Commit Graph

36 Commits

Author SHA1 Message Date
Rosen Penev
d3dad5b10b uboot-kirkwood: fix compilation with GCC14
Missing header.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16467
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-09-25 22:50:09 +02:00
Zoltan HERPAI
8619d7af67 kirkwood: add D-Link DNS-320L support
Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6702 @1GHz
 - 256Mb RAM
 - 128Mb NAND
 - 1x GbE LAN (Marvell 88E1318R)
 - 1x USB 2.0
 - 2x SATA
 - Weltrend WT69P3 ("supervisor" MCU chip)
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Notes:
 - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
 - The original MAC address is stored in the "mini firmware" image's first
   17 bytes.
 - Compared to the original MTD layout, the uImage+rootfs are now stored in
   a common ubi partition.

Installation:
1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 u-boot-dns320l/u-boot.kwb
   (Please note that "PHY reset timed out" seems to be customary
    on kirkwood devices, the egiga0 interface works regardless.)
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-06-01 01:29:09 +02:00
Zoltan HERPAI
0dfc0495fc kirkwood: add support for Netgear Stora (MS2000/2110) NAS
Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6281 @1GHz
 - 128Mb RAM
 - 256Mb NAND
 - 1x GbE LAN (Marvell 88E1116)
 - 1x USB 2.0
 - 2x SATA
 - PCF8563 RTC
 - LM75 sensor
 - TC654 PWM fan controller
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Installation:

1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 netgear_stora-u-boot.kwb
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

The fan is controlled in 3 stages by a script running every minute
from cron, measuring the CPU temperature.

Snippets taken from bodhi <mibodhi@gmail.com>

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-03-17 00:19:22 +01:00
Tianling Shen
48ed07bc0b treewide: replace AUTORELEASE with real PKG_RELEASE
Based on Paul Fertser <fercerpav@gmail.com>'s guidance:
Change AUTORELEASE in rules.mk to:
```
AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile))
```

then update all affected packages by:
```
for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';);
do
	make package/$i/clean
done
```

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-18 11:35:29 +02:00
Kuan-Yi Li
5c85c1f344
uboot-kirkwood: build with kirkwood generic subtarget
Fix image build fail by using the generic subtarget.

Fixes: cada395a ("kirkwood: add generic subtarget")
Ref: 40e3f660 ("uboot-fritz4040: build with ipq40xx generic subtarget")
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
[ add commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2022-12-25 11:55:52 +01:00
BERENYI Balazs
03d66d6b8f kirkwood: Add support for Sheevaplug
Globalscale SheevaPlug:
* Marvell Kirkwood 88F6281
* 512 MB SDRAM
* 512 MB Flash
* Gigabit Network
* USB 2.0
* SD slot
* Serial console

The device is supported in mainline uboot/linux the commit adds only
some openwrt config for building an image.

Installation:
1 - Update uboot:
setenv ipaddr '192.168.0.111'
setenv serverip '192.168.0.1'
tftpboot u-boot.kwb
nand erase 0x0 0x100000
nand write 0x800000 0x0 0x100000
reset
2 - Install OpenWRT:
setenv ethaddr 00:50:43:01:xx:xx
saveenv
setenv ipaddr '192.168.0.111'
setenv serverip '192.168.0.1'
tftpboot openwrt-kirkwood-globalscale_sheevaplug-squashfs-factory.bin
nand erase.part ubi
nand write 0x800000 ubi 0x600000
reset

Signed-off-by: BERENYI Balazs <balazs@wee.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
[add vendor name for uboot-kirkwood, merge patches, copy to 5.10,
add AUTORELEASE for uboot-kirkwood, refresh patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-06-06 19:05:07 +02:00
Kip Porterfield
6ffe8a473e kirkwood: add support for Seagate BlackArmor NAS220
The Seagate BlackArmor NAS220 is a consumer NAS
with two internal drive bays. The stock OS runs
RAID 1 over the disks via mdadm.

