openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 01:28:59 +00:00

Author	SHA1	Message	Date
Felix Fietkau	dc9675282e	ar71xx: add a helper function for setting up PHY4 swapping on ar933x SVN-Revision: 32092	2012-06-06 17:24:09 +00:00
Felix Fietkau	02ab0d3ef9	ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install SVN-Revision: 32090	2012-06-06 17:24:01 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Luka Perkov	7f00e5ffc6	uboot-envtools: update to 2012.04.01 SVN-Revision: 32051	2012-06-04 21:55:49 +00:00
Gabor Juhos	cd7ab1d30b	ar71xx: add default LED setup for the DB120 board SVN-Revision: 31997	2012-05-29 16:39:23 +00:00
Gabor Juhos	4e40bdc190	ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992	2012-05-29 16:39:17 +00:00
Felix Fietkau	a9cd8446f3	ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality SVN-Revision: 31956	2012-05-28 20:39:50 +00:00
Felix Fietkau	367e4b3994	ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack SVN-Revision: 31934	2012-05-28 02:55:59 +00:00
Felix Fietkau	8039a1bbb2	ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x SVN-Revision: 31925	2012-05-27 21:02:41 +00:00
Gabor Juhos	8865f0923e	ar71xx: fix TL-WR1041 image size SVN-Revision: 31923	2012-05-27 17:21:47 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	c57409e79d	ar71xx: fix an insignificant typo Patch from #11485. SVN-Revision: 31847	2012-05-23 21:05:30 +00:00
Gabor Juhos	013f434f5b	ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD Patch by Kamil Trzciński <ayufan@osk-net.pl> SVN-Revision: 31846	2012-05-23 21:05:25 +00:00
Gabor Juhos	758f670376	ar71xx: add support for TP-Link TL-MR3040 Support for TP-Link TL-MR3040. Power LED not working - always on red, after start should be green. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 31845	2012-05-23 21:05:24 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Felix Fietkau	a3f2fd187b	ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) SVN-Revision: 31736	2012-05-15 10:36:39 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Gabor Juhos	93c9980b94	ar71xx: fix build error if PCI is disabled SVN-Revision: 31646	2012-05-07 21:16:22 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Felix Fietkau	0ff3c396d3	kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes SVN-Revision: 31637	2012-05-06 21:19:14 +00:00
Gabor Juhos	9486904079	ar71xx: add profile and build image for the TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31610	2012-05-05 17:02:41 +00:00
Gabor Juhos	ab897ab04e	ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608	2012-05-05 17:02:35 +00:00
Gabor Juhos	56f2e08537	ar71xx: update 3.3 patches SVN-Revision: 31602	2012-05-05 13:56:35 +00:00
Gabor Juhos	8fffc6d6df	ar71xx: fix a typo in the db120 mach file Reported-by: Sven Eckelmann <sven@narfation.org> SVN-Revision: 31601	2012-05-05 13:56:30 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Gabor Juhos	3e3a4d3d6b	ar71xx: allow to disable link polling on unused PHYs SVN-Revision: 31533	2012-04-29 18:29:24 +00:00
Gabor Juhos	a447f1810c	ar71xx: enable MIB counters in the built-in switch of the AR934x SVN-Revision: 31476	2012-04-25 13:02:11 +00:00
Gabor Juhos	59b0c1b2b9	ar71xx: TL-WR741NDv4: add WLAN LED config On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 31461	2012-04-24 11:38:44 +00:00
Jonas Gorski	8fd383ae2e	kernel: update linux 3.3 to 3.3.3 SVN-Revision: 31460	2012-04-24 09:25:38 +00:00
Gabor Juhos	9140d4ee44	ar71xx: remove duplicated AP121 Kconfig entry SVN-Revision: 31382	2012-04-20 16:50:16 +00:00
Gabor Juhos	da2cc2c79a	ar71xx: nuke 3.2 support SVN-Revision: 31360	2012-04-19 21:32:05 +00:00
Gabor Juhos	9854d6fb7f	ar71xx: switch to 3.3.2 SVN-Revision: 31359	2012-04-19 21:31:58 +00:00
Gabor Juhos	a6b4b5fd6e	ar71xx: sync 3.3 config SVN-Revision: 31358	2012-04-19 21:31:53 +00:00
Gabor Juhos	ef97415b92	ar71xx: merge/reorganize 3.3 patches SVN-Revision: 31357	2012-04-19 21:31:50 +00:00
Gabor Juhos	408de85883	ar71xx: use ap91_pci_init for RB751{,G} SVN-Revision: 31356	2012-04-19 21:31:48 +00:00
Gabor Juhos	0a9832b50d	ar71xx: move USB device registration directly into rb751{,g}_setup SVN-Revision: 31355	2012-04-19 21:31:43 +00:00
Gabor Juhos	78967e6640	ar71xx: add ap9x_pci_get_wmac_data helper SVN-Revision: 31354	2012-04-19 21:31:42 +00:00
Gabor Juhos	5c9ca38e47	ar71xx: add sanity checks to decode_rle Also use -EINVAL instead of -1. SVN-Revision: 31353	2012-04-19 21:31:40 +00:00
Jonas Gorski	a8f2bc682e	kernel: also update the targets to use 3.2.15 Thanks Gabor for spotting it. SVN-Revision: 31337	2012-04-17 13:12:14 +00:00
Jonas Gorski	3a9b6dc313	kernel: update linux 3.3 to 3.3.2 SVN-Revision: 31336	2012-04-17 12:51:02 +00:00
Jonas Gorski	16b4cbcdd6	kernel: update linux 3.2 to 3.2.14 SVN-Revision: 31222	2012-04-09 14:48:51 +00:00
Gabor Juhos	f14fd53e3c	ar71xx: image: build initramfs images for the WHR boards SVN-Revision: 31209	2012-04-06 06:45:08 +00:00
Gabor Juhos	e295a077ce	ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD Great collaboration on these two fantastic routers on the openwrt forum: https://forum.openwrt.org/viewtopic.php?id=32320 Above all kudos to aryufan. Well done and thank you everyone else who contributed. To-Do: LED for wlan is not yet activated To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by the router Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com> [juhosg: fix line wrapped patch, fix checkpatch errors, add missing kernel patches] SVN-Revision: 31208	2012-04-06 06:45:07 +00:00
Gabor Juhos	fe6d66afe2	ar71xx: add rb750 to diag.sh Support status led in diag.sh for RB750 Patch from: Evangelos Arkalis <arkalis.e@gmail.com> SVN-Revision: 31207	2012-04-06 06:45:04 +00:00
Jonas Gorski	d87efd8c3c	kernel: update linux 3.2 to 3.2.13 and refresh patches Also remove a duplicate patch from lantiq (already in generic). SVN-Revision: 31158	2012-04-01 07:56:55 +00:00
Gabor Juhos	b77217d963	ar71xx: boost SPI flash read performance mtd_speedtest results: page read speed old new delta DB120 929 KiB/s 2597 KiB/s +179.55% TL-WR1043ND v1 754 KiB/s 2166 KiB/s +187.27% TL-WR703N v1 745 KiB/s 2176 KiB/s +192.08% TL-MR3220 v1 752 KiB/s 2154 KiB/s +186.44% TL-WR2543ND v1 564 KiB/s 2130 KiB/s +277.66% TL-WR741ND v2 525 KiB/s 1767 KiB/s +236.57% ALFA-AP96 702 KiB/s 1977 KiB/s +181.62% WNDR3700 697 KiB/s 1965 KiB/s +181.92% SVN-Revision: 31118	2012-03-27 19:38:17 +00:00
Gabor Juhos	102c6df148	ar71xx: improve SPI flash read/write performance mtd_speedtest results: page write speed old new delta DB120 209 KiB/s 226 KiB/s +8.13% TL-WR1043ND v1 122 KiB/s 148 KiB/s +21.31% TL-WR703N v1 153 KiB/s 194 KiB/s +26.80% TL-MR3220 v1 130 KiB/s 156 KiB/s +20.00% TL-WR2543ND v1 158 KiB/s 202 KiB/s +27.85% TL-WR741ND v2 122 KiB/s 152 KiB/s +24.59% ALFA AP96 229 KiB/s 260 KiB/s +13.54% WNDR3700 202 KiB/s 223 KiB/s +10.40% page read speed old new delta DB120 691 KiB/s 929 KiB/s +34.44% TL-WR1043ND v1 372 KiB/s 754 KiB/s +102.69% TL-WR703N v1 375 KiB/s 745 KiB/s +98.67% TL-MR3220 v1 372 KiB/s 752 KiB/s +102.15% TL-WR2543ND v1 307 KiB/s 564 KiB/s +83.71% TL-WR741ND v2 315 KiB/s 525 KiB/s +66.67% ALFA AP96 515 KiB/s 702 KiB/s +36.31% WNDR3700 515 KiB/s 697 KiB/s +35.34% SVN-Revision: 31117	2012-03-27 19:38:15 +00:00
Gabor Juhos	6455178a6a	ar71xx: image: build initramfs images for more boards SVN-Revision: 31116	2012-03-27 19:38:13 +00:00
Gabor Juhos	e2bd975a2a	ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers SVN-Revision: 31115	2012-03-27 19:38:11 +00:00
Gabor Juhos	c7966a12b5	ar71xx: image: pass mtdlayout variables by value SVN-Revision: 31114	2012-03-27 19:38:10 +00:00
Gabor Juhos	692e47f49f	ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs SVN-Revision: 31113	2012-03-27 19:38:08 +00:00
Gabor Juhos	6cd5fb7001	ar71xx: remove the built-in MTD map of the AP96 board Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31112	2012-03-27 19:38:07 +00:00
Gabor Juhos	61ee283899	ar71xx: remove the built-in MTD map of the PB92 board Pass the mtd_layout via the kernel command line instead SVN-Revision: 31111	2012-03-27 19:38:05 +00:00
Gabor Juhos	1094dc1996	ar71xx: remove the built-in MTD map of the Zcomax devices Pass the mtd_layout via the kernel command line instead. SVN-Revision: 31110	2012-03-27 19:38:04 +00:00
Gabor Juhos	24554ef187	ar71xx: reclaim the 'user_property' partition on WHR-* boards SVN-Revision: 31109	2012-03-27 19:38:02 +00:00
Gabor Juhos	87e4ec687b	ar71xx: remove the built-in MTD maps of several boards We are passing the MTD layout via the kernel command line, so it makes no sense to duplicate it in mach-* files. The patch removes the built-in MTD maps of the following boards: * AP113 * ALFA N2/N5 * DIR-600 * DIR-615 * DIR-825 * TEW-6{3,5}2BRP * TEW-673GRU * WHR-G301N * WHR-HP-GN * WHR-HP-G300N SVN-Revision: 31108	2012-03-27 19:38:01 +00:00
Gabor Juhos	e6b685650b	ar71xx: use modules for LED triggers SVN-Revision: 31107	2012-03-27 19:37:59 +00:00
Gabor Juhos	e28cd648b7	ar71xx: disable CONFIG_{I2C,SPI}_GPIO SVN-Revision: 31104	2012-03-27 19:37:53 +00:00
Gabor Juhos	6627f45a87	ar71xx: sync 3.3 config SVN-Revision: 31103	2012-03-27 19:37:52 +00:00
Gabor Juhos	f4d1e3d147	ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 SVN-Revision: 31102	2012-03-27 19:37:51 +00:00
Gabor Juhos	ff5b7ef713	linux: refresh patches against 3.3 SVN-Revision: 31047	2012-03-20 15:55:07 +00:00
Gabor Juhos	c8bf90d414	ar71xx: fix IRQ number for the AR7240 OHCI controller SVN-Revision: 31044	2012-03-20 15:02:48 +00:00
Gabor Juhos	c1dc6df8bd	kernel: update linux 3.2 to 3.2.12 SVN-Revision: 31028	2012-03-19 18:23:31 +00:00
Gabor Juhos	f86e412389	ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027	2012-03-19 15:57:07 +00:00
Gabor Juhos	b50cfe077c	ar71xx: sync kernel configs SVN-Revision: 31026	2012-03-19 15:57:06 +00:00
Gabor Juhos	8a2e4b49de	ar71xx: add initial support for RB750GL SVN-Revision: 31025	2012-03-19 15:57:04 +00:00
Gabor Juhos	d19f3dd512	ar71xx: make rb750_latch_change 'static void' SVN-Revision: 31024	2012-03-19 15:57:03 +00:00
Gabor Juhos	5348f46c80	ar71xx: add latch_change field to rb750_led_platform_data SVN-Revision: 31023	2012-03-19 15:57:01 +00:00
Gabor Juhos	8a471efe01	ar71xx: add platform data for the RB750 NAND driver SVN-Revision: 31022	2012-03-19 15:56:59 +00:00
Gabor Juhos	e89df99083	ar71xx: use a different pll value on DB120 SVN-Revision: 31018	2012-03-19 11:11:22 +00:00
Gabor Juhos	e9b45ebaba	ar71xx: add AR934x specific interface speed setup for ge0 SVN-Revision: 31017	2012-03-19 11:11:20 +00:00
Gabor Juhos	6028889727	ar71xx: remove static MTD maps from AP121/DB120 boards SVN-Revision: 31016	2012-03-19 11:11:19 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Gabor Juhos	6ac12fbb3c	ar71xx: use AR8327 on the DB120 board SVN-Revision: 31012	2012-03-18 22:06:58 +00:00
Gabor Juhos	f601339e79	ar71xx: add profile and generate image for the JA76PF2 board SVN-Revision: 30958	2012-03-16 18:00:40 +00:00
Gabor Juhos	6036151187	ar71xx: add support for the jjPlus JA76PF2 board SVN-Revision: 30957	2012-03-16 18:00:34 +00:00
Gabor Juhos	a680662391	ar71xx: change LED name prefix on the jjplus boards SVN-Revision: 30956	2012-03-16 18:00:26 +00:00
Gabor Juhos	c00b53f3d0	ar71xx: move micrel PHY driver to the generic linux target SVN-Revision: 30946	2012-03-15 09:25:53 +00:00
Gabor Juhos	ff909edf94	ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports SVN-Revision: 30926	2012-03-13 17:29:38 +00:00
Gabor Juhos	cd6a4cde13	ar71xx: ag71xx: start aneg on switch PHYs after reset SVN-Revision: 30925	2012-03-13 17:29:37 +00:00
Gabor Juhos	7c9534cfd7	ar71xx: ag71xx: poll PHY status of all available switch ports SVN-Revision: 30924	2012-03-13 17:29:36 +00:00
Gabor Juhos	8449eecf5f	ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch SVN-Revision: 30923	2012-03-13 17:29:34 +00:00
Gabor Juhos	1c5ac02a29	ar71xx: reset the switch on AR934x before ethernet device registration SVN-Revision: 30922	2012-03-13 17:29:33 +00:00
Gabor Juhos	17d3131d3c	ar71xx: fix a typo in ar71xx_regs.h SVN-Revision: 30921	2012-03-13 17:29:31 +00:00
Gabor Juhos	66df117d1b	ar71xx: use a dummy callback for interfaces with fixed speed SVN-Revision: 30913	2012-03-12 20:38:58 +00:00
Gabor Juhos	8b2b37ae58	ar71xx: merge ar934x_bo_ddr_flush patch SVN-Revision: 30912	2012-03-12 20:38:57 +00:00
Gabor Juhos	b0bb0793b9	ar71xx: enable UART function for early_printk/console SVN-Revision: 30909	2012-03-12 17:32:39 +00:00
Gabor Juhos	ccc939ebc0	ar71xx: remove a 3.3 patch, it is already in 3.3-rc7 SVN-Revision: 30903	2012-03-12 16:27:57 +00:00
Gabor Juhos	0814e61841	ar71xx: fix Compex WPE72 detection SVN-Revision: 30902	2012-03-12 16:27:56 +00:00
Gabor Juhos	088dd4e879	ar71xx: stop image building if a loader is missing SVN-Revision: 30877	2012-03-11 14:03:28 +00:00
Gabor Juhos	31584880bf	ar71xx: add watchdog driver to the default package list SVN-Revision: 30852	2012-03-08 09:00:17 +00:00
Gabor Juhos	2d89fa7f43	ar71xx: fix WPS button polarity on TL-WR2543N SVN-Revision: 30849	2012-03-07 19:50:53 +00:00
Gabor Juhos	c455a0f7be	ar71xx: ag71xx: fix get_port_link callback SVN-Revision: 30841	2012-03-07 16:32:35 +00:00
Gabor Juhos	5a83b3a5c7	ar71xx: ag71xx: use the generic get_port_link implementation SVN-Revision: 30840	2012-03-07 16:32:34 +00:00
Gabor Juhos	86d852927e	ar71xx: refresh patches against 3.3-rc5 SVN-Revision: 30801	2012-03-03 14:10:29 +00:00
Gabor Juhos	7052847972	ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled SVN-Revision: 30768	2012-03-01 19:49:05 +00:00
Gabor Juhos	9698a499b6	kernel: update linux 3.2 to 3.2.9 SVN-Revision: 30767	2012-03-01 19:49:02 +00:00
Gabor Juhos	6b37484883	ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038 ) SVN-Revision: 30712	2012-02-24 20:41:38 +00:00
Felix Fietkau	c918810414	ar71xx: switch to kmod-gpio-button-hotplug SVN-Revision: 30660	2012-02-20 10:51:48 +00:00
Gabor Juhos	3d20de331d	ar71xx: fix image signature for UBNT-XM boards SVN-Revision: 30626	2012-02-18 14:45:52 +00:00
Gabor Juhos	3004f30f01	ar71xx: remove duplicated define from the D-Link profile SVN-Revision: 30577	2012-02-16 09:03:27 +00:00
Daniel Dickinson	1bb8a7613e	Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default SVN-Revision: 30571	2012-02-16 07:45:28 +00:00
Daniel Dickinson	b797f72319	d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 SVN-Revision: 30570	2012-02-16 07:38:33 +00:00
Daniel Dickinson	c736e2d4b0	Fix partitions for Cameo-based boards; kernel 3.2 is bigger SVN-Revision: 30569	2012-02-16 07:29:26 +00:00
Daniel Dickinson	4685a51301	image: For Cameo-based board fix adding mtd layout to kernel commandline) SVN-Revision: 30568	2012-02-16 07:24:45 +00:00
Gabor Juhos	9a0e17857e	ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards SVN-Revision: 30508	2012-02-13 17:11:58 +00:00
Gabor Juhos	1c57a22aae	ar71xx: add model detection for TL-WR842N/ND SVN-Revision: 30507	2012-02-13 17:11:57 +00:00
Gabor Juhos	3708227f96	ar71xx: zero partition parser data in m25p80 Ths fixes parsing of RedBoot partitions. SVN-Revision: 30427	2012-02-10 20:19:06 +00:00
Gabor Juhos	6c07149c2d	ar71xx: fix platform description SVN-Revision: 30419	2012-02-10 15:27:49 +00:00
Gabor Juhos	766999085a	ar71xx: ag71xx: add BQL support It will be usable only from linux-3.3. Based on a patch by Dave Taht <dave.taht@bufferbloat.net> SVN-Revision: 30417	2012-02-10 14:56:47 +00:00
Gabor Juhos	fc069f030b	ar71xx: add dummy DQL helper functions for 3.2 SVN-Revision: 30416	2012-02-10 14:56:44 +00:00
Gabor Juhos	32a18a05f8	ar71xx: add preliminary support for 3.3 SVN-Revision: 30410	2012-02-10 11:53:56 +00:00
Felix Fietkau	512df38f5c	ar71xx: disable DDR flush for ethernet on AR934x, it is no longer necessary SVN-Revision: 30409	2012-02-10 11:46:37 +00:00
Felix Fietkau	61f48beadd	ar71xx: fix db120 board detection SVN-Revision: 30408	2012-02-10 11:46:31 +00:00
Gabor Juhos	73b9a8bf9b	ar71xx: allow to build ag71xx w/o PCI support enabled SVN-Revision: 30407	2012-02-10 11:46:10 +00:00
Gabor Juhos	fe0c7aac66	ar71xx: merge 3.2 fixes SVN-Revision: 30406	2012-02-10 08:19:33 +00:00
Gabor Juhos	d72bde99cd	ar71xx: merge files-3.2 to files SVN-Revision: 30405	2012-02-10 08:19:31 +00:00
Gabor Juhos	81b7aaefbe	ar71xx: nuke 2.6.39 support SVN-Revision: 30404	2012-02-10 08:19:28 +00:00
Gabor Juhos	650d777f3d	ar71xx: switch to 3.2.5 SVN-Revision: 30403	2012-02-10 08:19:27 +00:00
Gabor Juhos	abeab97efc	ar71xx: refresh 3.2 patches SVN-Revision: 30402	2012-02-10 08:19:25 +00:00
Gabor Juhos	f754063159	ar71xx: 3.2: remove stray semicolons from the PCI fixup patch SVN-Revision: 30400	2012-02-09 21:19:57 +00:00
Felix Fietkau	848dedeb8b	ar71xx: fix ar934x usb reset handling on 3.2 SVN-Revision: 30399	2012-02-09 20:39:41 +00:00
Gabor Juhos	09c45f50d4	ar71xx: 3.2: get rid of an unused variable in ath79_spi.c SVN-Revision: 30391	2012-02-08 20:47:58 +00:00
Gabor Juhos	c126bed503	ar71xx: 3.2: fix AHB clock name in rb4xx_spi SVN-Revision: 30390	2012-02-08 20:47:56 +00:00
Gabor Juhos	81f15f5026	ar71xx: add profile and build image for the TEW-673GRU board SVN-Revision: 30377	2012-02-08 16:26:27 +00:00
Gabor Juhos	48e85cd47b	ar71xx: add support for the TRENDNet TEW-673GRU board SVN-Revision: 30376	2012-02-08 16:26:25 +00:00
Felix Fietkau	d9ff9c44ee	ar71xx: add usb on the pb92 board SVN-Revision: 30007	2012-02-03 09:44:51 +00:00
Gabor Juhos	41bd6bd282	ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards SVN-Revision: 29978	2012-01-31 20:49:34 +00:00
Gabor Juhos	c315ce403b	ar71xx: merge DIR-600 A1 and DIR-615 E4 support SVN-Revision: 29976	2012-01-31 18:37:29 +00:00
Gabor Juhos	dd47afc197	ar71xx: fix ethernet LEDs on the DIR-600-A1 board SVN-Revision: 29975	2012-01-31 18:37:24 +00:00
Gabor Juhos	8200f0c61a	ar71xx: unify LED names on D-Link boards SVN-Revision: 29974	2012-01-31 18:37:15 +00:00
Gabor Juhos	faeca86e50	ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973	2012-01-31 18:37:09 +00:00
Gabor Juhos	97e4ddd012	ar71xx: add support for TP-Link TL-MR11U Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972	2012-01-31 18:37:01 +00:00
Gabor Juhos	8766f32b8c	ar71xx: compress kernel binaries in Image/Prepare stage The lzma compressed kernel is used by one of the loaders. SVN-Revision: 29971	2012-01-31 18:36:54 +00:00
Gabor Juhos	d5d37febb4	ar71xx: use dynamically allocated partitions in wrt160nl_part SVN-Revision: 29970	2012-01-31 18:36:51 +00:00
Florian Fainelli	eeb00634a7	add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935	2012-01-28 13:19:49 +00:00
Florian Fainelli	405a0f3905	refresh 3.2 patches SVN-Revision: 29934	2012-01-28 13:19:43 +00:00
Gabor Juhos	b9b768b8d3	ar71xx: use 64k block size for WZR-HP-AG300H SVN-Revision: 29917	2012-01-27 10:42:41 +00:00
Gabor Juhos	ac8116739a	ar71xx: fix sysupgrade image building of atheros boards after r29899 SVN-Revision: 29916	2012-01-27 07:51:09 +00:00
Gabor Juhos	013fe76b36	ar71xx: create the temporary directory before building initramfs images Thanks to Florian for reporting. SVN-Revision: 29915	2012-01-26 21:28:34 +00:00
Gabor Juhos	a5538a18d4	ar71xx: create a profile and build images for Compex WPE72 [juhosg: remove ath9k from the the profile package list, build WPE72 image with the Default profile as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29914	2012-01-26 17:01:44 +00:00
Gabor Juhos	e1e84badaa	ar71xx: add support for Compex WPE72/WPE72NX This patch adds support for Compex WPE72 bare board and Compex WPE72NX Indoor Access Point. [juhosg: add support to 3.2 as well] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 29912	2012-01-26 17:01:41 +00:00
Gabor Juhos	038d4e0d77	ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour This patch fixes the board detection of the TL-MR3020. The LED behaviour has also been modified: * The WPS LED is the diag LED now. * A netdev trigger for the LAN LED has been added. The profile of the TL-MR3020 has been updated because the needed package "kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev trigger for the 3G/USB LED. [juhosg: the board name changes has been removed, and the kernel files has been changed instead.] Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29905	2012-01-25 07:44:45 +00:00
Gabor Juhos	c11ac55b29	ar71xx: TL-MR3020: fix GPIO polarity for button and switch This patch fixes the GPIO polarity for the button and the sliding switch. The buttons are not active low. "Pressed" and "Released" events are wrong without the patch. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29904	2012-01-25 07:44:43 +00:00
Gabor Juhos	4f3d6c9ae9	ar71xx: use the lzma loader on the Planex boards SVN-Revision: 29900	2012-01-24 20:12:10 +00:00
Gabor Juhos	5fa9768cee	ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage SVN-Revision: 29899	2012-01-24 20:12:08 +00:00
Gabor Juhos	095c236694	ar71xx: fix the AP/Router LED definitons on MZK-W300NH SVN-Revision: 29897	2012-01-24 18:40:38 +00:00
Gabor Juhos	23e1b451dc	ar71xx: preset WLAN LED config on MZK-W300NH SVN-Revision: 29896	2012-01-24 18:40:36 +00:00
Gabor Juhos	23836d5908	ar71xx: remove hardcoded MTD layout from planex files SVN-Revision: 29895	2012-01-24 18:40:34 +00:00
Gabor Juhos	859c915077	ar71xx: pass mtdlayout to Planex boards via command line SVN-Revision: 29894	2012-01-24 18:40:33 +00:00
Gabor Juhos	6ad9bf8d17	ar71xx: remove an unused header file SVN-Revision: 29893	2012-01-24 18:40:31 +00:00
Gabor Juhos	17bb003891	ar71xx: nuke fs_all variable in image/Makefile SVN-Revision: 29880	2012-01-24 09:47:25 +00:00
Gabor Juhos	1fb88e2541	ar71xx: create interim kernel files in a separate dir This reduces the size of the ImageBuilder tarball a lot. SVN-Revision: 29879	2012-01-24 09:47:23 +00:00
Gabor Juhos	a43e2f508f	ar71xx: prebuild all loaders in Image/Prepare stage SVN-Revision: 29878	2012-01-24 09:47:22 +00:00
Gabor Juhos	44517a3789	ar71xx: 3.2: fix build errors if PCI is not enabled SVN-Revision: 29870	2012-01-23 08:52:21 +00:00
Gabor Juhos	778db0a13d	ar71xx: fix compiler warning if PCI is not enabled SVN-Revision: 29869	2012-01-23 08:52:18 +00:00
Gabor Juhos	af015f956c	ar71xx: add initial support for 3.2 Tested on the following boards: ALFA AP96 TL-MR3220 v1 TL-WR1043ND v1 TL-WR2543ND v1 TL-WR703N v1 TL-WR741ND v1 TL-WR741ND v4 WNDR3700 v1 WZR-HP-G300NH SVN-Revision: 29868	2012-01-22 22:38:19 +00:00
Gabor Juhos	386cbfe45b	ar71xx: move arch specific files to files-2.6.39 SVN-Revision: 29867	2012-01-22 22:38:11 +00:00
Gabor Juhos	7b7427e52c	ar71xx: build ALFA AP96 images with default profile as well SVN-Revision: 29866	2012-01-22 22:33:15 +00:00
Gabor Juhos	e7dee3aeed	ar71xx: wrt160nl_part: include module.h and fix compiler warnings SVN-Revision: 29856	2012-01-22 17:55:38 +00:00
Gabor Juhos	a7d344565b	ar71xx: tplinkpart: include module.h SVN-Revision: 29855	2012-01-22 17:55:36 +00:00
Gabor Juhos	6c2638c5e2	ar71xx: rename vsc7385 spi driver SVN-Revision: 29853	2012-01-22 13:51:57 +00:00
Gabor Juhos	bb16739db9	ar71xx: rename ap81 spi driver SVN-Revision: 29852	2012-01-22 13:51:56 +00:00
Gabor Juhos	5ef8b922fa	ar71xx: rename rb4xx spi drivers SVN-Revision: 29851	2012-01-22 13:51:54 +00:00
Gabor Juhos	aad175d5b6	ar71xx: rename the nxp_74hc153 driver SVN-Revision: 29850	2012-01-22 13:51:52 +00:00
Gabor Juhos	ef1c53b7b7	ar71xx: change board id of the UniFi board SVN-Revision: 29849	2012-01-22 13:51:50 +00:00
Gabor Juhos	f90e578903	ar71xx: include linux/module.h in the micrel phy driver SVN-Revision: 29848	2012-01-22 13:51:49 +00:00
Gabor Juhos	fbf81c8e79	ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c SVN-Revision: 29713	2012-01-11 18:00:50 +00:00
Gabor Juhos	67f62cf5cf	ar71xx: disable ath79 in order to get rid of Kconfig warnings SVN-Revision: 29711	2012-01-11 09:14:19 +00:00
Gabor Juhos	88d8cdd503	ar71xx: pb44_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29710	2012-01-11 09:14:18 +00:00
Gabor Juhos	e1b7995aef	ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove SVN-Revision: 29709	2012-01-11 09:14:17 +00:00
Gabor Juhos	67444c7795	ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers SVN-Revision: 29708	2012-01-11 09:14:15 +00:00
Gabor Juhos	0f566a376c	ar71xx: ar71xx_spi: add shutdown handler This allows to access the flash from a kexec'd kernel. SVN-Revision: 29707	2012-01-11 09:14:14 +00:00
Gabor Juhos	09a6e3f662	ar71xx: ar71xx_spi: save and restore regs from probe/remove SVN-Revision: 29706	2012-01-11 09:14:13 +00:00
Gabor Juhos	714a9bd641	ar71xx: ar71xx_wdt: add shutdown handler SVN-Revision: 29705	2012-01-11 09:14:11 +00:00
Gabor Juhos	9727256330	ar71xx: refresh patches SVN-Revision: 29683	2012-01-07 19:36:43 +00:00
Gabor Juhos	4edff7d3ef	ar71xx: add a profile and build images for the TL-WR2543N/ND SVN-Revision: 29682	2012-01-07 19:36:42 +00:00
Gabor Juhos	a1dcbc66a6	ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680	2012-01-07 19:36:35 +00:00
Gabor Juhos	a56bdeff9d	ar71xx: allow to specify max read size for m25p80 Reading from the flash chip on the TL-WR2543ND seems buggy. If the SPI flash driver tries to read too much data in one SPI transfer, the flash chip returns bogus values. This can be caused by a buggy flash chip on my board, or it can be a bug in our SPI driver. Add a workaround to the m25p80 driver until I find out the root cause of the problem. The patch allows to specify the maximum numner of bytes which can be read safely withint one SPI transfer. SVN-Revision: 29679	2012-01-07 19:36:33 +00:00
Gabor Juhos	67b2814842	ar71xx: local mac support on the wndr3700 The wndr3700 at least has no eth0 mac address and usually leverages the first wireless device's mac when in a bridged scenario. If, however, you want to route, and not bridge the interfaces, you need a unique mac address for it. This patch sets the local bit on the mac address pulled from the wireless chip and uses the resulting address for eth0. Patch-by: Dave Taht <dave.taht@gmail.com> SVN-Revision: 29675	2012-01-07 17:24:44 +00:00
Gabor Juhos	6c74274c8d	generic: improve MIPS kexec support It is based on patches from the linux-longsoon-community git tree: http://dev.lemote.com/cgit/linux-loongson-community.git/ Now the kernel can use the command line parameter from kexec-tools. Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped before executing the new kernel). Compile tested with lantiq (3.1.4) and brcm47xx (3.0.12). SVN-Revision: 29674	2012-01-07 16:29:16 +00:00
Gabor Juhos	f638c6207b	ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards SVN-Revision: 29672	2012-01-06 15:54:59 +00:00
Gabor Juhos	1e848b17ad	ar71xx: add support for Redwave RW2458N Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29669	2012-01-06 07:20:59 +00:00
Gabor Juhos	84cd8a5ee0	ar71xx: fix RB-750 network configuration SVN-Revision: 29668	2012-01-06 07:20:54 +00:00
Gabor Juhos	8eb0b7ab3d	ar71xx: fix sections mismatch warnings in the nand drivers SVN-Revision: 29667	2012-01-05 18:08:33 +00:00
Gabor Juhos	232eb83f74	ar71xx: fix LED configuration on the RB-750 SVN-Revision: 29666	2012-01-05 18:08:28 +00:00
Gabor Juhos	d65c6fe720	ar71xx: create profile and build image for the ALFA AP96 board SVN-Revision: 29663	2012-01-04 21:13:57 +00:00
Gabor Juhos	b8f0d86115	ar71xx: add inital support for the ALFA Network AP96 board The microSD slot and the Real Time Clock is not working yet. The miniPCIe interface is not tested due to the lack of a suitable card. SVN-Revision: 29662	2012-01-04 21:13:54 +00:00
Gabor Juhos	807e046193	ar71xx: specify console kernel parameter for the Compex boards SVN-Revision: 29660	2012-01-04 17:30:59 +00:00
Gabor Juhos	923f3e3752	ar71xx: allow to use the command line hack on compex devices SVN-Revision: 29659	2012-01-04 17:30:58 +00:00
Gabor Juhos	2f53f82203	ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 These models are based on the AP99 reference board, and uses the AR7241 SoC. SVN-Revision: 29658	2012-01-04 17:30:57 +00:00
Gabor Juhos	301b1b4f92	ar71xx: show correct model name on TL-WA701N/ND boards SVN-Revision: 29657	2012-01-04 17:30:55 +00:00
Gabor Juhos	ac68f0d8fa	ar71xx: add profile and build image for the TL-WA701N/ND boards SVN-Revision: 29656	2012-01-04 17:30:54 +00:00
Gabor Juhos	72019009c7	ar71xx: fix network configuration for the TL-WA901N/ND boards SVN-Revision: 29654	2012-01-04 17:30:52 +00:00
Gabor Juhos	90bfef9ec9	ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653	2012-01-04 17:30:50 +00:00
Gabor Juhos	5eb502d9c1	ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652	2012-01-04 17:30:49 +00:00
Gabor Juhos	1045c83527	ar71xx: add support for TP-Link TL-MR3020 This patch adds support for the TP-Link device TL-MR3020 which is very similiar to the TL-WR703N. The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions. Only four LEDs can be controlled via GPIO. The power LED is connected to the power supply. The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals of the sliding switch have been mapped to BTN_0 and BTN_1. I have also setup a wiki page with details here: http://wiki.openwrt.org/toh/tp-link/tl-mr3020 USB is working and has been tested with USB mass storage and USB UMTS stick. Wifi also seems to work. Ethernet is working too. Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> SVN-Revision: 29651	2012-01-04 17:30:47 +00:00
Gabor Juhos	88223f87d1	ar71xx: use the new om-watchdog package for OM2P Signed-off-by: Antonio Quartulli <ordex@autistici.org> SVN-Revision: 29648	2012-01-04 17:30:41 +00:00
Gabor Juhos	8854c90119	ar71xx: add profile and build factory image for the Hornet-UB board SVN-Revision: 29637	2012-01-01 19:30:29 +00:00
Gabor Juhos	1d3de89f3c	ar71xx: build images for the ALFA Network N2/N5 boards SVN-Revision: 29636	2012-01-01 19:30:28 +00:00
Gabor Juhos	1e68f10b87	ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635	2012-01-01 19:30:25 +00:00
Gabor Juhos	5c067db8a7	ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631	2011-12-31 15:02:46 +00:00
Gabor Juhos	fff02e6ea8	ar71xx: enable SWCONFIG_LEDS SVN-Revision: 29630	2011-12-31 15:02:40 +00:00
Gabor Juhos	8c2482f76e	ar71xx: ag71xx: implement get_port_{link,stats} callbacks SVN-Revision: 29626	2011-12-31 15:02:26 +00:00
Gabor Juhos	557009bbdb	ar71xx: fix LEDs on the WRT400N SVN-Revision: 29624	2011-12-31 13:54:11 +00:00
Gabor Juhos	76dacee995	ar71xx: enable sysupgrade support for airrouter Works for me! ;-) Patch-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 29614	2011-12-27 16:59:43 +00:00
Gabor Juhos	c6ee919b2a	ar71xx: fix sysupgrade on PB42/PB44 boards SVN-Revision: 29613	2011-12-27 16:57:01 +00:00
Felix Fietkau	db0a1db257	ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 ) SVN-Revision: 29598	2011-12-22 05:43:53 +00:00
Jonas Gorski	8799627ef0	ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H Thanks netprince for reporting and testing. SVN-Revision: 29595	2011-12-21 19:32:40 +00:00
Jo-Philipp Wich	ebefe1eb3a	the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649 ) SVN-Revision: 29593	2011-12-21 01:27:48 +00:00
Felix Fietkau	11013ad947	ar71xx: add missing wireless led changes for wzr-hp-g300nh2 SVN-Revision: 29568	2011-12-19 09:04:15 +00:00
Felix Fietkau	0cc056cb7e	ar71xx: add support for the wzr-hp-g300nh2 Signed-off-by: Mark Deneen <mdeneen@gmail.com> SVN-Revision: 29567	2011-12-18 22:20:17 +00:00
Gabor Juhos	5a0a2b2f1b	ar71xx: use 64kraw template on more TP-Link boards SVN-Revision: 29561	2011-12-17 18:49:55 +00:00
Gabor Juhos	67c7980290	ar71xx: connect GMAC0 to the internal switch on DB120 Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557	2011-12-15 22:25:38 +00:00
Gabor Juhos	5bbd416e38	ar71xx: add defines for the AR934X GMAC interface SVN-Revision: 29556	2011-12-15 22:25:36 +00:00
Gabor Juhos	e47a8c2bb2	ar71xx: fix GMAC1 interface speed on the DB120 board SVN-Revision: 29555	2011-12-15 22:25:35 +00:00
Gabor Juhos	36bc2c2c80	ar71xx: ag71xx: fix switch port setup for AR934X SVN-Revision: 29554	2011-12-15 22:25:32 +00:00
Gabor Juhos	00667c3846	ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X SVN-Revision: 29553	2011-12-15 22:25:30 +00:00
Gabor Juhos	0540970345	ar71xx: ag71xx: setup switch interface mode on AR934X SVN-Revision: 29552	2011-12-15 22:25:29 +00:00
Gabor Juhos	44014110b8	ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs SVN-Revision: 29551	2011-12-15 22:25:28 +00:00
Gabor Juhos	e2a546d475	ar71xx: allow to attach the internal switch for AR934x SVN-Revision: 29550	2011-12-15 22:25:22 +00:00
Gabor Juhos	9ae65588d8	ar71xx: introduce ar71xx_switch_data SVN-Revision: 29549	2011-12-15 22:25:11 +00:00
Gabor Juhos	bfe747b7d9	ar71xx: build images for TL-WR741N/ND v2 SVN-Revision: 29548	2011-12-15 22:03:48 +00:00
Gabor Juhos	aefff26624	ar71x: use raw squashfs images for TP-Link boards SVN-Revision: 29547	2011-12-15 22:03:46 +00:00
Gabor Juhos	d5bd28ffae	ar71xx: create a template for using unpadded squashfs images SVN-Revision: 29546	2011-12-15 22:03:45 +00:00
Gabor Juhos	dbc4fa4b5b	ar71xx: put squash image right after the kernel on TP-Link boards SVN-Revision: 29545	2011-12-15 22:03:44 +00:00
Gabor Juhos	850be54b72	ar71xx: tplinkpart: allow to detect JFFS2 as well SVN-Revision: 29543	2011-12-15 22:03:40 +00:00
Gabor Juhos	b7d7481b07	ar71xx: ag71xx: check PHY IDs before accessing the switch registers SVN-Revision: 29541	2011-12-15 13:25:23 +00:00
Gabor Juhos	0655552860	ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x SVN-Revision: 29540	2011-12-15 13:25:21 +00:00
Gabor Juhos	204fc6bed5	ar71xx: ag71xx: nuke ar7240sw_init SVN-Revision: 29539	2011-12-15 13:25:20 +00:00
Gabor Juhos	d1f7783612	ar71xx: fix mac addresses on jjPlus devices SVN-Revision: 29538	2011-12-15 13:25:18 +00:00
Gabor Juhos	d3058b8f8c	ar71xx: build image for the Hornet-UB board SVN-Revision: 29536	2011-12-14 20:54:11 +00:00
Gabor Juhos	b9c5cb5c9a	ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535	2011-12-14 20:54:10 +00:00
Gabor Juhos	66c8cc0f6d	ar71xx: add GPIO function bit defines for AR933X SVN-Revision: 29534	2011-12-14 20:54:07 +00:00
Felix Fietkau	7076d74b21	ar71xx: fix gpio count for ar7241/ar7242 SVN-Revision: 29532	2011-12-14 20:47:24 +00:00
Felix Fietkau	b878f4a927	ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h SVN-Revision: 29531	2011-12-14 20:21:42 +00:00
Gabor Juhos	d2717d3d47	ar71xx: get rid of squashfs-4k images SVN-Revision: 29522	2011-12-13 20:41:24 +00:00
Felix Fietkau	4a441570ca	kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets SVN-Revision: 29516	2011-12-13 15:14:59 +00:00
Felix Fietkau	3806671fe5	ar71xx: fix wireless led on wzr-hp-g450h SVN-Revision: 29515	2011-12-13 15:00:43 +00:00
Gabor Juhos	2dd7dfb1c9	ar71xx: enable AR9341 support at setup.c Patch-by: dyq <729650915@qq.com> SVN-Revision: 29514	2011-12-13 14:59:43 +00:00
Gabor Juhos	058998acdb	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29513	2011-12-13 14:59:40 +00:00
Felix Fietkau	48f9717371	ar71xx: add gpios and usb for wzr-hp-g450h SVN-Revision: 29509	2011-12-13 13:33:44 +00:00
Gabor Juhos	4ca2d86493	ar71xx: use RedBoot parser on PB44 SVN-Revision: 29501	2011-12-11 15:52:47 +00:00
Gabor Juhos	6e69765559	ar71xx: fix WNDR3x00 factory image generation Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs for the device: field in their DNI tags, not WNDR3700. This regressed in r29434, which redid WNDR3x00 model detection. The sixth parameter to Image/Build/Netgear is only used as the -B argument to mkdniimg, which is used to set the device: field. In r29434, this was erroneously changed to be WNDR3700 for all models. The tools to flash factory images (U-Boot's TFTP server and the factory software's upgrade utility) may refuse to honor images with incorrect device: fields in their DNI tags. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29473	2011-12-07 06:55:50 +00:00
Gabor Juhos	8eb8a6e1e7	ar71xx: fix WNDR3x00 model detection Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset 56 in the art (caldata) mtd partition. r29434 redid WNDR3x00 model detection, attempting to distinguish between WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it contained a bug: it put the awk inside a $(...), with the result that all WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch checks the model name stored in the art partition, as is done by U-Boot shipping on the WNDR3800. It has the likely advantage of working with future models based on the WNDR3700 board. It also will not mis-detect units on which people install more memory. I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29472	2011-12-07 06:55:39 +00:00
Gabor Juhos	c6b2b98812	ar71xx: create firmware image for the TL-WR740N/ND v4 boards Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com> SVN-Revision: 29468	2011-12-06 16:26:44 +00:00
Gabor Juhos	fbfad4e9b4	ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw SVN-Revision: 29467	2011-12-06 16:26:43 +00:00
Gabor Juhos	d753e08c79	ar71xx: fix TL-MR3x20 profile names in image/Makefile SVN-Revision: 29463	2011-12-06 13:53:21 +00:00
Gabor Juhos	62d8009cdd	ar71xx: cleanup TP-Link profiles SVN-Revision: 29461	2011-12-06 10:29:25 +00:00
Gabor Juhos	f7a482d382	ar71xx: add TP-Link board detection SVN-Revision: 29459	2011-12-05 21:11:01 +00:00
Gabor Juhos	bdc2eca7de	ar71xx: use correct mac on the lan interface on several TP-LINK devices SVN-Revision: 29458	2011-12-05 21:10:58 +00:00
Gabor Juhos	0103069372	ar71xx: allow to pass negative offset values for ar71xx_init_mac SVN-Revision: 29457	2011-12-05 21:10:55 +00:00
Gabor Juhos	ada92aee62	ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set SVN-Revision: 29456	2011-12-05 18:21:15 +00:00
Gabor Juhos	c6bcf8d1d8	ar71xx: verify hardware id of firmware images on TP-Link boards SVN-Revision: 29455	2011-12-05 18:11:51 +00:00
Gabor Juhos	4dc9092f4b	ar71xx: reclaim some unused space on TP-Link boards With the default OpenWrt configuration, this increases the size of the rootfs_data partition by 384KB/128KB on the older/newer TP-Link models. SVN-Revision: 29447	2011-12-05 14:52:36 +00:00
Gabor Juhos	3e7a6d182a	ar71xx: check squashfs signature in TP-Link mtd parser SVN-Revision: 29446	2011-12-05 14:52:33 +00:00
Gabor Juhos	feebf484ba	ar71xx: use the lzma-loader on TP-Link boards w/o lzma support SVN-Revision: 29444	2011-12-05 14:52:28 +00:00
Gabor Juhos	d42968351f	ar71xx: add lzma loader SVN-Revision: 29443	2011-12-05 14:52:25 +00:00
Felix Fietkau	1f809532de	ar71xx: add preliminary support for wzr-hp-g450h SVN-Revision: 29441	2011-12-05 14:20:51 +00:00
Felix Fietkau	d1f63f8538	ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well SVN-Revision: 29440	2011-12-05 14:20:44 +00:00
Gabor Juhos	4cc2b9bb06	ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434	2011-12-05 13:03:54 +00:00
Jo-Philipp Wich	78699c2e51	add some missing wndr3800 base-files definitions SVN-Revision: 29433	2011-12-05 12:56:21 +00:00
Gabor Juhos	5177814ade	ar71xx: change user-space board detection SVN-Revision: 29432	2011-12-05 12:56:20 +00:00
Gabor Juhos	8a3a60fc64	ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big SVN-Revision: 29431	2011-12-05 12:47:53 +00:00
Gabor Juhos	7cfa39f032	ar71xx: use the tp-link parser on the tp-link boards Also remove static partition maps. SVN-Revision: 29416	2011-12-03 18:13:31 +00:00
Gabor Juhos	514b1167c9	ar71xx: add mtd partition parser for the TP-Link boards SVN-Revision: 29415	2011-12-03 18:13:27 +00:00
Gabor Juhos	fc7fb29bae	ar71xx: run the RedBoot parser only on the RedBoot based boards SVN-Revision: 29414	2011-12-03 18:13:25 +00:00
Gabor Juhos	9cc28d5aa0	ar71xx: run the MyLoader parser only on the WP543 board SVN-Revision: 29413	2011-12-03 18:13:23 +00:00
Gabor Juhos	67a0b9aada	ar71xx: run the wrt160nl parser only on the WRT160NL board Also remove static mtd partition definitions. SVN-Revision: 29412	2011-12-03 18:13:20 +00:00
Gabor Juhos	c8acd6e013	ar71xx: allow to pass part_probe types to the m25p80 driver SVN-Revision: 29411	2011-12-03 18:13:18 +00:00
Gabor Juhos	20483faed0	ar71xx: create initramfs images for the newer TP-Link boards SVN-Revision: 29410	2011-12-03 16:57:23 +00:00
Gabor Juhos	9a2005e5e6	ar71xx: remove swconfig and wpad-mini from custom profiles SVN-Revision: 29408	2011-12-03 16:33:41 +00:00
Gabor Juhos	bc1d818610	ar71xx: add uboot-envtools to the default package list SVN-Revision: 29407	2011-12-03 16:33:40 +00:00
Gabor Juhos	a02a9c3f8b	ar71xx: reclaim unused space in WNDR3700/3800 images Patch by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 29406	2011-12-03 16:33:38 +00:00
Gabor Juhos	ac82296c53	ar71xx: add a profile and build image for the OM2P board [juhosg: the name of the final image has been changed to 'openwrt-ar71xx-generic-om2p-squashfs-factory.bin'] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29397	2011-12-01 22:49:05 +00:00
Gabor Juhos	f188f1bad5	ar71xx: add support for Ubiquiti AirRouter Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu> SVN-Revision: 29395	2011-12-01 22:49:02 +00:00
Gabor Juhos	0612667c34	ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394	2011-12-01 22:48:59 +00:00
Gabor Juhos	39348e387f	ar71xx: use /lib/functions/uci-defaults.sh SVN-Revision: 29385	2011-12-01 22:48:47 +00:00
Gabor Juhos	f20797306a	ar71xx: modify phy mask of the WP543 board This fixes ethernet on newer boards. Based on a patch from #9702. SVN-Revision: 29328	2011-11-24 20:09:43 +00:00
Gabor Juhos	c20d7378e5	ar71xx: fix wndr3800 machine name This fixes the machine name in /proc/cpuinfo and luci status page machine name. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 29326	2011-11-24 20:09:38 +00:00
Gabor Juhos	600b6efc41	ar71xx: copy atheros initramfs images to the image directory SVN-Revision: 29325	2011-11-24 20:09:35 +00:00
Gabor Juhos	d97cf76790	ar71xx: specify mtd layout in command line for the DB120 board SVN-Revision: 29324	2011-11-24 20:09:32 +00:00
Gabor Juhos	9990523a0f	ar71xx: set GE0 phy_mask for AR933x SVN-Revision: 29274	2011-11-20 11:30:10 +00:00
Gabor Juhos	f27548448b	ar71xx: fix USB LED on the DB120 board SVN-Revision: 29126	2011-11-14 17:43:15 +00:00
Gabor Juhos	6ebbb1329d	ar71xx: add a function for selecting output signal on a given GPIO pin SVN-Revision: 29125	2011-11-14 17:43:14 +00:00
Gabor Juhos	0c1d3617d7	ar71xx: fix GPIO function handling on AR934x SVN-Revision: 29124	2011-11-14 17:43:13 +00:00
Gabor Juhos	aa0c8c4885	ar71xx: add AR71XX_ prefix to GPIO_REG_* defines SVN-Revision: 29123	2011-11-14 17:43:11 +00:00
Gabor Juhos	62a7795afd	ar71xx: merge nand scan patch SVN-Revision: 29122	2011-11-14 17:43:10 +00:00
Gabor Juhos	12dae96097	ar71xx: fix a compiler warning SVN-Revision: 29110	2011-11-14 13:07:47 +00:00
Gabor Juhos	5ae0fd802c	ar71xx: fix GPIO count for AR934x SVN-Revision: 29109	2011-11-14 13:07:45 +00:00
Gabor Juhos	e52269364a	ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X SVN-Revision: 29108	2011-11-14 11:49:53 +00:00
Gabor Juhos	3104d70552	ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling SVN-Revision: 29107	2011-11-14 11:49:51 +00:00
Gabor Juhos	42e8ae09b5	ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines SVN-Revision: 29106	2011-11-14 11:49:49 +00:00
Gabor Juhos	c15caea360	ar71xx: add an irq parameter for ar724x_pcibios_init SVN-Revision: 29105	2011-11-14 11:49:47 +00:00
Gabor Juhos	cf90b24bb9	ar71xx: remove hardwired interface parameters from mach-* files SVN-Revision: 29103	2011-11-14 07:38:09 +00:00
Gabor Juhos	defc79cb40	ar71xx: force hardwired interface parameters in ar71xx_add_device_eth SVN-Revision: 29102	2011-11-14 07:38:07 +00:00
Gabor Juhos	6f4bc1ce37	ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth SVN-Revision: 29101	2011-11-14 07:38:05 +00:00
Gabor Juhos	368bbc510b	ar71xx: enable has_gbit flag on AR724{0,1} SVN-Revision: 29026	2011-11-13 17:36:36 +00:00
Gabor Juhos	15d7016c9f	ar71xx: fixup onboard PCIe chip registration on the DB120 board SVN-Revision: 29022	2011-11-13 12:48:03 +00:00
Gabor Juhos	f623066e60	ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed SVN-Revision: 29021	2011-11-13 12:48:01 +00:00
Gabor Juhos	d2316b2a45	ar71xx: ag71xx: add support for getting switch port link status SVN-Revision: 29017	2011-11-13 11:27:04 +00:00
Gabor Juhos	d0db89133c	ar71xx: remove mii_ctrl resources of the ethernet devices SVN-Revision: 29016	2011-11-13 11:27:03 +00:00
Gabor Juhos	34015ed6e8	ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx SVN-Revision: 29015	2011-11-13 11:27:01 +00:00
Gabor Juhos	2d882cff23	ar71xx: ag71xx: remove unused mii_cfg related functions and defines SVN-Revision: 29014	2011-11-13 11:27:00 +00:00
Gabor Juhos	538a9493b9	ar71xx: set MII interface speed from the set_speed callbacks SVN-Revision: 29013	2011-11-13 11:26:59 +00:00
Gabor Juhos	93cd46be13	ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data Also rename the corresponding callback functions. SVN-Revision: 29012	2011-11-13 11:26:57 +00:00
Gabor Juhos	9579bb4267	ar71xx: ag71xx: remove MII interface setup code SVN-Revision: 29011	2011-11-13 11:26:56 +00:00
Gabor Juhos	da64ce8603	ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode SVN-Revision: 29010	2011-11-13 11:26:54 +00:00
Gabor Juhos	0112153a0e	ar71xx: fix occasional kernel hangs during boot on AR934x The patch taken from the linux-mips mailing list. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. SVN-Revision: 29009	2011-11-13 11:26:52 +00:00
Gabor Juhos	1afc76ea13	ar71xx: refresh kernel patches SVN-Revision: 29008	2011-11-13 11:26:51 +00:00
Gabor Juhos	5ad763075e	ar71xx: use the button for WPS control on the DB120 SVN-Revision: 28990	2011-11-12 12:50:20 +00:00
Gabor Juhos	4555be2bec	ar71xx: register the second ethernet interface on the DB120 board SVN-Revision: 28989	2011-11-12 12:50:19 +00:00
Gabor Juhos	368c6605a0	ar71xx: implement SoC specific phy interface setup SVN-Revision: 28988	2011-11-12 12:50:18 +00:00
Gabor Juhos	21d317b9cc	ar71xx: move phy interface setup into a separate function SVN-Revision: 28987	2011-11-12 12:50:16 +00:00
Gabor Juhos	aff0c84ffa	ar71xx: register both MDIO bus on the DB120 board SVN-Revision: 28986	2011-11-12 12:09:59 +00:00
Gabor Juhos	b144249108	ar71xx: add AR934X specific MDIO registration code SVN-Revision: 28985	2011-11-12 12:09:56 +00:00
Gabor Juhos	f835106c8c	ar71xx: add a secondary mdio bus SVN-Revision: 28984	2011-11-12 12:09:54 +00:00
Gabor Juhos	90a42da270	ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* SVN-Revision: 28983	2011-11-12 12:09:50 +00:00
Gabor Juhos	9daa2149fd	ar71xx: add an id argument to ar71xx_add_device_mdio SVN-Revision: 28982	2011-11-12 12:09:48 +00:00
Gabor Juhos	b07b687aec	ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa SVN-Revision: 28981	2011-11-12 12:09:42 +00:00
Gabor Juhos	a9216bb76e	ar71xx: add AR934x specific USB setup SVN-Revision: 28980	2011-11-12 10:54:20 +00:00
Gabor Juhos	346e44105a	ar71xx: register the first ethernet interface on the DB120 board SVN-Revision: 28979	2011-11-12 10:54:18 +00:00
Gabor Juhos	b1ba5e2f3d	ar71xx: allow to register ethernet interfaces for AR934X SVN-Revision: 28978	2011-11-12 10:54:17 +00:00
Gabor Juhos	2f9e535e89	ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered SVN-Revision: 28977	2011-11-12 10:54:16 +00:00
Gabor Juhos	e962b07c8b	ar71xx: add AR934X specific bootstrap and reset register bits SVN-Revision: 28976	2011-11-12 10:54:15 +00:00
Gabor Juhos	d461fdd519	ar71xx: add diag support for the DB120 board SVN-Revision: 28975	2011-11-12 10:54:10 +00:00
Gabor Juhos	d8db8e94c8	ar71xx: fix GPIO direction setup for AR934x SVN-Revision: 28974	2011-11-12 10:54:09 +00:00
