Commit Graph

38825 Commits

Author SHA1 Message Date
Daniel Golle
48d71ab502 kernel: enable CRASH_DUMP on supported platforms
While we have CRASHLOG on MIPS it makes sense to support 'classic'
kexec-based CRASH_DUMP on x86 and arm platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-05-20 00:26:03 +02:00
John Crispin
bad2f9c4dc Revert "ar71xx: Add support for Teltonika RUT900"
This reverts commit 224e5f5efa.

pepe2k pointed out that this was not ready to merge

Signed-off-by: John Crispin <john@phrozen.org>
2017-05-18 15:31:47 +02:00
Michael Lee
eee09bfe01 ramips: support jumbo frame on mt7621 up to 2k
Signed-off-by: Michael Lee <igvtee@gmail.com>
2017-05-18 14:50:16 +02:00
Steffen Weinreich
224e5f5efa ar71xx: Add support for Teltonika RUT900
Teltonika RUT900 is a Router with LTE dual SIM, WiFi, 4x Ethernet
ports, I/O, RS232, RS485, GPS.

The device ist based on a Atheros AR9344 rev 3,

Specifications:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM
- 16 MB of FLASH
- Serial Console header on a Card Board edge connector
- 4x 10/100 Mbps Ethernet (3x LAN, 1x WAN)
- 2.4 GHz Wifi
- 2x external, detachable Wifi antennas
- LTE Modem Huawei ME909u-521 (Also other Modem seen)
- 2x LTE antennas
- 1x GPS antenna
- 7x LED, 1x button
- 1x USB Connector
- 1x Serial RS232
- 1x Serial RS485
- 1x MicroSD Card

The GPL sources of the device are available at www.teltonika.lt/gpl/
and are based on OpenWRT Barrier Breaker (14.07)

Running from tftp:

The Router starts into the uboot Webupdater if the Button ist pressed
more than 3 seconds, if no Network cable is attached it starts the
uboot serial console, from there the router loads the firmware image
via tftpboot from 192.168.1.2:firmware.bin (the router has the
192.168.1.1). With bootm the loaded image will be booted.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>
2017-05-18 14:47:53 +02:00
Daniel Engberg
ec987e59c4 f2fs-tools: Switch to gz tarball
At some point kernel.org decided to drop xz generated tarballs, switch to gz which they still provide.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-18 14:23:26 +02:00
Daniel Golle
5e5499c612 mac80211: rt2x00: remove unneccessary code
Use chanreg and dccal helpers to reduce the size of ePA code.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: fixed white-space so patch applies]
2017-05-18 13:51:28 +02:00
Alexandru Ardelean
ce8bfa9407 lldpd: drop specific respawn params [use system-wide]
I think I added these respawn params [a while back],
when I did the conversion to procd init script format.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-05-18 08:14:26 +02:00
Luiz Angelo Daros de Luca
ccc54b2935 elfutils: bump to 0.169
Removed patches (now upstream):
- 004-maybe-uninitialized.patch
- 007-fix_TEMP_FAILURE_RETRY.patch

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2017-05-18 07:59:56 +02:00
Ben Greear
e00cc98045 ath10k-ct-firmware: Add support for QCA9886/QCA9888 firmware.
This firmware shoul have the same general feature set as the
rest of the 10.4 CT firmware (9984, 9980, etc).  Build-tested
only in LEDE, but firmware has been tested with ath10k-ct driver
on other OSs, so likely works just fine.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2017-05-18 07:59:33 +02:00
Ben Greear
7a343dafbb ath10k-ct-firmware: Update to latest.
The 988x and 9887 firmwares include a bugfix for a case where blockack
did not work sometimes, and many fixes for compiler warnings detected
by newer gcc compilers.

The 9980 and 9984 firmware includes a large backport of upstream QCA
firmware changes to bring it up to date.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2017-05-18 07:59:31 +02:00
Ben Greear
1fc0a45558 ath10k-ct: Update to latest ath10k-ct driver.
Supports disabling firmware hex logging that many found too verbose.

Increase BMI timer so system works more often with 9888 Compex NIC
(and maybe others).

Allow configuring a specific board-file per NIC using fwcfg file.

Maybe fix a scan-busy problem when using CT firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2017-05-18 07:59:26 +02:00
Daniel Engberg
b295966f87 devel/trace-cmd: Update to 2.6.1
Update trace-cmd to version 2.6.1
Switch to tarball download

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-18 07:58:59 +02:00
Giuseppe Lippolis
db776c01e1 comgt-3g: enable modem before to setpin
some modems needs to be enabled with CFUN=1 before to set the pin

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2017-05-18 07:07:00 +02:00
Philip Prindeville
0dcc36fc7d kernel: add hwmon for W83627EHF and family
Remove support for NCT6775/6 from W83627EHF driver so the NCT6775
driver will still be used for those chips.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-05-17 00:06:52 +02:00
Arjen de Korte
070a46121d dnsmasq: add IPv6 nameserver configuration in server mode
When in ra server mode, configure nameservers passed in router
announcements from the dns value (which is already used by odhcpd).

This also fixes FS#677 by using the global IPv6 address of the router
instead of the link local address (if no nameservers are configured).

Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2017-05-16 22:27:02 +02:00
Daniel Engberg
74395d97a9 libs/libnftnl: Update to 1.0.7
Update libnftnl to 1.0.7

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-16 17:22:58 +02:00
Daniel Engberg
89807b627f network/utils/curl: Update to 7.54.0
Update curl to 7.54.0
Update and fresh patches

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-16 16:58:15 +02:00
Daniel Engberg
4b0a2ca9a4 devel/strace: Update to 4.16
Update strace to 4.16
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-16 16:58:11 +02:00
Daniel Engberg
ea2927e1ea network/utils/ipset: Update to 6.32
Update ipset to 6.32

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-16 16:58:07 +02:00
Ansuel Smith
324ec18615 uhttpd: Enable integrated Lua by default
We enabled lua interpreter by default as it doesn't make any problem in the uhttpd config file and we modify the index page to use it.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2017-05-16 16:57:01 +02:00
Bjørn Mork
a131b892ea kernel: add Digi Edgeport USB serial driver package
Signed-off-by: Bjørn Mork <bjorn@mork.no>
2017-05-16 12:10:39 +02:00
Chris Blake
10d11859df ar71xx: add support for Aerohive AP-121
This adds support for Aerohive AP-121 access point.

Specification:
- SoC: Atheros AR9344-BC2A at 560MHz
- WiFi 1: 2.4GHz Atheros AR9340? - SoC
- WiFi 2: 5.0GHz Atheros AR9382-AL1A
- Memory: 128MB from 2x Nanya NT5TU32M16DG-AC
- SPI: 1MB Macronix MX25L8006E
- NAND: 128MB Hynix H27U1G8F2BTR-BC
- Ethernet: Atheros AR8035-A
- USB: 1x 2.0
- TPM: Atmel SC3204

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter
a password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, download and flash LEDE factory image over tftp:

dhcp;
setenv serverip tftp-server-ip;
tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin;
nand erase 0x800000 0x800000;
nand write 0x81000000 0x800000 0x800000;
reset;

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
[minor text changes in commit subject and description, fixed
alphabetical order in etc/diag.sh, use only model name in lib/ar71xx.sh,
fixed code style issues in mach-hiveap-121.c, ubinized factory image]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:58:59 +02:00
Mantas Pucka
cd9d0f9e97 uboot-envtools: add support for 8devices Rambutan
Signed-off-by: Mantas Pucka <mantas@8devices.com>
2017-05-15 22:43:33 +02:00
Mantas Pucka
68b5d34f69 ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

This commit adds basic support for Rambutan development kit

Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header

Flash instructions:
Stock firmware is OpenWrt, so use:
 sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
 tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Mantas Pucka <mantas@8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Ludwig Thomeczek
43a7a1a05e ar71xx: add support for UniFi-AC-Mesh
This adds the build option for the new UniFi AC Mesh.
It is a direct hardware copy from the AC Lite.

- SoC: QCA9563-AL3A (775Mhz)
- RAM: 128MiB
- Flash: 16MiB - dual firmware partitions!
- LAN: 1 1000M - POE
- Wireless:
        2.4G: QCA9563
          5G: UniFi Chip, QCA988X compatible

Thanks to Frank Dietz for testing.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[wrapped too long lines in mach-ubnt-unifiac.c]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Piotr Dymacz
1c56a7929a ar71xx: move Zbtlink ZBT-WE1526 to generic build target
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Steffen Weinreich
e71b2dad94 ramips: add om-watchdog to rut5xx DEVICE_PACKAGES
Add om-watchdog as default package for rut5xx.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>
2017-05-15 22:43:33 +02:00
Steffen Weinreich
04e91631e0 om-watchdog: add support for Teltonika RUT5xx (ramips)
Add rut5xx GPIO PIN selection to om-package startup script.

Testet on a RUT500 device, the timeout value of the hardware watchdog
is about 280 sec.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>
[split into two commits, bump PKG_RELEASE]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Piotr Dymacz
08ab3fda01 om-watchdog: cosmetic code style fixes
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Piotr Dymacz
f7e84a4a2e om-watchdog: cleanup Makefile
Drop redundant Build/Prepare, empty lines and duplicated Build/Compile.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Oldřich Jedlička
f4a97c7f5d ar71xx: fix switch port mapping for ap123 based TP-Link devices
This fixes switch port mapping for: TL-WR841N/ND v8, TL-MR3420 v2 and
TL-WR941N/ND v5. All of them share the same Atheros ap123 reference
design.

The order of switch ports (shown in "swconfig dev eth1 show") is CPU,
LAN 4, LAN 1, LAN 2, LAN 3.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
[included 2 more devices]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00
Hans Dedecker
6d7cb5337e odhcpd: update to git HEAD version
93abe6f config: fix invalid hoplimit in RA message
2ae08d1 config: fix invalid retranstime in RA message
0005cb4 config: fix invalid reachabletime in RA message
5683dd2 config: limit ra_mtu to 65535
f8d40a5 router: fix interface mtu read error
f8f4b87 config: limit ra_retranstime to 60000
a2d8bf6 dhcpv4: display two hex digits per octet in syslog
a9e9bc4 config: make RA retransTime configurable via uci
2cb6b48 config: make RA reachableTime configurable via uci
e4504db config: make RA curHopLimit configurable via uci
9dd5316 config: make RA mtu configurable via UCI
29cb2ff config: fix dhcpv4 server being started
0ef74ec ndp.c: add switch/case fallthrough comments

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-05-15 22:30:39 +02:00
Alberto Bursi
f7fd2abf25 kirkwood: set sata/usb led trigger for NSA3xx
these two devices have a Sata led for each sata port.
These leds must be controlled separately by a special
sata led trigger already used in oxnas target.

Both these devices have a single USB led, and to keep
consistent behaviour with the Sata leds that show
sata activity, this led uses usb-host trigger
to show usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-05-14 21:45:50 +02:00
Alberto Bursi
b52eb549d2 kirkwood: NSA325 remove led triggers from dts
delete useless or unusable default led triggers from dts file.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-05-14 21:45:50 +02:00
Alberto Bursi
4242ddf8f2 base-files: add led functions to uci-defaults.sh
uci_set_leds_ataport() allows to set a led to show activity
on a specific (s)ata port, which is needed for devices that have
a Sata led for each sata port.
The led trigger is from the 834-ledtrig-libata.patch LEDE kernel patch.

uci_set_leds_usbhost() allows to set a led to show total usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Alberto Bursi
b06a286a48 base-files: cleanup led functions in uci-defaults.sh
create a function with code common to all led functions,
create another function with code common to functions setting
a simple led trigger, restore alphabetical order in function names.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Michal Sojka
aa8e91a1e4 image.mk: Generate cpiogz with root-owned files
Some files (e.g. /etc/dropbear) need to be owned by root. Add cpio
option to ensure that.

Other image types (at least targz and squashfs) already have this.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
2017-05-14 21:43:17 +02:00
Jo-Philipp Wich
4a03347545 mac80211: gracefully handle preexisting VIF
Gracefully handle cases where the to-be-created wireless interface already
exists on the system which might commonly happen with non-multi-SSID capable
wireless drivers.

This fixes commit 8301e61365 which caused
previously ignored "Too many open files in system (-23)" errors to fail the
wireless setup procedure.

With the updated approach we'll still try recreating the vif after one
second if the first attempt to do so failed with ENFILE but we will now
consider the operation successfull if a second attempt still yields ENFILE
with the requested ifname already existing on the system.

Fixes FS#664, FS#704.

Suggested-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:43:11 +02:00
Jo-Philipp Wich
37e7a1734f imagebuilder: fix bundling of DTS sources
Refer to LINUX_KARCH instead of ARCH when bundling DTS files in the image
builder tarball.

While we're at it, also dereference symbolic links when copying as some
kernel architectures contain symbolic links in their DTS directories.

This fixes aarch64 imagebuilders such as brcm2708/bcm2710 ones in particular
as the kernel refers to "aarch64" as "arm64" internally.

Ref: https://forum.lede-project.org/t/lede-image-builder-problem/3680

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:43:06 +02:00
Luka Perkov
83e4ed3497 generic: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
2017-05-14 00:34:04 +02:00
Marko Ratkaj
1c7b86d57e mvebu: ClearFog Base fix phy init
Fix Marvell PHYs initialization issues and optimize
logic for page changing during init

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
ee1cee2cac mvebu: add ClearFog Base support
Add support for SolidRun ClearFog Base board.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
f564fcc6bf mvebu: add ClearFog Base device tree files
Add device tree files for Solidrun ClearFog Base board.
We also need to backport some improvements for Armada
388 MicroSoM.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
ec4a8c6dee mvebu: ClearFog renamed upstream to ClearFog Pro
The conventional model is now known as the "Clearfog Pro"

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
efb49af1f9 mvebu: ClearFog DT file renamed upstream
The conventional model is now known as the "Clearfog Pro".
We keep the old armada-388-clearfog.dts file for compatibility reasons.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Matthias Schiffer
1a16cb9c67
mac80211, hostapd: always explicitly set beacon interval
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-13 17:12:54 +02:00
Matthias Schiffer
5e481881d7
hostapd: remove unused variable declarations in hostapd.sh
None of the variables in this "local" declaration are actually set in
wpa_supplicant_add_network().

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-13 16:27:22 +02:00
Kevin Darbyshire-Bryant
deef71375c dnsmasq: bump to 2.77rc3
Fix [FS#766] Intermittent SIGSEGV crash of dnsmasq-full

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-05-12 21:30:56 +02:00
Felix Fietkau
c536c50171 ar71xx: enable nand-utils in the mikrotik subtarget to ensure it makes it to initramfs
Without it, sysupgrade from initramfs to nand fails

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-12 13:29:55 +02:00
Jo-Philipp Wich
e66f17ac1e openvpn: update to v2.4.2
Update to version 2.4.2 in order to address two potential Denial-of-Service
vectors in OpenVPN.

CVE-2017-7478 - Don't assert out on receiving too-large control packets
CVE-2017-7479 - Drop packets instead of assert out if packet id rolls over

Ref: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24#OpenVPN2.4.2
Ref: https://community.openvpn.net/openvpn/wiki/QuarkslabAndCryptographyEngineerAudits

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-12 11:54:48 +02:00