Commit Graph

2886 Commits

Author SHA1 Message Date
Felix Fietkau
7450698957 imx6: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7f0796d874 imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
348fedc1a6 imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c524d1b256 imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Rafał Miłecki
188626f17c mac80211: backport cfg80211 support for ieee80211-freq-limit DT property
This property allows specifying extra limits for wireless device in DT.
For a full documentation see upstream commit b330b25eaabd ("dt-bindings:
document common IEEE 802.11 frequency limit property").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-06 15:52:55 +01:00
Felix Fietkau
e3072599f6 ath9k: don't run periodic and nf calibration at the same time
Might fix some stability issues on older chips

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Felix Fietkau
84bd74057f build: use mkhash to replace various quirky md5sum/openssl calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Stijn Tintel
ed69e93262 kernel/modules: add SSSE3 SHA512 module
This module is optimized for SSSE3/AVX/AVX2.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Stijn Tintel
86de53203e kernel/modules: add SSSE3 SHA256 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Stijn Tintel
159e82d0db kernel/modules: add SSSE3 SHA1 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Felix Fietkau
c296ba834d Revert "ath9k: Add airtime fairness scheduler"
This reverts commit 528f46d082.
After this commit, several users reported stability issues. Revert it
now so it doesn't cause issues for the upcoming release

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-04 01:13:58 +01:00
Stijn Tintel
b13e103d71 ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-03 20:53:48 +01:00
Alexis Green
fd718c5025 mac80211: Allow HT/VHT rates when running unencrypted mesh.
Signed-off-by: Alexis Green <agreen@cococorp.com>
2017-01-02 16:47:59 +01:00
George Amanakis
5639e45614 generic: package Broadcom BNX2 driver
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.

Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
2017-01-02 16:47:59 +01:00
Felix Fietkau
c9c68c7177 ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 20:55:35 +01:00
Felix Fietkau
f04b651453 ath5k: drop bogus warning on drv_set_key with unsupported cipher (FS#334)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Felix Fietkau
00ad43f047 ath9k: remove old rx dma stop check optimization
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Gabe Rodriguez
94030e86d5 mwlwifi: Update to latest source
-MAC register revisions for 8864 firmware

Tested on WRT1900ACv1 (mvebu). No regressions

Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
2016-12-26 11:17:33 +01:00
Felix Fietkau
d109d03198 kernel: split kmod-lib-zlib into two packages to keep it in sync with kernel dependencies
Fixes build error on default config + selecting kmod-fs-isofs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-26 11:11:49 +01:00
Hauke Mehrtens
4af4f21492 ltq-vmmc: mark VOICE_CPE_VMMC_PMC as broken
We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The
vmmc driver will not compile with this option activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 18:43:55 +01:00
Hauke Mehrtens
9c49c937ab kmod-sched-cake: do not build on kernel 3.18
kmod-sched-cake does not build on kernel 3.18, so add the dependency to
not even try.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 15:15:55 +01:00
Felix Fietkau
236bf83bb6 brcmfmac: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 12:10:37 +01:00
Felix Fietkau
0d5ba94088 orion: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
9a1f441ac8 kirkwood: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Florian Fainelli
8bf69ee78c kernel: Add kmod-ethoc
Add the kernel module package for the Opencores.org Ethernet MAC,
depends on PHYLIB.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 06:55:19 +01:00
Felix Fietkau
c7c1cf5618 treewide: clean up and unify PKG_VERSION for git based downloads
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:21 +01:00
Gabe Rodriguez
24e58c3f72 mwlwifi: Update to latest source
- Source updated to fix noise level, DTS
- Added support for BB and RF

Tested working on WRT1900ACv1 (mamba) kernel 4.4.38. No regressions found.

Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mirror hash]
2016-12-22 16:42:20 +01:00
Toke Høiland-Jørgensen
528f46d082 ath9k: Add airtime fairness scheduler
This adds a patch that introduces airtime fairness scheduling to ath9k,
which can significantly improve network efficiency in mixed-rate
environments.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:19 +01:00
Andy Strohman
7acb7dc3db ath10k-ct: Enable DFS when "Enable DFS support" is set for kmod-ath
This allows users of this package to configure DFS channels.
It mimics the behaviour of the ath10k module included in
package mac80211

Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
2016-12-20 16:24:22 +01:00
Felix Fietkau
4344eb62bf mwlwifi: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:22 +01:00
Felix Fietkau
2d4c42ad49 mt76: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:22 +01:00
Alexis Green
84daeb2e14 ath10k-ct: ath10k-ct specifies that it supports 802.11ac mode
Signed-off-by: Alexis Green <agreen@cococorp.com>
2016-12-20 16:24:22 +01:00
Alexis Green
8f3d8c0022 mac80211: ath10k specifies that it supports 802.11ac mode
Signed-off-by: Alexis Green <agreen@cococorp.com>
2016-12-20 16:24:22 +01:00
Kevin Darbyshire-Bryant
4e1f7ad56e kmod-sched-cake: diffserv3 & change defaults
Follow upstream cake:

diffserv3: a simple 3 tin classifier more in line with sqm-scripts
defaults for other qdisc algorithms.

defaults: default qdisc options are now diffserv3 and triple-isolate.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-12-20 09:35:36 +01:00
Tomasz Maciej Nowak
6b08a47263 kernel: add support for Option Fusion+ PCMCIA card
New package kmod-pcmcia-nozomi to suppot Option Fusion+ HSDPA PCMCIA
modem.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2016-12-20 09:35:36 +01:00
Tomasz Maciej Nowak
d2da2c2cb3 kernel: add support for PD6729 PCMCIA bridge
New package kmod-pcmcia-pd6729 to support Cirrus Logic PD6729
PCI-to-PCMCIA bridge.

