Commit Graph

928 Commits

Author SHA1 Message Date
Imre Kaloz
c5e5e70ab0 it's time to break the barriers
SVN-Revision: 33666
2012-10-08 13:12:37 +00:00
Felix Fietkau
c7c649126f base-files: remove obsolete entries from sysctl.conf (#12236)
SVN-Revision: 33532
2012-09-24 15:24:01 +00:00
Florian Fainelli
78f4cf3d70 base-files: release an attached loop device on umounting
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 33477
2012-09-19 15:13:44 +00:00
Jo-Philipp Wich
2165240c32 base-files: make file compare silent in migrate-sysctl
SVN-Revision: 33449
2012-09-17 18:36:51 +00:00
Jo-Philipp Wich
0fd1fb6252 base-files: add uci-defaults script to migrate sysctl.conf (#12196)
SVN-Revision: 33448
2012-09-17 17:15:56 +00:00
Jo-Philipp Wich
dac5ed38b6 base-files: remove route enabled check in lib/functions/network.sh after netifd bump
SVN-Revision: 33391
2012-09-13 08:47:10 +00:00
Gabor Juhos
ca857b7a50 base-files: uci-defaults for rssileds
Adds capability to add uci-defaults defining RSSI LEDs

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33164
2012-08-13 14:01:37 +00:00
Jo-Philipp Wich
70aaa116eb base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf
SVN-Revision: 33147
2012-08-12 13:20:27 +00:00
Florian Fainelli
fb9023bb8a move LIB_SUFFIX from base-files to rules.mk
Some packages are going to need fixups based on LIB_SUFFIX

SVN-Revision: 33080
2012-08-10 14:15:06 +00:00
Jo-Philipp Wich
17dc1d5c44 base-files: fix option parsing of -F/--force parameter
SVN-Revision: 33075
2012-08-09 18:30:47 +00:00
Florian Fainelli
31e46b4293 base-files: check for ldd presence and executability (#11991)
SVN-Revision: 33057
2012-08-08 15:37:34 +00:00
Florian Fainelli
6afd1725f1 base-files: fix detection of standalone ldd
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
Vasilis Tsiligiannis
9ab1df3f48 base-files: Modernize hotplug2 rules (#11368)
SVN-Revision: 32711
2012-07-14 19:59:44 +00:00
Jo-Philipp Wich
ff3161a6c4 base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it
SVN-Revision: 32587
2012-07-03 15:43:43 +00:00
Jo-Philipp Wich
b2e5c5f82e base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
SVN-Revision: 32531
2012-06-29 19:04:11 +00:00
Jo-Philipp Wich
e654014352 base-files: only consider enabled default routes when finding the wan iface (#11774)
SVN-Revision: 32525
2012-06-29 11:58:35 +00:00
Felix Fietkau
6c2a295245 base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.

Lastly sack/dsack help on recovery from larger amounts of packet
loss.

SVN-Revision: 32513
2012-06-27 22:32:44 +00:00
Jo-Philipp Wich
f2dde4f5ba base-files: allow wireless ifaces to be part of multiple networks
SVN-Revision: 32503
2012-06-26 15:25:33 +00:00
Felix Fietkau
3143f03568 toolchain: move eglibc-files from base-files to toolchain, it is packaged as part of the libc package
SVN-Revision: 32467
2012-06-20 13:45:01 +00:00
Jo-Philipp Wich
57a7257569 base-files: implement network_get_gateway(), network_get_gateway6(), network_find_wan() and network_find_wan6() in /lib/functions/network.sh
SVN-Revision: 32397
2012-06-17 11:50:50 +00:00
Jo-Philipp Wich
bfe966574f base-files: enable shell tracing in initscripts when INIT_TRACE is set
SVN-Revision: 32340
2012-06-13 17:10:41 +00:00
Felix Fietkau
9a1d6f0678 base-files: override Build/Compile/Default instead of Build/Compile (fixes #11667)
SVN-Revision: 32339
2012-06-13 16:25:29 +00:00
Felix Fietkau
07826e391d base-files: move all toolchain packages to a separate package directory 'toolchain'
SVN-Revision: 32169
2012-06-10 20:27:30 +00:00
Jo-Philipp Wich
9869b4da3c base-files: implement network_defer_device() and network_ready_device() wrappers for upcoming netifd iface deferring support
SVN-Revision: 32106
2012-06-07 14:55:26 +00:00
Jo-Philipp Wich
6cdf25289c base-files: add permission exceptions, do not clobber shadow permissions - based on patch by Mark Mentovai <mark@moxienet.com>
SVN-Revision: 32073
2012-06-05 18:02:00 +00:00
Jo-Philipp Wich
5e84df6bac base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time
SVN-Revision: 32064
2012-06-05 17:48:41 +00:00
Jo-Philipp Wich
a044a43d06 base-files: make user_add() populate the shadow db as well
SVN-Revision: 32063
2012-06-05 17:40:32 +00:00
Jo-Philipp Wich
9ae901445b /etc/functions.sh => /lib/functions.sh
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
Gabor Juhos
eca7502dfd base-files: add LED specific functions to /lib/functions/uci-defaults
SVN-Revision: 31991
2012-05-29 16:39:16 +00:00
Felix Fietkau
8a9e94b077 base-files: remove base-files-network, netifd is the only supported option now
SVN-Revision: 31980
2012-05-29 12:59:03 +00:00
Jo-Philipp Wich
c11151bc70 base-files: add network_is_up()
SVN-Revision: 31978
2012-05-29 02:03:25 +00:00
Jo-Philipp Wich
bf52cbf108 base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable)
SVN-Revision: 31960
2012-05-29 00:20:16 +00:00
Jo-Philipp Wich
8ef9450b37 base-files: add network_get_device() to network.sh
SVN-Revision: 31937
2012-05-28 03:24:56 +00:00
Jo-Philipp Wich
f1d04190c5 base-files: introduce /lib/functions/network.sh This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface.
SVN-Revision: 31935
2012-05-28 03:15:02 +00:00
Felix Fietkau
166db84309 base-files: kill ubusd and udhcpc on sysupgrade as well
SVN-Revision: 31852
2012-05-23 21:54:12 +00:00
Felix Fietkau
5d6628a88c base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade
SVN-Revision: 31851
2012-05-23 21:49:31 +00:00
Gabor Juhos
6aec1d72c2 package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade
SVN-Revision: 31842
2012-05-23 21:05:20 +00:00
Felix Fietkau
5eed1d8f6b enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
SVN-Revision: 31730
2012-05-14 23:33:35 +00:00
Jonas Gorski
80650c9475 base-files: wait for wifi modules to settle
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.

