Commit Graph

623 Commits

Author SHA1 Message Date
Daniel Golle
efcc100ef0 base-files: upgrade: nand.sh: mute umount error
Send error output of umount to /dev/null to mute error in case
ubiblock device has already been unmounted (which is usually the
case).
Gets rid of bogus error message:
umount: can't unmount /dev/ubiblock0_4: Invalid argument

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-01 00:52:54 +00:00
Philip Prindeville
95157dde04 base-files: functions.sh: prepend() always adds separator
It shouldn't gate on the value, since the value will ostensibly
always be set; instead it should depend on the variable being
prepended to being non-empty.

Fixes #14403

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2024-01-15 10:41:09 -07:00
Christian Marangi
0b23d3608c
base-files: add support for rootfs mount options from cmdline
Add support for configuring rootfs mount options from cmdline.

Rootfs mount options can be passed by declaring in the kernel
cmdline as much options as needed prefixed with "rootfs_mount_options."

An example usage is with rootfs with F2FS filesystem to enable
compress_algorithm to reduce flash wear by compressing the files before
writing to flash.

Example usage:
"... rootfs_mount_options.compress_algorithm=zstd ..."

To pass multiple options:
"... rootfs_mount_options.compress_algorithm=zstd rootfs_mount_options.noinline_data ..."

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-01-15 16:44:29 +01:00
Rafał Miłecki
b799dd3c70 base-files: execute package's "postinst" after executing uci-defaults
Allow "postinst" scripts to perform extra actions after applying all
kind of fixups implemented using uci-defaults.

This is needed e.g. by uhttpd-mod-ubus which after installation in a
running systems needs to:
1. Update uhttpd config using its uci-defaults script
2. Reload uhttpd

While this approach makes sense there is a risk it'll blow up some
corner case postinst usages. There is only 1 way to find out.

Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-12-27 16:01:30 +01:00
Philip Prindeville
e906ccfc8c base-files: ipcalc.sh: Add tests for unroutable, etc
See RFC-1918, RFC-3927, and RFC-1122.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-12-12 12:30:35 -07:00
Philip Prindeville
dd256099c3 base-files: ipcalc.sh: Add netmask2prefix function
Also add is_contiguous to check if it's a valid netmask.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-12-12 12:30:35 -07:00
Philip Prindeville
6cdc429a48 base-files: ipcalc.sh: Add prefix-to-netmask conversion
Seems like it might be used in other places, so factor it into the
library.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-12-12 12:30:35 -07:00
Philip Prindeville
f0612c0d84 base-files: ipcalc.sh: Add some commentary, etc.
Explain some of the more obscure logic, or where we deviate from
what the original awk code did.  Also, give a count of the usable
addresses on the subnet.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-12-12 12:30:35 -07:00
Philip Prindeville
854739b32c base-files: ipcalc.sh: Rewrite in pure shell
Also add better error checking on input.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-12-12 12:30:35 -07:00
Daniel Golle
45c85c1827 base-files: add mmc_get_mac_ascii function
Similar to the *_get_mac_binary function, also split the common parts
off mtd_get_mac_ascii into new get_mac_ascii function and introduce
mmc_get_mac_ascii which uses it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-12-09 22:47:10 +00:00
Shiji Yang
e814acc599 base-files: support parse DT LED color and function
The 'label' property in led node has been deprecated and we'd better
to avoid using it. This patch allows us to extract DT OF LED name
from the newly introduced LED properties "color", "function" and
"function-enumerator".

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-12-02 19:46:14 +01:00
Christian Marangi
01d675687c
base-files: add additional uci-defaults function for GRO and conduit
Add additional uci-defaults function for configuring GRO settings and
conduit for network devices.

Tweaking the GRO values might increase performance on some low spec
device that lack some offload feature on gmac.

Tweaking conduit interface is specific to DSA based devices and is
useful for multi-CPU scenario where one CPU is dedicated to one single
port.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-11-10 12:30:34 +01:00
Christian Marangi
da7ad22931
base-files: generalize ucidef_set_network_device
Generalize ucidef_set_network_device functions to use a more generic
_ucidef_set_network_device_common that takes as args the option and the
value to apply instead of hardcoding.

