From aa87cd8b35736a5183745ab0ec4b82419024dfd7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 27 Jan 2023 12:39:31 +0100 Subject: [PATCH] wifi: mac80211: mlme: handle EHT channel puncturing Handle the Puncturing info received from the AP in the EHT Operation element in beacons. If the info is invalid: - during association: disable EHT connection for the AP - after association: disconnect This commit includes many (internal) bugfixes and spec updates various people. Co-developed-by: Miri Korenblit Signed-off-by: Miri Korenblit Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 +- net/mac80211/cfg.c | 2 +- net/mac80211/chan.c | 2 +- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/mlme.c | 224 ++++++++++++++++++++++++++++++++++++- 5 files changed, 228 insertions(+), 7 deletions(-) --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -340,7 +340,7 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed. * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response * status changed. - * + * @BSS_CHANGED_EHT_PUNCTURING: The channel puncturing bitmap changed. */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -375,6 +375,7 @@ enum ieee80211_bss_change { BSS_CHANGED_HE_BSS_COLOR = 1<<29, BSS_CHANGED_FILS_DISCOVERY = 1<<30, BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31, + BSS_CHANGED_EHT_PUNCTURING = BIT_ULL(32), /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -640,6 +641,7 @@ struct ieee80211_fils_discovery { * @tx_pwr_env_num: number of @tx_pwr_env. * @pwr_reduction: power constraint of BSS. * @eht_support: does this BSS support EHT + * @eht_puncturing: bitmap to indicate which channels are punctured in this BSS * @csa_active: marks whether a channel switch is going on. Internally it is * write-protected by sdata_lock and local->mtx so holding either is fine * for read access. @@ -739,6 +741,7 @@ struct ieee80211_bss_conf { u8 tx_pwr_env_num; u8 pwr_reduction; bool eht_support; + u16 eht_puncturing; bool csa_active; bool mu_mimo_owner; --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -4195,7 +4195,7 @@ static int ieee80211_set_ap_chanwidth(st struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_link_data *link; int ret; - u32 changed = 0; + u64 changed = 0; link = sdata_dereference(sdata->link[link_id], sdata); --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -1935,7 +1935,7 @@ int ieee80211_link_use_reserved_context( int ieee80211_link_change_bandwidth(struct ieee80211_link_data *link, const struct cfg80211_chan_def *chandef, - u32 *changed) + u64 *changed) { struct ieee80211_sub_if_data *sdata = link->sdata; struct ieee80211_bss_conf *link_conf = link->conf; --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -2497,7 +2497,7 @@ int ieee80211_link_unreserve_chanctx(str int __must_check ieee80211_link_change_bandwidth(struct ieee80211_link_data *link, const struct cfg80211_chan_def *chandef, - u32 *changed); + u64 *changed); void ieee80211_link_release_channel(struct ieee80211_link_data *link); void ieee80211_link_vlan_copy_chanctx(struct ieee80211_link_data *link); void ieee80211_link_copy_chanctx_to_vlans(struct ieee80211_link_data *link, --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8,7 +8,7 @@ * Copyright 2007, Michael Wu * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2022 Intel Corporation + * Copyright (C) 2018 - 2023 Intel Corporation */ #include @@ -88,6 +88,141 @@ MODULE_PARM_DESC(probe_wait_ms, */ #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 +struct ieee80211_per_bw_puncturing_values { + u8 len; + const u16 *valid_values; +}; + +static const u16 puncturing_values_80mhz[] = { + 0x8, 0x4, 0x2, 0x1 +}; + +static const u16 puncturing_values_160mhz[] = { + 0x80, 0x40, 0x20, 0x10, 0x8, 0x4, 0x2, 0x1, 0xc0, 0x30, 0xc, 0x3 +}; + +static const