Commit Graph

21600 Commits

Author SHA1 Message Date
Martin Schiller
c5829788c9 lantiq: add set_port_link feature to xrx200-net driver
This makes it possible to configure the link attributes (aneg, duplex,
speed) of each switch ports.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2019-10-12 23:43:08 +02:00
Scott Roberts
d2a1075973 mvebu: backport mvneta and comphy from linux 5.x
These patches backport support for the ARMADA 3700 COMPHY driver.
Also backported is the mvneta driver.  This will allow switching
the SGMII speed using SMC calls.  To support this you must update
the firmware using Marvells 18.12 version (this has now been
upstreamed).  The mvneta driver allows 2500basex and 2500baset.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
2019-10-12 23:43:08 +02:00
Eubert Bao
e11fc8439c kirkwood: Fix FS#505 - Can't install LEDE on Linksys EA3500
The default sizes render Device/linksys_audi mage un-flashable.
Restore the pagesize, subpagesize, and blocksize for linksys_audi
from https://github.com/openwrt/archive.

Signed-off-by: Eubert Bao <bunnier@gmail.com>
2019-10-12 23:42:59 +02:00
Moritz Warning
66fbaae83e pistachio: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-10-12 23:37:00 +02:00
Sungbo Eo
b83b2d76ca ar71xx: remove unnecessary execute permission bit
.c files do not need to be executable. 644 is enough.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-10-12 23:37:00 +02:00
Sungbo Eo
68014f6d6e mediatek: remove unnecessary execute permission bit
kernel config and dts files do not need to be executable. 644 is enough.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-10-12 23:37:00 +02:00
Hauke Mehrtens
ace1bfb554 mvebu: Refresh kernel 4.19 configuration
This refreshes the kernel 4.19 configuration, it looks like this was not
done initially.

When did a compile with the default settings I had to select some
kernel configuration options.

Fixes: 98684d99b2 ("mvebu: add kernel 4.19 support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-10-12 23:37:00 +02:00
Hauke Mehrtens
e901ce6f0e kernel: Set GCC version to 80300 by default
The kernel 4.19 configuration contains the GCC version used, set it to
8.3.0 as this is now our default compiler.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-10-12 22:38:02 +02:00
Moritz Warning
c3ffb0e7d5
brcm47xx: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-10-12 01:43:07 +02:00
Moritz Warning
f3c21d1517
omap: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-10-12 01:22:46 +02:00
Oldřich Jedlička
e0ce80d42a kernel: Fix off-by-one error in FIT mtd partition search.
This fixes off-by-one error introduced in commit dc76900021
("kernel: Correctly search for the FIT image in mtd partition.")

Function `mtd_read` starts reading at `offset` and
needs `hdr_len` number of bytes to be available. Suppose
the easiest case when `offset` is `0` and `hdr_len` equals
to `mtd->size` - the `for` loop will not be entered even
when enough bytes are available to be read.

Same happens for any non-zero `offset`, when `hdr_len` is
just enough bytes to be read until `mtd->size` is reached.
Imagine that for example `mtd->size=5`, `offset=4` and
`hdr_len=1`. Then `offset+hdr_len=5` and the check has to
be `offset+hdr_len <= mtd->size`, i.e. `5 <= 5`. The
check for `offset + hdr_len` value needs to be inclusive,
therefore use `<=`.

Fixes: dc76900021 ("kernel: Correctly search for the FIT image in mtd partition.")
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
[adjusted commit ref, fixes tag]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-10-09 14:45:25 +02:00
Martin Schiller
b204fcdb07 target/imagebuilder: use multi-thread support for xz compression
This speeds up the packing of the imagebuilder a lot:

 imagebuilder-T0.tar.xz real 0m25.199s user 2m45.967s sys 0m1.218s
 imagebuilder-T1.tar.xz real 2m02.543s user 2m02.418s sys 0m1.653s
 imagebuilder-T2.tar.xz real 1m03.684s user 1m59.931s sys 0m0.587s
 imagebuilder-T3.tar.xz real 0m48.033s user 2m02.904s sys 0m0.637s
 imagebuilder-T4.tar.xz real 0m38.963s user 2m15.521s sys 0m0.783s
 imagebuilder-T5.tar.xz real 0m37.994s user 2m21.461s sys 0m0.919s
 imagebuilder-T6.tar.xz real 0m39.524s user 2m48.115s sys 0m1.279s
 imagebuilder-T7.tar.xz real 0m34.061s user 2m45.097s sys 0m1.174s
 imagebuilder-T8.tar.xz real 0m27.286s user 2m55.449s sys 0m1.329s
 imagebuilder-T9.tar.xz real 0m25.205s user 2m44.894s sys 0m1.208s

To keep the output reproducible in any case, we enforce a minimum amount
of 2 threads.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[refactored into reusable NPROC var, more verbose commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-10-09 09:13:44 +02:00
Koen Vandeputte
8184429b7b kernel: bump 4.19 to 4.19.78
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 15:51:06 +02:00
Koen Vandeputte
4648533ca4 kernel: bump 4.14 to 4.14.148
Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 15:51:06 +02:00
Koen Vandeputte
f516ce3b10 kernel: bump 4.9 to 4.9.196
Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 15:51:06 +02:00
Koen Vandeputte
8e197c7af2 kernel: bump 4.19 to 4.19.77
Refreshed all patches.

