Commit Graph

7 Commits

Author SHA1 Message Date
Rafał Miłecki
36bab9266f bcm4908: enable & setup packet steering
Without packet steering NAT masquarade speed on BCM4908 /jumps/ between
two speeds:
1. 826 Mb/s (±3 Mb/s)
2. 909 Mb/s (±8 Mb/s)
and it never reaches ~940 Mb/s.

Proper packet steering can improve it. Below are testing results for
running iperf TCP traffic from LAN to WAN. They were used to pick up
golden values.

┌──────────┬──────────┬───────────┐
│   eth0   │  br-lan  │   speed   │
│ rps_cpus │ rps_cpus │   [Mbps]  │
├──────────┼──────────┼───────────┤
│        0 │        0 │ 743 / 804 │
│        0 │        1 │ 738 / 821 │
│        0 │        2 │     ✓ 940 │
│        0 │        4 │     ✓ 938 │
│        0 │        8 │     ✓ 941 │
├──────────┼──────────┼───────────┤
│        1 │        0 │       829 │
│        1 │        1 │       829 │
│        1 │        2 │     ✓ 942 │
│        1 │        4 │     ✓ 941 │
│        1 │        8 │     ✓ 941 │
├──────────┼──────────┼───────────┤
│        2 │        0 │     ✓ 942 │
│        2 │        1 │       926 │
│        2 │        2 │     ✓ 942 │
│        2 │        4 │     ✓ 942 │
│        2 │        8 │     ✓ 941 │
├──────────┼──────────┼───────────┤
│        4 │        0 │     ✓ 941 │
│        4 │        1 │       925 │
│        4 │        2 │     ✓ 941 │
│        4 │        4 │     ✓ 941 │
│        4 │        8 │     ✓ 941 │
├──────────┼──────────┼───────────┤
│        8 │        0 │     ✓ 942 │
│        8 │        1 │       925 │
│        8 │        2 │     ✓ 941 │
│        8 │        4 │     ✓ 942 │
│        8 │        8 │     ✓ 942 │
└──────────┴──────────┴───────────┘

Ref: fcbd39689e ("bcm53xx: enable & setup packet steering")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 57cad53f4e)
2022-09-02 12:24:19 +02:00
Rafał Miłecki
13c9f1f37d bcm4908: support "rootfs_data" on U-Boot devices
1. Create "rootfs_data" dynamicaly

U-Boot firmware images can contain only 2 UBI volumes: bootfs (container
with U-Boot + kernel + DTBs) and rootfs (e.g. squashfs). There is no way
to include "rootfs_data" UBI volume or make firmware file tell U-Boot to
create one.

For that reason "rootfs_data" needs to be created dynamically. Use
preinit script to handle that. Fire it right before "mount_root" one.

2. Relate "rootfs_data" to flashed firmware

As already explained flashing new firmware with U-Boot will do nothing
to the "rootfs_data". It could result in new firmware reusing old
"rootfs_data" overlay UBI volume and its file. Users expect a clean
state after flashing firmware (even if flashing the same one).

Solve that by reading flash counter of running firmware and storing it
in "rootfs_data" UBI volume. Every mismatch will result in wiping old
data.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 93259e8ca2)
2022-03-07 14:48:02 +01:00
Rafał Miłecki
608c7dccf2 bcm4908: sysupgrade: add pkgtb format support
BCM4908 devices with U-Boot use pkgtb firmware format. It's based on
U-Boot's FIT: DTB with configurations, images & embedded data.

This format contains bootfs, rootfs and optionally a first stage U-Boot
loader. Contained images need to be extracted & flashed.

Broadcom used two sets of firmwares: main & backup. It uses UBI volumes
"metadata1" & "metadata2" for storing U-Boot env variables with info
about flashed images.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 5f05795aa7)
2022-01-03 14:28:13 +01:00
Rafał Miłecki
6292d1e354 bcm4908: sysupgrade: refactor handling different firmware formats
This results in setting format specific data (format info, extract
commands) in a single function. It should help maintaining sysupgrade
code.

This change has been tested on Asus GT-AC5300 and Netgear R8000P.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 30b168b9b8)
2022-01-03 14:00:34 +01:00
Sungbo Eo
4607f55439 bcm4908: fix calculation of new cferam index
The arithmetic expansion fails when idx becomes a two digit number.
Fix this by relying on expr command.

root@OpenWrt:/# echo $(((028 + 0) % 1000))
/bin/ash: arithmetic syntax error
root@OpenWrt:/# echo $(($(expr 028 + 0) % 1000))
28

Fixes: a6a0b252ba ("bcm4908: add sysupgrade support")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit f432353850)
2021-11-05 14:13:46 +01:00
Rafał Miłecki
a5d457a0f4 bcm4908: add sysupgrade support
It supports flashing OpenWrt images (bootfs & UBI upgrade) as well as
vendor images (whole MTD partition write).

Upgrading cferom is unsupported. It requires copying device specific
data (like MAC) to target image before flashing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a6a0b252ba)
2021-04-08 13:16:13 +02:00
Rafał Miłecki
f06c3031a7 bcm4908: add board.d network setup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-02-08 12:05:56 +01:00