This is to reduce duplicated code in preparation for addition of
additional option for board.d usage.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-11-10 12:30:33 +01:00
Philip Prindeville
1998027d7c base-files: functions.sh: Add prepend() homologue to append()
Sometimes it's useful to be able to prepend to a variable as
well, such as when dealing with domain names, e.g.

    prepend fdqn "$subdomain" "."

will result in:

   fqdn="$subdomain.$fqdn"

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2023-10-23 19:18:04 +02:00
Michael 'ASAP' Weinrich
12bc79d6d5
base-files: fix wrong ucidef_set_network_device_mac network-device entry
The ucidef_set_network_device_* functions in uci-defaults.sh disagree
on whether to use "network-device" or "network_device" in board.json.
With the additional caveat that jshn will translate hyphens (-) into
underscores (_). This casues problems in netifd which expected
"network_device" causing boards which depend on assigning MACs in
board.json via uci-defaults.sh (or jshn in general) to fail.

This commit addresses the issue by using network_device in
uci-defaults.sh.

The bug was uncovered in the forums here:
https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/2596

This was exposed by commit 4ebba8a05d ("realtek: add support for HPE
1920-8g-poe+") where the board_config_load call from 03_gpio introduced
the key normalization by jshn.

Fixes: 9290539ca9 ("base-files: allow setting device and bridge macs")
Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net>
[ improve commit title, description and fix wrong Tested-by tag ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-10-20 12:53:43 +02:00
Leon M. Busch-George
6b23836071 package: avoid the use of eval to parse ipcalc.sh output
Add a function 'ipcalc' to /lib/functions.sh that sets variables more
safely using export.
With this new function, dnsmasq also handles the return value of ipcalc
correctly.

Fixes: e4bd3de1be ("dnsmasq: refuse to add empty DHCP range")
Co-Authored-By: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-09-25 15:02:49 +02:00
Hannu Nyman
47d56ae546
base-files: sysupgrade: Add 2 sec sleep into process KILL loop
Add 2 seconds sleep after each forcibly killed/tried-to-kill process
in the final process termination loop in sysupgrade stage2.

This is needed especially for qualcommax/ipq807x, where ath11k
wireless driver may have a long 10-20 seconds delay after termination
before actually getting killed. This often breaks sysupgrade.

The current KILL loop in kill_remaining does all 10 kill attempts
consecutively without any delay, as evidenced here in a failing sysupgrade.
It does not allow any time for the process to finalize its internal
termination.

Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2122)
Sat Sep  2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2122)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138)
Sat Sep  2 19:06:00 EEST 2023 upgrade: Failed to kill all processes.
sysupgrade aborted with return code: 256

The change in this commit adds a 2 seconds delay after each kill attempt
in order to allow some processes to more gracefully handle their
internal termination.

The result is like this:

Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending TERM to remaining processes ...
Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2309)
Sun Sep  3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2324)
Sun Sep  3 11:15:14 EEST 2023 upgrade: Sending KILL to remaining processes ...
Sun Sep  3 11:15:14 EEST 2023 upgrade: Sending signal KILL to hostapd (2309)
[  699.827521] br-lan: port 7(hn5wpa2r) entered disabled state
[  699.908673] device hn5wpa2r left promiscuous mode
[  699.908721] br-lan: port 7(hn5wpa2r) entered disabled state
[  701.038029] br-lan: port 6(hn5wpa3) entered disabled state
Sun Sep  3 11:15:16 EEST 2023 upgrade: Sending signal KILL to hostapd (2324)
[  702.058256] br-lan: port 5(hn2wlan) entered disabled state
[  709.250063] stage2 (8237): drop_caches: 3
Sun Sep  3 11:15:25 EEST 2023 upgrade: Switching to ramdisk...

The delay introduced here only kicks in if there is some process that
does not get terminated by the first TERM call. Then there is at least
one 2 sec wait after the first KILL loop round.

