From baec350a0994467584e7e390746e0bb365957a89 Mon Sep 17 00:00:00 2001
From: Changhuang Liang <changhuang.liang@starfivetech.com>
Date: Tue, 13 Jun 2023 16:55:23 +0800
Subject: [PATCH 086/116] dt-bindings: media: i2c: Add IMX708 CMOS sensor
 binding

Add YAML devicetree binding for IMX708 CMOS image sensor.
Let's also add a MAINTAINERS entry for the binding and driver.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 .../devicetree/bindings/media/i2c/imx708.yaml | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx708.yaml

--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx708.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.om>
+
+description: |-
+  The Sony IMX708 is a 1/2.3-inch CMOS active pixel digital mage sensor
+  with an active array size of 4608H x 2592V. It is rogrammable through
+  I2C interface. The I2C address is fixed to 0x1A as per ensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured s either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx708
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.1 volts
+
+  VANA1-supply:
+    description:
+      Analog1 voltage supply, 2.8 volts
+
+  VANA2-supply:
+    description:
+      Analog2 voltage supply, 1.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.8 volts
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies and INCK re applied.
+
+  # See ../video-interfaces.txt for more details
+  port:
+    type: object
+    properties:
+      endpoint:
+        type: object
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or our-lane operation.
+              For two-lane operation the property must be set o <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              MIPI CSI-2 clock is non-continuous if this roperty is present,
+              otherwise it's continuous.
+
+          link-frequencies:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/int64-array
+            description:
+              Allowed data bus frequencies.
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA1-supply
+  - VANA2-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx708: sensor@1a {
+            compatible = "sony,imx708";
+            reg = <0x1a>;
+            clocks = <&imx708_clk>;
+            VANA1-supply = <&imx708_vana1>; /* 1.8v */
+            VANA2-supply = <&imx708_vana2>; /* 2.8v */
+            VDIG-supply = <&imx708_vdig>;   /* 1.1v */
+            VDDL-supply = <&imx708_vddl>;   /* 1.8v */
+
+            port {
+                imx708_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };