openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00

Author	SHA1	Message	Date
Gabor Juhos	4085a5773d	ar71xx: fixup allowed PHY interface types for QCA9558 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34851	2012-12-22 12:12:44 +00:00
Gabor Juhos	f01a786825	ar71xx: don't assign any MII bus device on QCA9558 by default Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34850	2012-12-22 12:12:43 +00:00
Gabor Juhos	9edcd9d3a3	ar71xx: ag71xx: fix mii_bus_dev sanity check The mii_bus device is not required if phy_mask is zero. The driver will use a fixed connection if it is not specified. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34849	2012-12-22 12:12:41 +00:00
Gabor Juhos	ad0f03d250	ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev Trying to do that causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4 Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000000 00000001 $ 4 : 00000000 802e6390 ffff8f45 00000001 $ 8 : 804b5360 ffffff80 802f93bc 00000000 $12 : 802f93e8 00000000 00000000 00000000 $16 : 8381aba0 8381aba0 00000000 00000000 $20 : 8295eff0 00000032 80000000 004101b8 $24 : 00000000 777265b0 $28 : 82936000 82937cf0 00420000 801d18d4 Hi : 00000000 Lo : 00000001 epc : 801d170c ar7240sw_reset+0x1c/0x19c Tainted: G O ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0 Status: 1100fc03 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019750 (MIPS 74Kc) Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button _hotplug(O) Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750) Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000 8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0 8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c 8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c 8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348 ... Call Trace: [<801d170c>] ar7240sw_reset+0x1c/0x19c [<801d18d4>] ag71xx_ar7240_start+0x28/0xc0 [<801cf900>] ag71xx_open+0x1d0/0x258 [<801ec08c>] __dev_open+0xcc/0x130 [<801ec348>] __dev_change_flags+0xc0/0x160 [<801ec490>] dev_change_flags+0x20/0x6c [<801ec5c8>] dev_ifsioc+0xec/0x348 [<801ecdb8>] dev_ioctl+0x594/0x67c [<800ec00c>] do_vfs_ioctl+0x598/0x5ec [<800ec0b0>] sys_ioctl+0x50/0x90 [<8006a3c4>] stack_done+0x20/0x40 Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34848	2012-12-22 12:12:40 +00:00
Gabor Juhos	a0b31f97bb	generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34846	2012-12-22 12:12:35 +00:00
Gabor Juhos	0767605d17	ar71xx: add kernel support for the TL-MR3220 v2 Based on the following patch: http://patchwork.openwrt.org/patch/3043/ [juhosg: - remove custom LED and button arrays - use separate machine specific patch - update Kconfig] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34779	2012-12-19 08:50:35 +00:00
Gabor Juhos	bc82db7d78	ar71xx: add kernel support for the NETGEAR WNDR4300 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34647	2012-12-12 16:49:49 +00:00
Gabor Juhos	75b71f4a74	ar71xx: add ap91_pci_init_simple helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34646	2012-12-12 16:49:48 +00:00
Gabor Juhos	1f7ae58a2c	ar71xx: ar934x_nfc: allow to control DMA data swap via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34588	2012-12-10 10:38:07 +00:00
Gabor Juhos	188908e885	ar71xx: make rb750_nand driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34279	2012-11-20 16:29:43 +00:00
Gabor Juhos	8194237789	ar71xx: make ar934x_nfc driver compatible with 3.7 Also add compatibility patches for the currently supported kernels. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34278	2012-11-20 16:29:42 +00:00
Gabor Juhos	46a3b818b9	ar71xx: remove buffer verification reference from rb4xx_nand.c It is a dead code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34276	2012-11-20 14:40:22 +00:00
Gabor Juhos	d833ca527d	ar71xx: restore rb4xx kernel partition size to the original value The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34274	2012-11-20 12:17:45 +00:00
Gabor Juhos	d44d954dec	ar71xx: add kernel support for the RB435G board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34239	2012-11-18 10:18:01 +00:00
Gabor Juhos	d62bddc620	ar71xx: update PCI IRQ map for RB4xx devices Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34238	2012-11-18 09:51:04 +00:00
Gabor Juhos	8d4857d677	ar71xx: add kernel support for the OpenMesh MR600 board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34231	2012-11-18 09:32:33 +00:00
Gabor Juhos	91bab828aa	ar71xx: add support for TP-Link TL-WA7510N It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34187	2012-11-13 14:48:00 +00:00
Gabor Juhos	f2528b1792	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34087	2012-11-05 13:23:27 +00:00
Gabor Juhos	ed35253f4c	ar71xx: don't use the unknown LED on the ZCN-1523-5 board According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076	2012-11-04 22:08:54 +00:00
Gabor Juhos	7228a91a3b	ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33993	2012-10-29 17:24:30 +00:00
Gabor Juhos	a6549ac1cb	ar71xx: remove NO_AUTOINCR flag from the NAND drivers The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33971	2012-10-28 12:21:15 +00:00
Gabor Juhos	e2ec99889e	ar71xx: ag71xx: fix build_skb arguments for 3.6 Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33969	2012-10-27 17:11:06 +00:00
Gabor Juhos	d54c9653e9	ar71xx: add support for the Senao CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33956	2012-10-27 08:55:38 +00:00
Gabor Juhos	269872fe1e	ar71xx: use mtd_read in wrt160nl_part Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33951	2012-10-27 07:57:58 +00:00
Gabor Juhos	973eda6077	ar71xx: use mtd_read in tplinkpart Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33950	2012-10-27 07:57:57 +00:00
Gabor Juhos	f1f388d527	ar71xx: rw2458n - fix flash parts See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33867	2012-10-19 18:32:49 +00:00
Gabor Juhos	31387947c8	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33818	2012-10-17 18:27:47 +00:00
Gabor Juhos	5ffc08e3dc	ar71xx: add a helper function for setting up ETH_CFG register on AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33817	2012-10-17 18:27:45 +00:00
Gabor Juhos	c5a32cfc92	ar71xx: add support for the OpenMesh OM2P-HS board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33800	2012-10-17 08:26:01 +00:00
Gabor Juhos	196c6c5b45	ar71xx: add support for the TL-WR841N/ND v8 board SVN-Revision: 33621	2012-10-04 20:16:03 +00:00
Gabor Juhos	170cd7a19a	ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac SVN-Revision: 33575	2012-09-27 20:05:42 +00:00
Gabor Juhos	e7b1949d87	ar71xx: automatically find WLAN calibration data on TEW-673GRU SVN-Revision: 33539	2012-09-25 12:57:40 +00:00
Gabor Juhos	8ed8e51e74	ar71xx: automatically find WLAN calibration data on DIR-825-B1 SVN-Revision: 33538	2012-09-25 12:57:38 +00:00
Gabor Juhos	e70ad61e44	ar71xx: use different machtype and setup for the TL-MR3040 Should fix #12211. Compile tested only. SVN-Revision: 33535	2012-09-24 18:45:56 +00:00
Gabor Juhos	7c85646176	ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read SVN-Revision: 33454	2012-09-17 20:30:55 +00:00
Gabor Juhos	3bdf0bc36f	ar71xx: ar934x_nfc: increase DMA retry count SVN-Revision: 33453	2012-09-17 20:30:54 +00:00
Gabor Juhos	b7cb43f6a6	ar71xx: ar934x_nfc: optimize READOOB operation on large page devices SVN-Revision: 33452	2012-09-17 20:30:53 +00:00
Gabor Juhos	96dde2e591	ar71xx: ar934x_nfc: fix RNDOUT operation SVN-Revision: 33451	2012-09-17 20:30:51 +00:00
Gabor Juhos	338b698fb6	ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices SVN-Revision: 33450	2012-09-17 20:30:50 +00:00
Gabor Juhos	5804b9d1b7	ar71xx: register the NAND controller device on the RB2011 SVN-Revision: 33388	2012-09-13 07:26:26 +00:00
Gabor Juhos	4fd67c3cd4	ar71xx: add device registration code for the AR934x NAND flash controller SVN-Revision: 33387	2012-09-13 07:26:25 +00:00
Gabor Juhos	1e5fdbeae5	ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x SVN-Revision: 33385	2012-09-13 07:26:22 +00:00
Gabor Juhos	aa2f4d4c8d	ar71xx: add initial support for RB2011UAS-2HnD SVN-Revision: 33349	2012-09-09 14:05:32 +00:00
Gabor Juhos	3686e18727	ar71xx: use routerboot_find_tag to find wlan data offset on RB751 SVN-Revision: 33348	2012-09-09 14:05:30 +00:00
Gabor Juhos	ccabe4a1b4	ar71xx: add RouterBoot related helper routines SVN-Revision: 33347	2012-09-09 14:05:28 +00:00
Gabor Juhos	44bf7c7cc1	ar71xx: define MTD partitions for RB2011 SVN-Revision: 33345	2012-09-09 14:05:24 +00:00
Gabor Juhos	6ae5ec16e0	ar71xx: add preliminary support for Mikrotik RB2011L This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 33344	2012-09-09 14:05:22 +00:00
Gabor Juhos	94bac7366c	ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x SVN-Revision: 33343	2012-09-09 14:05:20 +00:00
Gabor Juhos	7592057774	ar71xx: add dynamic MDIO clock calculation SVN-Revision: 33342	2012-09-09 14:05:17 +00:00
Gabor Juhos	88a5478781	ar71xx: use the RLE library for RB751 SVN-Revision: 33338	2012-09-08 17:51:56 +00:00
Gabor Juhos	11c3392b7f	Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" That was based on assumptions. SVN-Revision: 33310	2012-08-29 10:37:55 +00:00
Gabor Juhos	eb9a97a360	ar71xx: all0315n: fix ethernet according to vendor info Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33309	2012-08-29 10:37:54 +00:00
Gabor Juhos	5fdbb33db4	ar71xx: Buffalo WZR-HP-AG300H LED support An improved LED support for Buffalo WZR-HP-AG300H. There will be two new packages to go with this patch (ar922x-led-fix-hotplug and ar922x-led-fix-init). These packages essentially perform the same task of disabling "JTAG over GPIO pins" function which is currently required for LEDs on AR922x emac GPIO to work, and are both considered a temporary fix that circumvent this problem. [juhosg: add the hotplug script from the proposed ar922x-led-fix-hotplug package to ar71xx/base-files] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33294	2012-08-29 10:11:55 +00:00
Gabor Juhos	eebdd633e4	ar71xx: add support for the Allnet ALL0315N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33281	2012-08-27 14:55:31 +00:00
Gabor Juhos	cca873e8e0	ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33280	2012-08-27 14:55:26 +00:00
Gabor Juhos	8b3d95bba9	ar71xx: add support for the TRENDnet TEW-712BR board SVN-Revision: 33231	2012-08-22 20:09:13 +00:00
Gabor Juhos	2811d6c183	ar71xx: fix comment style in mach-tl-wr2543n.c SVN-Revision: 33227	2012-08-22 12:42:59 +00:00
Gabor Juhos	5a694e09c8	ar71xx: add ALL0305 board alias For the pure convenience of having a correctly named image and system name in /proc/cpuinfo , until we can do that by having system names in DTS... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33224	2012-08-22 12:33:22 +00:00
Gabor Juhos	0517183b9c	ar71xx: add support for TP-Link TL-WDR3600 The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has only two antennas. [juhosg: remove the custom machine type, change the board name instead] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 33219	2012-08-22 09:43:18 +00:00
John Crispin	968ac3fd03	add led defintion for the WR2543 5GHz WLAN LED Signed-off-by: Andy Leiserson <andy@leiserson.org> SVN-Revision: 33215	2012-08-22 09:10:24 +00:00
Gabor Juhos	79a8660d67	ar71xx: init switch hw_reset on the TL-WR1043ND board SVN-Revision: 32944	2012-08-02 09:54:28 +00:00
Gabor Juhos	563400ef10	ar71xx: ew-dorin: added router firmware generation [juhosg: remove dead code] Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de> SVN-Revision: 32934	2012-08-01 12:24:57 +00:00
Gabor Juhos	010aec0619	ar71xx: Buffalo WLAE-AG300N initial support The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32931	2012-08-01 12:24:52 +00:00
Gabor Juhos	7c932579fa	ar71xx: make 2.4GHz wlan LED work on the WR2543N Because ath9k does not supports separate LEDs for different bands yet, the 2.4GHz LED will show the activity, even if the 5GHz band is selected. SVN-Revision: 32615	2012-07-05 16:25:26 +00:00
Gabor Juhos	797944d3f1	ar71xx: add support for the OpenMesh OM2P-LC board Patch-by: Marek Linder <marek@open-mesh.com> SVN-Revision: 32611	2012-07-05 08:26:53 +00:00
Gabor Juhos	d1b237b335	ar71xx: add initial support for the QCA955X SoCs SVN-Revision: 32606	2012-07-05 08:26:47 +00:00
Gabor Juhos	b8618fd3f2	ar71xx: improve MDIO busy wait code SVN-Revision: 32586	2012-07-03 15:24:02 +00:00
Gabor Juhos	86013d40d5	ar71xx: remove the built-in MTD map of the ALL0258N Pass the mtd_layout via the kernel command line instead. Also increase the kernel partition size to 1024k, so current kernel can fit in. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32585	2012-07-03 15:24:01 +00:00
Gabor Juhos	8b9931fd27	ar71xx: add support for the TL-WDR4300 board SVN-Revision: 32459	2012-06-19 11:51:17 +00:00
Gabor Juhos	f509a87f2d	ar71xx: remove superfluous include of asm/mach-ath79/pci.h SVN-Revision: 32455	2012-06-19 10:13:43 +00:00
Gabor Juhos	1a1121158f	ar71xx: add a common function to configure USB power GPIOs SVN-Revision: 32454	2012-06-19 10:13:41 +00:00
Felix Fietkau	26cf21df02	ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) SVN-Revision: 32447	2012-06-19 00:22:04 +00:00
Felix Fietkau	dddf321b6e	ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection SVN-Revision: 32336	2012-06-13 12:54:22 +00:00
Felix Fietkau	73b8805e78	ar71xx: fix PHY setup on TL-MR3020 (fixes #11572 ) SVN-Revision: 32093	2012-06-06 17:24:12 +00:00
Felix Fietkau	dc9675282e	ar71xx: add a helper function for setting up PHY4 swapping on ar933x SVN-Revision: 32092	2012-06-06 17:24:09 +00:00
Felix Fietkau	a9cd8446f3	ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality SVN-Revision: 31956	2012-05-28 20:39:50 +00:00
Felix Fietkau	367e4b3994	ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack SVN-Revision: 31934	2012-05-28 02:55:59 +00:00
Felix Fietkau	8039a1bbb2	ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x SVN-Revision: 31925	2012-05-27 21:02:41 +00:00
Gabor Juhos	013f434f5b	ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD Patch by Kamil Trzciński <ayufan@osk-net.pl> SVN-Revision: 31846	2012-05-23 21:05:25 +00:00
Felix Fietkau	a3f2fd187b	ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) SVN-Revision: 31736	2012-05-15 10:36:39 +00:00
Felix Fietkau	0ff3c396d3	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes SVN-Revision: 31637	2012-05-06 21:19:14 +00:00
Gabor Juhos	ab897ab04e	ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608	2012-05-05 17:02:35 +00:00
Gabor Juhos	3e3a4d3d6b	ar71xx: allow to disable link polling on unused PHYs SVN-Revision: 31533	2012-04-29 18:29:24 +00:00
Gabor Juhos	a447f1810c	ar71xx: enable MIB counters in the built-in switch of the AR934x SVN-Revision: 31476	2012-04-25 13:02:11 +00:00
Gabor Juhos	408de85883	ar71xx: use ap91_pci_init for RB751{,G} SVN-Revision: 31356	2012-04-19 21:31:48 +00:00
Gabor Juhos	0a9832b50d	ar71xx: move USB device registration directly into rb751{,g}_setup SVN-Revision: 31355	2012-04-19 21:31:43 +00:00
Gabor Juhos	78967e6640	ar71xx: add ap9x_pci_get_wmac_data helper SVN-Revision: 31354	2012-04-19 21:31:42 +00:00
Gabor Juhos	5c9ca38e47	ar71xx: add sanity checks to decode_rle Also use -EINVAL instead of -1. SVN-Revision: 31353	2012-04-19 21:31:40 +00:00
Gabor Juhos	e295a077ce	ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD Great collaboration on these two fantastic routers on the openwrt forum: https://forum.openwrt.org/viewtopic.php?id=32320 Above all kudos to aryufan. Well done and thank you everyone else who contributed. To-Do: LED for wlan is not yet activated To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by the router Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com> [juhosg: fix line wrapped patch, fix checkpatch errors, add missing kernel patches] SVN-Revision: 31208	2012-04-06 06:45:07 +00:00
Gabor Juhos	b77217d963	ar71xx: boost SPI flash read performance mtd_speedtest results: page read speed old new delta DB120 929 KiB/s 2597 KiB/s +179.55% TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27% TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08% TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44% TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66% TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57% ALFA-AP96 702 KiB/s 1977 KiB/s +181.62% WNDR3700 697 KiB/s 1965 KiB/s +181.92% SVN-Revision: 31118	2012-03-27 19:38:17 +00:00
Gabor Juhos	6cd5fb7001	ar71xx: remove the built-in MTD map of the AP96 board Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31112	2012-03-27 19:38:07 +00:00
Gabor Juhos	61ee283899	ar71xx: remove the built-in MTD map of the PB92 board Pass the mtd_layout via the kernel command line instead SVN-Revision: 31111	2012-03-27 19:38:05 +00:00
Gabor Juhos	1094dc1996	ar71xx: remove the built-in MTD map of the Zcomax devices Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31110	2012-03-27 19:38:04 +00:00
Gabor Juhos	87e4ec687b	ar71xx: remove the built-in MTD maps of several boards We are passing the MTD layout via the kernel command line, so it makes no sense to duplicate it in mach-* files. The patch removes the built-in MTD maps of the following boards: * AP113 * ALFA N2/N5 * DIR-600 * DIR-615 * DIR-825 * TEW-6{3,5}2BRP * TEW-673GRU * WHR-G301N * WHR-HP-GN * WHR-HP-G300N SVN-Revision: 31108	2012-03-27 19:38:01 +00:00
Gabor Juhos	f4d1e3d147	ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 SVN-Revision: 31102	2012-03-27 19:37:51 +00:00
Gabor Juhos	8a2e4b49de	ar71xx: add initial support for RB750GL SVN-Revision: 31025	2012-03-19 15:57:04 +00:00
Gabor Juhos	d19f3dd512	ar71xx: make rb750_latch_change 'static void' SVN-Revision: 31024	2012-03-19 15:57:03 +00:00
Gabor Juhos	5348f46c80	ar71xx: add latch_change field to rb750_led_platform_data SVN-Revision: 31023	2012-03-19 15:57:01 +00:00
Gabor Juhos	8a471efe01	ar71xx: add platform data for the RB750 NAND driver SVN-Revision: 31022	2012-03-19 15:56:59 +00:00
Gabor Juhos	e9b45ebaba	ar71xx: add AR934x specific interface speed setup for ge0 SVN-Revision: 31017	2012-03-19 11:11:20 +00:00
Gabor Juhos	6036151187	ar71xx: add support for the jjPlus JA76PF2 board SVN-Revision: 30957	2012-03-16 18:00:34 +00:00
Gabor Juhos	a680662391	ar71xx: change LED name prefix on the jjplus boards SVN-Revision: 30956	2012-03-16 18:00:26 +00:00
Gabor Juhos	c00b53f3d0	ar71xx: move micrel PHY driver to the generic linux target SVN-Revision: 30946	2012-03-15 09:25:53 +00:00
Gabor Juhos	ff909edf94	ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports SVN-Revision: 30926	2012-03-13 17:29:38 +00:00
Gabor Juhos	cd6a4cde13	ar71xx: ag71xx: start aneg on switch PHYs after reset SVN-Revision: 30925	2012-03-13 17:29:37 +00:00
Gabor Juhos	7c9534cfd7	ar71xx: ag71xx: poll PHY status of all available switch ports SVN-Revision: 30924	2012-03-13 17:29:36 +00:00
Gabor Juhos	8449eecf5f	ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch SVN-Revision: 30923	2012-03-13 17:29:34 +00:00
Gabor Juhos	1c5ac02a29	ar71xx: reset the switch on AR934x before ethernet device registration SVN-Revision: 30922	2012-03-13 17:29:33 +00:00
Gabor Juhos	66df117d1b	ar71xx: use a dummy callback for interfaces with fixed speed SVN-Revision: 30913	2012-03-12 20:38:58 +00:00
Gabor Juhos	8b2b37ae58	ar71xx: merge ar934x_bo_ddr_flush patch SVN-Revision: 30912	2012-03-12 20:38:57 +00:00
Gabor Juhos	2d89fa7f43	ar71xx: fix WPS button polarity on TL-WR2543N SVN-Revision: 30849	2012-03-07 19:50:53 +00:00
Gabor Juhos	c455a0f7be	ar71xx: ag71xx: fix get_port_link callback SVN-Revision: 30841	2012-03-07 16:32:35 +00:00
Gabor Juhos	5a83b3a5c7	ar71xx: ag71xx: use the generic get_port_link implementation SVN-Revision: 30840	2012-03-07 16:32:34 +00:00
Gabor Juhos	7052847972	ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled SVN-Revision: 30768	2012-03-01 19:49:05 +00:00
Gabor Juhos	766999085a	ar71xx: ag71xx: add BQL support It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> SVN-Revision: 30417	2012-02-10 14:56:47 +00:00
Gabor Juhos	32a18a05f8	ar71xx: add preliminary support for 3.3 SVN-Revision: 30410	2012-02-10 11:53:56 +00:00
Gabor Juhos	fe0c7aac66	ar71xx: merge 3.2 fixes SVN-Revision: 30406	2012-02-10 08:19:33 +00:00
Gabor Juhos	d72bde99cd	ar71xx: merge files-3.2 to files SVN-Revision: 30405	2012-02-10 08:19:31 +00:00
Gabor Juhos	d5d37febb4	ar71xx: use dynamically allocated partitions in wrt160nl_part SVN-Revision: 29970	2012-01-31 18:36:51 +00:00
Gabor Juhos	386cbfe45b	ar71xx: move arch specific files to files-2.6.39 SVN-Revision: 29867	2012-01-22 22:38:11 +00:00
Gabor Juhos	e7dee3aeed	ar71xx: wrt160nl_part: include module.h and fix compiler warnings SVN-Revision: 29856	2012-01-22 17:55:38 +00:00
Gabor Juhos	a7d344565b	ar71xx: tplinkpart: include module.h SVN-Revision: 29855	2012-01-22 17:55:36 +00:00
Gabor Juhos	6c2638c5e2	ar71xx: rename vsc7385 spi driver SVN-Revision: 29853	2012-01-22 13:51:57 +00:00
Gabor Juhos	bb16739db9	ar71xx: rename ap81 spi driver SVN-Revision: 29852	2012-01-22 13:51:56 +00:00
Gabor Juhos	5ef8b922fa	ar71xx: rename rb4xx spi drivers SVN-Revision: 29851	2012-01-22 13:51:54 +00:00
Gabor Juhos	aad175d5b6	ar71xx: rename the nxp_74hc153 driver SVN-Revision: 29850	2012-01-22 13:51:52 +00:00
Gabor Juhos	ef1c53b7b7	ar71xx: change board id of the UniFi board SVN-Revision: 29849	2012-01-22 13:51:50 +00:00
Gabor Juhos	f90e578903	ar71xx: include linux/module.h in the micrel phy driver SVN-Revision: 29848	2012-01-22 13:51:49 +00:00
Gabor Juhos	fbf81c8e79	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c SVN-Revision: 29713	2012-01-11 18:00:50 +00:00
Gabor Juhos	88d8cdd503	ar71xx: pb44_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29710	2012-01-11 09:14:18 +00:00
Gabor Juhos	e1b7995aef	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove SVN-Revision: 29709	2012-01-11 09:14:17 +00:00
Gabor Juhos	67444c7795	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers SVN-Revision: 29708	2012-01-11 09:14:15 +00:00
Gabor Juhos	0f566a376c	ar71xx: ar71xx_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29707	2012-01-11 09:14:14 +00:00
Gabor Juhos	09a6e3f662	ar71xx: ar71xx_spi: save and restore regs from probe/remove SVN-Revision: 29706	2012-01-11 09:14:13 +00:00
Gabor Juhos	714a9bd641	ar71xx: ar71xx_wdt: add shutdown handler SVN-Revision: 29705	2012-01-11 09:14:11 +00:00
Gabor Juhos	a1dcbc66a6	ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680	2012-01-07 19:36:35 +00:00
Gabor Juhos	67b2814842	ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675	2012-01-07 17:24:44 +00:00
Gabor Juhos	1e848b17ad	ar71xx: add support for Redwave RW2458N Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669	2012-01-06 07:20:59 +00:00
Gabor Juhos	8eb0b7ab3d	ar71xx: fix sections mismatch warnings in the nand drivers SVN-Revision: 29667	2012-01-05 18:08:33 +00:00
Gabor Juhos	b8f0d86115	ar71xx: add inital support for the ALFA Network AP96 board The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662	2012-01-04 21:13:54 +00:00
Gabor Juhos	923f3e3752	ar71xx: allow to use the command line hack on compex devices SVN-Revision: 29659	2012-01-04 17:30:58 +00:00
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00
Jo-Philipp Wich	ebefe1eb3a	the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649 ) SVN-Revision: 29593	2011-12-21 01:27:48 +00:00
Felix Fietkau	11013ad947	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 SVN-Revision: 29568	2011-12-19 09:04:15 +00:00
Felix Fietkau	0cc056cb7e	ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567	2011-12-18 22:20:17 +00:00
Gabor Juhos	67c7980290	ar71xx: connect GMAC0 to the internal switch on DB120 Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557	2011-12-15 22:25:38 +00:00
Gabor Juhos	5bbd416e38	ar71xx: add defines for the AR934X GMAC interface SVN-Revision: 29556	2011-12-15 22:25:36 +00:00
Gabor Juhos	e47a8c2bb2	ar71xx: fix GMAC1 interface speed on the DB120 board SVN-Revision: 29555	2011-12-15 22:25:35 +00:00
Gabor Juhos	36bc2c2c80	ar71xx: ag71xx: fix switch port setup for AR934X SVN-Revision: 29554	2011-12-15 22:25:32 +00:00
Gabor Juhos	00667c3846	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X SVN-Revision: 29553	2011-12-15 22:25:30 +00:00
Gabor Juhos	0540970345	ar71xx: ag71xx: setup switch interface mode on AR934X SVN-Revision: 29552	2011-12-15 22:25:29 +00:00
