Shiji Yang
01996b785d
ramips: clean up useless dts partition labels
...
The previous NVMEM eeprom conversions[1][2] left a lot of partition
labels that were no longer used. They can be removed now.
[1] https://github.com/openwrt/openwrt/pull/13584
[2] https://github.com/openwrt/openwrt/pull/13587
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-21 13:31:18 +01:00
Christian Marangi
7630c052c4
ramips: drop redundant label with new LED color/function format
...
Drop redundant label with new LED color/function format declared.
This was needed previously when the new format wasn't supported by
leds.sh functions script. Now that is supported this property
can be removed in favor of the new format.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00
Rosen Penev
f4c33d098f
ramips: mt7621: convert to nvmem-layout
...
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-26 01:30:32 +01:00
Shiji Yang
65cd6a6fec
ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621
...
This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM
format. The EEPROM size is 0x4da8.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00
Shiji Yang
fb4cea45ec
ramips: convert MT7603 EEPROM to NVMEM format
...
This patch converts MT7603 WiFi calibration data to NVMEM format. The
EEPROM size is 0x400.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00
Alexey Kosmakov
a664d39c5b
ramips: add support for SNR SNR-CPE-ME2-Lite
...
SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4 GHz 2T2R (MediaTek MT7603E)
5 GHz 2T2R (MediaTek MT7613BE)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX
- 57600n8
- Power : 12 VDC, 1.5 A
Flash instruction via WEB (firmware 1.10.4 and later)
1. Boot SNR-CPE-ME2-Lite normally with "Router" mode
2. Access to "http://192.168.1.1/ " and open "Administration -> Management" page
3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button
4. Wait ~120 seconds to complete flashing
Flash instruction via TFTP (all version):
1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on)
2. Send firmware via TFTP client:
TFTP Server address: 192.168.1.1
TFTP Client address: 192.168.1.131
3. Wait ~120 seconds to complete flashing
Signed-off-by: Alexey Kosmakov <a.kosmakov@nagtech.ru>
2022-10-02 20:21:55 +02:00
