Commit Graph

120 Commits

Author SHA1 Message Date
Jonas Gorski
30a579c674 brcm63xx: move dsl-2640u to dts
Also build image again(?).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44988
2015-03-25 15:35:37 +00:00
Jonas Gorski
16ea19053a brcm63xx: move bcm963268bu_p300 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44987
2015-03-25 15:35:24 +00:00
Jonas Gorski
2d3371cd0f brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
Jonas Gorski
ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
Jonas Gorski
12301a79b7 brcm63xx: fix 6368 cpu1 reg typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
Jonas Gorski
dd618e499f brcm63xx: fix DTS LEDs and buttons
- A4001N/A4001N1: fix swapped green and red LEDs
- CVG834G: add missing LED
- RTA1320: reorder LEDs by GPIO#
- V2500V: add missing LEDs and buttons
- WAP-5813n: fix WPS button (GPIO 35)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44577
2015-02-28 19:59:50 +00:00
Jonas Gorski
b694c45d33 brcm63xx: backport and enable DT spi-gpio no CS support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44570
2015-02-27 23:48:48 +00:00
Jonas Gorski
b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00
Jonas Gorski
eea227c60d brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.

Use aliases for base calculation until we converted all users to
device tree or named gpios.

Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.

While at it, remove the duplicate reset gpio defintion for livebox.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44565
2015-02-27 17:39:49 +00:00
Jonas Gorski
1efb7398e1 brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44564
2015-02-27 17:39:29 +00:00
Jonas Gorski
90c15beee6 brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44563
2015-02-27 17:39:21 +00:00
Jonas Gorski
5a9b7c28c3 brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44562
2015-02-27 17:39:13 +00:00
Jonas Gorski
9a65e1a570 brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44561
2015-02-27 17:39:07 +00:00
Jonas Gorski
f3c071b376 brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44559
2015-02-27 17:38:46 +00:00
Jonas Gorski
bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
2014-12-08 16:11:52 +00:00
Jonas Gorski
3fa17f6d58 brcm63xx: add DT support for USR9108
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43575
2014-12-08 16:11:08 +00:00
Jonas Gorski
218582e8ea brcm63xx: add DT support for F5D7633
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43574
2014-12-08 16:11:03 +00:00
Jonas Gorski
d5f1dd9079 brcm63xx: add DT support for DG834GT/PN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43573
2014-12-08 16:10:54 +00:00
Jonas Gorski
b0ae41f849 brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
Jonas Gorski
84200cf189 brcm63xx: add DT support for DSL-2640B
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43571
2014-12-08 16:10:41 +00:00
Jonas Gorski
929ade0648 brcm63xx: add DT support for CPVA642
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43570
2014-12-08 16:10:17 +00:00
Jonas Gorski
e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
2014-12-01 00:52:07 +00:00
Jonas Gorski
443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
2014-12-01 00:51:56 +00:00
Jonas Gorski
d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
2014-12-01 00:51:53 +00:00
Jonas Gorski
2b46097364 brcm63xx: add DT support for DSL-2650U
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43452
2014-12-01 00:51:17 +00:00
Jonas Gorski
61637aea1b brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43451
2014-12-01 00:51:12 +00:00
Jonas Gorski
53214ca548 brcm63xx: Add DT support for F@ST2504n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43450
2014-12-01 00:51:08 +00:00
Jonas Gorski
40350a5daf brcm63xx: add DT support for F@ST2704V2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43449
2014-12-01 00:51:04 +00:00
Jonas Gorski
3872151ce0 brcm63xx: add DT support for F@ST2604
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43448
2014-12-01 00:50:59 +00:00
Jonas Gorski
5f726ccd79 brcm63xx: add DT support for F@ST2404
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43447
2014-12-01 00:50:56 +00:00
Jonas Gorski
c6fc6b42e1 brcm63xx: Add DT support for SPW303V
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43362
2014-11-24 14:44:33 +00:00
Jonas Gorski
5540ca300e brcm63xx: Add DT support for DV-201AMR
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43361
2014-11-24 14:44:28 +00:00
Jonas Gorski
89000dea4c brcm63xx: Add DT support for RG100A
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43360
2014-11-24 14:44:23 +00:00
Jonas Gorski
13d6fa0081 brcm63xx: Add DT support for A226G/M
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43359
2014-11-24 14:44:19 +00:00
Jonas Gorski
b3ce1c4ea6 brcm63xx: Add DT support for AGPF-S0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43358
2014-11-24 14:44:12 +00:00
Jonas Gorski
57214b00ae brcm63xx: Add DT support for 96368MVWG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42738
2014-10-02 12:26:07 +00:00
Jonas Gorski
477826ef31 brcm63xx: Add DT support for 96368MVNgr
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42737
2014-10-02 12:25:57 +00:00
Jonas Gorski
cdea47cbc3 brcm63xx: Add DT support for 96358VW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42736
2014-10-02 12:25:41 +00:00
Jonas Gorski