Gabor Juhos	44014110b8	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs SVN-Revision: 29551	2011-12-15 22:25:28 +00:00
Gabor Juhos	e2a546d475	ar71xx: allow to attach the internal switch for AR934x SVN-Revision: 29550	2011-12-15 22:25:22 +00:00
Gabor Juhos	9ae65588d8	ar71xx: introduce ar71xx_switch_data SVN-Revision: 29549	2011-12-15 22:25:11 +00:00
Gabor Juhos	850be54b72	ar71xx: tplinkpart: allow to detect JFFS2 as well SVN-Revision: 29543	2011-12-15 22:03:40 +00:00
Gabor Juhos	b7d7481b07	ar71xx: ag71xx: check PHY IDs before accessing the switch registers SVN-Revision: 29541	2011-12-15 13:25:23 +00:00
Gabor Juhos	0655552860	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x SVN-Revision: 29540	2011-12-15 13:25:21 +00:00
Gabor Juhos	204fc6bed5	ar71xx: ag71xx: nuke ar7240sw_init SVN-Revision: 29539	2011-12-15 13:25:20 +00:00
Gabor Juhos	d1f7783612	ar71xx: fix mac addresses on jjPlus devices SVN-Revision: 29538	2011-12-15 13:25:18 +00:00
Gabor Juhos	b9c5cb5c9a	ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535	2011-12-14 20:54:10 +00:00
Gabor Juhos	66c8cc0f6d	ar71xx: add GPIO function bit defines for AR933X SVN-Revision: 29534	2011-12-14 20:54:07 +00:00
Felix Fietkau	7076d74b21	ar71xx: fix gpio count for ar7241/ar7242 SVN-Revision: 29532	2011-12-14 20:47:24 +00:00
Felix Fietkau	b878f4a927	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h SVN-Revision: 29531	2011-12-14 20:21:42 +00:00
Felix Fietkau	4a441570ca	kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets SVN-Revision: 29516	2011-12-13 15:14:59 +00:00
Felix Fietkau	3806671fe5	ar71xx: fix wireless led on wzr-hp-g450h SVN-Revision: 29515	2011-12-13 15:00:43 +00:00
Gabor Juhos	2dd7dfb1c9	ar71xx: enable AR9341 support at setup.c Patch-by: dyq <729650915@qq.com> SVN-Revision: 29514	2011-12-13 14:59:43 +00:00
Gabor Juhos	058998acdb	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513	2011-12-13 14:59:40 +00:00
Felix Fietkau	48f9717371	ar71xx: add gpios and usb for wzr-hp-g450h SVN-Revision: 29509	2011-12-13 13:33:44 +00:00
Gabor Juhos	4ca2d86493	ar71xx: use RedBoot parser on PB44 SVN-Revision: 29501	2011-12-11 15:52:47 +00:00
Gabor Juhos	bdc2eca7de	ar71xx: use correct mac on the lan interface on several TP-LINK devices SVN-Revision: 29458	2011-12-05 21:10:58 +00:00
Gabor Juhos	0103069372	ar71xx: allow to pass negative offset values for ar71xx_init_mac SVN-Revision: 29457	2011-12-05 21:10:55 +00:00
Gabor Juhos	ada92aee62	ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set SVN-Revision: 29456	2011-12-05 18:21:15 +00:00
Gabor Juhos	3e7a6d182a	ar71xx: check squashfs signature in TP-Link mtd parser SVN-Revision: 29446	2011-12-05 14:52:33 +00:00
Felix Fietkau	1f809532de	ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441	2011-12-05 14:20:51 +00:00
Felix Fietkau	d1f63f8538	ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well SVN-Revision: 29440	2011-12-05 14:20:44 +00:00
Gabor Juhos	4cc2b9bb06	ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434	2011-12-05 13:03:54 +00:00
Gabor Juhos	7cfa39f032	ar71xx: use the tp-link parser on the tp-link boards Also remove static partition maps. SVN-Revision: 29416	2011-12-03 18:13:31 +00:00
Gabor Juhos	514b1167c9	ar71xx: add mtd partition parser for the TP-Link boards SVN-Revision: 29415	2011-12-03 18:13:27 +00:00
Gabor Juhos	fc7fb29bae	ar71xx: run the RedBoot parser only on the RedBoot based boards SVN-Revision: 29414	2011-12-03 18:13:25 +00:00
Gabor Juhos	9cc28d5aa0	ar71xx: run the MyLoader parser only on the WP543 board SVN-Revision: 29413	2011-12-03 18:13:23 +00:00
Gabor Juhos	67a0b9aada	ar71xx: run the wrt160nl parser only on the WRT160NL board Also remove static mtd partition definitions. SVN-Revision: 29412	2011-12-03 18:13:20 +00:00
Gabor Juhos	f188f1bad5	ar71xx: add support for Ubiquiti AirRouter Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395	2011-12-01 22:49:02 +00:00
Gabor Juhos	f20797306a	ar71xx: modify phy mask of the WP543 board This fixes ethernet on newer boards. Based on a patch from #9702. SVN-Revision: 29328	2011-11-24 20:09:43 +00:00
Gabor Juhos	c20d7378e5	ar71xx: fix wndr3800 machine name This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326	2011-11-24 20:09:38 +00:00
Gabor Juhos	9990523a0f	ar71xx: set GE0 phy_mask for AR933x SVN-Revision: 29274	2011-11-20 11:30:10 +00:00
Gabor Juhos	f27548448b	ar71xx: fix USB LED on the DB120 board SVN-Revision: 29126	2011-11-14 17:43:15 +00:00
Gabor Juhos	6ebbb1329d	ar71xx: add a function for selecting output signal on a given GPIO pin SVN-Revision: 29125	2011-11-14 17:43:14 +00:00
Gabor Juhos	0c1d3617d7	ar71xx: fix GPIO function handling on AR934x SVN-Revision: 29124	2011-11-14 17:43:13 +00:00
Gabor Juhos	aa0c8c4885	ar71xx: add AR71XX_ prefix to GPIO_REG_* defines SVN-Revision: 29123	2011-11-14 17:43:11 +00:00
Gabor Juhos	62a7795afd	ar71xx: merge nand scan patch SVN-Revision: 29122	2011-11-14 17:43:10 +00:00
Gabor Juhos	12dae96097	ar71xx: fix a compiler warning SVN-Revision: 29110	2011-11-14 13:07:47 +00:00
Gabor Juhos	5ae0fd802c	ar71xx: fix GPIO count for AR934x SVN-Revision: 29109	2011-11-14 13:07:45 +00:00
Gabor Juhos	e52269364a	ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X SVN-Revision: 29108	2011-11-14 11:49:53 +00:00
Gabor Juhos	3104d70552	ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling SVN-Revision: 29107	2011-11-14 11:49:51 +00:00
Gabor Juhos	42e8ae09b5	ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines SVN-Revision: 29106	2011-11-14 11:49:49 +00:00
Gabor Juhos	c15caea360	ar71xx: add an irq parameter for ar724x_pcibios_init SVN-Revision: 29105	2011-11-14 11:49:47 +00:00
Gabor Juhos	cf90b24bb9	ar71xx: remove hardwired interface parameters from mach-* files SVN-Revision: 29103	2011-11-14 07:38:09 +00:00
Gabor Juhos	defc79cb40	ar71xx: force hardwired interface parameters in ar71xx_add_device_eth SVN-Revision: 29102	2011-11-14 07:38:07 +00:00
Gabor Juhos	6f4bc1ce37	ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth SVN-Revision: 29101	2011-11-14 07:38:05 +00:00
Gabor Juhos	368bbc510b	ar71xx: enable has_gbit flag on AR724{0,1} SVN-Revision: 29026	2011-11-13 17:36:36 +00:00
Gabor Juhos	15d7016c9f	ar71xx: fixup onboard PCIe chip registration on the DB120 board SVN-Revision: 29022	2011-11-13 12:48:03 +00:00
Gabor Juhos	f623066e60	ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed SVN-Revision: 29021	2011-11-13 12:48:01 +00:00
Gabor Juhos	d2316b2a45	ar71xx: ag71xx: add support for getting switch port link status SVN-Revision: 29017	2011-11-13 11:27:04 +00:00
Gabor Juhos	d0db89133c	ar71xx: remove mii_ctrl resources of the ethernet devices SVN-Revision: 29016	2011-11-13 11:27:03 +00:00
Gabor Juhos	34015ed6e8	ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx SVN-Revision: 29015	2011-11-13 11:27:01 +00:00
Gabor Juhos	2d882cff23	ar71xx: ag71xx: remove unused mii_cfg related functions and defines SVN-Revision: 29014	2011-11-13 11:27:00 +00:00
Gabor Juhos	538a9493b9	ar71xx: set MII interface speed from the set_speed callbacks SVN-Revision: 29013	2011-11-13 11:26:59 +00:00
Gabor Juhos	93cd46be13	ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data Also rename the corresponding callback functions. SVN-Revision: 29012	2011-11-13 11:26:57 +00:00
Gabor Juhos	9579bb4267	ar71xx: ag71xx: remove MII interface setup code SVN-Revision: 29011	2011-11-13 11:26:56 +00:00
Gabor Juhos	da64ce8603	ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode SVN-Revision: 29010	2011-11-13 11:26:54 +00:00
Gabor Juhos	5ad763075e	ar71xx: use the button for WPS control on the DB120 SVN-Revision: 28990	2011-11-12 12:50:20 +00:00
Gabor Juhos	4555be2bec	ar71xx: register the second ethernet interface on the DB120 board SVN-Revision: 28989	2011-11-12 12:50:19 +00:00
Gabor Juhos	368c6605a0	ar71xx: implement SoC specific phy interface setup SVN-Revision: 28988	2011-11-12 12:50:18 +00:00
Gabor Juhos	21d317b9cc	ar71xx: move phy interface setup into a separate function SVN-Revision: 28987	2011-11-12 12:50:16 +00:00
Gabor Juhos	aff0c84ffa	ar71xx: register both MDIO bus on the DB120 board SVN-Revision: 28986	2011-11-12 12:09:59 +00:00
Gabor Juhos	b144249108	ar71xx: add AR934X specific MDIO registration code SVN-Revision: 28985	2011-11-12 12:09:56 +00:00