This commit is related to discussion in PRs #12235 and #12632

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-09-12 14:52:50 +02:00
Álvaro Fernández Rojas
434df8df54 base-files: upgrade: nand: add JFFS2 cleanmarkers support
Some Broadcom MIPS devices require JFFS2 cleanmarkers to be present on the
kernel partition or the bootloader will identify the partition as corrupt and
won't boot the kernel.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-15 10:49:41 +02:00
Olliver Schinagl
3da70c6469 base-files: Do not break on non-eth ports
When using OpenWRT with DSA and 'lan' ports, we could get an empty
`next_eth`. This is of course not desirable, as this causes `sh: out of
range` errors when trying to determine which one would be greater.

It turns out, that we don't even need this check at all because, when
looking for all existin eth*s on a system, and take the highest index
and then iterate a set of devices and rename to eth${highest_index+n},
it is guaranteed that there will be no conflict.

Fixes: b688bf83f9 ("base-files: rename ethernet devs on known boards")
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2023-05-09 22:54:38 +02:00
Rafał Miłecki
c798adad6b base-files: fix nand_upgrade_ubinized()
When using "ubiformat" with stdin it requires passing image size using
the -S argument. Provide it just like we do for "ubiupdatevol".

This fixes:
ubiformat: error!: must use '-S' with non-zero value when reading from stdin

This change fixes sysupgrade for bcm53xx and bcm4908 NAND devices
possibly some other targets too.

Cc: Rodrigo Balerdi <lanchon@gmail.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Fixes: 9710712120 ("base-files: accept gzipped nand sysupgrade images")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
2023-04-11 13:42:47 +01:00
Mark Baker
f35e2422b8 base-files: add support for retrieving IPv6 assignments
In DHCPv6-PD enabled environments, addresses are assigned to interfaces.
These new functions retrieve the IPv6 assigned prefix(es).

Signed-off-by: Mark Baker <mark@vpost.net>
2023-02-24 23:56:36 +01:00
Daniel Golle
e8625c89ef treewide: replace /sys/devices/virtual/ubi by /sys/class/ubi
Starting from Linux Kernel version 6.3 UBI devices will no longer be
considered virtual, but rather have an MTD device parent. Hence they
will no longer be listed under /sys/devices/virtual/ubi which is
used in multiple places in OpenWrt. Prepare for future kernels by
using /sys/class/ubi instead of /sys/devuces/virtual/ubi.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-02-15 03:27:59 +00:00
Brian Norris
3cd882744d base-files: upgrade: Fix export_partdevice() quoting
$BOOTDEV_MAJOR may be empty for many of the uevents parsed in this
function. This condition thus tends to fail benignly (we just skip to
the next device), but it can really clutter the stage2 sysupgrade
stderr, since it looks like the "=" operand doesn't have an appropriate
left-hand argument.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-02-03 14:09:46 +01:00
Chen Minqiang
781a3ae5dc base-files: fix nand_do_platform_check fail
This change ensures compatibility with both types of sysupgrade-tar files.

1. For some boards like xiaomi,redmi-router-ax6s, sysupgrade-tar
   is pack in directory `vendor,name/`

2. For some boards like xiaomi,mi-router-3g, sysupgrade-tar is pack
   in directory `vendor_name/`

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2023-01-29 01:02:45 +00:00
Brian Norris
d3c19c71f6
base-files: Remove nand.sh dependency from emmc upgrade
emmc_do_upgrade() relies on identify() from the nand.sh upgrade helper.
This only works because FEATURES=emmc targets also tend to include
FEATURES=nand.

Rename identify_magic() to identify_magic_long() to match the common.sh
style and make it clear it pairs with other *_long() variants (and not,
say *_word()).

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2023-01-21 01:02:23 +01:00
Michael Pratt
1e3a8f454e base-files: rework mtd_get_mac_text()
It's necessary to be able to specify the length
for MAC addresses that are stored in flash, for example,
in a case where it is stored without any delimiter.

Let both offset and length have default values.