80db30b508 brcm63xx: Add DT support for 96358VW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42735
2014-10-02 12:25:36 +00:00
Jonas Gorski
e7ade47fba brcm63xx: Add DT support for 96338W
Renamed of_board_id to convention.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42734
2014-10-02 12:25:27 +00:00
Jonas Gorski
d9194da882 brcm63xx: Add DT support for 96338GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42733
2014-10-02 12:25:22 +00:00
Jonas Gorski
73f576dff2 brcm63xx: Add DT support for 96348R
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42732
2014-10-02 12:25:13 +00:00
Jonas Gorski
35cf1adfc6 brcm63xx: Add DT support for 96348GW-11
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42731
2014-10-02 12:25:07 +00:00
Jonas Gorski
eaee4e3eb7 brcm63xx: Add DT support for 96348GW-10
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42730
2014-10-02 12:25:01 +00:00
Jonas Gorski
73d59ed675 brcm63xx: Add DT support for 96348GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42729
2014-10-02 12:24:39 +00:00
Jonas Gorski
99ecfbf702 brcm63xx: Add DT support for 96345GW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42728
2014-10-02 12:24:34 +00:00
Jonas Gorski
a950e2fce8 brcm63xx: Add DT support for 963281TAN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42727
2014-10-02 12:24:29 +00:00
Jonas Gorski
51e1f1476f brcm63xx: Add DT support for P870HW-51a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42248
2014-08-21 11:28:59 +00:00
Jonas Gorski
b339304425 brcm63xx: Add DT support for HG553
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix linux partition length]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42247
2014-08-21 11:28:54 +00:00
Jonas Gorski
2f09960e46 brcm63xx: Add DT support for HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42246
2014-08-21 11:28:46 +00:00
Jonas Gorski
7bc83fdd13 brcm63xx: Add DT support for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42245
2014-08-21 11:28:43 +00:00
Jonas Gorski
a180c80f23 brcm63xx: Add DT support for A4001N1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42244
2014-08-21 11:28:40 +00:00
Jonas Gorski
83651bad85 brcm63xx: Add DT support for WAP-5813n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42243
2014-08-21 11:28:37 +00:00
Jonas Gorski
7b2d74a156 brcm63xx: Add DT support for VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42242
2014-08-21 11:28:34 +00:00
Jonas Gorski
42bbf7bcb3 brcm63xx: Add DT support for VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42241
2014-08-21 11:28:32 +00:00
Jonas Gorski
2936cacdfc brcm63xx: Add DT support for AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42240
2014-08-21 11:28:28 +00:00
Jonas Gorski
b97aa0b4fd brcm63xx: Add DT support for AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42239
2014-08-21 11:28:18 +00:00
Jonas Gorski
1891b08f00 brcm63xx: Add DT support for CT-6373
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42238
2014-08-21 11:28:14 +00:00
Jonas Gorski
e490cc7e14 brcm63xx: Add DT support for CT-5365
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42237
2014-08-21 11:28:10 +00:00
Jonas Gorski
e46d57b3af brcm63xx: use DT for partitions on SPW500V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42236
2014-08-21 11:28:01 +00:00
Jonas Gorski
84001352fd brcm63xx: dts: fix spelling of "bank-width"
Fixes pflash registration through DT for 6338/6345/6348.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42235
2014-08-21 11:27:56 +00:00
Jonas Gorski
33e2a51d4d brcm63xx: dsl-274xb-c: linux partition should not be read-only
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42234
2014-08-21 11:27:44 +00:00
Jonas Gorski
29e4d82dbb brcm63xx: fix HG556a boards and remove fallback board
This changes board info to match the Wiki
http://wiki.openwrt.org/toh/huawei/hg556a, removes the no longer needed
fallback board and fixes HG556 Ralink eeprom extraction.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: rename partitions instead]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42206
2014-08-18 21:50:29 +00:00
Jonas Gorski
74ec41ef59 brcm63xx: use dtb board detection for neufbox 4
This splits up neufbox 4 for now into two images, one for each OEM.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42128
2014-08-11 11:37:21 +00:00
Jonas Gorski
862f7fccb0 brcm63xx: use dtb board detection for NB6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42127
2014-08-11 11:37:17 +00:00
Jonas Gorski
52b0935efe brcm63xx: use dtb board detection for HW556
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42126
2014-08-11 11:37:14 +00:00
Jonas Gorski
0aa242fe20 brcm63xx: replace CFEFIXUP usage with dtb based detection
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
Jonas Gorski
f22bab1017 brcm63xx: move bcm96328avng to dtb detection
Use appended dtb for board detection for bcm96328avng.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42124
2014-08-11 11:37:04 +00:00
Jonas Gorski
9c6287d6a1 brcm63xx: add support for registering parallel flash through dtb
Add the required nodes to the dtsi files and code to prevent double
registration from the board support code.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42123
2014-08-11 11:37:01 +00:00
Jonas Gorski
0343c0288e brcm63xx: add empty dtsi files for each of the supported SoCs
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42120
2014-08-11 11:36:53 +00:00