This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.

SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
Mirko Vogt
232b7aa65b remove special treatment when using glibc - support got dropped
SVN-Revision: 31504
2012-04-28 22:24:16 +00:00
Mirko Vogt
334fd4199b purge support for glibc - use eglibc instead!
for reference: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg13425.html

SVN-Revision: 31503
2012-04-28 22:24:12 +00:00
Florian Fainelli
129afe12b7 base-files: fix typo in 05_firstboot_skip script (#11359)
SVN-Revision: 31492
2012-04-27 16:49:16 +00:00
Felix Fietkau
3678ba60ca base-files: rename internal variables in config_foreach to make namespace conflicts more unlikely
SVN-Revision: 31431
2012-04-21 20:34:45 +00:00
Jo-Philipp Wich
3c4165a305 enable ntpd server for busybox
hi

Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1,  ntpd will answer with the time of the router)

I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)

 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option?  Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
Jo-Philipp Wich
b4312a8ba1 base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled (#11280)
SVN-Revision: 31289
2012-04-15 15:21:55 +00:00
Jo-Philipp Wich
d8540259ca base-file: cleanup white space in Kconfig source
SVN-Revision: 31267
2012-04-12 23:01:39 +00:00
Jo-Philipp Wich
a43ae30e1b include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
The available placeholders are:
 %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
 %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
 %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
 %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
 %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
 %v .. Like %V, but all characters made lowercase and spaces substituted with "_"
 %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
 %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
 %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages"
 %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
 %T .. Replace with the current target (e.g. "ar71xx")
 %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")

SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
Jo-Philipp Wich
3c3941f109 base-files: remove network preconfig, it collides with ar71xx network firstboot uci-defaults To supply custom network settings, it is better to embed a complete network config file using the files/ overlay, the old image lan preconfig options are also very limited in scope and actually collide with sysupgrade and firstboot hardware detection on at least ar71xx and possibly other targets, therfore drop this facility.
SVN-Revision: 31258
2012-04-12 09:43:44 +00:00
Felix Fietkau
6f46704743 base-files: split service related functions off to /lib/functions/service.sh
SVN-Revision: 31042
2012-03-20 14:29:50 +00:00
Jo-Philipp Wich
5fdd1f4bd7 Add munin to /etc/services
The muninlite postinst fails to add munin to /etc/services.

This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 30982
2012-03-18 19:41:57 +00:00
Felix Fietkau
5744d736f2 base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
Jo-Philipp Wich
086cae30ce base-files: enable conntrack accounting in sysctl. It used to be a compile time option which got deprecated
SVN-Revision: 30805
2012-03-04 14:53:17 +00:00
Gabor Juhos
6c61d7cbf1 base-files: remove trailing whitespaces from lib/functions/boot.sh
SVN-Revision: 30776
2012-03-02 11:17:30 +00:00
Gabor Juhos
8ae051799a base-files: remove trailing whitespaces from lib/functions.sh
SVN-Revision: 30775
2012-03-02 11:17:29 +00:00
Jo-Philipp Wich
6b9bf71881 base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed
SVN-Revision: 29865
2012-01-22 22:25:42 +00:00
Felix Fietkau
a963a80a38 base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
Jo-Philipp Wich
9fd3886365 base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
Jo-Philipp Wich
4e88bcfb00 base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones
SVN-Revision: 29688
2012-01-08 15:30:37 +00:00
Gabor Juhos
ff89832fdb package/base-files: add support for the switch LED trigger
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
Gabor Juhos
3f85c52a3a package/base-files: use case statement in led init script
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
Jo-Philipp Wich
1c6821b42e base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
SVN-Revision: 29587
2011-12-20 17:25:15 +00:00
Gabor Juhos
561f4d2840 base-files: add lib/functions/uci-defaults.sh
SVN-Revision: 29384
2011-12-01 22:48:46 +00:00
Jo-Philipp Wich
d46e17548b base-files: kill remaining processes after running user hooks (#10461)
SVN-Revision: 29256
2011-11-19 16:50:25 +00:00
Jo-Philipp Wich
010e58d209 base-files: another empty password check fix (#10440)
SVN-Revision: 29208
2011-11-17 09:40:06 +00:00
Jo-Philipp Wich
33443d2a8c base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
Jo-Philipp Wich
6d80ce78f1 base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only
SVN-Revision: 29187
2011-11-16 15:01:18 +00:00
Jo-Philipp Wich
8b20bfafdf base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.
SVN-Revision: 29130
2011-11-14 19:02:01 +00:00
Nicolas Thill
b49aed1520 package/base-files: enhance service functions
* allow matching process by name (useful for processes changing it)
 * check if first argument is executable
 * fix function name used in error messages

SVN-Revision: 28991
2011-11-12 13:53:15 +00:00
Jo-Philipp Wich
20ff304ed9 base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
SVN-Revision: 28943
2011-11-11 13:25:31 +00:00
Imre Kaloz
28039aea90 nuke another 2.4 skeleton
SVN-Revision: 28937
2011-11-10 13:39:06 +00:00
Imre Kaloz
7944b6fa32 enable and use shadow passwords by default
SVN-Revision: 28936
2011-11-10 12:55:01 +00:00
Imre Kaloz
55ac529951 the empty root password should be empty ;)
SVN-Revision: 28935
2011-11-10 12:47:50 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Nicolas Thill
f371d516bf package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions
SVN-Revision: 28871
2011-11-09 00:23:58 +00:00
Nicolas Thill
62a2827ea7 package/base-files: /lib/functions.sh: let service_stop exit early if no matching process to stop where found
SVN-Revision: 28870
2011-11-08 23:35:13 +00:00
Nicolas Thill
b7b56df707 package/base-files: enhance & cleanup service wrappers
* add service_check function for checking if a process is alive
 * add service_signal for sending arbitrary signals to a process
 * change service_stop to send a TERM signal first, wait for the process to die and send a KILL signal if it doen't
 * have service_kill print a warning on STDERR stating it has been deprecated

SVN-Revision: 28865
2011-11-08 22:47:49 +00:00
Nicolas Thill
d0659ce37e package/base-files: move service* functions from /etc/rc.common to /lib/functions.sh
SVN-Revision: 28864
2011-11-08 22:47:41 +00:00
Jo-Philipp Wich
7e3b6aa1f1 base-files: do not kill udhcpc on sysupgrade, it will tear down the interface if terminated
SVN-Revision: 28863
2011-11-08 19:14:55 +00:00
Jo-Philipp Wich
daca6a6a97 base-files: do not assume that "top" is busybox' top, but try to call the applet explicitely
SVN-Revision: 28862
2011-11-08 18:48:38 +00:00
Jo-Philipp Wich
a73fffe857 base-files: properly handle wifi ifaces with no network attached, useful for unmanaged interfaces like used for batman or monitoring
SVN-Revision: 28860
2011-11-08 14:42:58 +00:00
Nicolas Thill
b6aef59ea8 package/base-files: move /etc/functions.sh to /lib/functions.sh
SVN-Revision: 28857
2011-11-08 14:14:29 +00:00
Nicolas Thill
93886bc776 package/base-files: use new service wrapper
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
Nicolas Thill
10a03275bf package/base-files: /etc/rc.common: add service wrapper around start-stop-daemon
SVN-Revision: 28834
2011-11-07 22:58:27 +00:00
Nicolas Thill
8413e90418 package/base-files: /etc/passwd: fix uid number for user 'daemon' (conflicting with user 'nobody')
SVN-Revision: 28799
2011-11-07 11:02:55 +00:00
Felix Fietkau
248ab4ac2f base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time (fixes #10350, #10354)
SVN-Revision: 28768
2011-11-05 17:16:01 +00:00
Felix Fietkau
dab5ebaa76 netifd: ensure that a bridge gets created before hostapd needs it, hostapd must not attempt to create the bridge by itself
SVN-Revision: 28745
2011-11-04 01:05:12 +00:00
Felix Fietkau
44ba13b578 base-files: load modules early, run wifi detect afterwards and only then process uci defaults
this allows uci-defaults scripts to override wifi settings

SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
Jo-Philipp Wich
e3daeabda3 base-files: add some more protected services to sysupgrade kill blacklist
SVN-Revision: 28732
2011-11-03 19:25:25 +00:00
Jo-Philipp Wich
ef6d7a7e33 base-files: fix typo
SVN-Revision: 28681
2011-10-30 15:48:14 +00:00
Jo-Philipp Wich
52e93e54bc base-files: sysupgrade: kill all but essential processes before starting the update
SVN-Revision: 28626
2011-10-27 16:52:31 +00:00
Gabor Juhos
4cc48089c7 base-files/sysupgrade: add more busybox applet symlinks to ramdisk
Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk.
Also make code more readable by escaping that overly long line.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28616
2011-10-27 07:54:49 +00:00
Jo-Philipp Wich
272d95f0f1 base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system.
SVN-Revision: 28612
2011-10-27 00:21:53 +00:00
Felix Fietkau
55aeabae10 add an initial (experimental) version of netifd, disabled by default
SVN-Revision: 28499
2011-10-21 01:47:49 +00:00
Felix Fietkau
c2b5767572 base-files: move network related scripts to a separate package to make the transition to netifd easier
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
Jo-Philipp Wich
59c13202e0 base-files: introduce "igmp_snooping" option to toggle IGMP snooping on bridge interfaces
SVN-Revision: 28412
2011-10-11 13:43:08 +00:00
Jo-Philipp Wich
bfbbe5893f base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
Felix Fietkau
4246c6a6b5 base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar
SVN-Revision: 28297
2011-09-24 20:34:17 +00:00
Jo-Philipp Wich
41838f4585 base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
Vasilis Tsiligiannis
98372a8eb5 base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured
SVN-Revision: 28241
2011-09-14 13:37:44 +00:00
Vasilis Tsiligiannis
200fd7bce1 Revert "[package] base-files: Add support for assigning multiple IPv6 addresses on an interface"
Multiple IPv6 addresses should be handled with alias sections