Device specification:
- SoC: Marvell 88F6192 800 MHz
- RAM: 128 MB
- Flash: 32 MB
- 2 x internal SATA II drives
- Ethernet: 10/100/1000 Mbps (single port, no switch)
- WLAN: None
- LED: Power, Status, Sata Activity
- Key: Power, Reset
- Serial: 10 pin header, (115200,8,N,1), 3.3V TTL
	9|x  -   x|10
	7|x  -   x|8
	5|x  - GND|6
	3|x  -  RX|4
	1|TX -   x|2
	front of case
- USB ports: 2 x USB 2.0

Flash instruction:

NOTE: this process uses a serial connection. It will upgrade the
bootloader and reset the bootloader environment variables

TFTP server setup
- Setup PC with TFTP server set the PC IP to 10.4.50.5 as TFTP server
- Copy these files to TFTP server location
    - u-boot.kwb
    - seagate_blackarmor-nas220-initramfs-uImage
    - seagate_blackarmor-nas220-squashfs-sysupgrade.bin
    - seagate_blackarmor-nas220-squashfs-factory.bin

Seagate NAS setup
- Connect LAN cable between PC and seagate device
- Connect to serial to seagate device

Install u-boot
- Boot seagate device and stop in bootloader by pressing any key
- run 'printenv' from u-boot and save the values
- tftpboot 0x2000000 u-boot.kwb
- nand erase.part uboot
- nand write 0x2000000 0x0 ${filesize}
- reset

Update MAC address in u-boot env
- Stop in u-boot by pressing any key
- Get your MAC address from your saved printenv. Is also on chassis
- setenv ethaddr <your MAC>
- saveenv

Option 1 (recommended) - Install OpenWrt via initramfs and sysupgrade
- tftpboot 0x2000000 seagate_blackarmor-nas220-initramfs-uImage
- bootm 0x2000000
- *OpenWrt should be running now, however it is not written to flash yet*
- From the running instance of OpenWrt use Luci's "flash image" feature
    from the web site or use sysupgrade from the console to write
    seagate_blackarmor-nas220-squashfs-sysupgrade.bin to flash

Option 2 - Install OpenWrt by flashing factory image from u-boot
- nand erase.part ubi
- tftpboot 0x2000000 seagate_blackarmor-nas220-squashfs-factory.bin
- nand write 0x2000000 ubi ${filesize}
- reset

Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
2020-12-22 19:11:50 +01:00
Pawel Dembicki
c881d7ab03 uboot-kirkwood: add uboot for CheckPoint L-50
This patch add u-boot for CheckPoint L-50 routers.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-07-11 13:33:28 +02:00
Pawel Dembicki
4c2e475842 uboot-kirkwood: add support for Zyxel NSA310S
This patch modifies the u-boot config for the Zyxel NSA310S to work with
OpenWrt.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-07-08 16:07:05 +02:00
Pawel Dembicki
6cafea5c5e uboot-kirkwood: update to 2020.04
Update U-Boot to current 2020.04 release for kirkwood platform.

Catch up with upstream and move some configuration options from
the header files to the corresponding defconfig files.

Compile tested: all devices
Run tested: nsa310, pogoplugv4

Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [nsa310]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-04-20 16:37:56 +02:00
Paul Wassi
dc08514e6d uboot-kirkwood: update to 2019.01
Update U-Boot to current 2019.01 release for kirkwood platform

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2019-02-17 19:22:39 +01:00
Paul Wassi
f21cd96400 uboot-kirkwood: update to 2018.03
U-Boot now requires GCC > 5

Catch up with upstream and move some configuration options from
the header files to the corresponding defconfig files.
Also move some options of patch 010 affecting the whole platform
to 010's device only.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-20 21:45:27 +01:00
Alberto Bursi
f5d267df63 uboot-kirkwood: add uboot for pogoplug v4
add an uboot able to boot a kernel in an ubi partition

This uboot also has a "recovery" feature, before
booting from flash it will try to boot a initramfs
image called "initramfs.bin" from a FAT32-formatted
USB drive connected to the USB 2.0 port.
(u-boot lacks drivers for usb 3.0 controllers)

Just rename the initramfs image and place it on
the usb drive, the uboot will load it.

