From 5171a96d17e35b7af7efbf6e9c9667f93fbd828f Mon Sep 17 00:00:00 2001 From: Nick Hollinghurst Date: Wed, 11 Oct 2023 15:14:59 +0100 Subject: [PATCH 0669/1085] input: touchscreen: edt-ft5x06: Suppress bogus data on startup When polled without the use of IRQ, FT5x06 registers may return undefined initial data, causing unwanted touches or event spamming. A simple way to filter this out is to suppress touches until the TD_STATUS register changes for the first time. Increase the delay before first polling to 300ms, to avoid transient I2C read flakiness that seems to occur after reset. Signed-off-by: Nick Hollinghurst --- drivers/input/touchscreen/edt-ft5x06.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -80,6 +80,8 @@ #define M06_REG_CMD(factory) ((factory) ? 0xf3 : 0xfc) #define M06_REG_ADDR(factory, addr) ((factory) ? (addr) & 0x7f : (addr) & 0x3f) +#define RESET_DELAY_MS 300 /* reset deassert to I2C */ +#define FIRST_POLL_DELAY_MS 300 /* in addition to the above */ #define POLL_INTERVAL_MS 17 /* 17ms = 60fps */ enum edt_pmode { @@ -145,6 +147,7 @@ struct edt_ft5x06_ts_data { char name[EDT_NAME_LEN]; char fw_version[EDT_NAME_LEN]; + int init_td_status; struct edt_reg_addr reg_addr; enum edt_ver version; @@ -324,6 +327,21 @@ static irqreturn_t edt_ft5x06_ts_isr(int * points. */ num_points = min(rdbuf[2] & 0xf, tsdata->max_support_points); + + /* When polling FT5x06 without IRQ: initial register contents + * could be stale or undefined; discard all readings until + * TD_STATUS changes for the first time (or num_points is 0). + */ + if (tsdata->init_td_status) { + if (tsdata->init_td_status < 0) + tsdata->init_td_status = rdbuf[2]; + + if (num_points && rdbuf[2] == tsdata->init_td_status) + goto out; + + tsdata->init_td_status = 0; + } + if (!error && num_points) error = regmap_bulk_read(tsdata->regmap, tsdata->tdata_offset, @@ -1318,7 +1336,7 @@ static int edt_ft5x06_ts_probe(struct i2 if (tsdata->reset_gpio) { usleep_range(5000, 6000); gpiod_set_value_cansleep(tsdata->reset_gpio, 0); - msleep(300); + msleep(RESET_DELAY_MS); } input = devm_input_allocate_device(&client->dev); @@ -1407,11 +1425,12 @@ static int edt_ft5x06_ts_probe(struct i2 return error; } } else { + tsdata->init_td_status = -1; /* filter bogus initial data */ INIT_WORK(&tsdata->work_i2c_poll, edt_ft5x06_ts_work_i2c_poll); timer_setup(&tsdata->timer, edt_ft5x06_ts_irq_poll_timer, 0); - tsdata->timer.expires = jiffies + - msecs_to_jiffies(POLL_INTERVAL_MS); + tsdata->timer.expires = + jiffies + msecs_to_jiffies(FIRST_POLL_DELAY_MS); add_timer(&tsdata->timer); }