Gabor Juhos	f835106c8c	ar71xx: add a secondary mdio bus SVN-Revision: 28984	2011-11-12 12:09:54 +00:00
Gabor Juhos	90a42da270	ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* SVN-Revision: 28983	2011-11-12 12:09:50 +00:00
Gabor Juhos	9daa2149fd	ar71xx: add an id argument to ar71xx_add_device_mdio SVN-Revision: 28982	2011-11-12 12:09:48 +00:00
Gabor Juhos	b07b687aec	ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa SVN-Revision: 28981	2011-11-12 12:09:42 +00:00
Gabor Juhos	a9216bb76e	ar71xx: add AR934x specific USB setup SVN-Revision: 28980	2011-11-12 10:54:20 +00:00
Gabor Juhos	346e44105a	ar71xx: register the first ethernet interface on the DB120 board SVN-Revision: 28979	2011-11-12 10:54:18 +00:00
Gabor Juhos	b1ba5e2f3d	ar71xx: allow to register ethernet interfaces for AR934X SVN-Revision: 28978	2011-11-12 10:54:17 +00:00
Gabor Juhos	2f9e535e89	ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered SVN-Revision: 28977	2011-11-12 10:54:16 +00:00
Gabor Juhos	e962b07c8b	ar71xx: add AR934X specific bootstrap and reset register bits SVN-Revision: 28976	2011-11-12 10:54:15 +00:00
Gabor Juhos	d8db8e94c8	ar71xx: fix GPIO direction setup for AR934x SVN-Revision: 28974	2011-11-12 10:54:09 +00:00
Gabor Juhos	43e993e5f5	ar71xx: fix AR934X clock frequency calculation SVN-Revision: 28973	2011-11-12 10:54:08 +00:00
Felix Fietkau	7a2efd8c28	ar71xx: remove dead code SVN-Revision: 28851	2011-11-08 00:33:20 +00:00
Felix Fietkau	94309039b7	ar71xx: on ar7240, exclude ports from their own port vlan destination mask SVN-Revision: 28850	2011-11-08 00:33:15 +00:00
Gabor Juhos	a801d620a7	ar71xx: add support for the Buffalo WHR-HP-GN board SVN-Revision: 28805	2011-11-07 12:59:10 +00:00
Gabor Juhos	4509af17ed	ar71xx: add support for the Buffalo WHR-G301N board SVN-Revision: 28803	2011-11-07 12:59:07 +00:00
Gabor Juhos	4aace1e2e3	ar71xx: fix WHR-HP-G300N MTD partitions SVN-Revision: 28800	2011-11-07 12:59:03 +00:00
Gabor Juhos	4c985724af	ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 SVN-Revision: 28709	2011-11-01 14:38:12 +00:00
Gabor Juhos	91f08d47c2	ar71xx: add initial support for the TL-WR741ND v4 board The ethernet port LEDs are not working yet. SVN-Revision: 28706	2011-11-01 11:20:52 +00:00
Gabor Juhos	21e651c9a1	ar71xx: add AR933X GMAC register defines SVN-Revision: 28705	2011-11-01 11:20:50 +00:00
Gabor Juhos	f372620ffa	ar71xx: unify LED names on Planex boards SVN-Revision: 28703	2011-11-01 11:20:47 +00:00
Gabor Juhos	66ab406d5a	ar71xx: unify LED names on Buffalo boards SVN-Revision: 28702	2011-11-01 11:20:46 +00:00
Gabor Juhos	e7586959df	ar71xx: unify LED names on TP-Link boards SVN-Revision: 28701	2011-11-01 11:20:44 +00:00
Gabor Juhos	1646346798	ar71xx: add initial support for the OpenMesh OM2P board Based on a patch by Marek Lindner <marek@open-mesh.com> SVN-Revision: 28617	2011-10-27 07:54:51 +00:00
Gabor Juhos	d02f22fea1	ar71xx/all0258n: fix partition layout A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28615	2011-10-27 07:54:47 +00:00
Gabor Juhos	9d51cda2db	ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567	2011-10-24 21:49:26 +00:00
Gabor Juhos	d96e321bd1	ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564	2011-10-24 21:49:21 +00:00
Jonas Gorski	a136b67604	linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423	2011-10-11 23:05:16 +00:00
Jonas Gorski	c674c874b7	ag71xx: close a race between the phy state machine and link state A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380	2011-10-08 11:37:14 +00:00
Gabor Juhos	6ac4156136	ar71xx: fix MAC addresses on the DIR-825-B1 board Patch-by: Lukas Kuna SVN-Revision: 28295	2011-09-23 19:56:39 +00:00
Gabor Juhos	733399600f	ar71xx: add support for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28277	2011-09-21 11:47:53 +00:00
Gabor Juhos	d3617ac7d3	ar71xx: add AR933x specific USB setup function SVN-Revision: 28276	2011-09-21 11:47:51 +00:00
Gabor Juhos	91340d8af7	ar71xx: add ar71xx_device_reset_rmw helper SVN-Revision: 28275	2011-09-21 11:47:50 +00:00
Gabor Juhos	079e746fc4	ar71xx: remove 'default [yn]' from machine Kconfig entries SVN-Revision: 28273	2011-09-21 11:47:47 +00:00
Gabor Juhos	73dac07c44	ar71xx: sort AR71XX_MACH_* entries SVN-Revision: 28272	2011-09-21 11:47:45 +00:00
Felix Fietkau	1bdf65f580	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) SVN-Revision: 28213	2011-09-11 17:44:12 +00:00
Felix Fietkau	65d809ef19	ar71xx: do not count normal interrupts as spurious (fixes #10037 ) SVN-Revision: 28182	2011-09-06 05:38:23 +00:00
Felix Fietkau	cd2c68501c	ar71xx: fix ethernet PLL setting on ar7242 SVN-Revision: 28124	2011-08-29 21:23:46 +00:00
Felix Fietkau	12c84f8eeb	ar71xx: add some code to detect DMA stuck conditions on ar7240 SVN-Revision: 27975	2011-08-13 22:30:14 +00:00
Felix Fietkau	85ccc74e1b	ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues SVN-Revision: 27973	2011-08-13 21:49:46 +00:00
Felix Fietkau	d26bb6c59c	ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922 ) SVN-Revision: 27959	2011-08-11 13:52:40 +00:00
Felix Fietkau	4b75394056	ar71xx: fix ethernet FIFO state corruption on ar7240 When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 SVN-Revision: 27896	2011-08-04 17:36:31 +00:00
Felix Fietkau	d2aeca6b6d	ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done SVN-Revision: 27895	2011-08-04 17:36:27 +00:00
Felix Fietkau	500c3a1475	ar71xx: fix MAC/MDIO reset mask handling SVN-Revision: 27894	2011-08-04 17:36:23 +00:00
Jonas Gorski	e18ceb1dac	ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814	2011-07-28 11:57:51 +00:00
Felix Fietkau	9e4113b493	ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh SVN-Revision: 27756	2011-07-24 14:40:35 +00:00
Felix Fietkau	1afe8a0726	rtl8366: unify rtl8366s and rtl8366rb platform data SVN-Revision: 27754	2011-07-24 14:40:23 +00:00
Felix Fietkau	9105dad418	ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684 ) SVN-Revision: 27739	2011-07-24 08:02:20 +00:00
Felix Fietkau	c7173a211d	ar71xx: reinitialize global switch settings after reset on ar7240 SVN-Revision: 27705	2011-07-20 14:39:47 +00:00
Felix Fietkau	ca473833c4	ar71xx: configure address aging on ar7240 SVN-Revision: 27704	2011-07-20 14:39:42 +00:00
Felix Fietkau	fefc79f3cb	ar71xx: reset the phy in the ethernet init on ar724x SVN-Revision: 27703	2011-07-20 12:04:34 +00:00
Felix Fietkau	005fe5d1fd	ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset SVN-Revision: 27702	2011-07-20 12:04:29 +00:00
Felix Fietkau	e7ab000008	ar71xx: increase the delay after the ethernet MAC reset SVN-Revision: 27701	2011-07-20 12:04:25 +00:00
Felix Fietkau	255dcaa3a6	ar71xx: fix an unused variable warning SVN-Revision: 27700	2011-07-20 12:04:20 +00:00
Felix Fietkau	f3d693c0ee	ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state SVN-Revision: 27568	2011-07-09 06:30:13 +00:00
Felix Fietkau	2806c75c07	ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 SVN-Revision: 27567	2011-07-09 06:29:46 +00:00
Gabor Juhos	f9e4619b97	ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code The config option has been removed in 2.6.39. SVN-Revision: 27320	2011-06-30 12:15:33 +00:00
Gabor Juhos	d98476c6bd	ar71xx: merge 2.6.39 patches Also remove the old UART driver for ar933x. SVN-Revision: 27314	2011-06-29 08:57:37 +00:00
Gabor Juhos	6627574e57	ar71xx: add 2.6.39 support SVN-Revision: 27310	2011-06-29 08:57:32 +00:00
Gabor Juhos	1e138098cd	ar71xx: remove ar71xx_gpio_irq_set_type SVN-Revision: 27309	2011-06-29 08:57:30 +00:00
Gabor Juhos	055e317ed8	ar71xx: add separate handlers for IP3 interrupts SVN-Revision: 27308	2011-06-29 08:57:29 +00:00
Gabor Juhos	59bff8bf18	ar71xx: use separate handlers for IP2 interrupts SVN-Revision: 27307	2011-06-29 08:57:28 +00:00
Gabor Juhos	9d6af600e1	ar71xx: remove useless irq_desc.status initializations SVN-Revision: 27306	2011-06-29 08:57:27 +00:00
Felix Fietkau	ed7f41792a	ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608 ) SVN-Revision: 27282	2011-06-25 13:48:47 +00:00
Gabor Juhos	e6af77a1c8	ar71xx: cleanup AR933X UART driver SVN-Revision: 27222	2011-06-19 13:17:51 +00:00