Add a sanity check related to partition size.

Also, clean up syntax and unnecessary lines.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
2023-01-06 15:34:07 +01:00
Nikolay Martynov
665c2154ef ramips: add basic support for tp-link er605-v2
This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port.
The board has headers to attach console. In order for them to work two solder
bridges near those pads need to be made.

The defice has the following partition table:

```
0x000000000000-0x000000080000 : "u-boot"
0x000000080000-0x000000100000 : "u-boot-env"
0x000000100000-0x000000140000 : "factory"
0x000000140000-0x000007e00000 : "firmware"
0x000007e00000-0x000008000000 : "panic-ops"
```

`firmware` partition contains UBI volumes. Unfortunately I accidentally wiped
partition and I no longer have access to it.

`firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot.
It also contains various configuration partitions that include device info and
MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes.

U-boot has `mtkupgrade` command that just overrides data on firmware partitions.
Firmware file provided by TP-Link cannot be used with that command.

U-boot also has 'recovery' http server. Unfortunately I was not able to make it
work with manufacturer's firmware.

Manufacturer's firmware essentially contains multiple UBI volumes along with
'partition table'. Unfortunately I no longer can properly run manufacturer's
firmware so I cannot at the moment try to a support for building 'factory' images.

This patch adds support for initramfs image as well as sysupgrade image.

This seems to be pretty standard MT7621 board otherwise.

Things that work:
* network
* leds
* usb
* factory MAC detection

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
2023-01-04 23:19:19 +01:00
Tony Ambardar
9cbc825b30 base-files: stage2: add 'tail' to sysupgrade environment
This is used to access footer data in firmare files, and is simpler and
less error-prone than using 'dd' with calculated offsets.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2022-12-31 05:02:38 -08:00
Jan-Niklas Burfeind
c7d3bbb909 sunxi: ensure NanoPi R1 has unique MAC address
Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for
each board.

The vendor ships the device in two variants; one with and one without
eMMC; but both without static mac-addresses.
In order to assign both board types unique MAC addresses, fall back on
the same method used for the NanoPi R2S and R4S in case the EEPROM
chip is not present by generating the board MAC from the SD card CID.

[0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec

Similar too and based on:

commit b5675f500d ("rockchip: ensure NanoPi R4S has unique MAC address")

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2022-12-25 02:27:55 +01:00
Chuanhong Guo
189637c964 base-files: sysupgrade-tar: allow separated kernel/rootfs ubi
There are some devices putting kernel and rootfs on separated
ubi volumes. To make OpenWrt compatible with their bootloader,
we need to put kernel and rootfs into separated ubi volumes.
Add support for CI_KERN_UBIPART and CI_ROOT_UBIPART for this
situation.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-12-17 14:08:58 +08:00
Chuanhong Guo
c48e511fef base-files: split ubi attaching out of nand_upgrade_prepare_ubi
split ubi reformat/attach into nand_attach_ubi in preparation
for reusing this code in other functions.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2022-12-17 14:08:58 +08:00
Daniel Golle
84ff6c90dd
base-files: bring back nand_do_upgrade_success
Several Broadcom targets were using the nand_do_upgrade_success
shell function which has been removed by commit e25e6d8e54
("base-files: fix and clean up nand sysupgrade code"). Refactor the
new nand_do_upgrade to bring back nand_do_upgrade_success with the
behavior expected by those users.

Fixes: e25e6d8e54 ("base-files: fix and clean up nand sysupgrade code")
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-10-30 20:26:12 +00:00
Rodrigo Balerdi
9d1e687da3 base-files: verify nand sysupgrade images
For nand sysupgrade image files having tar/gzip/tgz envelopes, verify
envelope integrity before starting sysupgrade.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-10-30 14:29:56 +00:00
Rodrigo Balerdi
9710712120 base-files: accept gzipped nand sysupgrade images
When firmware images only contained compressed kernels and squashfs roots,
uncompressed tar files were a good option. We are now using UBIFS images,
both raw and tarred, as well as ubinized (full UBI partition) images, all
of which benefit greatly from compression.