SVN-Revision: 28240
2011-09-14 13:37:40 +00:00
Vasilis Tsiligiannis
718c8ab940 base-files: Add support for assigning multiple IPv6 addresses on an interface
SVN-Revision: 28222
2011-09-12 21:07:00 +00:00
Felix Fietkau
dea36724a4 base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems
SVN-Revision: 28126
2011-08-29 23:34:11 +00:00
Jo-Philipp Wich
aab33e2e9a base-files: fix arp() procedure to properly detect /usr/bin/arp
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
Felix Fietkau
8ff7756e82 base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
Jo-Philipp Wich
94c728dc39 base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
Jo-Philipp Wich
365f76551a base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.

The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.

Solves #9763.

SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
Jo-Philipp Wich
0de28706ca base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699.
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
Jo-Philipp Wich
1e34c02e3e base-files: add -h and --help options to sysupgrade (#9728)
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
Jo-Philipp Wich
e0e6d1029e base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars (#9711)
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
Daniel Dickinson
1f69f4cf64 base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
Jo-Philipp Wich
32731a72c2 base-files: pass conloglevel to syslogd (#9463, #9647)
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
Felix Fietkau
0a7a73261a base-files: do not use the relinked libgcc, fixes c++ exception handling issues (#9185)
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
Jo-Philipp Wich
28fbd7470d add gfortran compiler support (#9600, patch from Xiangfu Liu via Qi hardware)
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
Jo-Philipp Wich
344445715a base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
SVN-Revision: 27147
2011-06-09 12:36:30 +00:00
Jo-Philipp Wich
fd8ec24187 base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
Jo-Philipp Wich
97ee10d691 base-files: fix error reporting for unsupported protocols on virtual interfaces
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
Felix Fietkau
9a227d88dd base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
eliminates unnecessary flash write cycles at every boot

patch by Peter Wagner (tripolar)

SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
Felix Fietkau
60f66ded72 base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
SVN-Revision: 26990
2011-05-24 09:31:37 +00:00
Jo-Philipp Wich
9b8a5e604a base-files: mark /etc/crontabs/ as config directory
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
Jo-Philipp Wich
ed8f726dab ipcalc.sh CIDR notation Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:

# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

with this patch you can also execute it with:

sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.

Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.

Regards, Manuel

SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
Jo-Philipp Wich
ba1c1e9016 base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
Gabor Juhos
3b1b49a49b base-files: fix a typo in etc/banner
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
Jo-Philipp Wich
ff4203b9bd base-files: cleanup permissions of device files in common hotplug rules (#9211)
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
Jo-Philipp Wich
144bee2090 base-files: fix stale space in eglibc library install section (#9270)
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
Jo-Philipp Wich
2f6361832e base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"

Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.

Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
Vasilis Tsiligiannis
980190367c base-files: Use -h instead of deprecated -L for symlink check
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
Vasilis Tsiligiannis
48465d3d63 base-files: fix minor problem in init.d/boot
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
Daniel Dickinson
d5542b4f59 block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
SVN-Revision: 26479
2011-04-05 12:12:57 +00:00
Felix Fietkau
e4e63b9c1b base-files: bridge config, avoid having a random ipv6 ll address
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.

This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>

SVN-Revision: 26426
2011-04-03 01:23:45 +00:00
Jo-Philipp Wich
fe8b9d5232 base-files: properly handle vlans on top of wireless interfaces
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
Felix Fietkau
a3b9971d84 base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2
SVN-Revision: 26208
2011-03-17 19:09:43 +00:00
Felix Fietkau
66bcd1d049 base-files: add initial support for mounting overlayfs
SVN-Revision: 26207
2011-03-17 19:09:39 +00:00
Jo-Philipp Wich
629e73938e base-files: update sysctl.conf for modern kernels
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
Vasilis Tsiligiannis
1b66204ccd base-files: Autodetect newly added wireless hardware
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
Felix Fietkau
4bcca969dc base-files: link libpthread against libc
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
Felix Fietkau
71e83bd2e1 base-files: add a default /etc/services files
SVN-Revision: 26142
2011-03-13 19:47:42 +00:00
Felix Fietkau
c33f2efbb2 base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
SVN-Revision: 26138
2011-03-13 19:10:28 +00:00
Felix Fietkau
f5c130cfda base-files: add an ftp group as well
SVN-Revision: 26136
2011-03-13 19:04:32 +00:00
Felix Fietkau
554cbe7f18 base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
SVN-Revision: 26133
2011-03-13 18:56:34 +00:00
Felix Fietkau
e8491ab2a5 base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
Felix Fietkau
32d8fac477 base-files: only relink libraries if the linaro toolchain is selected
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
Felix Fietkau
e52b720870 gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
Felix Fietkau
357018e7e5 base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail (fixes #8978)
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
Felix Fietkau
0b9cfab2a2 base-files: fix Build/Compile override handling, fixes ar7 compile
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
Felix Fietkau
4e155b5283 base-files: do not build or use libgcc on m68k and avr32
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
Felix Fietkau
1cc0bcfffc base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00
Jo-Philipp Wich
73468de8d1 base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler
SVN-Revision: 25713
2011-02-25 22:44:37 +00:00
Michael Büsch
e6100a161b boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()
SVN-Revision: 25635
2011-02-20 22:40:47 +00:00
Michael Büsch
16a300ea66 base-files: Add "-o noatime" to mount wrapper
noatime is cheaper than default relatime.

