Rosen Penev
6280b4abfb
mvebu: devm for mutex_init
...
It's common to avoid calling mutex_destroy when done. It's not correct
strictly speaking.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16753
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-23 17:19:56 +01:00
John Audia
51bbc8114b
kernel: bump 6.6 to 6.6.57
...
1. Update target/linux/generic/config-6.6 for new ksym
2. Refresh patches
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.57
Added:
generic/backport-6.6/777-netfilter-xtables-fix-typo-causing-some-targets-to-not-load-on-IPv6.patch[1]
Manually rebased:
generic/hack-6.6/645-netfilter-connmark-introduce-set-dscpmark.patch
Removed upstreamed:
gemini/patches-6.6/0001-net-ethernet-cortina-Drop-TSO-support.patch[2]
gemini/patches-6.6/0004-net-ethernet-cortina-Restore-TSO-support.patch[3]
All other patches automatically rebased.
1. https://lore.kernel.org/all/20241019-xtables-typos-v2-1-6b8b1735dc8e@0upti.me/
2 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.57&id=452c0740d72c6a77a41f6ddc318a48f18c3d2346
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.57&id=611f74b0e7fb93ee2366d9d7edca546806b220e9
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16726
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-19 16:21:32 +02:00
Marek Behún
35aa38540a
mvebu: 6.6: Backport Turris Omnia MCU patches from 6.11
...
This backports patches
dt-bindings: firmware: add cznic,turris-omnia-mcu binding
platform: cznic: Add preliminary support for Turris Omnia MCU
platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
ARM: dts: turris-omnia: Add MCU system-controller node
ARM: dts: turris-omnia: Add GPIO key node for front button
platform: cznic: turris-omnia-mcu: Depend on OF
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
that will be released in 6.11 into mvebu/patches-6.6.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://github.com/openwrt/openwrt/pull/13799
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-08-02 22:11:05 +02:00
John Audia
3711557bdf
kernel: bump 6.6 to 6.6.36
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.36
Manually rebased:
generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch
bcm27xx/patches-6.6/950-0536-dmaengine-dw-axi-dmac-Fixes-for-RP1.patch
Removed upstreamed:
bmips/patches-6.6/010-v6.10-mips-bmips-BCM6358-make-sure-CBR-is-correctly-set.patch[1]
All other patches automatically rebased.
1. 7c9644a7b5
2024-07-04 22:07:10 +02:00
John Audia
a09a72d86d
kernel: bump 6.6 to 6.6.34
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.34
Removed upstreamed:
backport-6.6/701-v6.8-net-sfp-bus-fix-SFP-mode-detect-from-bitrate.patch[1]
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.34&id=9399baa02e4b7f101c39fdbc4d681d54bca4465b
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-06-20 01:55:19 +02:00
Daniel Golle
ac783b419b
mvebu: improve thermal management of IEI Puzzle devices
...
- Make step_wise thermal governor respect hysteresis
This is done by importing a downstream patch, backporting the same feature
now present in Linux v6.10+ would be too messy.
- Introduce thermal zone for the WT61P803 uC (chassis and board sensors)
- Introduce thermal zones for AQR NBase-T PHYs
- No longer modify existing SoC thermal zones (which are now only in charge
for emergency shutdown, and can be interrupt driven instead of polled)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-06-01 16:40:10 +01:00
John Audia
dceb5938f8
kernel: bump 6.6 to 6.6.29
...
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.29
Removed upstreamed:
generic/backport-6.6/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch[1]
generic/backport-6.6/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch[2]
generic/backport-6.6/790-29-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch[3]
generic/backport-6.6/790-31-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch[4]
generic/backport-6.6/790-34-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch[5]
generic/backport-6.6/790-35-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch[6]
mediatek/patches-6.6/963-net-ethernet-mtk_eth_soc-fix-WED-wifi-reset.patch[7]
Manually rebased:
generic/backport-6.6/790-23-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=a2471d271042ea18e8a6babc132a8716bb2f08b9
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=4ed82dd368ad883dc4284292937b882f044e625d
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=21b9d89d93422221cdda1b82fd075fa3c94a11d9
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=bd41ee1efd478852a0882ce5f136bc2b5e83eff2
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=d1be3960539249a8690ed09a29d0e3bf34189dd2
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=f8de1b6208bf71bd3102548d33dd8475573ad2ea
7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.29&id=6855f724f19620c3ddff57c349e0abba797475b1
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
2024-04-28 21:51:03 +02:00
Robert Marko
7a78b22dc8
mvebu: 6.6: refresh patches
...
Well, it seems that we have a patch that was not refreshed and CI is
complaining, so refresh it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-04-03 18:42:26 +02:00
Stijn Segers
2260ec4fb7
mvebu: 6.6: refresh patches
...
Manually refreshed:
* 309-linksys-status-led.patch
* 310-linksys-use-eth0-as-cpu-port.patch
* 320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch
* 701-mvpp2-read-mac-address-from-nvmem.patch
* 902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch
All other patches automatically refreshed.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2024-04-03 17:49:53 +02:00
Stijn Segers
ad5e73fe0a
mvebu: 6.6: remove upstreamed patches
...
000-cpufreq-armada-8k-add-ap807-support.patch was upstreamed.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2024-04-03 17:49:53 +02:00
Stijn Segers
20024ab7c3
mvebu: 6.6: adjust 32 bit ARM DTS path
...
As of 6.6, all upstream DTSes are moved to their respective vendor subdir.
OpenWrt already followed this practice for ARM64, but not yet for 32 bit
ARM (Armada 37x/38x).
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2024-04-03 17:49:53 +02:00
Stijn Segers
4671a92de3
mvebu: 6.6: copy files, patches & configs from 6.1
...
Copy all mvebu 6.1 specific files, patches and configs to 6.1.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2024-04-03 17:49:53 +02:00