Signen-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2016-12-20 09:35:36 +01:00
Tomasz Maciej Nowak
676a11d710 kernel: enable CONFIG_PCMCIA_LOAD_CIS
Allow to load .cis firmware updates from userspace. Some of PCMCIA cards
need to update Card Information Structure (CIS) to work properly.

Signen-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2016-12-20 09:35:36 +01:00
Tomasz Maciej Nowak
87bc410f7c kernel: declare AddDepends in pcmcia.mk
Stack repeated definitions to easy further additions.

Signen-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2016-12-20 09:35:36 +01:00
Tomasz Maciej Nowak
a7cacc9735 kernel: don't load pcmcia_rsrc in kmod-pcmcia-yenta
Kmod-pcmcia-yenta already depends on kmod-pcmcia-rsrc so there is no
need to load it second time.

Signen-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2016-12-20 09:35:36 +01:00
Felix Fietkau
a032940bfb Revert "ath9k: Add airtime fairness scheduler"
Accidentally pushed to the wrong branch

This reverts commit 47bc081e76.
2016-12-19 14:08:02 +01:00
Toke Høiland-Jørgensen
47bc081e76 ath9k: Add airtime fairness scheduler
This adds a patch that introduces airtime fairness scheduling to ath9k,
which can significantly improve network efficiency in mixed-rate
environments.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-19 13:59:32 +01:00
Christian Lamparter
b3a871dd3d mac80211: backport "cfg80211: limit scan results cache size"
The patch commit states:
"It's possible to make scanning consume almost arbitrary amounts
of memory, e.g. by sending beacon frames with random BSSIDs at
high rates while somebody is scanning.

Limit the number of BSS table entries we're willing to cache to
1000, limiting maximum memory usage to maybe 4-5MB, but lower
in practice - that would be the case for having both full-sized
beacon and probe response frames for each entry; this seems not
possible in practice, so a limit of 1000 entries will likely be
closer to 0.5 MB."

Signed-off-by: Johannes Berg <johannes.berg@intel.com>"

This patch was added in 4.4.36. But because LEDE backports
cfg80211, mac80211 and the wifi drivers separately, it needs
to be added manually for now. It can be dropped later as it
will be part of the next mac80211 refresh.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2016-12-19 13:51:21 +01:00
Felix Fietkau
00bc7f0357 mac80211: merge a number of minstrel/minstrel_ht performance and memory usage improvements
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-19 13:51:21 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Ben Greear
4921760a45 ath10k-ct: Update to latest CT ath10k driver.
This works around deadlock and/or memory corruption during
firmware crash and improves ability to configure number of
tids in firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-12-16 22:37:59 +01:00
Felix Fietkau
3a1e3b4e0d package/kernel/linux: only access kernel config if DUMP is unset
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 14:44:08 +01:00
Felix Fietkau
fb237477fd mt76: update to the latest version, fixes a build error on some platforms
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-15 13:02:31 +01:00
Jo-Philipp Wich
3494ca66c5 linux: do not autoload sdhci.ko as sdhci-pltfm.ko already depends on it
Currently, installing kmod-sdhci fails with "sdhci is already loaded" since
"sdhci.ko" is inserted explicitely first, the implicitely loaded again when
"sdhci-pltfm.ko" is inserted as the latter depends on the former.

Remove the explicit autoprobe of "sdhci.ko" to fix the postinstall script.

Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:41:21 +01:00
Felix Fietkau
970dd4dd58 kernel: netfilter: split out iptable_raw into a separate package
This will avoid loading it in the default configuration, which reduces
image size a bit, and (more importantly) improves performance by
avoiding some unnecessary netfilter hooks

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-14 12:13:14 +01:00
Felix Fietkau
28f6951600 ath10k: fix a soft-lockup on firmware restart
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-14 12:13:13 +01:00
Felix Fietkau
7dcccacb98 ath10k: fix a bug on sending null-func frames
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-14 12:04:52 +01:00
Alberto Bursi
1e15d92de1 kernel: add a missing submenu
this kernel module currently does not set submenu.
Fix this by adding it to the "Others" submenu

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-12-14 11:05:41 +01:00
Hauke Mehrtens
a6781ef4c1 kernel: kmod-hwmon-tmp102: add dependency to kmod-thermal
Depend on the kmod-thermal package when it is activated, this fixes
compile problems on some targets.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-14 00:15:33 +01:00
Felix Fietkau
66482e179b ath10k: fix DMA allocation issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-13 12:44:57 +01:00
Felix Fietkau
57f7f91f0c mac80211: refresh all patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-13 12:34:13 +01:00
Felix Fietkau
4872c36c55 ath9k: add a RCU related bugfix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-13 12:34:12 +01:00
Kevin Darbyshire-Bryant
1f0ff783f0 kmod-sched-cake: update & restore DSCP washing
Track upstream changes, incl changes in packet overhead accounting
(automatically taking care of linux' packet sizing knowledge),
improvements to triple isolated DRR handling (new flow dominance),
statistics tweak & allow more packet drops in stressed conditions.

Under tests this has significantly improved latency control under
'many flows to one' scenarious as is typical of bittorrent and MS
Windows update.

I also restored 'DSCP washing' functionality in my repo which follows
upstream closely (like a hawk!) with tc keywords 'wash/nowash'.  This
allows cake to limit/control packets in bands determined by a packet's
DSCP but to clear those DSCP bits on qdisc egress.  This functionality
was originally removed as part of an attempt to push cake into the
kernel, which hasn't actually happened as yet.