Gabor Juhos	43e993e5f5	ar71xx: fix AR934X clock frequency calculation SVN-Revision: 28973	2011-11-12 10:54:08 +00:00
Gabor Juhos	8687fc3e41	ar71xx: generate ubootenv from uci-defaults instead of providing defconfig I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is indeed much nicer. So I moved over ubootenv from having a defconfig-entry to also be generated from uci-defaults. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28971	2011-11-12 10:54:04 +00:00
Felix Fietkau	7a2efd8c28	ar71xx: remove dead code SVN-Revision: 28851	2011-11-08 00:33:20 +00:00
Felix Fietkau	94309039b7	ar71xx: on ar7240, exclude ports from their own port vlan destination mask SVN-Revision: 28850	2011-11-08 00:33:15 +00:00
Gabor Juhos	87704b8078	ar71xx: create TL-WA901ND network config from uci-defaults SVN-Revision: 28833	2011-11-07 21:44:24 +00:00
Gabor Juhos	09fdfa444f	ar71xx: create ALL0258N network config from uci-defaults SVN-Revision: 28832	2011-11-07 21:44:23 +00:00
Gabor Juhos	63348f5fed	ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults SVN-Revision: 28831	2011-11-07 21:44:20 +00:00
Gabor Juhos	c3692c8331	ar71xx: create WZR-HP-G300NH network config from uci-defaults SVN-Revision: 28830	2011-11-07 21:44:17 +00:00
Gabor Juhos	ee1a07a11d	ar71xx: create RB-493G network config from uci-defaults SVN-Revision: 28829	2011-11-07 21:44:12 +00:00
Gabor Juhos	d82d063d81	ar71xx: create TL-WR1043ND network config from uci-defaults SVN-Revision: 28828	2011-11-07 21:44:11 +00:00
Gabor Juhos	68be590894	ar71xx: create WRT160NL network config from uci-defaults SVN-Revision: 28827	2011-11-07 21:44:09 +00:00
Gabor Juhos	83901e47c9	ar71xx: create PB92 network config from uci-defaults SVN-Revision: 28826	2011-11-07 21:44:08 +00:00
Gabor Juhos	22ab9fc9ad	ar71xx: create DIR-825-B1 network config from uci-defaults SVN-Revision: 28825	2011-11-07 21:44:07 +00:00
Gabor Juhos	e866ba5753	ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults SVN-Revision: 28824	2011-11-07 21:44:03 +00:00
Gabor Juhos	9298c7afe5	ar71xx: create RB-450 network config from uci-defaults SVN-Revision: 28823	2011-11-07 21:44:02 +00:00
Gabor Juhos	ac256f97bd	ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults SVN-Revision: 28822	2011-11-07 21:44:01 +00:00
Gabor Juhos	944ac3f6cf	ar71xx: create RB-433{,U} network config from uci defaults SVN-Revision: 28821	2011-11-07 21:43:58 +00:00
Gabor Juhos	6e8390ae6c	ar71xx: create even more network configs from the uci-defaults script Create the default network configuration dynamically for the AR724x/AR9331 boards. Some other boards are using the same configuration, so convert those as well. SVN-Revision: 28820	2011-11-07 21:43:56 +00:00
Gabor Juhos	b62560413a	ar71xx: create more network configs from the uci-defaults script Create the default network configuration dynamically for the boards with swapped eth0, eth1 interfaces. SVN-Revision: 28819	2011-11-07 21:43:54 +00:00
Gabor Juhos	6c92b26bac	ar71xx: create a bunch of network configs from the uci-defaults script Create the default network configuration dynamically for the boards with a single ethernet interface. SVN-Revision: 28818	2011-11-07 21:43:52 +00:00
Gabor Juhos	0a8e5dbf7b	ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817	2011-11-07 21:43:51 +00:00
Gabor Juhos	54c034ae7a	ar71xx: remove AP81 defconfig, it is the same as the generic config SVN-Revision: 28816	2011-11-07 21:34:33 +00:00
Gabor Juhos	5b6cc3eb9f	ar71xx: change generated Buffalo firmware versions With version 1.76 the upgrade may fail with newer Buffalo firmwares with a message like this: "You can not update the firmware because the firmware version is earlier than 1.82. Please use 1.82 or later version for firmware update." SVN-Revision: 28815	2011-11-07 21:34:32 +00:00
Gabor Juhos	eb9ef60e2d	ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards SVN-Revision: 28812	2011-11-07 20:25:00 +00:00
Gabor Juhos	8456840d82	ar71xx: wrap long lines in the upgrade script SVN-Revision: 28811	2011-11-07 20:24:59 +00:00
Gabor Juhos	c60baf78ce	ar71xx: fix WHR-HP-G300N firmware partition offset SVN-Revision: 28810	2011-11-07 20:24:57 +00:00
Gabor Juhos	b27254a2c5	ar71xx: add default network configuration for the WHR-HP-GN SVN-Revision: 28807	2011-11-07 13:32:43 +00:00
Gabor Juhos	034b2b7cde	ar71xx: build image for the Buffalo WHR-HP-GN SVN-Revision: 28806	2011-11-07 12:59:11 +00:00
Gabor Juhos	a801d620a7	ar71xx: add support for the Buffalo WHR-HP-GN board SVN-Revision: 28805	2011-11-07 12:59:10 +00:00
Gabor Juhos	0d9ae0a036	ar71xx: build image for the Buffalo WHR-G301N SVN-Revision: 28804	2011-11-07 12:59:08 +00:00
Gabor Juhos	4509af17ed	ar71xx: add support for the Buffalo WHR-G301N board SVN-Revision: 28803	2011-11-07 12:59:07 +00:00
Gabor Juhos	63784ea2bc	ar71xx: fix WHR-HP-G300N image generation SVN-Revision: 28802	2011-11-07 12:59:05 +00:00
Gabor Juhos	b3b21cb3bf	ar71xx: enable WHR-HP-G300N support in kernel config SVN-Revision: 28801	2011-11-07 12:59:04 +00:00
Gabor Juhos	4aace1e2e3	ar71xx: fix WHR-HP-G300N MTD partitions SVN-Revision: 28800	2011-11-07 12:59:03 +00:00
Gabor Juhos	4c985724af	ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 SVN-Revision: 28709	2011-11-01 14:38:12 +00:00
Gabor Juhos	fc8adbb854	ar71xx: build image for the TL-WR741ND v4 board SVN-Revision: 28708	2011-11-01 11:20:55 +00:00
Gabor Juhos	91f08d47c2	ar71xx: add initial support for the TL-WR741ND v4 board The ethernet port LEDs are not working yet. SVN-Revision: 28706	2011-11-01 11:20:52 +00:00
Gabor Juhos	21e651c9a1	ar71xx: add AR933X GMAC register defines SVN-Revision: 28705	2011-11-01 11:20:50 +00:00
Gabor Juhos	43e2e2e4ef	ar71xx: combine LEDs setup in one file SVN-Revision: 28704	2011-11-01 11:20:49 +00:00
Gabor Juhos	f372620ffa	ar71xx: unify LED names on Planex boards SVN-Revision: 28703	2011-11-01 11:20:47 +00:00
Gabor Juhos	66ab406d5a	ar71xx: unify LED names on Buffalo boards SVN-Revision: 28702	2011-11-01 11:20:46 +00:00
Gabor Juhos	e7586959df	ar71xx: unify LED names on TP-Link boards SVN-Revision: 28701	2011-11-01 11:20:44 +00:00
Gabor Juhos	3a7b12a27d	ar71xx/all0258n: sysupgrade support U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be stored in the U-Boot environment. If the checksums don't match during boot, a failsafe-system is booted instead. This patch adds a board-specific sysupgrade hack for the all0258n which calculates and updates the checksums for the U-Boot environment. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28700	2011-11-01 09:23:32 +00:00
Gabor Juhos	f40557a692	ar71xx/all0258n: add default config This adds default network and uboot-env settings for the ALL0258N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28699	2011-11-01 09:23:31 +00:00
Gabor Juhos	06d9653b36	ar71xx: remove default network config of the mzk-w04nu board as well It works with the generic config. SVN-Revision: 28695	2011-11-01 09:23:25 +00:00
Gabor Juhos	693c777eaf	ar71xx: remove LED setup of nonexistent interfaces on RB750 SVN-Revision: 28693	2011-10-31 14:26:56 +00:00
Gabor Juhos	2bcd612e72	ar71xx: remove default network config of the wnr2000 board It is the same as the generic configuration. SVN-Revision: 28692	2011-10-31 14:26:51 +00:00
Gabor Juhos	39b3bfcf6a	ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28678	2011-10-30 13:06:30 +00:00
Gabor Juhos	415814f051	ar71xx: fix typos in image/Makefile SVN-Revision: 28618	2011-10-27 07:54:52 +00:00
Gabor Juhos	1646346798	ar71xx: add initial support for the OpenMesh OM2P board Based on a patch by Marek Lindner <marek@open-mesh.com> SVN-Revision: 28617	2011-10-27 07:54:51 +00:00
Gabor Juhos	d02f22fea1	ar71xx/all0258n: fix partition layout A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28615	2011-10-27 07:54:47 +00:00
Gabor Juhos	4a70cace09	ar71xx: create image for the WNDR3800 This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> SVN-Revision: 28597	2011-10-26 06:12:47 +00:00
Gabor Juhos	c8b9086ac5	ar71xx: build image for the Buffalo WHR-HP-G300N Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28568	2011-10-24 21:49:29 +00:00
Gabor Juhos	9d51cda2db	ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567	2011-10-24 21:49:26 +00:00
Gabor Juhos	0ab6be2ba3	ar71xx: build image for the Allnet ALL0258N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28565	2011-10-24 21:49:23 +00:00
Gabor Juhos	d96e321bd1	ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564	2011-10-24 21:49:21 +00:00
Gabor Juhos	ef41e0a61c	ar71xx: don't override CONFIG_FSNOTIFY SVN-Revision: 28563	2011-10-24 21:49:18 +00:00
Jo-Philipp Wich	b61de9c865	base-files: make sure inittab-console-fixup returns with success (#10275 ) SVN-Revision: 28562	2011-10-24 21:35:43 +00:00
Jonas Gorski	a136b67604	linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423	2011-10-11 23:05:16 +00:00
Jonas Gorski	03f91068d1	ar71xx: add a workaround for ar8316 not always driving the TA bit to low AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. SVN-Revision: 28422	2011-10-11 23:05:13 +00:00
Jonas Gorski	c674c874b7	ag71xx: close a race between the phy state machine and link state A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. SVN-Revision: 28380	2011-10-08 11:37:14 +00:00
Gabor Juhos	6ac4156136	ar71xx: fix MAC addresses on the DIR-825-B1 board Patch-by: Lukas Kuna SVN-Revision: 28295	2011-09-23 19:56:39 +00:00
Gabor Juhos	e45d7d7006	ar71xx: enable login only on the system console by default SVN-Revision: 28294	2011-09-23 19:56:38 +00:00
Gabor Juhos	49ac36e818	ar71xx: build images for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28279	2011-09-21 11:47:56 +00:00
Gabor Juhos	733399600f	ar71xx: add support for the TP-Link TL-WR703N v1 board Based on a patch by dongyuqi <729650915@qq.com> SVN-Revision: 28277	2011-09-21 11:47:53 +00:00
Gabor Juhos	d3617ac7d3	ar71xx: add AR933x specific USB setup function SVN-Revision: 28276	2011-09-21 11:47:51 +00:00
Gabor Juhos	91340d8af7	ar71xx: add ar71xx_device_reset_rmw helper SVN-Revision: 28275	2011-09-21 11:47:50 +00:00
Gabor Juhos	9fa51d5c38	ar71xx: fix copy&paste bug in WZRHPAG300H profile description SVN-Revision: 28274	2011-09-21 11:47:48 +00:00
Gabor Juhos	079e746fc4	ar71xx: remove 'default [yn]' from machine Kconfig entries SVN-Revision: 28273	2011-09-21 11:47:47 +00:00
Gabor Juhos	73dac07c44	ar71xx: sort AR71XX_MACH_* entries SVN-Revision: 28272	2011-09-21 11:47:45 +00:00
Gabor Juhos	ef2431c8d9	ar71xx: create image for the TP-Link TL-WR743ND v1 Same hardware as WR741ND but with PoE support. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 28271	2011-09-21 11:47:44 +00:00
Gabor Juhos	76d0d1a837	ar71xx: create image for the TP-Link TL-WR740N v3 Signed-off-by: Martin Raykov <martin.raykov@gmail.com> SVN-Revision: 28269	2011-09-21 11:47:40 +00:00
Felix Fietkau	1bdf65f580	ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) SVN-Revision: 28213	2011-09-11 17:44:12 +00:00
Felix Fietkau	65d809ef19	ar71xx: do not count normal interrupts as spurious (fixes #10037 ) SVN-Revision: 28182	2011-09-06 05:38:23 +00:00
Felix Fietkau	de8cabe839	ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954 ) SVN-Revision: 28173	2011-09-05 18:37:48 +00:00
Felix Fietkau	cd2c68501c	ar71xx: fix ethernet PLL setting on ar7242 SVN-Revision: 28124	2011-08-29 21:23:46 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Felix Fietkau	12c84f8eeb	ar71xx: add some code to detect DMA stuck conditions on ar7240 SVN-Revision: 27975	2011-08-13 22:30:14 +00:00
Felix Fietkau	85ccc74e1b	ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues SVN-Revision: 27973	2011-08-13 21:49:46 +00:00
Felix Fietkau	d26bb6c59c	ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922 ) SVN-Revision: 27959	2011-08-11 13:52:40 +00:00
Jonas Gorski	def60e2918	ar71xx: make ehci patch apply again SVN-Revision: 27951	2011-08-10 23:02:56 +00:00
