps_green { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; wps_amber { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; ubi-concat { compatible = "mtd-concat"; devices = <&ubiconcat0 &ubiconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; ubi@0 { label = "ubi"; reg = <0x0 0x7500000>; }; }; }; }; &pinmux { enable_gpio_11: pinmux_enable_gpio_11 { pinctrl-single,bits = <0x8 0x0 0xff000000>; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x40000 0x40000>; }; caldata: partition@80000 { label = "caldata"; reg = <0x80000 0x40000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_caldata_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_caldata_c: macaddr@c { reg = <0xc 0x6>; }; cal_art_1000: cal@1000 { reg = <0x1000 0x440>; }; cal_art_5000: cal@5000 { reg = <0x5000 0x440>; }; }; }; partition@c0000 { label = "pot"; reg = <0xc0000 0x80000>; }; partition@140000 { label = "language"; reg = <0x140000 0x200000>; }; partition@340000 { label = "config"; reg = <0x340000 0x80000>; }; partition@3c0000 { label = "traffic_meter"; reg = <0x3c0000 0x300000>; }; partition@6c0000 { label = "firmware"; reg = <0x6c0000 0x1900000>; compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; kernel@0 { label = "kernel"; reg = <0x0 0x400000>; }; ubiconcat0: partition@400000 { label = "ubiconcat0"; reg = <0x400000 0x1500000>; }; }; partition@1fc0000 { label = "caldata_backup"; reg = <0x1fc0000 0x40000>; read-only; }; ubiconcat1: partition@2000000 { label = "ubiconcat1"; reg = <0x2000000 0x6000000>; }; }; }; &ref { clock-frequency = <40000000>; }; &builtin_switch { resets = <&rst 8>, <&rst 12>; reset-names = "switch", "switch-analog"; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "rgmii"; qca,mib-poll-interval = <500>; qca,ar8327-initvals = < 0x04 0x07600000 0x0c 0x01000000 0x10 0xc1000000 0x50 0xcc35cc35 0x54 0xcb37cb37 0x58 0x00000000 0x5c 0x00f3cf00 0x7c 0x0000007e 0x94 0x0000007e >; }; }; ð0 { status = "okay"; /* default for ar934x, except for 1000M */ pll-data = <0x06000000 0x00000101 0x00001616>; nvmem-cells = <&macaddr_caldata_0>; nvmem-cell-names = "mac-address"; phy-mode = "rgmii"; phy-handle = <&phy0>; }; &gpio { lna0 { gpio-hog; line-name = "netgear:ext:lna0"; gpios = <18 GPIO_ACTIVE_HIGH>; output-high; }; lna1 { gpio-hog; line-name = "netgear:ext:lna1"; gpios = <19 GPIO_ACTIVE_HIGH>; output-high; }; }; &wmac { status = "okay"; nvmem-cells = <&macaddr_caldata_0>, <&cal_art_1000>; nvmem-cell-names = "mac-address", "calibration"; }; &pcie { status = "okay"; ath9k: wifi@0,0 { compatible = "pci168c,0033"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&macaddr_caldata_c>, <&cal_art_5000>; nvmem-cell-names = "mac-address", "calibration"; #gpio-cells = <2>; gpio-controller; }; };