A matching commit is required to iproute2/tc to support the new overhead
handling, keyword changes as well as the 'wash/nowash' tweak.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-12-12 16:42:06 +01:00
Felix Fietkau
b305b8c386 mt76: update to the latest version, fixes dfs issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:54:47 +01:00
Hauke Mehrtens
4dbdba36f8 kernel: add TI tmp102 and tmp103 temperature sensors
This just adds the kmods for these kernel modules.
This is found on some Lantiq / Intel reference boards.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-10 16:06:40 +01:00
Álvaro Fernández Rojas
4257f6548b brcm2708-gpu-fw: update to latest version
Also switches hases to SHA256

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-12-04 12:32:02 +01:00
Florian Fainelli
5763e438f6 kernel: add kernel package for the rs5c372a rtc module
This RTC is used on the Buffalo Terastation Pro II/Live devices.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:51 +01:00
Felix Fietkau
f2010b0929 rtc-rv5c386a: fix include path for bcm47xx_nvram.h
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-30 12:47:25 +01:00
Martin Blumenstingl
448b9b67e1 kernel: mac80211: disable ath9k bands via device tree
These properties allow overriding the settings from the EEPROM
which indicate whether a band is enabled or not.
Setting this property is only needed when the RF circuit does not
support the 2.4GHz or 5GHz band while it is enabled nevertheless in the
EEPROM.

These patches will be replaced with a future upstream version which
will introduces an ieee80211 device tree property to disable bands.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-11-29 21:40:16 +01:00
Martin Blumenstingl
3f889418a5 kernel: mac80211: add pending ath9k EEPROM swapping patches
There are two types of swapping the EEPROM data in the ath9k driver.
Before this series one type of swapping could not be used without the
other.

The first type of swapping looks at the "magic bytes" at the start of
the EEPROM data and performs swab16 on the EEPROM contents if needed.
The second type of swapping is EEPROM format specific and swaps
specific fields within the EEPROM itself (swab16, swab32 - depends on
the EEPROM format).

With this series the second part now looks at the EEPMISC register
inside the EEPROM, which uses a bit to indicate if the EEPROM data
is Big Endian (this is also done by the FreeBSD kernel).
This has a nice advantage: currently there are some out-of-tree hacks
(in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a
Big Endian system (= no swab16 is performed) but the EEPROM itself
indicates that it's data is Little Endian. Until now the out-of-tree
code simply did a swab16 before passing the data to ath9k, so ath9k
first did the swab16 - this also enabled the format specific swapping.
These out-of-tree hacks are still working with the new logic, but it
is recommended to remove them. This implementation is based on a
discussion with Arnd Bergmann who raised concerns about the
robustness and portability of the swapping logic in the original OF
support patch review, see [0].

After a second round of patches (= v1 of this series) neither Arnd
Bergmann nor I were really happy with the complexity of the EEPROM
swapping logic. Based on a discussion (see [1] and [2]) we decided
that ath9k should use a defined format (specifying the endianness
of the data - I went with __le16 and __le32) when accessing the
EEPROM fields. A benefit of this is that we enable the EEPMISC based
swapping logic by default, just like the FreeBSD driver, see [3]. On
the devices which I have tested (see below) ath9k now works without
having to specify the "endian_check" field in ath9k_platform_data (or
a similar logic which could provide this via devicetree) as ath9k now
detects the endianness automatically. Only EEPROMs which are mangled
by some out-of-tree code still need the endian_check flag (or one can
simply remove that mangling from the out-of-tree code).

[0] http://www.spinics.net/lists/linux-wireless/msg152634.html
[1] https://marc.info/?l=linux-wireless&m=147250597503174&w=2
[2] https://marc.info/?l=linux-wireless&m=147254388611344&w=2
[3] 50719b56d9/sys/dev/ath/ath_hal/ah_eeprom_9287.c (L351)

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-11-29 21:40:16 +01:00
Martin Blumenstingl
1847248fc1 kernel: mac80211: backport ath9k device tree support patches
These patches add support for configuring ath9k based devices via
devicetree. This was tested on PCI(e) based devices. This should work
for AHB based devices as well (adding more AHB specific properties may
still be needed) as soon as the ath79 platform is ready to populate the
ath9k wmac via devicetree.
This patchset was accepted upstream, more information can be found on
the linux-wireless list:
https://www.spinics.net/lists/linux-wireless/msg155474.html

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-11-29 21:40:16 +01:00
Stijn Tintel
9f109876ea kernel: have kmod-ipsec depend on kmod-crypto-echainiv
The ESP algorithms in CBC mode require echainiv, so have kmod-ipsec
depend on kmod-crypto-echainiv.

See upstream commit 32b6170ca59ccf07d0e394561e54b2cd9726038c.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-11-29 12:19:22 +01:00
Mathias Kresin
57d36e5bdd ltq-hcd: drop package
Since ffd7c15500 it isn't used anymore on
any supported target.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
d561b2f5ce gpio-button-hotplug: add more buttons
The keycodes are used by some boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Avi H. D
bbdb20f649 kernel: fix typo in input-gpio-encoder package title
Line 115, 'rotary' was misspelled as 'rotay'

Signed off by: Avinash Duduskar <strykar@hotmail.com>
2016-11-26 22:00:30 +01:00
Felix Fietkau
23a55102df kernel: remove another redundant KCONFIG entry in virt.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:41:10 +01:00
Felix Fietkau
d5c3a7b1ab kernel: fix virtualization kmod dependencies and kconfig symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:29:05 +01:00
Felix Fietkau
e57bed5bc3 kernel: remove kmod-vhost_net, fixes build breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-24 13:26:04 +01:00
Yousong Zhou
d206dfdf35 package: add kernel packages for kvm virtualization
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-11-24 12:53:18 +01:00
Ben Greear
f94bee8c02 ath10k-ct: Update to latest.
Fixes locking issue, quietens some potential message floods.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-11-22 10:50:51 +01:00
Vitaly Chekryzhev
4545a60edb kernel/modules: add kmod-switch-rtl8367b
Add build option for RTL8367R/VB switches.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2016-11-17 20:01:21 +01:00
dpeddi
4649a92901 lantiq: disable VMMC_COEF for non FALCON device
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-16 10:57:48 +01:00
Alexey Brodkin
84d57fc485 mac80211: Make wlcore platform-independent
TI wl18xx and wl12xx are Wi-Fi/Bluetooth combo modules
that could be found on different existing boards.