SVN-Revision: 25634
2011-02-20 22:39:08 +00:00
Michael Büsch
3a12229c1d Fix whitespace
SVN-Revision: 25632
2011-02-20 21:25:45 +00:00
Hamish Guthrie
090c042089 base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
SVN-Revision: 25568
2011-02-18 10:37:26 +00:00
Felix Fietkau
e5e6dfe384 base-files: librt should depend on libpthread, not the other way around
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25548
2011-02-16 02:42:24 +00:00
Felix Fietkau
9f7f8110e7 base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker)
SVN-Revision: 25528
2011-02-13 19:06:20 +00:00
Imre Kaloz
e4589a2e5f it's time for some attitude adjustment ;)
SVN-Revision: 25514
2011-02-13 11:20:09 +00:00
Felix Fietkau
c672eeffc9 remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
SVN-Revision: 25511
2011-02-13 03:26:10 +00:00
Felix Fietkau
803e9ceb90 base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the code there
SVN-Revision: 25495
2011-02-13 01:44:57 +00:00
Jo-Philipp Wich
74ab5be3d7 base-files: remove ptbtime3 rdate server, its dead
SVN-Revision: 25479
2011-02-12 17:54:01 +00:00
Jo-Philipp Wich
8b1b99ba73 base-files: update rdate server list
SVN-Revision: 25478
2011-02-12 17:46:36 +00:00
Jo-Philipp Wich
ee3a4c2ee9 base-file: cleanup ipv6 enabling in unbridge
SVN-Revision: 25473
2011-02-12 16:14:15 +00:00
Jo-Philipp Wich
875ff44592 base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
Jo-Philipp Wich
4e34fc521c base-files: derive lease_acquired dhcp state var from /proc/uptime
SVN-Revision: 25452
2011-02-10 20:05:05 +00:00
Vasilis Tsiligiannis
d063af3fcf base-files: Add include for target specific hotplug rules
SVN-Revision: 25415
2011-02-07 22:28:09 +00:00
Michael Büsch
99c66237f0 hotplug2 rules: Run /etc/hotplug.d/firmware/ scripts (if any) on firmware load events
SVN-Revision: 25383
2011-02-06 14:35:07 +00:00
Jo-Philipp Wich
b33ce3109d base-files: remove remaining conffiles reference to /etc/banner
SVN-Revision: 25368
2011-02-04 23:05:12 +00:00
Jo-Philipp Wich
3d82109add base-files: don't stop hotplug events for ppp interfaces, similar fix like the earlier one for tun/tap interfaces
SVN-Revision: 25355
2011-02-03 22:43:11 +00:00
Jo-Philipp Wich
79b22b246b base-files: make the skipping of ppp interfaces in 10-net hotplug more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs
SVN-Revision: 25354
2011-02-03 22:34:30 +00:00
Vasilis Tsiligiannis
bd8a1549eb base-files: Fix alsa raw audio device hotplug rule
SVN-Revision: 25301
2011-02-02 01:23:34 +00:00
Vasilis Tsiligiannis
824331a594 hotplug2: Use stricter matching for rule regular expressions
SVN-Revision: 25282
2011-02-01 16:37:53 +00:00
Vasilis Tsiligiannis
3a3d95b191 base-files: Remove deprecated hotplug2 commands, update old commands to new
SVN-Revision: 25268
2011-01-31 22:29:31 +00:00
Jo-Philipp Wich
a0b2eba08c base-files: fix a typo in processing of additional dhcp request opts
SVN-Revision: 25239
2011-01-29 17:06:07 +00:00
Jo-Philipp Wich
a8edd9d50e base-files: fix handling of dhcp "reqopts" option
SVN-Revision: 25237
2011-01-29 13:45:16 +00:00
Florian Fainelli
d7fe921089 base-files: support port_state in led config (#6763)
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

SVN-Revision: 25172
2011-01-27 21:49:46 +00:00
Gabor Juhos
25feec0c9c package/base-files: add get_magic_long() to common upgrade script
Patch-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25117
2011-01-26 20:35:37 +00:00
Daniel Dickinson
f93b6cb844 base-files: Fix typo in option name for disabling failsafe announcment Thanks to Andrey Zholos for this patch
SVN-Revision: 25040
2011-01-18 14:46:25 +00:00
Jo-Philipp Wich
3b6851aa82 base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request
SVN-Revision: 24780
2010-12-22 07:20:24 +00:00
Jo-Philipp Wich
3bd7985a0b base-files: the busybox update to v1.15.3 completely broke udhcpc route option handling, repair default.script to work with the new format (#6435)
SVN-Revision: 24778
2010-12-22 07:07:15 +00:00
Jo-Philipp Wich
deb9661785 Âbase-files: don't mark /etc/banner as conffile
SVN-Revision: 24742
2010-12-20 19:51:05 +00:00
Gabor Juhos
63c786dde7 base-files: add support for the usbdev LED trigger
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
Felix Fietkau
5a351509aa base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
SVN-Revision: 24540
2010-12-13 08:01:21 +00:00
Florian Fainelli
ebe7bdba88 adds a --help option to /sbin/wifi
Signed-off-by: Sebastian Philipp <sebastian@spawnhost.de>