For example, a raw ubinized backup taken from a running Askey RT4230W REV6
(such full backups can be restored via the LUCI's sysupgrade UI) is over
400 MB, but compresses to less than 10 MB.

This commit adds support for gzipped versions of all file types already
accepted by the nand sysupgrade mechanism, be them raw or tarred.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-10-30 14:29:56 +00:00
Rodrigo Balerdi
af34733593 base-files: fix ubinized nand sysupgrade
It has been reported that ubinized nand sysupgrade fails under certain
circumstances, being unable to detach the existing ubi partition due to
volumes within the partition being mounted.

This is an attempt to solve such issues by unmounting and removing
ubiblock devices and unmounting ubi volumes within the target partition
prior to detaching and formatting it.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-10-30 14:29:56 +00:00
Rodrigo Balerdi
e25e6d8e54 base-files: fix and clean up nand sysupgrade code
- Never return from 'nand_do_upgrade', not even in case of errors, as that
  would cause execution of sysupgrade code not intended for NAND devices.
- Unify handling of sysupgrade success and failure.
- Detect and report more error conditions.
- Fix outdated/incorrect/unclear comments.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-10-30 14:29:56 +00:00
Felix Fietkau
7f9d3a00d8 base-files: add helper functions for adding wlan device entries to board.json
These will be used to give WLAN PHYs a specific name based on path specified
in board.json. The platform board.d script can assign a specific order based
on available slots (PCIe slots, WMAC device) and device tree configuration.

This helps with maintaining config compatibility in case the device path
changes due to kernel upgrades.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:12:30 +02:00
Olliver Schinagl
211f4302e4
base-files: Actually set default name
The currently used shell expansion doesn't seem to exist [0] and also
does not work. This surely was not intended, so lets allow default
naming to actually work.

[0]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html

Fixes: be09c5a3cd ("base-files: add board.d support for bridge device")
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2022-09-22 21:37:45 +02:00
Nick French
20581ee8b5 ath79: add support for TP-Link Deco S4
Add support for TP-Link Deco S4 wifi router

The label refers to the device as S4R and the TP-Link firmware
site calls it the Deco S4 v2. (There does not appear to be a v1)

Hardware (and FCC id) are identical to the Deco M4R v2 but the
flash layout is ordered differently and the OEM firmware encrypts
some config parameters (including the label mac address) in flash

In order to set the encrypted mac address, the wlan's caldata
node is removed from the DTS so the mac can be decrypted with
the help of the uencrypt tool and patched into the wlan fw
via hotplug

Specifications:
SoC: QCA9563-AL3A
RAM: Zentel A3R1GE40JBF
Wireless 2.4GHz: QCA9563-AL3A (main SoC)
Wireless 5GHz: QCA9886
Ethernet Switch: QCA8337N-AL3C
Flash: 16 MB SPI NOR

UART serial access (115200N1) on board via solder pads:
RX = TP1 pad
TX = TP2 pad
GND = C201 (pad nearest board edge)

The device's bootloader and web gui will only accept images that
were signed using TP-Link's RSA key, however a memory safety bug
in the bootloader can be leveraged to install openwrt without
accessing the serial console. See developer forum S4 support page
for link to a "firmware" file that starts a tftp client, or you
may generate one on your own like this:
```
python - > deco_s4_faux_fw_tftp.bin <<EOF
import sys
from struct import pack

b = pack('>I', 0x00008000) + b'X'*16 + b"fw-type:" \
  + b'x'*256 + b"S000S001S002" + pack('>I', 0x80060200) \

b += b"\x00"*(0x200-len(b)) \
  + pack(">33I", *[0x3c0887fc, 0x35083ddc, 0xad000000, 0x24050000,
                   0x3c048006, 0x348402a0, 0x3c1987f9, 0x373947f4,
                   0x0320f809, 0x00000000, 0x24050000, 0x3c048006,
                   0x348402d0, 0x3c1987f9, 0x373947f4, 0x0320f809,
                   0x00000000, 0x24050000, 0x3c048006, 0x34840300,
                   0x3c1987f9, 0x373947f4, 0x0320f809, 0x00000000,
                   0x24050000, 0x3c048006, 0x34840400, 0x3c1987f9,
                   0x373947f4, 0x0320f809, 0x00000000, 0x1000fff1,
                   0x00000000])

b += b"\xff"*(0x2A0-len(b)) + b"setenv serverip 192.168.0.2\x00"
b += b"\xff"*(0x2D0-len(b)) + b"setenv ipaddr 192.168.0.1\x00"
b += b"\xff"*(0x300-len(b)) + b"tftpboot 0x81000000 initramfs-kernel.bin\x00"
b += b"\xff"*(0x400-len(b)) + b"bootm 0x81000000\x00"
b += b"\xff"*(0x8000-len(b))

sys.stdout.buffer.write(b)
EOF
```