But it is possible to get those modules as a separate
component and use with existing boards as well as
new boards equipped with either module may appear so we
remove dependency on OMAP instead we add dependency on MMC
because this Wi-Fi module uses SDIO interface.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-16 10:54:33 +01:00
Matthias Schiffer
fa845e9978
ath9k: add support for the HSR tuner of the Ubiquiti UAP Outdoor+
Without setting the HSR to the selected channel, the WLAN of the UAP
Outdoor+ will exhibit high packet loss in RX.

Based-on-patch-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-15 18:54:06 +01:00
Matthias Schiffer
a250556d27
ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on success
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-15 18:54:05 +01:00
Mathias Kresin
b6832817eb mac80211: rt2x00: add support for mac addr from device tree
Backport upstream accepted patch which allows to override the EEPROM
mac address with one from device tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
e7c019c24d mac80211: rt2x00: fold patches
The patch 615-rt2x00-fix_20mhz_clk.patch fixes code introduced by
611-rt2x00-rf_vals-rt3352-xtal20.patch and makes the the platform data
property clk_is_20mhz obsolete.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Felix Fietkau
36cccbb283 kernel: select kmod-phy-bcm-ns-usb* from kmod-usb* for bcm53xx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-08 14:25:07 +01:00
Mathias Kresin
4f7a0601e6 mac80211: rt2x00: add mtd-eeprom swab function
Most of the lantiq devices with ralink wifi have the EEPROM stored
in big endian byte order in flash, but the driver expects the EEPROM to
be in little endian.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:11 +01:00
Mathias Kresin
7f235df571 mac80211: rt2x00: remove eeprom filename dependency from mtd-eeprom
The ralink,mtd-eeprom device tree property doesn't require the
ralink,eeprom property to work.

Rework the error handling and user notification as well. Do not log an
error if the mtd-eeprom parameter isn't used. It could be intentional
and should not scare the user.

Check if the number of bytes read from the mtd devices matches the
requested number of bytes.

In case of an mtd read error, give a hint to the user which partition
was tried to read from.

In case everything is fine, notify the user as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:10 +01:00
Mathias Kresin
2516c0572e mac80211: rt2x00: improve eeprom_file property handling
Call the rt2x00lib_get_eeprom_file_name only once and from the function
where the EEPROM filename is required.

Error only out if an EEPROM file is mandatory. Use the
REQUIRE_EEPROM_FILE bit to determine if it is mandatory.

Do not set the REQUIRE_EEPROM_FILE bit while requesting an EEPROM file.
It should be (and is) set before requesting an EEPROM file.

Do not redirect users to upstream while using a function of a custom
patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-08 11:17:10 +01:00
Florian Larysch
dfc14bd145 kernel: add kernel module package for the DS1374 RTC
Package the driver for the DS1374 chip present on the T4240RDB.

Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix missing symbol]
2016-11-08 10:49:40 +01:00
Florian Larysch
51b1d76f16 kernel: package module for the W83793 hwmon chips
Package the driver for the W83793 hwmon chip present on the T4240RDB.

Signed-off-by: Florian Larysch <fl@n621.de>
2016-11-08 05:49:58 +01:00
Mathias Kresin
578f7b9c59 kernel: fix kmod-sound-core build error
Fix build error introduced with 2ab6aac.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-05 22:24:25 +01:00
Dmitry Sutyagin
2ab6aaca4d kernel: add SND_PCM_TIMER to kmod-sound-core
FS#256

Fix audio not working due to unset SND_PCM_TIMER. CONFIG_SND_PCM_TIMER
is required for ALSA to work (at least for some audio devices),
otherwise applications using sound may fail. Can be reproduced by
installing "alsa-utils-tests" and running "speaker-test":

...
ALSA lib pcm_direct.c:1159:(snd1_pcm_direct_initialize_poll_fd) unable to open timer 'hw:CLASS=3,SCLASS=0,CARD=0,DEV=0,SUBDEV=0'
ALSA lib pcm_dmix.c:1106:(snd_pcm_dmix_open) unable to initialize poll_fd
Playback open error: -19,No such device

The kernel size does not increase, only the size of the kernel module
increases.

Signed-off-by: Dmitry Sutyagin <f3flight@gmail.com>
2016-11-05 22:03:42 +01:00
Felix Fietkau
fb504e8799 Revert "mt76: update to the latest version, adds a tx queue configuration fix"
This reverts commit 32867540ea.
A report indicates that this causes a tx/rx throughput regression

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-05 10:16:53 +01:00
Felix Fietkau
17ecd879b8 Revert "mwl8k: remove synchronous device init hack"
This reverts commit cb037d1842.
See 6aa07b8202 for more information

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 13:23:07 +01:00
Felix Fietkau
6aa07b8202 Revert "mac80211: remove ath10k delayed initialization hack"
This reverts commit efd9dec319.

ath10k can take a long time to probe, long enough for netifd to fail to
initialize already configured wireless devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 12:58:52 +01:00
Felix Fietkau
32867540ea mt76: update to the latest version, adds a tx queue configuration fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 10:32:51 +01:00
Felix Fietkau
cae688544d mac80211: fix A-MSDU tx aggregation (FS#174)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 10:32:05 +01:00
Felix Fietkau
db82db3203 mac80211: minor cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 10:31:42 +01:00
Felix Fietkau
5c11a4b311 mac80211: fix a tx A-MPDU aggregation issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-04 10:31:27 +01:00
Felix Fietkau
12bd0f2820 mac80211: replace the previous fix with a revert of the faulty upstream commit
This avoids potential breakage in rt2x00usb

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 12:13:50 +01:00
Felix Fietkau
cb037d1842 mwl8k: remove synchronous device init hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:08:01 +01:00
Mathias Kresin
efd9dec319 mac80211: remove ath10k delayed initialization hack
LEDE no longer requires all PHYs to be initialized to
create the configuration files during bootup. This patch
removes the now obsolete ath10k patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-03 11:08:01 +01:00
Christian Lamparter
5f8f8a3661 base-files, mac80211, broadcom-wl: wifi detection and configuration
Currently, the wifi detection script is executed as part of
the (early) boot process. Pluggable wifi USB devices, which
are inserted at a later time are not automatically
detected and therefore they don't show up in LuCI.

