// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7628an.dtsi" #include #include / { model = "Minew G1-C"; compatible = "minew,g1-c", "mediatek,mt7628an-soc"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_system: system { label = "red:system"; gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; gpio-export { compatible = "gpio-export"; #size-cells = <0>; ws2812 { gpio-export,name = "ws2812"; gpio-export,output = <1>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; nrf_power { gpio-export,name = "nrf_power"; gpio-export,output = <1>; gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; }; }; }; &state_default { gpio { groups = "gpio"; function = "gpio"; }; p0led_an { groups = "p0led_an"; function = "gpio"; }; uart1 { groups = "uart1"; function = "gpio"; }; wdt { groups = "wdt"; function = "gpio"; }; }; &spi0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; m25p80@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0xfb0000>; }; }; }; }; ðernet { nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x3e>; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &sdhci { status = "okay"; mediatek,cd-high; };