Gabor Juhos	066e04d497	ar71xx: fix uart clock frequency for AR933X SVN-Revision: 27221	2011-06-19 13:17:50 +00:00
Gabor Juhos	b7e016ba42	ar71xx: use ar933x_uart.h in the AR933X serial driver SVN-Revision: 27166	2011-06-13 08:12:40 +00:00
Gabor Juhos	b58ede16a5	ar71xx: update early_printk code SVN-Revision: 27165	2011-06-13 08:12:38 +00:00
Gabor Juhos	13363d9129	ar71xx: setup wdt_clock for AR913X to avoid a kernel bug Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27102	2011-06-04 12:30:10 +00:00
Gabor Juhos	ae2cbfa1e8	ar71xx: select the internal antenna by default on the ZCN-1523H boards SVN-Revision: 27101	2011-06-04 12:30:09 +00:00
Felix Fietkau	31dd60689e	Revert "ar71xx: only enable the rx engine after the link is up..." It messes up the DMA state when the link goes down SVN-Revision: 27088	2011-06-01 18:15:43 +00:00
Gabor Juhos	750af1522b	ar71xx: init external_reset for AR933X SVN-Revision: 27083	2011-06-01 13:12:30 +00:00
Gabor Juhos	af4cae4498	ar71xx: add external_reset field to ath9k_platform_data SVN-Revision: 27082	2011-06-01 13:12:28 +00:00
Gabor Juhos	f0c7b93e5d	ar71xx: init get_mac_revision on AR9330 rev 1 SVN-Revision: 27081	2011-06-01 13:12:27 +00:00
Gabor Juhos	1a54e33c17	ar71xx: add get_mac_revision to ath9k_platform_data SVN-Revision: 27080	2011-06-01 13:12:26 +00:00
Gabor Juhos	34ff32a6eb	ar71xx: export SoC revision SVN-Revision: 27079	2011-06-01 13:12:24 +00:00
Felix Fietkau	4f06b8263a	ar71xx: add kernel support for the buffalo wzr-hp-ag300h SVN-Revision: 27075	2011-06-01 02:23:26 +00:00
Gabor Juhos	f332dbd7be	ar71xx: add support for the AP121/AP121-MINI reference boards SVN-Revision: 27067	2011-05-31 22:53:43 +00:00
Gabor Juhos	8beff081eb	ar71xx: register UART for the AR933X SoCs SVN-Revision: 27066	2011-05-31 22:53:42 +00:00
Gabor Juhos	b460bc6f12	ar71xx: add serial driver for the AR933X UART SVN-Revision: 27065	2011-05-31 22:53:40 +00:00
Gabor Juhos	c34e0cbc4c	ar71xx: add WMAC initialization code for the AR933X SoCs SVN-Revision: 27064	2011-05-31 22:53:39 +00:00
Gabor Juhos	e8a0aaf9a2	ar71xx: add ethernet initialization for the AR933X SoCs SVN-Revision: 27063	2011-05-31 22:53:37 +00:00
Gabor Juhos	e0a0f3796a	ar71xx: enable USB support for the AR933x SoCs SVN-Revision: 27062	2011-05-31 22:53:36 +00:00
Gabor Juhos	677c80ee17	ar71xx: add AR933x specific glue for ar71xx_device{start,stop} SVN-Revision: 27061	2011-05-31 22:53:35 +00:00
Gabor Juhos	88c45e3130	ar71xx: the watchdog uses the reference clock on the AR933x SoCs SVN-Revision: 27060	2011-05-31 22:53:34 +00:00
Gabor Juhos	7acbacab8c	ar71xx: add AR933x specific glue code for IRQ initialization SVN-Revision: 27059	2011-05-31 22:53:32 +00:00
Gabor Juhos	e6fde61bec	ar71xx: don't register 8250 UART on the AR933x SoCs SVN-Revision: 27058	2011-05-31 22:53:31 +00:00
Gabor Juhos	8f7541a044	ar71xx: enable GPIO support for the AR933x SoCs SVN-Revision: 27057	2011-05-31 22:53:30 +00:00
Gabor Juhos	e11b9c8371	ar71xx: add AR933x specific frequency initialization code SVN-Revision: 27056	2011-05-31 22:53:29 +00:00
Gabor Juhos	0bf4478d37	ar71xx: add AR933x specific early_printk support SVN-Revision: 27055	2011-05-31 22:53:27 +00:00
Gabor Juhos	6b3ca9ef0b	ar71xx: add preliminary support for the Atheros AR933x SoCs SVN-Revision: 27054	2011-05-31 22:53:26 +00:00
Gabor Juhos	0677e16248	ar71xx: Fix header offset for newer WRT160NL models Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K, resulting in miscalculated partition sizes. Since the actual sizes did not change, hardcode them to their current sizes, and make sure they are at least one erase block big (in case Cisco decides to start to use chips with 128K erase blocks). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27049	2011-05-31 22:53:20 +00:00
Gabor Juhos	be97e2a043	ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols SVN-Revision: 27048	2011-05-31 22:53:19 +00:00
Gabor Juhos	5d5f72415e	ar71xx: initialize is_clk_25mhz field for AR9340 WMAC SVN-Revision: 27045	2011-05-31 22:53:15 +00:00
Gabor Juhos	f7b3c3dfd1	ar71xx: sync ath9k_platform_data.h with compat-wireless SVN-Revision: 27044	2011-05-31 22:53:14 +00:00
Gabor Juhos	60d5abbc27	ar71xx: ag71xx: make ring sizes configurable via ethtool SVN-Revision: 27041	2011-05-31 22:53:10 +00:00
Gabor Juhos	7a2651f633	ar71xx: ag71xx: prepare to make ring sizes configurable SVN-Revision: 27040	2011-05-31 22:53:09 +00:00
Gabor Juhos	669aba3871	ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define Reported-by: Dave Täht <dave.taht@gmail.com> SVN-Revision: 27039	2011-05-31 22:53:07 +00:00
Felix Fietkau	2b5402d128	ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) SVN-Revision: 27035	2011-05-30 23:08:01 +00:00
Felix Fietkau	0ebc93831f	ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames SVN-Revision: 27034	2011-05-30 23:07:57 +00:00
Matteo Croce	17e257925f	ar71xx: don't probe the LAN PHY SVN-Revision: 26924	2011-05-17 11:15:24 +00:00
Matteo Croce	4deecea26b	ar71xx: detect link on LAN ports SVN-Revision: 26922	2011-05-17 11:12:56 +00:00
Matteo Croce	2ea528d1d0	ar71xx: add link detection on Ubiquiti devices WAN port SVN-Revision: 26891	2011-05-14 23:31:50 +00:00
Matteo Croce	c0c2e18452	use correct macros and frame size in ag71xx SVN-Revision: 26890	2011-05-14 23:10:06 +00:00
Matteo Croce	99d1d4f795	ar71xx: cosmetic fixes SVN-Revision: 26889	2011-05-14 23:08:00 +00:00
Gabor Juhos	9b5036a29d	ar71xx: populate LED3 on the JA76PF board Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> SVN-Revision: 26862	2011-05-08 21:38:51 +00:00
Gabor Juhos	869f3cb718	ar71xx: remove superfluous fifo_cfg overrides SVN-Revision: 26859	2011-05-08 21:38:46 +00:00
Gabor Juhos	5d77f370d6	ar71xx: ag71xx: make switch register access atomic Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec SVN-Revision: 26856	2011-05-08 16:32:53 +00:00
Gabor Juhos	3711658281	ar71xx: ag71xx: fix section mismatch warnings The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. SVN-Revision: 26855	2011-05-08 13:30:36 +00:00
Gabor Juhos	ef53029870	ar71xx: ag71xx: fix build error if debugfs is enabled SVN-Revision: 26854	2011-05-08 13:30:26 +00:00
Gabor Juhos	8b67d748cb	ar71xx: ag71xx: add debugfs entry for [rt]x_ring SVN-Revision: 26845	2011-05-07 12:40:34 +00:00
Gabor Juhos	2166432ba0	ar71xx: ag71xx: add timestamps to ag71xx_buf SVN-Revision: 26844	2011-05-07 12:40:28 +00:00
Gabor Juhos	896e1d1ab4	ar71xx: ag71xx: use dynamically allocated buffer for napi_stats SVN-Revision: 26843	2011-05-07 12:40:26 +00:00
Gabor Juhos	a6708d20d1	ar71xx: ag71xx: use debugfs_remove_recursive SVN-Revision: 26842	2011-05-07 12:40:25 +00:00
Gabor Juhos	c39e5b9360	ar71xx: override wmac device name for the AR934x SoCs SVN-Revision: 26840	2011-05-07 09:23:32 +00:00
Felix Fietkau	cbc75a9c70	ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config SVN-Revision: 26779	2011-04-28 21:27:42 +00:00
Felix Fietkau	36aecb08b8	ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) SVN-Revision: 26777	2011-04-28 19:30:49 +00:00
Gabor Juhos	fa9f45f345	ar71xx: fix build error w/o CONFIG_PCI SVN-Revision: 26606	2011-04-12 13:14:56 +00:00
Gabor Juhos	e193547733	ar71xx: use the gpio_keys_polled driver instead of gpio_buttons SVN-Revision: 26603	2011-04-12 09:29:21 +00:00
Gabor Juhos	54ede24829	ar71xx: Add support for WZR-HP-G301NH Add support for the Buffalo WZR-HP-G301NH. The only difference between it and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S. Since we don't do runtime detection of the switch, we need a separate machine definition for it. While we are at it, also rename the profile to reflect that it now is for more than one device. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26601	2011-04-12 09:29:10 +00:00
Gabor Juhos	ef4c1d49a6	ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac SVN-Revision: 26595	2011-04-11 17:37:08 +00:00
Gabor Juhos	4711dea8ff	ar71xx: fix AR934X_WMAC_SIZE SVN-Revision: 26594	2011-04-11 17:37:03 +00:00
Gabor Juhos	8586e61b00	ar71xx: fix section mismatch SVN-Revision: 26562	2011-04-09 18:47:55 +00:00