A user has to deal with wifi detection manually, or restart
the router.

However, the current "sleep 1" window - which the boot
process waits for wifi devices to "settle down" - is too
short to detect wifi devices for some routers anyway.

For example, this can happen with USB WLAN devices on the
WNDR4700. This is because the usb controller needs to load
its firmware from UBI and initialize, before it can operate.

The issue can be seen on a BT HomeHub 5A as well as soon as
the caldata are on an ubi volume. This is because the ath9k
card has to be initialized by owl-loader first. Which has to
wait for the firmware extraction script to retrieve the pci
initialization values inside the caldata.

This patch moves the wifi configuration to hotplug scripts.
For mac80211, the wifi configuration will now automatically
run any time a "ieee80211" device is added. Likewise
broadcom-wl's script checks for new "net" devices which
have the "wl$NUMBER" moniker.

Issues with spawning multiple interface configuration - in
case the detection script is run concurrently - have been
resolved by using a named section for the initial
configuration. Concurrent configuration scripts will now
simply overwrite the same existing configuration.

A workaround which preserves the "sleep 1" window for just
the first boot has been added. This allows the existing
brcm47xx boot and mvebu uci-default scripts to correctly
setup the initial mac addresses and regulatory domain.

And finally, the patch renames the "wifi detect" into
"wifi config". As the script no longer produces any output
that has to be redirected or appended to the configuration
file.

Thanks to Martin Blumenstingl for helping with the implementation
and testing of the patch.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:08:01 +01:00
Christian Lamparter
5e35b4562f base-files, mac80211, broadcom-wl: use uci to populate wireless config
Previously, wifi detect simply dumped its generated wireless
configuration to STDOUT. A second step was needed to append
the configuration to /etc/config/wireless (or create it, if
it didn't exist).

With this patch, The wifi detection script will now use uci
to update the wireless configuration directly.

This patch also makes the initially created wifi-iface a
named section ('default_radio$X' for mac80211 and
'default_wl$X' for broadcom). With this change, uci will
not print the cfgHASH to STDOUT (which would now corrupt
the wireless configuration). It will also prevent adding
duplicated wifi interface configurations, if the wifi
configuration is run concurrently.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-11-03 11:08:01 +01:00
Felix Fietkau
f78405f500 mac80211: fix regdomain change issues with CONFIG_ATH_USER_REGD
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:04:57 +01:00
Felix Fietkau
69ace0824f mac80211: fix a minor issue in the header padding patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:04:54 +01:00
Felix Fietkau
4dfc0be07b mac80211: fix AP powersave issues introduced in the last wireless-testing update (FS#241)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-03 11:04:30 +01:00
Stefan Koch
a7672fa5b4 lantiq: added xrx200 as plattform for ltqvmmc
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
8c08ccc937 lantiq: added xrx200 as plattform for ltqtapi
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:33 +01:00
Stefan Koch
04cf9443c5 lantiq: fix vmmc build
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit 47b1ff965b0cb57013b40fbe2bcd7f3c6eb6b606)

Modified after cherry-pick:
FW_MD5SUM in Makefile

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:51:29 +01:00
Stefan Koch
29367aac42 lantiq: ltq-vmmc add support for ar9-vr9
(required not-distributable firmware blob - dump it by yourself from original firmware)

Signed-off-by: Eddi De Pieri <eddi@depieri.net>

(cherry picked from commit ea9e61b8eb61a2e362a50541f03466dc7d087947)
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
2016-10-31 16:49:55 +01:00
John Crispin
168adaefc2 linux/modules: drop ledtrig-netfilter
this is a duplicate of kmod-ipt-led

Signed-off-by: John Crispin <john@phrozen.org>
2016-10-27 15:29:36 +02:00
Ben Greear
6408ea0486 ath10k-ct: Add QCA9888/9886 support, fix compat issue.
This should fix problems with latest backports, and also adds
driver support for QCA9888 chipset.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-10-27 12:45:05 +02:00
Imre Kaloz
5da412bf80 mwlwifi: upgrade to 10.3.2.0-20161013
Also install the 88W8964 firmware.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-10-24 08:45:06 +02:00
Rafał Miłecki
d0b50c2770 kernel: drop usbdev LED trigger
It was LEDE's trigger that was replaced by upstream usbport one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Ben Greear
536420647a ath10k-ct: Update to latest 4.7 CT ath10k driver.
Adds Sebastian's 160Mhz support (un-tested), remove DMA32 change that
broke some x86 systems, allow setting 10.1 CT firmware keepalive watchdog
timeout, support QCA 9887 hardware, and some other tweaks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-10-19 11:13:11 +02:00
Rafał Miłecki
81fd64df81 kernel: add package for usbport LED trigger
This is upstream alternative for LEDE's ledtrig-usbdev. It's main
advantages are:
1) Support for assigning more than 1 USB port to the LED
2) Setting proper state when activating with device already connected
3) FWIW it's an upstream driver

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-18 14:27:14 +02:00
Felix Fietkau
b7b223be41 mac80211: backport some upstream a-msdu tx fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-17 12:18:25 +02:00
Felix Fietkau
5f9598a432 mac80211: fix build error in ath10k with hwmon enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-17 11:01:37 +02:00
Mathias Kresin
18bb1c9391 ltq-adsl-mei: fix build error
The file to patch doesn't exists. Due to the fact that a src directory
exists, the patch was never applied.