Felix Fietkau	9e5ead9a51	ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918 ) SVN-Revision: 27950	2011-08-10 22:24:56 +00:00
Gabor Juhos	7e5a1bc1d0	ar71xx: fix image generation SVN-Revision: 27907	2011-08-05 10:31:52 +00:00
Gabor Juhos	85b858fae6	ar71xx: enable sysupgrade on the AP96 and DB120 boards SVN-Revision: 27901	2011-08-04 19:41:18 +00:00
Gabor Juhos	fb77134596	ar71xx: use the same test for AP121 and Zcomax sysupgrade images SVN-Revision: 27900	2011-08-04 19:41:17 +00:00
Gabor Juhos	fd3a5f64f2	ar71xx: cleanup image generation Makefile SVN-Revision: 27899	2011-08-04 19:41:16 +00:00
Felix Fietkau	4b75394056	ar71xx: fix ethernet FIFO state corruption on ar7240 When starting/stopping DMA sometimes the FIFO state gets corrupted, leading to wildly fluctuating latencies or packet data corruption. Fix this by issuing a fast MAC reset as soon as the link is detected as up. Fixes #9689, #9405 SVN-Revision: 27896	2011-08-04 17:36:31 +00:00
Felix Fietkau	d2aeca6b6d	ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop When the DMA engine state gets corrupted due to a hardware issues, it often won't stop rx until a full reset is issued. In that case the hardware must keep a valid descriptor, otherwise it will write to random places in system RAM, triggering random crashes. To fix this, keep a dummy descriptor without a buffer that keeps the DMA engine in a sane state until the reset is done SVN-Revision: 27895	2011-08-04 17:36:27 +00:00
Felix Fietkau	500c3a1475	ar71xx: fix MAC/MDIO reset mask handling SVN-Revision: 27894	2011-08-04 17:36:23 +00:00
Felix Fietkau	54d97e6782	ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% SVN-Revision: 27878	2011-08-02 15:12:08 +00:00
Jonas Gorski	e18ceb1dac	ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH Now that we can use a generic name for the switch there is no need for a separate image for the WZR-HP-G301NH. Update the default network config and remove the extra image. SVN-Revision: 27814	2011-07-28 11:57:51 +00:00
Felix Fietkau	9e4113b493	ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh SVN-Revision: 27756	2011-07-24 14:40:35 +00:00
Felix Fietkau	1afe8a0726	rtl8366: unify rtl8366s and rtl8366rb platform data SVN-Revision: 27754	2011-07-24 14:40:23 +00:00
Felix Fietkau	9105dad418	ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684 ) SVN-Revision: 27739	2011-07-24 08:02:20 +00:00
Felix Fietkau	c7173a211d	ar71xx: reinitialize global switch settings after reset on ar7240 SVN-Revision: 27705	2011-07-20 14:39:47 +00:00
Felix Fietkau	ca473833c4	ar71xx: configure address aging on ar7240 SVN-Revision: 27704	2011-07-20 14:39:42 +00:00
Felix Fietkau	fefc79f3cb	ar71xx: reset the phy in the ethernet init on ar724x SVN-Revision: 27703	2011-07-20 12:04:34 +00:00
Felix Fietkau	005fe5d1fd	ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset SVN-Revision: 27702	2011-07-20 12:04:29 +00:00
Felix Fietkau	e7ab000008	ar71xx: increase the delay after the ethernet MAC reset SVN-Revision: 27701	2011-07-20 12:04:25 +00:00
Felix Fietkau	255dcaa3a6	ar71xx: fix an unused variable warning SVN-Revision: 27700	2011-07-20 12:04:20 +00:00
Felix Fietkau	f3d693c0ee	ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state SVN-Revision: 27568	2011-07-09 06:30:13 +00:00
Felix Fietkau	2806c75c07	ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 SVN-Revision: 27567	2011-07-09 06:29:46 +00:00
Gabor Juhos	5ad4040c49	ar71xx: build image for the AP121 boards with 4M of flash SVN-Revision: 27523	2011-07-07 13:01:50 +00:00
Gabor Juhos	cdcb10ee42	ar71xx: add separate profiles for the AP121 and AP121-MINI boards SVN-Revision: 27522	2011-07-07 13:01:48 +00:00
Gabor Juhos	89f6b29feb	ar71xx: fix building of squashfs images SVN-Revision: 27446	2011-07-04 12:10:03 +00:00
Felix Fietkau	7afed2d86c	ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650 ) SVN-Revision: 27434	2011-07-04 03:03:34 +00:00
Gabor Juhos	b3a89652a5	ar71xx: use 4k image only for the AP121 board Create optimized 64K images with the new padjffs2 tool and use that images instead of the 4k ones. The 4k images causes problems on devices where the flash erase size is 64 KB. SVN-Revision: 27357	2011-07-02 08:37:59 +00:00
Jo-Philipp Wich	701543d3ef	revert r27043 (#9513 ) SVN-Revision: 27343	2011-07-01 19:52:57 +00:00
Jo-Philipp Wich	1edef5ec98	revert r27341, it introduce wrong behaviour for other models SVN-Revision: 27342	2011-07-01 19:15:45 +00:00
Jo-Philipp Wich	3b3103b2f1	turn status LED off if device finished initializing SVN-Revision: 27341	2011-07-01 18:39:53 +00:00
Gabor Juhos	f9e4619b97	ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code The config option has been removed in 2.6.39. SVN-Revision: 27320	2011-06-30 12:15:33 +00:00
Gabor Juhos	d98476c6bd	ar71xx: merge 2.6.39 patches Also remove the old UART driver for ar933x. SVN-Revision: 27314	2011-06-29 08:57:37 +00:00
Gabor Juhos	74a88749f3	ar71xx: remove 2.6.37 support as well SVN-Revision: 27313	2011-06-29 08:57:36 +00:00
Gabor Juhos	1d5378f588	ar71xx: remove 2.6.38 support SVN-Revision: 27312	2011-06-29 08:57:34 +00:00
Gabor Juhos	36e7a8b33e	ar71xx: switch to 2.6.39 SVN-Revision: 27311	2011-06-29 08:57:33 +00:00
Gabor Juhos	6627574e57	ar71xx: add 2.6.39 support SVN-Revision: 27310	2011-06-29 08:57:32 +00:00
Gabor Juhos	1e138098cd	ar71xx: remove ar71xx_gpio_irq_set_type SVN-Revision: 27309	2011-06-29 08:57:30 +00:00
Gabor Juhos	055e317ed8	ar71xx: add separate handlers for IP3 interrupts SVN-Revision: 27308	2011-06-29 08:57:29 +00:00
Gabor Juhos	59bff8bf18	ar71xx: use separate handlers for IP2 interrupts SVN-Revision: 27307	2011-06-29 08:57:28 +00:00
Gabor Juhos	9d6af600e1	ar71xx: remove useless irq_desc.status initializations SVN-Revision: 27306	2011-06-29 08:57:27 +00:00
Felix Fietkau	cc56af716c	ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607 ) SVN-Revision: 27283	2011-06-25 13:54:42 +00:00
Felix Fietkau	ed7f41792a	ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608 ) SVN-Revision: 27282	2011-06-25 13:48:47 +00:00
Gabor Juhos	e6af77a1c8	ar71xx: cleanup AR933X UART driver SVN-Revision: 27222	2011-06-19 13:17:51 +00:00
Gabor Juhos	066e04d497	ar71xx: fix uart clock frequency for AR933X SVN-Revision: 27221	2011-06-19 13:17:50 +00:00
Gabor Juhos	b7e016ba42	ar71xx: use ar933x_uart.h in the AR933X serial driver SVN-Revision: 27166	2011-06-13 08:12:40 +00:00
Gabor Juhos	b58ede16a5	ar71xx: update early_printk code SVN-Revision: 27165	2011-06-13 08:12:38 +00:00
Vasilis Tsiligiannis	70106f153d	Remove trailing spaces, convert spaces to tabs SVN-Revision: 27153	2011-06-09 19:30:50 +00:00
Felix Fietkau	9160e06af5	ar71xx: override inittab to enable login on ttyATH0 SVN-Revision: 27128	2011-06-07 17:07:10 +00:00
Gabor Juhos	13363d9129	ar71xx: setup wdt_clock for AR913X to avoid a kernel bug Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27102	2011-06-04 12:30:10 +00:00
Gabor Juhos	ae2cbfa1e8	ar71xx: select the internal antenna by default on the ZCN-1523H boards SVN-Revision: 27101	2011-06-04 12:30:09 +00:00
Felix Fietkau	31dd60689e	Revert "ar71xx: only enable the rx engine after the link is up..." It messes up the DMA state when the link goes down SVN-Revision: 27088	2011-06-01 18:15:43 +00:00
Gabor Juhos	750af1522b	ar71xx: init external_reset for AR933X SVN-Revision: 27083	2011-06-01 13:12:30 +00:00
Gabor Juhos	af4cae4498	ar71xx: add external_reset field to ath9k_platform_data SVN-Revision: 27082	2011-06-01 13:12:28 +00:00
Gabor Juhos	f0c7b93e5d	ar71xx: init get_mac_revision on AR9330 rev 1 SVN-Revision: 27081	2011-06-01 13:12:27 +00:00
Gabor Juhos	1a54e33c17	ar71xx: add get_mac_revision to ath9k_platform_data SVN-Revision: 27080	2011-06-01 13:12:26 +00:00
Gabor Juhos	34ff32a6eb	ar71xx: export SoC revision SVN-Revision: 27079	2011-06-01 13:12:24 +00:00
Felix Fietkau	86dbc3a02d	ar71xx: add profile and image building code for wzr-hp-ag300h SVN-Revision: 27076	2011-06-01 02:23:30 +00:00
Felix Fietkau	4f06b8263a	ar71xx: add kernel support for the buffalo wzr-hp-ag300h SVN-Revision: 27075	2011-06-01 02:23:26 +00:00
Gabor Juhos	33fdc21d40	ar71xx: build images for the AP121 boards SVN-Revision: 27070	2011-05-31 22:53:47 +00:00
Gabor Juhos	9e435c03e0	ar71xx: add sysupgrade support for the AP121 boards SVN-Revision: 27069	2011-05-31 22:53:45 +00:00
Gabor Juhos	646937135f	ar71xx: add default network config for the AP121 boards SVN-Revision: 27068	2011-05-31 22:53:44 +00:00
Gabor Juhos	f332dbd7be	ar71xx: add support for the AP121/AP121-MINI reference boards SVN-Revision: 27067	2011-05-31 22:53:43 +00:00
Gabor Juhos	8beff081eb	ar71xx: register UART for the AR933X SoCs SVN-Revision: 27066	2011-05-31 22:53:42 +00:00
Gabor Juhos	b460bc6f12	ar71xx: add serial driver for the AR933X UART SVN-Revision: 27065	2011-05-31 22:53:40 +00:00
Gabor Juhos	c34e0cbc4c	ar71xx: add WMAC initialization code for the AR933X SoCs SVN-Revision: 27064	2011-05-31 22:53:39 +00:00
Gabor Juhos	e8a0aaf9a2	ar71xx: add ethernet initialization for the AR933X SoCs SVN-Revision: 27063	2011-05-31 22:53:37 +00:00
Gabor Juhos	e0a0f3796a	ar71xx: enable USB support for the AR933x SoCs SVN-Revision: 27062	2011-05-31 22:53:36 +00:00
Gabor Juhos	677c80ee17	ar71xx: add AR933x specific glue for ar71xx_device{start,stop} SVN-Revision: 27061	2011-05-31 22:53:35 +00:00
Gabor Juhos	88c45e3130	ar71xx: the watchdog uses the reference clock on the AR933x SoCs SVN-Revision: 27060	2011-05-31 22:53:34 +00:00
Gabor Juhos	7acbacab8c	ar71xx: add AR933x specific glue code for IRQ initialization SVN-Revision: 27059	2011-05-31 22:53:32 +00:00
Gabor Juhos	e6fde61bec	ar71xx: don't register 8250 UART on the AR933x SoCs SVN-Revision: 27058	2011-05-31 22:53:31 +00:00
Gabor Juhos	8f7541a044	ar71xx: enable GPIO support for the AR933x SoCs SVN-Revision: 27057	2011-05-31 22:53:30 +00:00
Gabor Juhos	e11b9c8371	ar71xx: add AR933x specific frequency initialization code SVN-Revision: 27056	2011-05-31 22:53:29 +00:00
Gabor Juhos	0bf4478d37	ar71xx: add AR933x specific early_printk support SVN-Revision: 27055	2011-05-31 22:53:27 +00:00
Gabor Juhos	6b3ca9ef0b	ar71xx: add preliminary support for the Atheros AR933x SoCs SVN-Revision: 27054	2011-05-31 22:53:26 +00:00
Gabor Juhos	761e67b394	ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 NETGEAR doesnt produce a distinct North American image for WNDR3700v2, they use the same image worldwide. This is a change from earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and WNDRMAC images use 29763654+16+64 as their hd_id value. This patch changes the OpenWrt WNDR3700v2 "factory" image generation to stop producing the extraneous -NA version and to tag the image with the same hd_id used in NETGEAR's images. There is no change to WNDR3700 (v1) image generation, as NETGEAR continues to produce distinct -NA and worldwide images, neither of which are tagged with hd_id. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 27053	2011-05-31 22:53:25 +00:00
Gabor Juhos	c8d182406d	ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards SVN-Revision: 27051	2011-05-31 22:53:22 +00:00
Gabor Juhos	0677e16248	ar71xx: Fix header offset for newer WRT160NL models Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K, resulting in miscalculated partition sizes. Since the actual sizes did not change, hardcode them to their current sizes, and make sure they are at least one erase block big (in case Cisco decides to start to use chips with 128K erase blocks). Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27049	2011-05-31 22:53:20 +00:00
Gabor Juhos	be97e2a043	ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols SVN-Revision: 27048	2011-05-31 22:53:19 +00:00
Gabor Juhos	ea2f6d0edf	ar71xx: reduce the size of the squashfs-4k binaries SVN-Revision: 27047	2011-05-31 22:53:18 +00:00