SVN-Revision: 24258
2010-12-05 11:22:56 +00:00
Jo-Philipp Wich
9a996248d4 base-files: derive connect_time from uptime as local system time may warp due to rdate, ntp and other means
SVN-Revision: 24212
2010-12-01 19:55:24 +00:00
Jo-Philipp Wich
a8c3d1ab6d base-files: save the connect time of interfaces in uci state
SVN-Revision: 24206
2010-12-01 17:37:32 +00:00
Jo-Philipp Wich
ca829e805b base-files: disable ipv6 on bridge ports, this prevents stray RA assigned and link local addresses on bridge member devices
SVN-Revision: 24194
2010-11-30 00:46:21 +00:00
Jo-Philipp Wich
d0ab35c115 base-file: add metric option for static and dhcp protos, this simplifies the management of multiple default routes
SVN-Revision: 24020
2010-11-17 19:11:50 +00:00
Jo-Philipp Wich
59a3841c9c base-files: mark libc as hold and essential, opkg should now bail out if someone tries to uninstall libc
SVN-Revision: 23960
2010-11-11 16:18:58 +00:00
Jo-Philipp Wich
c5711cadd3 base-files: change /dev permissions to 0755 when hotplug2 is used (#6039)
SVN-Revision: 23908
2010-11-07 00:28:15 +00:00
Jo-Philipp Wich
a8efa34da3 Fix permissions for /etc and other dirs after clean flash (#6039)
During the first OpenWrt boot after a clean flash (when the jffs2
partition is not yet initialized) tmpfs is used instead of the usual
jffs2 overlay filesystem.  If this tmpfs is mounted with default
options, all directories created there (/etc, /etc/config, other
subdirectories in /etc) get permissions 1777 by default, and these
permissions then persist in the created jffs2 at least until
subsequent sysupgrade.  Mounting tmpfs with mode=0755 fixes the
permission problem.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>

SVN-Revision: 23906
2010-11-07 00:26:00 +00:00
Jo-Philipp Wich
cfe4db7bda base-files: mark /etc/shadow as conffile
SVN-Revision: 23590
2010-10-23 15:49:04 +00:00
Jo-Philipp Wich
d856ed78ad base-files: add udhcpc vendorid option (#7744)
SVN-Revision: 23279
2010-10-06 21:21:28 +00:00
Jo-Philipp Wich
8dc04c9018 base-files: mark /etc/sysupgrade.conf as conffile
SVN-Revision: 23264
2010-10-05 22:08:23 +00:00
Jo-Philipp Wich
d80f82d7a4 base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles
SVN-Revision: 23258
2010-10-05 19:24:12 +00:00
Jo-Philipp Wich
978ecae685 base-files: sysupgrade: merge info from "opkg list-changed-conffiles" to backup file list
SVN-Revision: 23233
2010-10-05 07:40:25 +00:00
Jo-Philipp Wich
a65975e0d6 base-files: mark /etc/rc.local as conffile
SVN-Revision: 23232
2010-10-05 07:32:37 +00:00
Jo-Philipp Wich
0fda5f7507 base-files: utilize uci_get_state to read the previous dhcp router address in udhcpc default script. The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the cached state vars and query uci directly to make the script immune against unwanted runtime changes.
SVN-Revision: 23211
2010-10-04 00:07:07 +00:00
Jo-Philipp Wich
6bcdab79b6 base-files: prevent possible sourcing of JFFS2 meta files when merging overlay hooks
SVN-Revision: 23114
2010-09-23 17:32:58 +00:00
Daniel Dickinson
b125e3f68e Fixed duplicated content in file in commit 23111
SVN-Revision: 23112
2010-09-23 14:06:47 +00:00
Daniel Dickinson
7fe34123d6 Missed file committing previous change 23110
SVN-Revision: 23111
2010-09-23 14:03:22 +00:00
Daniel Dickinson
18b473ca9b base/block-extroot, base/block-mount: Modified preinit and block-extroot and block-mount so that use of block-mount and block-extroot do not require that block-extroot, block-mount, nor the kernel modules they depend, on are required to included in the image. That is block-extroot and dependencies may now be installed as modules onto the jffs2 part of a squashfs system and it will work. In addition packages which are installed into the jffs2 of a squashfs system may now affect preinit, so long as they do not require execution of commands that occur before the merging of the jffs2 and built-in (squashfs) preinit scripts is done.
Thanks jow for the preinit merge stuff!