With 28502a9 the behaviour was changed and revealed the issue.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 16:46:42 +02:00
Alexandru Ardelean
ba7cba95f2 kernel/wrt55agv2-spidevs: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
8fe09409da kernel/w1-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
e09ff19752 kernel/trelay: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
9168abe8b5 kernel/spi-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
7b3ba5a3a9 kernel/rtc-rv5c386a: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
ca599bb2a7 kernel/rotary-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
28502a928c kernel/lantiq/ltq-*: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Alexandru Ardelean
f56f749d30 kernel/i2c-gpio-custom: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
a1236a30a0 kernel/gpio-button-hotplug: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
4f9c6c5235 kernel/button-hotplug: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
Alexandru Ardelean
9f5770b81f kernel/avila-wdt: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:52 +02:00
David Woodhouse
8a2a20e71e ltq-ptm: Support 1508-byte MTU for RFC4638
Tested with VDSL on TP-Link WD8970, I see full 1500-byte PPP data
frames, which end up being 1526 byte Ethernet frames (including
Ethernet+VLAN headers) on the wire.

Fixes: FS#210

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2016-10-15 11:36:51 +02:00
Felix Fietkau
ad51e09fd1 mac80211: update to wireless-testing 2016-10-08
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-13 17:06:03 +02:00
daniel
4104613fae kernel: ext4: Add missing kmod-crypto-crc32c dependency
This fixes the following error when mounting a ext4 filesystem
----
[  166.240000] EXT4-fs (sda1): Cannot load crc32c driver.
----

Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
2016-10-13 17:04:28 +02:00
Mathias Kresin
e6b2880276 netfilter: remove nf_tproxy_core references
nf_tproxy_core was removed during 3.12 development with kernel commit
fd158d79d33d3c8b693e3e2d8c0e3068d529c2dc. The code was moved
to xt_TPROXY.c.

Fixes FS#212

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-11 09:03:12 +02:00
Álvaro Fernández Rojas
757228b137 mac80211: update rtl8xxxu patches
Adds the latest patches from Jes Sorensen for rtl8xxxu, which improve
rtl8732bu, rtl8192eu and rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-08 09:41:26 +02:00
Daniel Engberg
9edfe7dd13 source: Switch to xz for packages and tools where possible
* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-10-06 12:16:56 +02:00
Jo-Philipp Wich
4855fa35e3 kernel: fix kmod-sound-hda-core on Linux 3.18
The kmod-sound-hda-core module attempts to package snd-hda-core.ko which
does not exist in Linux 3.18, therfore only use it for kernels >= 4.1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05 01:38:13 +02:00
Jo-Philipp Wich
8462ec3134 kernel: add missing snd-hda-intel module for Linux 3.18 and 4.1
Prior to kernel 4.4, the hda-intel module depends on the hda-controller
utility submodule so bundle it for the older kernel versions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-05 00:45:12 +02:00
Felix Fietkau
46f2ca9a8f kernel: move kmod-owl-loader to the right .mk file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-04 16:01:42 +02:00
Felix Fietkau
4a5bab78a2 kernel: fix sound-hda-core dependency
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-10-04 16:01:42 +02:00
Kevin Darbyshire-Bryant
de8e032385 kmod-sched-cake: update to 161002 version
Implement IPv4 de-masquerading. *
Implement PTM (VDSL2) overhead 65/64 compensation. *
Update diffserv4 priorities.

*Requires corresponding update to iproute2/tc for user/kernel space
handling.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-10-04 11:50:48 +02:00
Daniel Dickinson
d0f17fe682 linux/modules/fs: Fix missing vfat dependencies
vfat filesystem fails to mount due to missing codepages with
factory-formatted flash drives.  Depend on cp437 iso8559-1 and
utf8 nls modules as this covers most factory-formatted vfat
filesystems.

Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-10-04 11:50:48 +02:00
Daniel Dickinson
8a542b8516 kernel/sound: Add support for PCI HD Audio devices
This patch set adds support for PCI Intel HD Audio
sound devices.  This is useful for multimedia packages
in the packages feed that one may use to create audio
servers.

Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-10-04 11:50:47 +02:00
Matthias Schiffer
cea09329e5
netfilter: fix file conflicts between kmod-ipt- and kmod-nft- packages
The nf_reject_* and nf_nat_masquerade_* modules are moved into the
corresponding kmod-nf- packages. Appropriate dependencies are added to the
kmod-nft- packages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-30 23:32:05 +02:00
Matthias Schiffer
c50ba61caf
kernel: fix module dependency checking
Since the kernel makefile is using .ONESHELL, we need to add -e to
.SHELLFLAGS so errors are not ignored.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-30 23:32:04 +02:00
Felix Fietkau
fc88eb3fdf ath9k: remove patch causing stability issues with powersave devices (FS#176)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-30 10:50:20 +02:00
Felix Fietkau
31e0f0aec0 kernel: do not enable the unpackaged rfkill-gpio driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 18:25:49 +02:00
John Crispin
72e9d19f6e mac80211: fix rfkill dependency
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-29 11:39:41 +02:00
Álvaro Fernández Rojas
c795794eef mac80211: use upstream patches for rtl8xxxu
Also improves rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-29 10:32:41 +02:00
John Crispin
986ec56507 rfkill: add fake rfkill support
allow building of modules depending on RFKILL even if RFKILL is not enabled.