Gabor Juhos	a8bf5e3cdb	ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq Also initialize that for each SoC and print its value along with the other frequencies. SVN-Revision: 26561	2011-04-09 18:47:52 +00:00
Gabor Juhos	5573d6eb28	ar71xx: show the SoC type earlier SVN-Revision: 26560	2011-04-09 18:47:50 +00:00
Gabor Juhos	ab4c3b3a1c	ar71xx: cleanup SoC detection code SVN-Revision: 26559	2011-04-09 18:47:49 +00:00
Gabor Juhos	3310c70702	ar71xx: Fix mac address offset for AR934x Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> SVN-Revision: 26557	2011-04-09 18:47:42 +00:00
Gabor Juhos	8f889f9250	ar71xx: add DB120 board specific PCI initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26523	2011-04-07 20:53:41 +00:00
Gabor Juhos	a0c3d49064	ar71xx: register WMAC device on the DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26522	2011-04-07 20:53:37 +00:00
Gabor Juhos	428888faec	ar71xx: add support for the built-in WMAC of the AR934x Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26521	2011-04-07 20:53:34 +00:00
Gabor Juhos	14b42c44ec	ar71xx: add initial support for the Atheros DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26518	2011-04-07 20:53:19 +00:00
Gabor Juhos	2b064bb398	ar71xx: add support for the watchdog of the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26516	2011-04-07 20:53:10 +00:00
Gabor Juhos	e4555809c7	ar71xx: enable PCI for the AR934[24] SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26515	2011-04-07 20:53:05 +00:00
Gabor Juhos	4f395745af	ar71xx: enable USB support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26514	2011-04-07 20:53:03 +00:00
Gabor Juhos	25693b4769	ar71xx: enable GPIO support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26513	2011-04-07 20:53:00 +00:00
Gabor Juhos	334a5ec36e	ar71xx: add AR934x specific glue for ar7100_device{start,stop} Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26512	2011-04-07 20:52:57 +00:00
Gabor Juhos	ccd3ebd309	ar71xx: add AR934x specific UART clock initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26511	2011-04-07 20:52:53 +00:00
Gabor Juhos	91470edada	ar71xx: add AR934x specific glue for IRQ initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26510	2011-04-07 20:52:49 +00:00
Gabor Juhos	3b209880bc	ar71xx: add initial support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26509	2011-04-07 20:52:45 +00:00
Felix Fietkau	98c78c13db	ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection SVN-Revision: 26394	2011-04-02 00:47:33 +00:00
Felix Fietkau	41ee4a283c	ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead SVN-Revision: 26393	2011-04-02 00:47:29 +00:00
Felix Fietkau	acbb3e50e7	ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts SVN-Revision: 26392	2011-04-02 00:47:25 +00:00
Gabor Juhos	8eb616de82	ar71xx: add support for the TP-Link TL-WA901ND v2 board Patch-by: Jonathan Benett <jbscience87@gmail.com> SVN-Revision: 26119	2011-03-13 15:08:31 +00:00
Felix Fietkau	5bddd70a37	Revert "ar71xx: add missing gpio_set_debounce function" - wrong target SVN-Revision: 25854	2011-03-03 16:21:23 +00:00
Felix Fietkau	57a14f4e15	ar71xx: add missing gpio_set_debounce function SVN-Revision: 25848	2011-03-03 10:33:35 +00:00
Gabor Juhos	256169cbd0	ar71xx: add rtl8366s initvals for the DIR-825 board SVN-Revision: 25121	2011-01-26 20:35:47 +00:00
Gabor Juhos	67c3e0bf7e	ar71xx: add support for the WNDR3700v2 board Based on a patch by Mark Mentovai <mark@moxienet.com> SVN-Revision: 25118	2011-01-26 20:35:42 +00:00
Jo-Philipp Wich	18ed5bca9b	fix null pointer access in mach-dir-600-a1.c machine setup (#8671 ) SVN-Revision: 25043	2011-01-18 18:04:50 +00:00
Gabor Juhos	b67bbfe287	ar71xx: fix wlan LED on the TL-WR741 board * Patch from #8630 SVN-Revision: 24963	2011-01-11 08:20:47 +00:00
Gabor Juhos	dd53effe15	ar71xx: fix wrong names of the WPS LED/button Reported-by: Nuno Gonçalves SVN-Revision: 24961	2011-01-10 18:15:47 +00:00
Gabor Juhos	23a6173099	ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver SVN-Revision: 24944	2011-01-09 09:29:45 +00:00
Gabor Juhos	0de8689b70	ar71xx: use spinlock in ar71xx_device_{start,stop} SVN-Revision: 24929	2011-01-08 11:28:32 +00:00
Felix Fietkau	6acfae9379	ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC Signed-off-by: Alexander Couzens <lynxis@c-base.org> SVN-Revision: 24723	2010-12-19 11:56:42 +00:00
Gabor Juhos	cafe08a1b2	ar71xx: remove stray semicolons SVN-Revision: 24651	2010-12-17 17:57:20 +00:00
Gabor Juhos	01c76bf128	ar71xx: fix WLAN LEDs on the DIR-825 board SVN-Revision: 24650	2010-12-17 17:10:21 +00:00
Gabor Juhos	c1d3a23d19	ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards SVN-Revision: 24649	2010-12-17 17:10:19 +00:00
Gabor Juhos	8390b7dc9b	ar71xx: UBNT Secondary MAC address duplicate fix There is Secondary MAC address duplicate problem with some UBNT RouterStation and RouterStation Pro HW batches as Primary MAC addresses are not increased by 2 per device in board data. Fix is to use 'Locally Administrated bit' for Secondary MAC address instead of increasing Primary MAC addresses by 1 which could overlap with other device Primary MAC address. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24643	2010-12-17 17:10:01 +00:00
Gabor Juhos	a2a5598c00	ar71xx: add wlan led for the TL-WR941ND SVN-Revision: 24612	2010-12-15 19:55:50 +00:00
Gabor Juhos	e421d2575f	ar71xx: UBNT M-Series MAC address fix UBNT M-Series devices have 2 MAC addresses in board data. Fix is to use both entries from board data instead of one entry. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24611	2010-12-15 19:55:47 +00:00
Gabor Juhos	6c1ace2f28	ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards SVN-Revision: 24569	2010-12-14 18:01:04 +00:00
Gabor Juhos	a7750dae90	ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards SVN-Revision: 24568	2010-12-14 18:01:00 +00:00
Gabor Juhos	9f38f9bf76	ar71xx: add missing files for the JA76PF board SVN-Revision: 24444	2010-12-10 19:55:28 +00:00
Gabor Juhos	b680f088ba	ar71xx: add support for the jjPlus JA79PF Patch-by: Cezary Jackiewicz SVN-Revision: 24440	2010-12-10 17:57:51 +00:00
Gabor Juhos	5b0c83edd9	ar71xx: add support for the TP-LINK TL-MR3220 v1 board SVN-Revision: 24439	2010-12-10 17:57:48 +00:00
Felix Fietkau	8067f3f3cc	ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues SVN-Revision: 24236	2010-12-04 01:32:15 +00:00
Gabor Juhos	9971dfe059	ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage r22700 contained a copy-and-paste error that set eth0's MAC address twice and never set eth1's. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 24036	2010-11-19 07:24:00 +00:00
Gabor Juhos	920a34c0ce	ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23983	2010-11-12 18:52:45 +00:00
Gabor Juhos	3106aea40b	ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23982	2010-11-12 18:52:28 +00:00
Gabor Juhos	30ef7d55fc	ar71xx: use pr_* functions in drivers Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23981	2010-11-12 18:52:12 +00:00
Gabor Juhos	fddf3b8dac	ar71xx: drivers/rb4xx_nand: remove C++ comment usage Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23980	2010-11-12 18:51:55 +00:00
Gabor Juhos	f4d5c885e4	ar71xx: return statements does not need parenthesis Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23979	2010-11-12 18:51:38 +00:00
Gabor Juhos	e244e1c7cd	ar71xx: fix inline attribute location Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23978	2010-11-12 18:51:21 +00:00
Gabor Juhos	acd8ad4de5	ar71xx: wrap long lines (build errors has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23977	2010-11-12 18:51:04 +00:00
Gabor Juhos	eef802855a	ar71xx: fix trailing statements location Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23976	2010-11-12 18:50:47 +00:00
Gabor Juhos	500fac1735	ar71xx: fix whitespaces nits (build error has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23975	2010-11-12 18:50:29 +00:00
Claudio Mignanti	20b2a4417a	Add support for Ubiquiti UniFi AP SVN-Revision: 23904	2010-11-06 21:08:48 +00:00