Gabor Juhos	5d5f72415e	ar71xx: initialize is_clk_25mhz field for AR9340 WMAC SVN-Revision: 27045	2011-05-31 22:53:15 +00:00
Gabor Juhos	f7b3c3dfd1	ar71xx: sync ath9k_platform_data.h with compat-wireless SVN-Revision: 27044	2011-05-31 22:53:14 +00:00
Gabor Juhos	650c7cc2fd	ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards SVN-Revision: 27043	2011-05-31 22:53:13 +00:00
Gabor Juhos	4834fdaccd	ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards SVN-Revision: 27042	2011-05-31 22:53:12 +00:00
Gabor Juhos	60d5abbc27	ar71xx: ag71xx: make ring sizes configurable via ethtool SVN-Revision: 27041	2011-05-31 22:53:10 +00:00
Gabor Juhos	7a2651f633	ar71xx: ag71xx: prepare to make ring sizes configurable SVN-Revision: 27040	2011-05-31 22:53:09 +00:00
Gabor Juhos	669aba3871	ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define Reported-by: Dave Täht <dave.taht@gmail.com> SVN-Revision: 27039	2011-05-31 22:53:07 +00:00
Felix Fietkau	2b5402d128	ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) SVN-Revision: 27035	2011-05-30 23:08:01 +00:00
Felix Fietkau	0ebc93831f	ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames SVN-Revision: 27034	2011-05-30 23:07:57 +00:00
Matteo Croce	17e257925f	ar71xx: don't probe the LAN PHY SVN-Revision: 26924	2011-05-17 11:15:24 +00:00
Matteo Croce	4deecea26b	ar71xx: detect link on LAN ports SVN-Revision: 26922	2011-05-17 11:12:56 +00:00
Matteo Croce	2ea528d1d0	ar71xx: add link detection on Ubiquiti devices WAN port SVN-Revision: 26891	2011-05-14 23:31:50 +00:00
Matteo Croce	c0c2e18452	use correct macros and frame size in ag71xx SVN-Revision: 26890	2011-05-14 23:10:06 +00:00
Matteo Croce	99d1d4f795	ar71xx: cosmetic fixes SVN-Revision: 26889	2011-05-14 23:08:00 +00:00
Gabor Juhos	9b5036a29d	ar71xx: populate LED3 on the JA76PF board Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> SVN-Revision: 26862	2011-05-08 21:38:51 +00:00
Gabor Juhos	b39eebdf1e	ar71xx: add uci config for the WLAN LED on the WRT160NL Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> SVN-Revision: 26861	2011-05-08 21:38:49 +00:00
Gabor Juhos	858e2e719b	ar71xx: use phy0tpt trigger for the WLAN LEDs SVN-Revision: 26860	2011-05-08 21:38:48 +00:00
Gabor Juhos	869f3cb718	ar71xx: remove superfluous fifo_cfg overrides SVN-Revision: 26859	2011-05-08 21:38:46 +00:00
Gabor Juhos	5d77f370d6	ar71xx: ag71xx: make switch register access atomic Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec SVN-Revision: 26856	2011-05-08 16:32:53 +00:00
Gabor Juhos	3711658281	ar71xx: ag71xx: fix section mismatch warnings The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. SVN-Revision: 26855	2011-05-08 13:30:36 +00:00
Gabor Juhos	ef53029870	ar71xx: ag71xx: fix build error if debugfs is enabled SVN-Revision: 26854	2011-05-08 13:30:26 +00:00
Gabor Juhos	8b67d748cb	ar71xx: ag71xx: add debugfs entry for [rt]x_ring SVN-Revision: 26845	2011-05-07 12:40:34 +00:00
Gabor Juhos	2166432ba0	ar71xx: ag71xx: add timestamps to ag71xx_buf SVN-Revision: 26844	2011-05-07 12:40:28 +00:00
Gabor Juhos	896e1d1ab4	ar71xx: ag71xx: use dynamically allocated buffer for napi_stats SVN-Revision: 26843	2011-05-07 12:40:26 +00:00
Gabor Juhos	a6708d20d1	ar71xx: ag71xx: use debugfs_remove_recursive SVN-Revision: 26842	2011-05-07 12:40:25 +00:00
Gabor Juhos	c39e5b9360	ar71xx: override wmac device name for the AR934x SoCs SVN-Revision: 26840	2011-05-07 09:23:32 +00:00
Alexandros C. Couloumbis	7fb06ce6cd	linux/ar71xx: add some missing symbols for nand/yaffs targets SVN-Revision: 26827	2011-05-05 07:19:46 +00:00
Felix Fietkau	cbc75a9c70	ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config SVN-Revision: 26779	2011-04-28 21:27:42 +00:00
Felix Fietkau	36aecb08b8	ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) SVN-Revision: 26777	2011-04-28 19:30:49 +00:00
Alexandros C. Couloumbis	f13581eedb	linux/ar71xx: update wget2nand script SVN-Revision: 26747	2011-04-21 12:38:25 +00:00
Alexandros C. Couloumbis	015b010f90	linux/ar71xx: add 2.6.38 preliminary support SVN-Revision: 26746	2011-04-21 11:45:23 +00:00
Felix Fietkau	cddc775ee8	ar71xx: enable the ip17xx PHY driver (fixes #5193 , #8027 ) SVN-Revision: 26670	2011-04-14 23:51:12 +00:00
Felix Fietkau	92bd56fea1	ar71xx: replace the madwifi profile with an ath5k profile SVN-Revision: 26626	2011-04-12 21:10:45 +00:00
Gabor Juhos	fa9f45f345	ar71xx: fix build error w/o CONFIG_PCI SVN-Revision: 26606	2011-04-12 13:14:56 +00:00
Gabor Juhos	adb6217471	ar71xx: don't hardcode console parameters in kernel config SVN-Revision: 26605	2011-04-12 13:14:53 +00:00
Gabor Juhos	e193547733	ar71xx: use the gpio_keys_polled driver instead of gpio_buttons SVN-Revision: 26603	2011-04-12 09:29:21 +00:00
Gabor Juhos	54ede24829	ar71xx: Add support for WZR-HP-G301NH Add support for the Buffalo WZR-HP-G301NH. The only difference between it and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S. Since we don't do runtime detection of the switch, we need a separate machine definition for it. While we are at it, also rename the profile to reflect that it now is for more than one device. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26601	2011-04-12 09:29:10 +00:00
Gabor Juhos	ef4c1d49a6	ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac SVN-Revision: 26595	2011-04-11 17:37:08 +00:00
Gabor Juhos	4711dea8ff	ar71xx: fix AR934X_WMAC_SIZE SVN-Revision: 26594	2011-04-11 17:37:03 +00:00
Gabor Juhos	8586e61b00	ar71xx: fix section mismatch SVN-Revision: 26562	2011-04-09 18:47:55 +00:00
Gabor Juhos	a8bf5e3cdb	ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq Also initialize that for each SoC and print its value along with the other frequencies. SVN-Revision: 26561	2011-04-09 18:47:52 +00:00
Gabor Juhos	5573d6eb28	ar71xx: show the SoC type earlier SVN-Revision: 26560	2011-04-09 18:47:50 +00:00
Gabor Juhos	ab4c3b3a1c	ar71xx: cleanup SoC detection code SVN-Revision: 26559	2011-04-09 18:47:49 +00:00
Gabor Juhos	694d9059c9	ar71xx: sync kernel configuration SVN-Revision: 26558	2011-04-09 18:47:45 +00:00
Gabor Juhos	3310c70702	ar71xx: Fix mac address offset for AR934x Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> SVN-Revision: 26557	2011-04-09 18:47:42 +00:00
Gabor Juhos	8f889f9250	ar71xx: add DB120 board specific PCI initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26523	2011-04-07 20:53:41 +00:00
Gabor Juhos	a0c3d49064	ar71xx: register WMAC device on the DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26522	2011-04-07 20:53:37 +00:00
Gabor Juhos	428888faec	ar71xx: add support for the built-in WMAC of the AR934x Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26521	2011-04-07 20:53:34 +00:00
Gabor Juhos	13b1bd2ec2	ar71xx: create a separate profile for the Atheros DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26520	2011-04-07 20:53:25 +00:00
Gabor Juhos	72c84e6876	ar71xx: build firmware image for the Atheros DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26519	2011-04-07 20:53:23 +00:00
Gabor Juhos	14b42c44ec	ar71xx: add initial support for the Atheros DB120 board Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26518	2011-04-07 20:53:19 +00:00
Gabor Juhos	f6ae4bf15f	ar71xx: indicate AR934x support in menuconfig Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26517	2011-04-07 20:53:14 +00:00
Gabor Juhos	2b064bb398	ar71xx: add support for the watchdog of the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26516	2011-04-07 20:53:10 +00:00
Gabor Juhos	e4555809c7	ar71xx: enable PCI for the AR934[24] SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26515	2011-04-07 20:53:05 +00:00
Gabor Juhos	4f395745af	ar71xx: enable USB support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26514	2011-04-07 20:53:03 +00:00
Gabor Juhos	25693b4769	ar71xx: enable GPIO support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26513	2011-04-07 20:53:00 +00:00
Gabor Juhos	334a5ec36e	ar71xx: add AR934x specific glue for ar7100_device{start,stop} Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26512	2011-04-07 20:52:57 +00:00
Gabor Juhos	ccd3ebd309	ar71xx: add AR934x specific UART clock initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26511	2011-04-07 20:52:53 +00:00
Gabor Juhos	91470edada	ar71xx: add AR934x specific glue for IRQ initialization Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26510	2011-04-07 20:52:49 +00:00
Gabor Juhos	3b209880bc	ar71xx: add initial support for the AR934x SoCs Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com> SVN-Revision: 26509	2011-04-07 20:52:45 +00:00
Hauke Mehrtens	50c743e79e	kernel: Update to version 2.6.37.6 Thank you Peter Wagner for the patch SVN-Revision: 26441	2011-04-03 13:59:07 +00:00
Felix Fietkau	624526ae11	ar71xx: use DEFAULT:= in the uboot-ar71xx package instead of adding uboot to the profiles, fixes imagebuilder issues SVN-Revision: 26401	2011-04-02 12:43:21 +00:00
Felix Fietkau	98c78c13db	ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection SVN-Revision: 26394	2011-04-02 00:47:33 +00:00
Felix Fietkau	41ee4a283c	ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead SVN-Revision: 26393	2011-04-02 00:47:29 +00:00
Felix Fietkau	acbb3e50e7	ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts SVN-Revision: 26392	2011-04-02 00:47:25 +00:00
Felix Fietkau	335877a2b3	global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance SVN-Revision: 26300	2011-03-26 01:07:12 +00:00
Jo-Philipp Wich	771d6f18f6	fix image generation in the Image Builder environment SVN-Revision: 26271	2011-03-22 18:56:55 +00:00
Imre Kaloz	b8430e7427	update to 2.6.32.33 and 2.6.37.4 SVN-Revision: 26226	2011-03-18 13:25:32 +00:00
Felix Fietkau	5c0daa4580	ar71xx: remove 2.6.32 support SVN-Revision: 26211	2011-03-17 20:08:44 +00:00
Felix Fietkau	784d808d07	ar71xx: add default configuration for the switch on AP96 Enables forwarding of frames between the switch ports (eth0). Patch by Jouni Malinen SVN-Revision: 26180	2011-03-15 19:51:42 +00:00
Hauke Mehrtens	4226f1d373	kernel: update to kernel version 2.6.37.3 SVN-Revision: 26126	2011-03-13 17:14:08 +00:00
Gabor Juhos	8eb616de82	ar71xx: add support for the TP-Link TL-WA901ND v2 board Patch-by: Jonathan Benett <jbscience87@gmail.com> SVN-Revision: 26119	2011-03-13 15:08:31 +00:00
Felix Fietkau	5bddd70a37	Revert "ar71xx: add missing gpio_set_debounce function" - wrong target SVN-Revision: 25854	2011-03-03 16:21:23 +00:00
Felix Fietkau	57a14f4e15	ar71xx: add missing gpio_set_debounce function SVN-Revision: 25848	2011-03-03 10:33:35 +00:00
Felix Fietkau	377898e785	ar71xx: remove support for 2.6.36 SVN-Revision: 25716	2011-02-25 23:26:33 +00:00
Felix Fietkau	4c808e972b	ar71xx: update to 2.6.37.1 SVN-Revision: 25715	2011-02-25 23:25:47 +00:00
Felix Fietkau	bc85dd19bc	ar71xx: revert accidental kernel upgrade SVN-Revision: 25642	2011-02-21 02:42:47 +00:00
Felix Fietkau	9dad83362d	kernel: remove imq support, refresh patches SVN-Revision: 25641	2011-02-21 02:06:51 +00:00
Felix Fietkau	f5cbceb2d5	ar71xx: fix fallout from the 2.6.32 kernel upgrade SVN-Revision: 25595	2011-02-19 20:32:15 +00:00
Florian Fainelli	d3c2b87213	update to 2.6.32.29 SVN-Revision: 25583	2011-02-19 12:44:23 +00:00
Felix Fietkau	9e0b3a1b37	ar71xx: remove vsc73xx ucodes from the default profile - these are only used on some atheros reference designs which are unlikely to have many users SVN-Revision: 25522	2011-02-13 16:08:36 +00:00
Gabor Juhos	256169cbd0	ar71xx: add rtl8366s initvals for the DIR-825 board SVN-Revision: 25121	2011-01-26 20:35:47 +00:00
Gabor Juhos	800fbf32d2	ar71xx: create firmware image for the WNDR3700v2 board Patch-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 25119	2011-01-26 20:35:44 +00:00
Gabor Juhos	67c3e0bf7e	ar71xx: add support for the WNDR3700v2 board Based on a patch by Mark Mentovai <mark@moxienet.com> SVN-Revision: 25118	2011-01-26 20:35:42 +00:00