SVN-Revision: 23110
2010-09-23 13:58:05 +00:00
Daniel Dickinson
1385904dfa base-files: Add function pi_include the /lib/functions/boot.sh used by preinit, which safely sources files as well as working correctly whether the script using it is a package added to the jffs2 part of a squashfs or built into an image or on some other root filesystem.
SVN-Revision: 23099
2010-09-19 23:29:40 +00:00
Jo-Philipp Wich
cdd98e3f3a base-files: bump pkg revision after r23091, r23092
SVN-Revision: 23093
2010-09-19 15:14:42 +00:00
Jo-Philipp Wich
52531f4eb6 base-files: kill possibly existing udhcpc instance when bringing up a dhcp iface, utilize service_kill() in dhcp shutdown. Based on patch by Stijn Tintel. Possibly related to #7314
SVN-Revision: 23092
2010-09-19 15:13:06 +00:00
Jo-Philipp Wich
84b7b812f3 base-files: cached state vars after scan_interfaces might be out of sync when binding dhcp leases, this could lead to an unconfigured wan interface in certain circumstances. Replace config_get calls with uci_get_state
SVN-Revision: 23091
2010-09-19 15:04:08 +00:00
Jo-Philipp Wich
4815de3f26 base-files: introduce service_kill() into functions.sh - a convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill
SVN-Revision: 23087
2010-09-19 14:03:32 +00:00
Jo-Philipp Wich
91118a9500 base-files: add an experimental "-c" flag which tries to preserve *all* changed files in /overlay/etc minus some system files
SVN-Revision: 22977
2010-09-07 22:20:26 +00:00
Jo-Philipp Wich
5949f33b06 base-files: make build dependant on opkg/host
SVN-Revision: 22948
2010-09-06 02:13:19 +00:00
Felix Fietkau
62c1740676 toolchain: fix the sysroot mess by getting rid of $(TOOLCHAIN_DIR)/usr and moving it back to $(TOOLCHAIN_DIR), this change makes the toolchain relocatable again, which should fix the SDK
SVN-Revision: 22723
2010-08-19 12:49:51 +00:00
Jo-Philipp Wich
63991ba875 base-files, uci: properly revert list state on config_load This fixes a bug where lists end up with duplicate values if config_load was invoked multiple times.
SVN-Revision: 22629
2010-08-14 00:45:15 +00:00
Hamish Guthrie
cbc8b3968c base_files: Remove . from end of localhost entry
SVN-Revision: 22508
2010-08-06 08:00:40 +00:00
Jo-Philipp Wich
8c4ac87e8f base-files: r22444 caused interfaces to remain down if the macaddr option is used, fix it. Also localize the txqueuelen option variable
SVN-Revision: 22467
2010-08-02 20:45:52 +00:00
Florian Fainelli
56aa129fed add txqueuelen option, patch from Roberto Riggio
SVN-Revision: 22444
2010-07-31 22:32:28 +00:00
Jo-Philipp Wich
9bf9ea9802 base-files: localize variable in do_move_devtmpfs(), remove extra temporary variable and shorten conditional
SVN-Revision: 22380
2010-07-24 19:33:11 +00:00
Alexandros C. Couloumbis
6a85a3b53b package/base-files: add support for devtmpfs (thank you rauchwolke at gmx.net)
SVN-Revision: 22379
2010-07-24 19:21:27 +00:00
Jo-Philipp Wich
e1a654dd9f base-files: unconditionally unlock the rootfs_data partition (#7437)
SVN-Revision: 22377
2010-07-24 15:47:15 +00:00
Jo-Philipp Wich
1dd824a358 base-files, busybox: fix 22279, simplify code and get rid of awk
SVN-Revision: 22282
2010-07-18 18:36:12 +00:00
Daniel Dickinson
8974bc6ae2 base-files & telnet: Fixed telnet starting even with root password when shadow passwords in use.
SVN-Revision: 22279
2010-07-18 15:18:38 +00:00
Felix Fietkau
3e75044a95 wifi: fix duplicate ht capabilities in the hostapd config file by clearing the list at config load time
SVN-Revision: 22099
2010-07-08 18:36:12 +00:00
Jo-Philipp Wich
506db2a57e base-files: add "mtu" option for route sections, allows setting per-route mtu values
SVN-Revision: 22003
2010-06-30 23:46:34 +00:00
Jo-Philipp Wich
ce5d644ac1 base-files: enable IPv6 forwarding by default since the default firewall supports ip6tables now
SVN-Revision: 21766
2010-06-12 16:59:12 +00:00
Jo-Philipp Wich
93c2c81bcf base-files: introduce option "broadcast" for proto=dhcp interface to enable the broadcast flag in DHCP requests, required by certain providers
SVN-Revision: 21661
2010-06-02 20:21:41 +00:00
Jo-Philipp Wich
fa244a1265 base-files: remove IPv6 LL addr from interfaces before adding them to a bridge
SVN-Revision: 21659
2010-06-02 17:18:38 +00:00
Jo-Philipp Wich
94db915196 base-files: - add aliases to device by default (not ifname) - introduce option "layer" to select the target ifname to attach the alias to: - 3 use tun device (tun over bridge over device) fallback to bridge or device - 2 use bridge (bridge over device) fallback to device - 1 use device
SVN-Revision: 21655
2010-06-02 00:22:13 +00:00
Jo-Philipp Wich
75941a19ac base-file: move alias setup to route hotplug, this fixes alias sections for non-static interfaces like ppp, dhcp, 6in4 etc.
SVN-Revision: 21652
2010-06-01 21:43:52 +00:00
Jo-Philipp Wich
c14e8be337 base-files: don't skip subsequent hotplug rules when doing makedev for tun or tap interfaces - this fixes support for uci managed OpenVPN interfaces and other externally created tuntap devices
SVN-Revision: 21641
2010-05-31 01:22:36 +00:00
Jo-Philipp Wich
261d41a906 base-files: - use add_dns() and remove_dns() for when changing resolv.conf.auto for static or dhcp interfaces - force 0644 permissions when creating resolv.conf.auto, fixes dnsmasq permissions denied problem with pppd interfaces - revert dns servers in /sbin/ifdown - bump package revision
SVN-Revision: 21638
2010-05-30 18:23:43 +00:00
Jo-Philipp Wich
09df0523fd base-files: revert r21595
SVN-Revision: 21597
2010-05-28 10:52:02 +00:00
Jo-Philipp Wich
482b8385d2 base-files: bring bridge port iface down before changing the mac (#7111)
SVN-Revision: 21595
2010-05-28 00:59:19 +00:00
Jo-Philipp Wich
8bc961239b base-files: 3g connection interfaces are now called "3g-*" - adjust 10-net hotplug handler to match them
SVN-Revision: 21591
2010-05-28 00:35:54 +00:00
Jo-Philipp Wich
c0820d3261 base-files: respect .auto option when running coldplug_interface_*() hooks on boot
SVN-Revision: 21588
2010-05-27 23:04:56 +00:00
Felix Fietkau
6df2ad3e70 when changing the mac address of a bridge interface, keep member interface addresses in sync (patch from #7111)
SVN-Revision: 21577
2010-05-27 14:04:28 +00:00
Jo-Philipp Wich
d6a142375b base-files: fix a preinit hang in jffs2_ready() when no rootfs_data partition is found (#7362)
SVN-Revision: 21511
2010-05-20 05:57:54 +00:00
Jo-Philipp Wich
da55c9639a base-files (#7316) - improve rdate reliability - make rdate config more ntp like - move time server list to /etc/config/timeserver - bump package revision
SVN-Revision: 21495
2010-05-17 19:54:35 +00:00
Jo-Philipp Wich
ea06a67eac base-files: use uci_get() wrapper (#7312)
SVN-Revision: 21490
2010-05-17 19:34:08 +00:00
Jo-Philipp Wich
be41fdd01a base-files: add add_dns() and remove_dns() helpers to network config, useful to merge dns entries from multiple interfaces
SVN-Revision: 21391
2010-05-07 01:17:47 +00:00
Jo-Philipp Wich
6a3cbba92e base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot
SVN-Revision: 21389
2010-05-06 19:50:22 +00:00
Jo-Philipp Wich
dd38b15b75 base-files, ppp: fix interface shutdown
SVN-Revision: 21386
2010-05-06 01:14:24 +00:00
Jo-Philipp Wich
66ab73d01f base-files, ppp: remove protocol specific cleanup code from /sbin/ifdown and move it to protocol stop callbacks
SVN-Revision: 21383
2010-05-05 23:24:11 +00:00
Felix Fietkau
f9591d229a base-files: do not bring up wlan interfaces from hotplug events, so that wrong network/wireless configs are more noticeable
SVN-Revision: 21379
2010-05-05 15:56:58 +00:00
Vasilis Tsiligiannis
a481cafb55 base-files: Remove redundant stopping of watchdog
busybox watchdog applet should stop the watchdog before shutting down

