// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "ar7100.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "aruba,ap-105", "qca,ar7161";
	model = "Aruba AP-105";

	chosen {
		bootargs = "console=ttyS0,9600";
	};

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_power_red;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
		label-mac-device = &eth0;
	};

	leds {
		compatible = "gpio-leds";

		led_power_green: power_green {
			label = "green:power";
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
		};

		led_power_red: power_red {
			label = "red:power";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			panic-indicator;
		};

		wifi_2g_red {
			label = "red:wlan2g";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
		};

		wifi_5g_red {
			label = "red:wlan5g";
			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
		};
	};

	ath9k-leds {
		compatible = "gpio-leds";

		wifi_2g_green {
			label = "green:wlan2g";
			gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		wifi_5g_green {
			label = "green:wlan5g";
			gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
		};
	};

	i2c {
		compatible = "i2c-gpio";

		sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
		scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;

		#address-cells = <1>;
		#size-cells = <0>;

		tpm@29 {
			compatible = "atmel,at97sc3203s";
			reg = <0x29>;

			/* triggering it, will also kill system */
			reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
		};
	};
};

&pcie0 {
	status = "okay";

	ath9k0: wifi@0,11 { /* 2.4 GHz */
		compatible = "pci168c,0029";
		nvmem-cells = <&macaddr_hwinfo_1c 1>;
		nvmem-cell-names = "mac-address";
		reg = <0x8800 0 0 0 0>;
		#gpio-cells = <2>;
		gpio-controller;
	};

	ath9k1: wifi@0,12 { /* 5 GHz */
		compatible = "pci168c,0029";
		nvmem-cells = <&macaddr_hwinfo_1c 2>;
		nvmem-cell-names = "mac-address";
		reg = <0x9000 0 0 0 0>;
		#gpio-cells = <2>;
		gpio-controller;
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&eth0 {
	status = "okay";
	nvmem-cells = <&macaddr_hwinfo_1c 0>;
	nvmem-cell-names = "mac-address";

	pll-data = <0x00110000 0x00001099 0x00991099>;

	phy-mode = "rgmii";
	phy-handle = <&phy0>;
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x40000>;
				read-only;
			};

			partition@40000 {
				label = "firmware";
				reg = <0x40000 0xfa0000>;
				compatible = "denx,uimage";
			};

			hwinfo: partition@fe0000 {
				reg = <0xfe0000 0x10000>;
				compatible = "nvmem-cells";
				label = "hwinfo";
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_hwinfo_1c: mac-address@1c {
						compatible = "mac-base";
						reg = <0x1c 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			partition@ff0000 {
				label = "u-boot-env";
				reg = <0xff0000 0x10000>;
				read-only;
			};
		};
	};
};