u16 puncturing_values_320mhz[] = { + 0xc000, 0x3000, 0xc00, 0x300, 0xc0, 0x30, 0xc, 0x3, 0xf000, 0xf00, + 0xf0, 0xf, 0xfc00, 0xf300, 0xf0c0, 0xf030, 0xf00c, 0xf003, 0xc00f, + 0x300f, 0xc0f, 0x30f, 0xcf, 0x3f +}; + +#define IEEE80211_PER_BW_VALID_PUNCTURING_VALUES(_bw) \ + { \ + .len = ARRAY_SIZE(puncturing_values_ ## _bw ## mhz), \ + .valid_values = puncturing_values_ ## _bw ## mhz \ + } + +static const struct ieee80211_per_bw_puncturing_values per_bw_puncturing[] = { + IEEE80211_PER_BW_VALID_PUNCTURING_VALUES(80), + IEEE80211_PER_BW_VALID_PUNCTURING_VALUES(160), + IEEE80211_PER_BW_VALID_PUNCTURING_VALUES(320) +}; + +static bool ieee80211_valid_disable_subchannel_bitmap(u16 *bitmap, + enum nl80211_chan_width bw) +{ + u32 idx, i; + + switch (bw) { + case NL80211_CHAN_WIDTH_80: + idx = 0; + break; + case NL80211_CHAN_WIDTH_160: + idx = 1; + break; + case NL80211_CHAN_WIDTH_320: + idx = 2; + break; + default: + *bitmap = 0; + break; + } + + if (!*bitmap) + return true; + + for (i = 0; i < per_bw_puncturing[idx].len; i++) + if (per_bw_puncturing[idx].valid_values[i] == *bitmap) + return true; + + return false; +} + +/* + * Extract from the given disabled subchannel bitmap (raw format + * from the EHT Operation Element) the bits for the subchannel + * we're using right now. + */ +static u16 +ieee80211_extract_dis_subch_bmap(const struct ieee80211_eht_operation *eht_oper, + struct cfg80211_chan_def *chandef, u16 bitmap) +{ + struct ieee80211_eht_operation_info *info = (void *)eht_oper->optional; + struct cfg80211_chan_def ap_chandef = *chandef; + u32 ap_center_freq, local_center_freq; + u32 ap_bw, local_bw; + int ap_start_freq, local_start_freq; + u16 shift, mask; + + if (!(eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) || + !(eht_oper->params & + IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) + return 0; + + /* set 160/320 supported to get the full AP definition */ + ieee80211_chandef_eht_oper(eht_oper, true, true, &ap_chandef); + ap_center_freq = ap_chandef.center_freq1; + ap_bw = 20 * BIT(u8_get_bits(info->control, + IEEE80211_EHT_OPER_CHAN_WIDTH)); + ap_start_freq = ap_center_freq - ap_bw / 2; + local_center_freq = chandef->center_freq1; + local_bw = 20 * BIT(ieee80211_chan_width_to_rx_bw(chandef->width)); + local_start_freq = local_center_freq - local_bw / 2; + shift = (local_start_freq - ap_start_freq) / 20; + mask = BIT(local_bw / 20) - 1; + + return (bitmap >> shift) & mask; +} + +/* + * Handle the puncturing bitmap, possibly downgrading bandwidth to get a + * valid bitmap. + */ +static void +ieee80211_handle_puncturing_bitmap(struct ieee80211_link_data *link, + const struct ieee80211_eht_operation *eht_oper, + u16 bitmap, u64 *changed) +{ + struct cfg80211_chan_def *chandef = &link->conf->chandef; + u16 extracted; + u64 _changed = 0; + + if (!changed) + changed = &_changed; + + while (chandef->width > NL80211_CHAN_WIDTH_40) { + extracted = + ieee80211_extract_dis_subch_bmap(eht_oper, chandef, + bitmap); + + if (ieee80211_valid_disable_subchannel_bitmap(&bitmap, + chandef->width)) + break; + link->u.mgd.conn_flags |= + ieee80211_chandef_downgrade(chandef); + *changed |= BSS_CHANGED_BANDWIDTH; + } + + if (chandef->width <= NL80211_CHAN_WIDTH_40) + extracted = 0; + + if (link->conf->eht_puncturing != extracted) { + link->conf->eht_puncturing = extracted; + *changed |= BSS_CHANGED_EHT_PUNCTURING; + } +} + /* * We can have multiple work items (and connection probing) * scheduling this timer, but we need to take care to only @@ -413,7 +548,7 @@ static int ieee80211_config_bw(struct ie const struct ieee80211_he_operation *he_oper, const struct ieee80211_eht_operation *eht_oper, const struct ieee80211_s1g_oper_ie *s1g_oper, - const u8 *bssid, u32 *changed) + const u8 *bssid, u64 *changed) { struct