Remove upstreamed:
- 110-ARM-zynq-Use-memcpy_toio-instead-of-memcpy.patch

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 12:44:35 +02:00
Koen Vandeputte
9b04a7576b kernel: bump 4.14 to 4.14.147
Refreshed all patches.

Altered patches:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ar71xx)
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ath79)

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 12:44:35 +02:00
Koen Vandeputte
65fad9fec5 kernel: bump 4.9 to 4.9.195
Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-08 12:44:35 +02:00
Adrian Schmutzler
273a6cb562 ath79: improve DTS for TP-Link Archer D50 v1
This addresses several issues in the DTS file:
- add diag LED support
- remove unused node names
- fix whitespace issues

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-06 22:42:30 +02:00
Davide Fioravanti
67d019ac94 ramips: enable LED VCC for Asus RT-AC51U
Previously only the power LED was working.
With this patch all leds except 5GHz are working.

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
[rephrased commit title, drop status property]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-06 21:28:49 +02:00
Adrian Schmutzler
929becbc2d ath79: fix whitespace issues in DTS files
This is the result of grepping/searching for several common
whitespace issues like double empty lines, leading spaces, etc.

This patch fixes them for the ath79 target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-06 21:28:49 +02:00
Adrian Schmutzler
794d4b6652 treewide: remove kmod-usb-core from DEVICE_PACKAGES
This removes _all_ occurrences of kmod-usb-core from
DEVICE_PACKAGES and similar variables.

This package is pulled as dependency by one of the following
packages in any case:
- kmod-usb-chipidea
- kmod-usb-dwc2
- kmod-usb-ledtrig-usbport
- kmod-usb-ohci
- kmod-usb2
- kmod-usb2-pci
- kmod-usb3

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[remove kmod-usb-core from EnGenius ESR600]
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-06 21:28:49 +02:00
Andre Heider
3b874c2c81 sunxi: update kernel config
This is just a `make kernel_oldconfig` run without further changes.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-10-06 21:28:49 +02:00
Koen Vandeputte
7449a39c0e kernel: bump 4.19 to 4.19.76
Refreshed all patches.

Altered patches:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch

Compile-tested on: ath79, cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-10-04 15:48:28 +02:00
Rafał Miłecki
fedc5b65dc bcm53xx: fix serial console on Luxul XWC-2000
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 15:46:23 +02:00
Rafał Miłecki
64b7dbb300 bcm53xx: fix sysupgrade for Luxul XWC-2000
Use a correct "compatible" value as in the upstream DTS file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 11:41:32 +02:00
Rafał Miłecki
06091afada bcm53xx: add pending patch adding Luxul XWC-2000 DTS file
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-10-04 10:07:00 +02:00
Jeff Kletsky
eba0db95b5 ath79: Restore GL.iNet GL-AR300M-Lite first-boot connectivity
The relationship between GMAC0 and GMAC1 and the kernel devices
eth0 and eth1 was reversed for many ath79 devices by commit 8dde11d521
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi

The GL-AR300M-Lite is a single-port device, with the "LAN" port of the
GL-AR300M board unpopulated and its sole port now referenced as eth1,
as a result of commit 8dde11d521. The device was unreachable on
first boot or fresh config.

By changing &eth1 (GMAC1) to an MFD, GMAC0 is able to associate with
the phy and is known by the kernel as "eth0".

Thanks to Chuanhong Guo for the suggestion of "simple-mfd"

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-09-29 00:46:14 +02:00
Jeff Kletsky
474b69475d ath79: Correct glinet, gl-ar300m-lite in 02_network
Previously, the board name for the GL-AR300M-Lite was incorrect
in 02_network, resulting in an unintended, fall-through condition
when initializing the network configuration.

While builds prior to commit 8dde11d521 (merged June 5, 2019)
    ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
functioned properly, the error was noted in resolving first-boot
connectivity issues related to the single-phy nature of the device
and the "swap" of eth0 and eth1 related to that commit.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-09-29 00:46:14 +02:00
Adrian Schmutzler
22e876fdb0 ramips: add label MAC address for Asus RT-AC85P
The label shows the MAC address of 2.4 GHz WiFi.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
0aab49d234 treewide: fix hex2dec conversion for MAC address checksum offset
If chksum_offset is converted by $(($...)) at the beginning, the
check [ -n "$chksum_offset" ] will always return true, as the
conversion yields "0" for an empty argument, and [ -n "0" ] is
true.

With this patch, the variable is not converted before the check,
but only when it's used in dd.