In case there is no USB drive or no such file
is found, the uboot will boot from internal flash.

The whole check takes less than a second, boot times
are not impacted.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-01-09 22:06:55 +01:00
Mathias Kresin
f5df635ccf kirkwood: sync image filename with boardname
Use <manufacturer>_<modelname> as image name.

Use the BOARD_NAME variable to ensure that the former used boardname is
still used as the subdirectory name for the sysupgrade-tar image, to
not break sysupgrade from earlier versions.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Mathias Kresin
2f757f6035 uboot-kirkwood: fix default u-boot selection
Build the Seagate GoFlexHome u-boot for the Seagate GoFlexNet as well. The
name clearly indicates that the u-boot can be used for both boards

Build the Zyxel NSA310 u-boot if the NSA310B image is selected.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Mathias Kresin
0ebdf0c1d3 kirkwood: drop support for orphaned boards
No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop
support for the boards for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:54 +01:00
Paul Wassi
67da6a7c5e uboot-kirkwood: update to 2017.09
Upgrade uboot-kirkwood to upstream release 2017.09
Catch up with upstream and move configuration options from
simple defines to Kconfig, as otherwise dependencies would
not be resolved and code would not compile.

Tested-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-11-03 20:04:52 +01:00
Paul Wassi
c95c3165b9 package/boot: update uboot-kirkwood to 2017.03
Bump uboot-kirkwood to upstream release 2017.03

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-20 08:19:35 +01:00
Alberto Bursi
add1dd0081 uboot-kirkwood: add Zyxel NSA325 uboot
add uboot for NSA325

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Felix Fietkau
04cc026a7e uboot-kirkwood: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Alberto Bursi
3d1b2b22d6 uboot-kirkwood: add uboot for nsa310b
this commit allows to make a standalone u-boot for nsa310b.

While both first-stage and second-stage u-boot work fine if
installed to flash or loaded with kwboot,
I could not get stock u-boot nor bodhi's u-boot to chainload
any second stage u-boot (I also tried with dockstar's uboot
that works fine on this device if loaded with kwboot).

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-24 16:21:24 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Paul Wassi
705240eeb5 uboot-kirkwood: bump to upstream 2016.09.01
Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches
cleaned up and reworked.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-27 12:44:54 +02:00
Luka Perkov
c595a59680 uboot-kirkwood: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43436
2014-11-30 03:55:44 +00:00
Luka Perkov
44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
Luka Perkov
ead1765057 uboot-kirkwood: bump to 2014.07
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42080
2014-08-08 15:55:03 +00:00
Luka Perkov
d3fc4fbd74 uboot-kirkwood: re-add Pogoplug E02 support
This patch modifies the u-boot config for the Pogoplug E02 to work with
OpenWrt. It also enables building a second stage bootloader image.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40828
2014-05-23 08:17:01 +00:00
Luka Perkov
44c890b6f1 uboot-kirkwood: update to 2014.04
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40804
2014-05-20 12:45:02 +00:00
Luka Perkov
ddcd83e3df uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39594
2014-02-16 00:14:26 +00:00
Luka Perkov
777e7c3ff5 uboot-kirkwood: update to 2013.10
Tested on:

 * Cloud Engines Pogoplug E02
 * RaidSonic ICY BOX IB-NAS62x0
 * Iomega Iconnect

Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.

Sample ib62x0 commands for running second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000

Sample ib62x0 commands for flashing second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000

While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39590
2014-02-15 23:53:07 +00:00
Felix Fietkau
e31ccd95c7 u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38559
2013-10-28 15:15:05 +00:00
Luka Perkov
769c322cd0 uboot-kirkwood: build in $(BUILD_DIR)
SVN-Revision: 34401
2012-11-29 01:04:37 +00:00
Luka Perkov
702f2590ea uboot-kirkwood: update to 2012.10
SVN-Revision: 34303
2012-11-22 21:16:04 +00:00
John Crispin
e75106aa0d move boot related packages to their own folder
SVN-Revision: 33781
2012-10-16 13:44:25 +00:00