ieee80211_sub_if_data *sdata = link->sdata; struct ieee80211_local *local = sdata->local; @@ -4140,6 +4275,7 @@ static bool ieee80211_assoc_config_link( link_sta); bss_conf->eht_support = link_sta->pub->eht_cap.has_eht; + *changed |= BSS_CHANGED_EHT_PUNCTURING; } else { bss_conf->eht_support = false; } @@ -5452,6 +5588,45 @@ static bool ieee80211_rx_our_beacon(cons return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); } +static bool ieee80211_config_puncturing(struct ieee80211_link_data *link, + const struct ieee80211_eht_operation *eht_oper, + u64 *changed) +{ + u16 bitmap = 0, extracted; + + if ((eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && + (eht_oper->params & + IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { + const struct ieee80211_eht_operation_info *info = + (void *)eht_oper->optional; + const u8 *disable_subchannel_bitmap = info->optional; + + bitmap = get_unaligned_le16(disable_subchannel_bitmap); + } + + extracted = ieee80211_extract_dis_subch_bmap(eht_oper, + &link->conf->chandef, + bitmap); + + /* accept if there are no changes */ + if (!(*changed & BSS_CHANGED_BANDWIDTH) && + extracted == link->conf->eht_puncturing) + return true; + + if (!ieee80211_valid_disable_subchannel_bitmap(&bitmap, + link->conf->chandef.width)) { + link_info(link, + "Got an invalid disable subchannel bitmap from AP %pM: bitmap = 0x%x, bw = 0x%x. disconnect\n", + link->u.mgd.bssid, + bitmap, + link->conf->chandef.width); + return false; + } + + ieee80211_handle_puncturing_bitmap(link, eht_oper, bitmap, changed); + return true; +} + static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, struct ieee80211_hdr *hdr, size_t len, struct ieee80211_rx_status *rx_status) @@ -5468,7 +5643,7 @@ static void ieee80211_rx_mgmt_beacon(str struct ieee80211_channel *chan; struct link_sta_info *link_sta; struct sta_info *sta; - u32 changed = 0; + u64 changed = 0; bool erp_valid; u8 erp_value = 0; u32 ncrc = 0; @@ -5761,6 +5936,21 @@ static void ieee80211_rx_mgmt_beacon(str elems->pwr_constr_elem, elems->cisco_dtpc_elem); + if (elems->eht_operation && + !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) { + if (!ieee80211_config_puncturing(link, elems->eht_operation, + &changed)) { + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + ieee80211_report_disconnect(sdata, deauth_buf, + sizeof(deauth_buf), true, + WLAN_REASON_DEAUTH_LEAVING, + false); + goto free; + } + } + ieee80211_link_info_change_notify(sdata, link, changed); free: kfree(elems); @@ -6862,9 +7052,12 @@ ieee80211_setup_assoc_link(struct ieee80 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); } + link->conf->eht_puncturing = 0; + rcu_read_lock(); beacon_ies = rcu_dereference(cbss->beacon_ies); if (beacon_ies) { + const struct ieee80211_eht_operation *eht_oper; const struct element *elem; u8 dtim_count = 0; @@ -6893,6 +7086,31 @@ ieee80211_setup_assoc_link(struct ieee80 link->conf->ema_ap = true; else link->conf->ema_ap = false; + + elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_OPERATION, + beacon_ies->data, beacon_ies->len); + eht_oper = (const void *)(elem->data + 1); + + if (elem && + ieee80211_eht_oper_size_ok((const void *)(elem->data + 1), + elem->datalen - 1) && + (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && + (eht_oper->params & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { + const struct ieee80211_eht_operation_info *info = + (void *)eht_oper->optional; + const u8 *disable_subchannel_bitmap = info->optional; + u16 bitmap; + + bitmap = get_unaligned_le16(disable_subchannel_bitmap); + if (ieee80211_valid_disable_subchannel_bitmap(&bitmap, + link->conf->chandef.width)) + ieee80211_handle_puncturing_bitmap(link, + eht_oper, + bitmap, + NULL); + else + conn_flags |= IEEE80211_CONN_DISABLE_EHT; + } } rcu_read_unlock();