Installation:
1. Run tftp server on pc with static ip 192.168.0.2
2. Place openwrt "initramfs-kernel.bin" image in tftp root dir
3. Connect pc to router ethernet port1
4. While holding in reset button on bottom of router, power on router
5. From pc access router webgui at http://192.168.0.1
6. Upload deco_s4_faux_fw_tftp.bin
7. Router will load and execture in-memory openwrt
8. Switch pc back to dhcp or static 192.168.1.x
9. Flash openwrt sysupgrade image via luci/ssh at 192.168.1.1

Revert to stock:
Press and hold reset button while powering device to start the
bootloader's recovery mode, where stock firmware can be uploaded
via web gui at 192.168.0.1

Please note that one additional non-github commits is also needed:
firmware-utils: add tplink-safeloader support for Deco S4

Signed-off-by: Nick French <nickfrench@gmail.com>
2022-09-11 21:54:00 +02:00
Martin Kennedy
b688bf83f9 base-files: rename ethernet devs on known boards
Some platforms lack an established way to name netdevs; for example,
on x86, PCIe-based ethernet interfaces will be named starting from
eth0 in the order they are probed. This is a problem for many devices
supported explicitly by OpenWrt which have hard-wired, standalone or
on-CPU NICs not supported by DSA (which is usually used to rename the
ports based on their ostensible function).

To fix this, add a mapping between ethernet device name and sysfs
device path to board.json; this allows us to configure ethernet device
names we know about for a given board so that they correspond to
external labeling.

Signed-off-by: Martin Kennedy <hurricos@gmail.com>
2022-09-10 21:16:20 +02:00
Mikhail Zhilkin
12c971bc26
base-files: add mtd_get_mac_encrypted_arcadyan function
Some Arcadyan devices (e.g. MTS WG430223) keep their config in encrypted
mtd. This adds mtd_get_mac_encrypted_arcadyan() function to get the MAC
address from the encrypted partition. Function uses uencrypt utility for
decryption (and openssl if the uencrypt wasn't found).

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2022-08-19 14:41:14 +02:00
Mark Mentovai
c9725d4fb6 failsafe: run on all consoles listed in /proc/cmdline
On x86, when both CONFIG_GRUB_CONSOLE and CONFIG_GRUB_SERIAL are set (as
they are by default), the kernel command line will have two console=
entries, such as

    console=tty0 console=ttyS0,115200n8

Failsafe was only running a shell on the first defined console, the VGA
console. This is a problem for devices like apu2, where there is only a
serial console and it appears on ttyS0.

Moreover, the console prompt to enter failsafe during boot was delivered
to, and its input read from, the last console= on the kernel command
line. So while the failsafe shell was on the first defined console, only
the last defined console could be used to enter failsafe during boot.

In contrast, the x86 bootloader (GRUB) operates on both the serial
console and the VGA console by virtue of "terminal_{input,output}
console serial". GRUB also provided an alternate means to enter failsafe
from either console. The presence of two console= kernel command line
parameters causes kernel messages to be delivered to both. Under normal
operation (not failsafe), procd runs login in accordance with inittab,
which on x86 specifies ttyS0, hvc0, and tty1, allowing login through any
of serial, hypervisor, or VGA console. Thus, serial access was
consistently available on x86 devices with serial consoles under normal
operation, except for shell access in failsafe mode (without editing the
kernel command line).