Jo-Philipp Wich	18ed5bca9b	fix null pointer access in mach-dir-600-a1.c machine setup (#8671 ) SVN-Revision: 25043	2011-01-18 18:04:50 +00:00
Gabor Juhos	0b98f1f64f	ar71xx: rework WNDR3700 image generation SVN-Revision: 24983	2011-01-14 10:37:14 +00:00
Gabor Juhos	b99f5f9c4a	ar71xx: build separate image for the WNDR3700 with NA region SVN-Revision: 24982	2011-01-14 10:37:11 +00:00
Gabor Juhos	b67bbfe287	ar71xx: fix wlan LED on the TL-WR741 board * Patch from #8630 SVN-Revision: 24963	2011-01-11 08:20:47 +00:00
Gabor Juhos	dd53effe15	ar71xx: fix wrong names of the WPS LED/button Reported-by: Nuno Gonçalves SVN-Revision: 24961	2011-01-10 18:15:47 +00:00
Gabor Juhos	a894d10d4d	ar71xx: remove the gpio_wr_fix patch SVN-Revision: 24945	2011-01-09 09:29:51 +00:00
Gabor Juhos	23a6173099	ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver SVN-Revision: 24944	2011-01-09 09:29:45 +00:00
Gabor Juhos	505f0e7a86	ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well SVN-Revision: 24941	2011-01-08 21:04:57 +00:00
Gabor Juhos	271ce88567	ar71xx: add kmod-ledtrig-usbdev to the relevant profiles SVN-Revision: 24940	2011-01-08 21:02:25 +00:00
Gabor Juhos	0de8689b70	ar71xx: use spinlock in ar71xx_device_{start,stop} SVN-Revision: 24929	2011-01-08 11:28:32 +00:00
Gabor Juhos	271bb8385b	ar71xx: add kmod-usb-ohci module for the WNDR3700 profile SVN-Revision: 24927	2011-01-08 10:51:20 +00:00
Gabor Juhos	061228d73c	ar71xx: make uci-default scripts executable Reported-by: Nuno Gonçalves <nunojpg@gmail.com> SVN-Revision: 24897	2011-01-04 13:44:01 +00:00
Gabor Juhos	0f659a13dd	ar71xx: add support for TL-WR740N v1 Same as TL-WR741ND but with different hardware ID and without detachable antenna. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 24811	2010-12-23 12:42:16 +00:00
Claudio Mignanti	2c0596cd69	unifi: add sysupgrade and leds support SVN-Revision: 24737	2010-12-20 17:28:34 +00:00
Felix Fietkau	6acfae9379	ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC Signed-off-by: Alexander Couzens <lynxis@c-base.org> SVN-Revision: 24723	2010-12-19 11:56:42 +00:00
Gabor Juhos	b512523d6f	ar71xx: fix micrel phy patch (Patch from #8041.) SVN-Revision: 24718	2010-12-19 10:05:55 +00:00
Gabor Juhos	cafe08a1b2	ar71xx: remove stray semicolons SVN-Revision: 24651	2010-12-17 17:57:20 +00:00
Gabor Juhos	01c76bf128	ar71xx: fix WLAN LEDs on the DIR-825 board SVN-Revision: 24650	2010-12-17 17:10:21 +00:00
Gabor Juhos	c1d3a23d19	ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards SVN-Revision: 24649	2010-12-17 17:10:19 +00:00
Gabor Juhos	e7ea6387a3	ar71xx: use usbdev trigger for USB LEDs by default SVN-Revision: 24648	2010-12-17 17:10:16 +00:00
Gabor Juhos	8390b7dc9b	ar71xx: UBNT Secondary MAC address duplicate fix There is Secondary MAC address duplicate problem with some UBNT RouterStation and RouterStation Pro HW batches as Primary MAC addresses are not increased by 2 per device in board data. Fix is to use 'Locally Administrated bit' for Secondary MAC address instead of increasing Primary MAC addresses by 1 which could overlap with other device Primary MAC address. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24643	2010-12-17 17:10:01 +00:00
Gabor Juhos	a26c3e60e2	ar71xx: populate LED configuration for WZR-HP-G300NH Signed-off-by: Dave Lichterman <laviddichterman@gmail.com> [nand-disk trigger has been removed - juhosg] SVN-Revision: 24642	2010-12-17 17:09:57 +00:00
Gabor Juhos	a2a5598c00	ar71xx: add wlan led for the TL-WR941ND SVN-Revision: 24612	2010-12-15 19:55:50 +00:00
Gabor Juhos	e421d2575f	ar71xx: UBNT M-Series MAC address fix UBNT M-Series devices have 2 MAC addresses in board data. Fix is to use both entries from board data instead of one entry. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24611	2010-12-15 19:55:47 +00:00
Gabor Juhos	6c1ace2f28	ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards SVN-Revision: 24569	2010-12-14 18:01:04 +00:00
Gabor Juhos	a7750dae90	ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards SVN-Revision: 24568	2010-12-14 18:01:00 +00:00
Hauke Mehrtens	b8ab3d34eb	kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 SVN-Revision: 24486	2010-12-11 16:07:21 +00:00
Gabor Juhos	9f38f9bf76	ar71xx: add missing files for the JA76PF board SVN-Revision: 24444	2010-12-10 19:55:28 +00:00
Gabor Juhos	b680f088ba	ar71xx: add support for the jjPlus JA79PF Patch-by: Cezary Jackiewicz SVN-Revision: 24440	2010-12-10 17:57:51 +00:00
Gabor Juhos	5b0c83edd9	ar71xx: add support for the TP-LINK TL-MR3220 v1 board SVN-Revision: 24439	2010-12-10 17:57:48 +00:00
Gabor Juhos	83834da33b	ar71xx: add default network configuration file for the TL-MR3420 SVN-Revision: 24437	2010-12-10 17:57:40 +00:00
Felix Fietkau	1fa3e7a941	ar71xx: do not throw compile errors if the nbg460n uboot is not selected SVN-Revision: 24426	2010-12-10 16:07:27 +00:00
Gabor Juhos	d9c68341ef	ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well SVN-Revision: 24421	2010-12-10 15:17:08 +00:00
Gabor Juhos	081796fe47	ar71xx: add nbg460n image generation This adds image generation for NBG460N/550N/550NH boards. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> SVN-Revision: 24419	2010-12-10 15:17:03 +00:00
Felix Fietkau	8067f3f3cc	ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues SVN-Revision: 24236	2010-12-04 01:32:15 +00:00
Jo-Philipp Wich	6f7e2d4ce8	tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups SVN-Revision: 24215	2010-12-02 20:19:55 +00:00
Gabor Juhos	79c24b2cb0	ar71xx: refresh patches SVN-Revision: 24210	2010-12-01 18:40:01 +00:00
Jo-Philipp Wich	30b950154b	add a new image for the TEW-652BRP which can be used with the bootloader recovery option SVN-Revision: 24196	2010-11-30 02:04:57 +00:00
Imre Kaloz	ead8ab8403	update to the latest stable kernels SVN-Revision: 24136	2010-11-24 18:50:11 +00:00
Gabor Juhos	9971dfe059	ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage r22700 contained a copy-and-paste error that set eth0's MAC address twice and never set eth1's. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 24036	2010-11-19 07:24:00 +00:00
Gabor Juhos	920a34c0ce	ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23983	2010-11-12 18:52:45 +00:00
Gabor Juhos	3106aea40b	ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23982	2010-11-12 18:52:28 +00:00
Gabor Juhos	30ef7d55fc	ar71xx: use pr_* functions in drivers Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23981	2010-11-12 18:52:12 +00:00
Gabor Juhos	fddf3b8dac	ar71xx: drivers/rb4xx_nand: remove C++ comment usage Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23980	2010-11-12 18:51:55 +00:00
Gabor Juhos	f4d5c885e4	ar71xx: return statements does not need parenthesis Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23979	2010-11-12 18:51:38 +00:00
Gabor Juhos	e244e1c7cd	ar71xx: fix inline attribute location Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23978	2010-11-12 18:51:21 +00:00
Gabor Juhos	acd8ad4de5	ar71xx: wrap long lines (build errors has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23977	2010-11-12 18:51:04 +00:00
Gabor Juhos	eef802855a	ar71xx: fix trailing statements location Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23976	2010-11-12 18:50:47 +00:00
Gabor Juhos	500fac1735	ar71xx: fix whitespaces nits (build error has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23975	2010-11-12 18:50:29 +00:00
Alexandros C. Couloumbis	0c66bb9c55	linux/ar71xx: add preliminary 2.6.37 kernel support SVN-Revision: 23944	2010-11-10 16:23:42 +00:00
Claudio Mignanti	20b2a4417a	Add support for Ubiquiti UniFi AP SVN-Revision: 23904	2010-11-06 21:08:48 +00:00
Felix Fietkau	5f3f1b8cd8	ar71xx: Configure WNDR3700 switch LED colors properly (#8103 ) For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 23879	2010-11-04 18:55:16 +00:00
Felix Fietkau	b3b2227869	Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984 )" on submitter's request SVN-Revision: 23878	2010-11-04 18:53:18 +00:00
Felix Fietkau	77eee74d56	ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984 ) Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 23877	2010-11-04 18:48:22 +00:00
Felix Fietkau	91b6c63adc	ar71xx: Set eth1 MAC address from EEPROM for WNDR3700 The WNDR3700's art/caldata partition contains three MAC addresses at offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1, respectively. The existing code configures eth1's MAC address by adding 1 to eth0's instead of using the value stored in the EEPROM. This patch causes the stored value to be used directly. (On my WNDR3700s, the three stored addresses are all sequential anyway.) Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 23876	2010-11-04 18:46:07 +00:00
Felix Fietkau	fc28e1cd7d	ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai) SVN-Revision: 23875	2010-11-04 18:39:49 +00:00
Imre Kaloz	0a5da348d1	update kernels to 2.6.32.25 and 2.6.35.8 SVN-Revision: 23851	2010-11-04 09:01:08 +00:00
Felix Fietkau	b4e2c09b46	ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues SVN-Revision: 23822	2010-11-03 14:55:53 +00:00
Felix Fietkau	b3e708acd7	ar71xx: remove some unnecessary patches SVN-Revision: 23581	2010-10-22 01:31:47 +00:00
Felix Fietkau	0468a284dd	move a few more 2.6.36 config options from ar71xx to generic SVN-Revision: 23580	2010-10-21 18:42:52 +00:00
Felix Fietkau	f056c054b9	ar71xx: the ar7240 dsa driver is no longer used, remove it. SVN-Revision: 23577	2010-10-21 18:42:28 +00:00
Felix Fietkau	9e2d1a194d	ar71xx: use the new ar7240 switch driver for tl-wa901nd as well SVN-Revision: 23576	2010-10-21 18:42:22 +00:00
Felix Fietkau	6656450c6d	ar71xx: fix more section mismatches SVN-Revision: 23575	2010-10-21 18:42:16 +00:00
Felix Fietkau	8858d90afe	ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32 SVN-Revision: 23574	2010-10-21 18:42:11 +00:00
Felix Fietkau	0ccae6ec9e	ar71xx: refresh kernel config for 2.6.36 SVN-Revision: 23572	2010-10-21 18:41:57 +00:00
Felix Fietkau	d40b0f3529	ar71xx: remove unused kernel versions, 2.6.36 should be the next target SVN-Revision: 23571	2010-10-21 18:41:52 +00:00
Jo-Philipp Wich	a680385396	remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel SVN-Revision: 23451	2010-10-14 23:08:10 +00:00
Felix Fietkau	fc035b3cb6	ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver SVN-Revision: 23439	2010-10-14 13:41:42 +00:00
Felix Fietkau	3941621dbc	ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563 ) SVN-Revision: 23432	2010-10-14 00:14:59 +00:00
Alexandros C. Couloumbis	5717ca5ea9	linux/ar71xx: workaround an rb4xx hard-lock until we get a proper fix. SVN-Revision: 23327	2010-10-08 16:52:35 +00:00
Alexandros C. Couloumbis	dc0e630123	linux/ar71xx: (2.6.36) add a missed patch SVN-Revision: 23319	2010-10-08 12:15:18 +00:00
Alexandros C. Couloumbis	458e8736fc	linux/ar71xx: add preliminary 2.6.36 kernel support (refresh patches) SVN-Revision: 23317	2010-10-08 12:10:18 +00:00
Felix Fietkau	b61a804bf7	ar71xx: increase rb4xx nand kernel partition size (patch by danimo) SVN-Revision: 23293	2010-10-07 14:27:34 +00:00
Imre Kaloz	5f9a6a5431	upgrade kernel versions to the latest stable ones SVN-Revision: 23219	2010-10-04 10:40:41 +00:00
Gabor Juhos	697f5d0bdd	ar71xx: initial support for jjPlus JWAP003 Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) SVN-Revision: 23165	2010-10-01 07:09:29 +00:00
Felix Fietkau	8511c6b16c	AP96: Fix LAN/WAN setup LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> SVN-Revision: 23147	2010-09-28 22:55:14 +00:00
Gabor Juhos	2fdc8aea04	ar71xx: build firmware image for the TL-MR3420 v1 board SVN-Revision: 23138	2010-09-27 14:54:04 +00:00
Gabor Juhos	32d12d5e5c	ar71xx: add support for the TL-MR3420 v1 board SVN-Revision: 23136	2010-09-27 14:53:59 +00:00
Gabor Juhos	b831ebdde9	ar71xx: AR724[12] requires different USB setup SVN-Revision: 23135	2010-09-27 14:53:57 +00:00

... 11 12 13 14 15 ...

2114 Commits