SVN-Revision: 21341
2010-05-03 10:56:58 +00:00
Florian Fainelli
20da5f495f add stop() to watchdog init script, patch from Yury Polyanskiy
SVN-Revision: 21334
2010-05-03 09:05:35 +00:00
Nicolas Thill
ebb5858ba8 package/base-files: fix libraries packaging on 64bits targets (closes: #6918)
SVN-Revision: 21282
2010-05-01 13:29:04 +00:00
Florian Fainelli
1847940688 Fix bug in foregrounding in /etc/init.d/rcS
Not using the config_xxx functions correctly.  Amended.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20928
2010-04-16 18:14:08 +00:00
Nicolas Thill
e5e0966186 package/base-files: fix typo in r20874 (thanks to rhk for spotting it)
SVN-Revision: 20878
2010-04-15 08:22:39 +00:00
Nicolas Thill
15542fcdd8 package/base-files: use a single $(CP) instead of two to copy shared library files
SVN-Revision: 20874
2010-04-15 06:01:45 +00:00
Florian Fainelli
eafa2ec962 option to allow boot to run to completion before starting shell
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.

This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20841
2010-04-13 19:57:25 +00:00
Felix Fietkau
c82bcb2a29 fix jffs2 and mini_fo mount in failsafe (patch from #7134)
SVN-Revision: 20838
2010-04-13 14:24:58 +00:00
Florian Fainelli
135c4b8d05 add debugging entry to hotplug config
This is useful for seeing what devices are detected by the system.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 20785
2010-04-10 18:35:14 +00:00
Vasilis Tsiligiannis
a1e4c66c16 base-files: Use hotplug2 to download firmware
SVN-Revision: 20683
2010-04-03 18:21:02 +00:00
Jo-Philipp Wich
10c00a6368 base-files: also regenerate wifi config if existing config contains only whitespace
SVN-Revision: 20669
2010-04-03 13:31:59 +00:00
Vasilis Tsiligiannis
043b77a460 base-files: Cancel firmware loading if file doesn't exist
SVN-Revision: 20649
2010-04-01 15:22:13 +00:00
Nicolas Thill
b34bba25d2 base-files: fix shell syntax (prevent error messages when activating initscripts in IB)
SVN-Revision: 20571
2010-03-29 03:58:17 +00:00