#include "mt7620a.dtsi" #include #include / { compatible = "glinet,gl-mt750", "ralink,mt7620a-soc"; model = "GL-MT750"; aliases { label-mac-device = &wmac; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; wan { label = "gl-mt750:wan"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; }; lan { label = "gl-mt750:lan"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; wlan { label = "gl-mt750:wlan"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; linux,code = ; }; BTN_0 { label = "BTN_0"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = ; }; BTN_1 { label = "BTN_1"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &gpio2 { status = "okay"; }; &gpio3 { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_4000: macaddr@4000 { reg = <0x4000 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0xf80000>; }; partition@ff0000 { label = "art"; reg = <0xff0000 0x10000>; }; }; }; }; &sdhci { status = "okay"; }; &ehci { status = "okay"; }; &ohci { status = "okay"; }; ðernet { nvmem-cells = <&macaddr_factory_4000>; nvmem-cell-names = "mac-address"; mediatek,portmap = "wllll"; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; }; }; &state_default { gpio { groups = "wled","ephy","uartf"; function = "gpio"; }; };