No conversion is done for use in hexdump, as this can deal with
hex value offsets.

Fixes: b133e466b0 ("treewide: convert WiFi caldata size and offset to hexadecimal")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
c5b4fa20fa treewide: replace backticks by $(...) in gen_*_img.sh scripts
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
0bbfc3dff7 octeon: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
aea3cab77a lantiq: replace backticks by $(...) and remove useless echo
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
a421a12f9c orion: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
81c52edf2b mvebu: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Eneas U de Queiroz
9de9e9c6c5 ipq806x: remove unsupported hw-crypto qce driver
The following symbols, selected by the qce driver were removed:
	CONFIG_CRYPTO_CBC
	CONFIG_CRYPTO_CTR
	CONFIG_CRYPTO_DES
	CONFIG_CRYPTO_DEV_QCE
	CONFIG_CRYPTO_ECB
	CONFIG_CRYPTO_NULL
	CONFIG_CRYPTO_SEQIV
	CONFIG_CRYPTO_XTS

CONFIG_CRYPTO_GF128MUL was removed as well, since it is only needed by
some cipher modes (LRW, GCM), none of which are selected, and it is
packaged as a module.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2019-09-29 00:46:13 +02:00
Christian Lamparter
95f2bb24be apm821xx: fix fan control on highest step
This patch removes a typo (extra "0") so that the 'cpu-alert6'
step is triggered once the system reaches 85°C.

Note: Unless the WNDR4700 is placed in an hot oven, the
hardware-monitor will never reach this value.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Adrian Schmutzler
400e56d22c ramips: apply consistent device name/compatible to ZBT-WE1026-5G
All Zbtlink ramips devices except the ZBT-WE1026-5G include the
zbt-/ZBT- prefix in their model name.

This changes ZBT-WE1026-5G to also follow that scheme.

The patch moves some block to keep alphatical order.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-29 00:08:20 +02:00
Adrian Schmutzler
b376818f97 ramips: harmonize device vendor Zbtlink
Spelling of Zbtlink varies across image definitions and DTS files.

This patch uses Zbtlink consistently and also updates the model
in DTS files to contain the vendor in all cases.

This patch is cosmetical, as there should be no dependencies on
device model name in ramips anymore.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-29 00:08:20 +02:00
Rafał Miłecki
9d95d5e799 brcm47xx: sysupgrade: fix device model detection
$(board_name) was providing content on "boardtype" (and optionally
"boardnum") NVRAM values. That function requires & expects more specific
and detailed model name extracted from the /proc/cpuinfo.

Fixes: f12a32630f ("treewide: use the generic board_name function")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-09-26 06:51:16 +02:00
Adrian Schmutzler
fddea2030e ath79: remove redundant ucidef_set_interfaces_* calls in 02_network
If already included in ucidef_add_switch, you do not have to
additionally set the interface mode in ucidef_set_interfaces_*
functions.

This patch removes/adjusts such redundant cases.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-25 22:42:03 +02:00
Adrian Schmutzler
724875b8d0 ramips: merge cases in 02_network
This merges three cases with a single switch port.

6t@eth0 and 6@eth0 should be equivalent.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-25 22:42:03 +02:00
David Bauer
e2c084cabc ipq40xx: abort ar40xx probe on missing PHYs
The ar40xx driver currently panics in case no QCA807x PHY has been
successfully probed. This happens when the external PHY is still
in reset when probing the ar40xx switch driver.

Note that this patch does not fix the root cause, ar40xx_probe now
simply fails instead of causing a kernel panic due to a nullpointer
dereference.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-09-25 22:42:03 +02:00
Felix Fietkau
c8933ce533 kernel: fix issues with output routing in flow offload
Replace an old cleanup patch that never made it upstream with the proper
upstream fix. This patch was incompatible with the recent changes that
affected the way that the flow tuple dst entry was used.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-25 20:11:20 +02:00
Felix Fietkau
442ecce761 kernel: port 4.19 xt_FLOWOFFLOAD changes to 4.14
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-25 18:16:39 +02:00
Felix Fietkau
a438eac9ac kernel: port another missing upstream change to xt_FLOWOFFLOAD on 4.19
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-25 18:16:39 +02:00
Moritz Warning
661e37ccea layerscape: split up DEVICE_TITLE definitions
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-09-25 12:50:24 +02:00
Linus Walleij
19f722adef gemini: dir685: Restore graphics
One of the v4.19 patches had a bug, this is fixed upstream,
but in OpenWrt we can fix it by just fixing the bug in the
patch.

We also need to augment the config file to select the
CONFIG_DRM_FBDEV_EMULATION symbol.

This restores the display controller on the DIR-685 to
working state: penguin and graphics on the little screen
with default OpenWrt install.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-25 12:50:24 +02:00
Felix Fietkau
3c14e384b7 kernel: update and fix xt_FLOWOFFLOAD target on 4.19
Merge upstream changes to nft_flow_offload.
Fixes offloading

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-25 11:10:33 +02:00