Signed-off-by: John Crispin <john@phrozen.org>
2016-09-27 20:27:26 +02:00
Matthias Schiffer
82aa061251
kernel: remove echainiv.ko from kmod-crypto-iv
There is a separate package kmod-crypto-echainiv for echainiv.ko. Selecting
both packages led to a conflict, so remove the file from kmod-crypto-iv.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-28 02:39:18 +02:00
Rafał Miłecki
a0ce6982d8 mac80211: backport brcmfmac changes from 2016-09-27
This fixes bug that could cause WARNING on every add_key/del_key call.
It also replaces WARNING with a simple message. They may still occur
e.g. on station going out of range and A-MPDU stall in the firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-27 18:23:53 +02:00
Rafał Miłecki
45b73af7f6 mac80211: backport brcmfmac changes from 2016-09-26
All these patches are in wireless-drirvers-next. There is support for
hidden SSID, few new devices and many fixes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-27 07:00:53 +02:00
Felix Fietkau
da4e81960d mac80211: fix crash in mac80211_hwsim
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 16:19:58 +02:00
Matthias Schiffer
ce89535bce
kernel: remove duplicate br-netfilter file and Kconfig symbol from kmod-ebtables
br_netfilter.ko and the corresponding Kconfig symbol are already provided
by kmod-br-netfilter, which is a dependency of kmod-ebtables.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-24 23:37:54 +02:00
Felix Fietkau
175237e7df kernel: fix broken dependency of kmod-owl-loader on kmod-ath9k
It messes up the build order of package/kernel/linux vs
package/kernel/mac80211

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-22 20:09:20 +02:00
Hauke Mehrtens
7ecbc27951 ltq-vdsl: update to version 4.17.18.6
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-09-20 22:43:43 +02:00
Hauke Mehrtens
3a4db8548f ltq-vdsl-mei: update mei driver to version 1.5.17.6
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-09-20 22:43:43 +02:00
Christian Lamparter
e9401a2335 kernel: owl-loader for delayed Atheros ath9k fixup
Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
need to be able to initialize the PCIe wifi device. Normally, this is done
during the early stages of booting linux, because the necessary init code
is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
However,this isn't possible for devices which have the init code for the
Atheros chip stored on NAND in an UBI volume. Hence, this module can be
used to initialze the chip when the user-space is ready to extract the
init code.

Martin Blumenstingl made a few fixes and added support for lantiq:
kernel: owl-loader: add support for OWL emulation PCI devices
kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed
kernel: owl-loader: use dev_* instead of pr_* logging functions
kernel: owl-loader: auto-generate the eeprom filename as fallback
kernel: owl-loader: add a debug message when swapping the eeprom data
kernel: owl-loader: add missing newlines in log messages
kernel: owl-loader: add support for the lantiq platform

These patches have been integrated. Thanks!

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2016-09-19 19:32:35 +02:00
Hauke Mehrtens
0109ed87d9 kernel: add nlmon kernel module
This driver allows to monitor netlink communication on the system.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-09-16 23:00:01 +02:00
Álvaro Fernández Rojas
092e77d948 rtl8xxxu: add support for rtl8188eu
Patches by Jes Sorensen:
https://git.kernel.org/cgit/linux/kernel/git/jes/linux.git/

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Álvaro Fernández Rojas
f7670a2d07 mac80211: stop brcmfmac from selecting all SDIO firmwares
Now that we have firmwares separated and brcm2708 being the only target that
actually selects SDIO support, avoid selecting all firmwares by default.
sunxi should select the proper firmwares once SDIO support is enabled and
tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Álvaro Fernández Rojas
daa5691a4d linux-firmware: separate packages for Broadcom FullMAC SDIO firmwares
Using few packages will allow saving some space by decreasing rootfs
size.

Moreover there are more firmware files that may require packaging and
even more to come later.

This can especially useful now, with per device rootfs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-15 20:23:46 +02:00
Felix Fietkau
fa05f1d41b kernel: fix missing rename on usb gadget kmod cleanup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-15 17:01:40 +02:00
Tim Harvey
dc17fde994 kernel: clean up usb gadget support
clean up usb gadget support:
- rename gadget modules so that they appear together and are easier to
  identify as gadget modules
- make usb-lib-composite and usb-gadget hidden as there is no point in
  selecting those without gadget drivers that require them as deps

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-15 13:11:21 +02:00
Rafał Miłecki
65c5d097a4 mac80211: stop brcmfmac from selecting all PCIe firmwares
Now we have firmwares separated and bcm53xx selecting required ones make
use of it to actually save that rootfs space.
Other targets using brcmfmac (brcm2708 and sunxi) use SDIO interface and
firmware so they don't won't be affected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-14 22:12:57 +02:00
Rafał Miłecki
ac887f4832 linux-firmware: separate packages for Broadcom FullMAC PCIe firmwares
Using few packages will allow saving some space by decreasing rootfs
size. Dropping 43602a1 firmware saves 316 580 B. Dropping 4366b1 saves
468 188 B.

Moreover there are more firmware files that may require packaging and
even more to come later (e.g. 4366c0).

This can especially useful now, with per device rootfs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-13 10:31:01 +02:00
Felix Fietkau
f3747020e2 mac80211: fix tx issue with CCMP PN generated in hardware
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 11:25:33 +02:00
Álvaro Fernández Rojas
ac08cb06f6 brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-10 14:54:08 +02:00
Felix Fietkau
c4bfb119d8 mac80211: remove the fq-disable hack, now that reordering is fixed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Felix Fietkau
a194ffd4a8 mac80211: fix packet loss on fq reordering
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-08 15:28:38 +02:00
Petko Bordjukov
c5913264e7 mwlwifi: Expose the IEEE 802.11w support to hostapd
Add a dependency on DRIVER_11W_SUPPORT in order to enable the IEEE
802.11w functionality in hostapd.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
2016-09-05 19:24:37 +02:00
Alexis Green
aeea251fad ath10k-ct: fix missing symbols if ath9k is not selected
Require kernel to compile with CONFIG_RELAY=y

Signed-off-by: Alexis Green <alexis@cessp.it>
2016-09-05 18:01:59 +02:00
Felix Fietkau
49a6f67c39 mac80211: backport new register bitfield macros
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-05 17:46:26 +02:00
Felix Fietkau
9cf0444768 mac80211: add a tx sequence number allocation fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-05 14:02:34 +02:00
Tim Harvey
232893037a generic: add NET3380 UDC support
Add a patch to backport 5185c91385d73cdf79836eb8548e4726e43ae831
from Linux 4.8 adding USB2380 support to the NET2280 driver and
create an OpenWrt menu option to select it as a module.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-04 13:36:10 +02:00
Felix Fietkau
dbc9ee5b72 ath9k: fix regression in tx queueing patch
power save response frames can go through the old tx path, and the tid
needs to be set for sequence numbers to be assigned correctly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:53 +02:00
Gabe Rodriguez
2d418381bb mwlwifi: Updated to latest source
This commit updates the mwlwifi driver to the latest version provided in the repo.

Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
2016-09-02 14:43:52 +02:00
Felix Fietkau
a894a535ff mac80211: add fixes for dealing with unexpected BlockAck frames
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:52 +02:00
Felix Fietkau
372d0fea29 ath9k: add a bunch of powersave handling fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:51 +02:00
Felix Fietkau
1e72d1bf16 mac80211: add a powersave handling fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:51 +02:00
Felix Fietkau
3e4d0e3e77 ath9k: revert temperature compensation support patch (FS#111)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-28 14:08:49 +02:00
Felix Fietkau
4530ca3c11 kernel: remove obsolete legacy ide kernel module packages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-28 13:51:42 +02:00
Ben Greear
d66db35a1d ath10k-ct: Remove useless WARNING for 10.4 firmware.
Removes a useless splat in ath10k, and adds some safety code
around setting keys in the firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-08-28 13:51:41 +02:00
Felix Fietkau
acffa62d12 mt76: update to the latest version
Adds client + ad-hoc mode fixes and some initial TPC preparation work

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-25 13:00:10 +02:00
Toke Høiland-Jørgensen
e58c20aac3 ath9k: Set ATH9K_STATION_STATISTICS when enabling debugging
The ATH9K_STATION_STATISTICS kernel config variable enables some extra
statistics that are useful for debugging (in particular with the airtime
fairness patches enabled). This adds that kernel config when selecting
ath9k debugging.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2016-08-23 13:30:59 +02:00
Ben Greear
4c451ae0a7 ath10k-ct: Update to latest ath10k-ct driver.
This uses GFP_DMA32 for firmware swap.  Fixes issue on x86-64 with
QCA 9984 chipset when host system does not have vt-d enabled.

Also tested on linksys ea8500 with 9980 chipset.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-08-23 11:55:32 +02:00
Daniel Golle
d7e040f8bc kernel: add fake users for udptunnel and iptunnel modules
Without any in-tree users enabled the Kernel's build process doesn't
actually build those modules. Enable some potential in-tree users
during Kernel build, so out-of-tree modules can depend on them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-22 17:23:05 +02:00
Martin Schiller
070edfd92f ltq-deu: fix cra_priority
With the default priority of 0, the DEU algos would be overlapped
by the generic algos (if available).

To fix this, set the cra_priority of the hardware algos to the
recommended value of 300/400.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-20 05:33:09 +02:00
Martin Schiller
9391661394 ltq-deu: fix handling of data blocks with sizes != AES/DES block size
This fix is a backport from the lantiq UGW-6.1.1-MR1

Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-20 05:32:56 +02:00
Martin Schiller
8dba24cfc2 ltq-deu: fix aes initialization vector handling
This fix is a backport from the lantiq UGW-6.1.1-MR1

Signed-off-by: Martin Schiller <mschiller@tdt.de>
2016-08-20 05:32:44 +02:00
Felix Fietkau
fe7fdd3bb4 ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-17 07:02:54 +02:00
Matteo Croce
2ebb4733e1 kernel: add kmod-squashfs
add kernel package to build squashfs as module when it's not the root filesystem

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
2016-08-15 15:32:38 +02:00
Imre Kaloz
f76f83de71 mwlwifi: upgrade to 10.3.0.18-20160804
adds support for the Linksys WRT1900ACSv2 and WRT1200ACv2

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
2016-08-11 21:04:42 +02:00
Felix Fietkau
08a27b99a2 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-11 18:33:02 +02:00
Ben Greear
f85c12e07d ath10k-ct: Fix loading 9980 firmware.
ath10k-ct driver was using bad defaults for 9980 if user
had not specified a fwcfg file to over-ride them.

Also, support configurable station-kickout-threshold,
which might work around issues with flakey connections.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix PKG_VERSION]
2016-08-11 10:54:50 +02:00
Matteo Croce
1645abffea kernel: add plan 9 fs package
9pfs is used by kvm to share files between host and guest,
add proper config option to enable it.

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
2016-08-11 10:45:33 +02:00
Mathias Kresin
14e0f057c8 ltq-hcd: fix xway dependency
Due to missing parameter the package wasn't build for the xway target.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 03:04:08 +02:00
Petko Bordjukov
b34ccf45df mac80211: Update the regdb to master-2016-06-10
Changes include:

* Higher maximum transmit power in the 5170-5250 band of the BG
  regdomain
* Introduction of the CU regdomain
* Introduction of the 5725-5875 band (short-range devices) in the DE
  regdomain
* Introduction of 60 GHz channels 1-4 in the KR regdomain
* Introduction of the 5725-5875 band (short-range devices) in the NL
  regdomain

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
2016-08-07 23:55:38 +03:00
Felix Fietkau
ac642a7514 ath9k: improve powersave filter handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 23:10:41 +02:00
Felix Fietkau
4701fd3190 ath9k: improve performance in tx status handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 23:10:41 +02:00
Felix Fietkau
1b9dbb8532 Revert "kernel: remove long obsolete gpio spi controller driver patch"
This reverts commit 9e62a7668c.
2016-08-04 23:10:15 +02:00