Felix Fietkau	91b6c63adc	ar71xx: Set eth1 MAC address from EEPROM for WNDR3700 The WNDR3700's art/caldata partition contains three MAC addresses at offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1, respectively. The existing code configures eth1's MAC address by adding 1 to eth0's instead of using the value stored in the EEPROM. This patch causes the stored value to be used directly. (On my WNDR3700s, the three stored addresses are all sequential anyway.) Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 23876	2010-11-04 18:46:07 +00:00
Felix Fietkau	fc28e1cd7d	ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai) SVN-Revision: 23875	2010-11-04 18:39:49 +00:00
Felix Fietkau	b4e2c09b46	ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues SVN-Revision: 23822	2010-11-03 14:55:53 +00:00
Felix Fietkau	f056c054b9	ar71xx: the ar7240 dsa driver is no longer used, remove it. SVN-Revision: 23577	2010-10-21 18:42:28 +00:00
Felix Fietkau	9e2d1a194d	ar71xx: use the new ar7240 switch driver for tl-wa901nd as well SVN-Revision: 23576	2010-10-21 18:42:22 +00:00
Felix Fietkau	6656450c6d	ar71xx: fix more section mismatches SVN-Revision: 23575	2010-10-21 18:42:16 +00:00
Felix Fietkau	8858d90afe	ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32 SVN-Revision: 23574	2010-10-21 18:42:11 +00:00
Jo-Philipp Wich	a680385396	remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel SVN-Revision: 23451	2010-10-14 23:08:10 +00:00
Felix Fietkau	fc035b3cb6	ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver SVN-Revision: 23439	2010-10-14 13:41:42 +00:00
Felix Fietkau	3941621dbc	ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563 ) SVN-Revision: 23432	2010-10-14 00:14:59 +00:00
Felix Fietkau	b61a804bf7	ar71xx: increase rb4xx nand kernel partition size (patch by danimo) SVN-Revision: 23293	2010-10-07 14:27:34 +00:00
Gabor Juhos	697f5d0bdd	ar71xx: initial support for jjPlus JWAP003 Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) SVN-Revision: 23165	2010-10-01 07:09:29 +00:00
Felix Fietkau	8511c6b16c	AP96: Fix LAN/WAN setup LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> SVN-Revision: 23147	2010-09-28 22:55:14 +00:00
Gabor Juhos	32d12d5e5c	ar71xx: add support for the TL-MR3420 v1 board SVN-Revision: 23136	2010-09-27 14:53:59 +00:00
Gabor Juhos	b831ebdde9	ar71xx: AR724[12] requires different USB setup SVN-Revision: 23135	2010-09-27 14:53:57 +00:00
Gabor Juhos	cda8655910	ar71xx: use the MDIO interface of the 2nd MAC on the ar7241 SVN-Revision: 23132	2010-09-27 14:53:49 +00:00
Gabor Juhos	b445943cdf	ar71xx: move ath9k specific PCI fixup into a separate file SVN-Revision: 23131	2010-09-27 14:53:46 +00:00
Gabor Juhos	4ae167959b	ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. SVN-Revision: 23130	2010-09-27 14:53:43 +00:00
Felix Fietkau	a7bb7dd99e	Add support for Atheros AP96 reference board This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> SVN-Revision: 23125	2010-09-27 08:59:53 +00:00
Felix Fietkau	0c6653c6e2	ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND SVN-Revision: 22935	2010-09-05 16:17:06 +00:00
Gabor Juhos	b4336a8e2d	ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards SVN-Revision: 22882	2010-09-03 18:14:37 +00:00
Gabor Juhos	47f8fd1dde	ar71xx: rewrite SPI drivers for the RB4xx boards * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs SVN-Revision: 22863	2010-08-31 20:13:47 +00:00
Gabor Juhos	7bc5a672c1	ar71xx: change mac address initialization SVN-Revision: 22700	2010-08-18 16:00:28 +00:00
Felix Fietkau	523fcf0497	ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 SVN-Revision: 22675	2010-08-16 19:21:57 +00:00
Felix Fietkau	65899cfa49	ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do SVN-Revision: 22401	2010-07-27 21:04:43 +00:00
Felix Fietkau	900aaa919b	ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values) SVN-Revision: 22353	2010-07-22 12:37:44 +00:00
Felix Fietkau	bced5d7d74	ar71xx: set default values for the fifo cfg registers on AR724x SVN-Revision: 22303	2010-07-20 01:54:11 +00:00
Gabor Juhos	4bb11f9a39	generic: move ath5k_platform.h from ar71xx to generic files SVN-Revision: 22189	2010-07-15 07:36:58 +00:00
Gabor Juhos	95e09cccd8	ar71xx: in-flash macs and eeprom for mach-eap7660d This adds in-flash mac-addresses and calibration data for the Senao EAP7660D board. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> SVN-Revision: 22187	2010-07-15 07:36:52 +00:00
Felix Fietkau	a27ea45e76	ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563 SVN-Revision: 22075	2010-07-06 12:40:07 +00:00
Felix Fietkau	15b209d09f	ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably SVN-Revision: 22055	2010-07-04 02:15:08 +00:00
Felix Fietkau	89da22d1ea	ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down fixes boot time crashes under load reported by matteo SVN-Revision: 22054	2010-07-04 01:31:33 +00:00
Gabor Juhos	5a28fb88a4	ar71xx: fix leds-rb750 build failure on 2.6.34 SVN-Revision: 22016	2010-07-01 14:49:06 +00:00
Gabor Juhos	7bff9c0101	ar71xx: add support for the Senao EAP7660D board This patch adds support for the Senao EAP7660D board to trunk. Signed-off-by: Daniel Golle <daniel.golle@gmail.com> SVN-Revision: 21837	2010-06-18 16:22:05 +00:00
Gabor Juhos	08c2e29018	ar71xx: avoid duplicated 'board' parameter in kernel command line SVN-Revision: 21805	2010-06-14 20:02:44 +00:00
Gabor Juhos	9789f0215a	ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype SVN-Revision: 21764	2010-06-12 13:20:39 +00:00
Gabor Juhos	adb0a95df1	ar71xx: fix phy_mask for the RB450 SVN-Revision: 21743	2010-06-09 19:48:35 +00:00
Gabor Juhos	6ce447427c	ar71xx: fix build error in the rb{4xx,750}_nand drivers on 2.6.34/35 SVN-Revision: 21736	2010-06-09 15:31:34 +00:00
Gabor Juhos	d55ebf3a8a	ar71xx: fix phy_mask on the RB433 for the IP17xx driver SVN-Revision: 21728	2010-06-08 20:19:18 +00:00
Gabor Juhos	90e2b1ad6b	ar71xx: fix 2.6.34 build errors SVN-Revision: 21698	2010-06-07 09:18:13 +00:00
Gabor Juhos	115f845e53	ar71xx: fix nbg460n mtd partitions This fixes the NBG460N/550N/550NH mtd partitions. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> SVN-Revision: 21443	2010-05-14 08:37:58 +00:00
Gabor Juhos	fca9b7ebad	ar71xx: remove config partition from the mtd map on the MZK-W300NH board This space can be used to extend the rootfs_data partition. SVN-Revision: 21173	2010-04-26 18:28:04 +00:00
Gabor Juhos	77b2354fcd	ar71xx: fix firmware partition size on the MZK-W04NU board SVN-Revision: 21172	2010-04-26 18:28:01 +00:00
Felix Fietkau	7966004d99	ag71xx: remove rx alignment code for small packets, it seems to break ipv6 for some reason (fixes #7236 ) SVN-Revision: 21166	2010-04-26 16:39:13 +00:00
Felix Fietkau	9848d38aed	ar71xx: fix a wifi card stability issue when we receive a pci/ahb interrupt, we need to flush pending data for dma from the device, otherwise the tx path may get stuck if the completion flag of the dma descriptor is not updated at the time the tx interrupt arrives. SVN-Revision: 21143	2010-04-24 17:24:11 +00:00
Gabor Juhos	10ed3b23a6	ar71xx: reduce button threshold value on the NBG460 board SVN-Revision: 21076	2010-04-21 19:07:23 +00:00
Gabor Juhos	9933d34770	ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons SVN-Revision: 21075	2010-04-21 19:07:19 +00:00
Gabor Juhos	693ea524c1	ar71xx: adding support for zyxel nbg460n/550n/550nh boards This patch adds support for the zyxel nbg460n/550n/550nh routers. Currently this only works if a second stage bootloader is also flashed, as the used switch needs extra initialization. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> SVN-Revision: 20990	2010-04-18 16:24:12 +00:00
Felix Fietkau	1c0e751391	ar71xx: fix up alignment handling - on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers SVN-Revision: 20892	2010-04-15 23:31:17 +00:00
Gabor Juhos	dd7304ec6d	ar71xx: update phy masks for the Planex boards This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org SVN-Revision: 20754	2010-04-09 08:40:14 +00:00
Gabor Juhos	d6c0363884	ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards Cc: backfire@openwrt.org SVN-Revision: 20752	2010-04-09 08:40:09 +00:00
Gabor Juhos	4c29a2c263	ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions Cc: backfire@openwrt.org SVN-Revision: 20751	2010-04-09 08:40:06 +00:00

... 7 8 9 10 11 ...

1291 Commits