3 Commits

Author	SHA1	Message	Date
Shiji Yang	fb4cea45ec	ramips: convert MT7603 EEPROM to NVMEM format ... This patch converts MT7603 WiFi calibration data to NVMEM format. The EEPROM size is 0x400. Signed-off-by: Shiji Yang <yangshiji66@qq.com>	2023-10-09 11:15:52 +02:00
Joe Mullally	8d25551243	ramips: Apply pinctrl DTS changes to TL-WPA8631P ... Applies changes from 7774b86019 to new device committed later. Fix some whitespace in the DTS. Use standard model name format in DTS. Fixes: 6c743c3006 ("ramips: Add support for TP-Link TL-WPA8631P v3") Signed-off-by: Joe Mullally <jwmullally@gmail.com> Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>	2022-03-13 12:39:58 +09:00
Joe Mullally	6c743c3006	ramips: Add support for TP-Link TL-WPA8631P v3 ... AV1300 Gigabit Passthrough Powerline ac Wi-Fi Extender Specifications -------------- * SoC: MediaTek MT7621AT * CPU: 880 MHz MIPS 1004KEc dual-core CPU * RAM: 64 MiB DDR2 (Zentel A3R12E40DBF-8E) * Flash: 8 MiB SPI NOR (GigaDevice GD25Q64CSIG) * Ethernet: SoC built-in Switch 5x 1GbE * Port 0: PLC (connected through AR8035-A) * Port 1-3: LAN * WLAN: 2x2 2.4GHz 300 Mbps + 2x2 5GHz 867 Mbps (MT7603EN + MT7613BEN) * PLC: HomePlug AV2 (Qualcomm QCA7500) * PLC Flash: 2MiB SPI NOR (GigaDevice GD25Q16CSIG) * Buttons: Reset, LED, Pair, Wi-Fi * LEDs: Power (green), PLC (green/amber), LAN (green), 2.4G (green), 5G (green) * UART: J1 (57600 baud) * Pinout: (3V3) (GND) (RX) (TX) * Visually identify GND from connection to PCB ground plane Installation ------------ Installation is possible from the OEM web interface. Make sure to install the latest OEM firmware first, so that the PLC firmware is at the latest version. However, please first check the OpenWRT Wiki page for confirmation that your OEM firmware version is supported. Signed-off-by: Joe Mullally <jwmullally@gmail.com>	2022-03-06 18:57:33 +01:00