By presenting the failsafe prompt, reading failsafe prompt input, and
running failsafe shells on all consoles listed in /proc/cmdline,
failsafe mode will work correctly on devices with a serial console (like
apu2), and the same image without any need for reconfiguration can be
shared by devices with the more traditional (for x86) VGA console. This
improvement should benefit any system with multiple console= arguments,
including x86 and bcm27xx (Raspberry Pi).

Signed-off-by: Mark Mentovai <mark at moxienet.com>
2022-06-19 12:40:30 +02:00
David Bauer
34437af888 base-files: allow ignoring minor compat-version check
Downstream projects might re-generate device-specific configuration
based on OpenWrt's defaults on each upgrade, thus being unaffected by
forward- as well as backwards-breaking configuration.

Add a new sysupgrade parameter, which allows sysupgrades between minor
compat-versions. Upgrades will still fail upon mismatching major compat
versions.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-06-18 22:11:04 +02:00
Daniel Golle
7b07c3cff5
base-files: simplify restorecon logic
Remove forgotten redundant selinuxenabled call and skip the whole
thing in case $IPKG_INSTROOT is set as labels are anyway applied only
later on in fakeroot when squashfs is created.

Fixes: 6d7272852e ("base-files: add missing $IPKG_INSTROOT to restorecon call")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-05-02 21:11:05 +01:00
Daniel Golle
6d7272852e
base-files: add missing $IPKG_INSTROOT to restorecon call
Update to overlooked v2 version of Dominick Grift's patch.

Fixes: 5109bd164c ("base-files: address sed in-place without SELinux awareness")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-05-02 19:59:58 +01:00
Dominick Grift
5109bd164c
base-files: address sed in-place without SELinux awareness
sed(1) in busybox does not support this functionality:
https://git.savannah.gnu.org/cgit/sed.git/tree/sed/execute.c#n598

This causes /etc/group to become mislabeled when a package requests
that a uid/gid be added on OpenWrt with SELinux

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[move restorecon inside lock]
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2022-05-02 18:56:02 +01:00
Rodrigo Balerdi
7d02fc0951 base-files: fix sysupgrade for kernel-out-of-UBI
Commit ecbcc0b595 bricks devices on which the raw kernel and UBI mtd
partitions overlap.

This is the case of the ZyXEL NR7101 for example. Its OEM bootloader has
no UBI support. OpenWrt splits the stock kernel mtd partition into a raw
kernel part used by the bootloader and a UBI part used to store rootfs
and rootfs_data. Running mtd erase on the complete partition during
sysupgrade erases the UBI part and results in a soft brick.

Arguably the best solution would be to fix the partition layouts so that
kernel and UBI partitions do not overlap, also including a stock_kernel
partition to help reverting to stock firmware. This would have the added
benefit of protecting UBI from kernel images that are excessively large.

Fixes: ecbcc0b595 ("base-files: safer sysupgrade.tar for kernel-out-of-UBI")
Reported-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-05-02 12:42:15 +01:00
Rodrigo Balerdi
9ba28f978c base-files: minimize critical time in sysupgrade
Attempt to minimize the time during which an interrupted nand sysupgrade
can lead to a non-functional device by flushing caches before starting
the upgrade procedure.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-04-19 16:28:25 +01:00
Rodrigo Balerdi
9a2f08f6e7 base-files: trim unnecessary nand sysupgrade code
Remove unnecessary sync commands during nand sysupgrade.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-04-19 16:28:25 +01:00
Rodrigo Balerdi
bfd9afc38d base-files: fix issues in nand sysupgrade
Fix issues while retaining configuration during nand sysupgrade:
- abort configuration saving if data partition is not found
- generate diagnostics if saving fails (eg, because of lack of space)
- do not output "sysupgrade successful" in case of errors

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
2022-04-19 16:28:25 +01:00