Currently ubinize-image script always expects the
rootfs image to be passed and a volume for it created.
So, to allow only ubinizing a kernel for example which
the MikroTik hAP ac3 and other new NAND devices from
MikroTik require make rootfs an optional parameter like
kernel.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Set the image sequence number to SOURCE_DATE_EPOCH.
If not set, ubinize will use rand() as image sequence.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SquashFS has a minimum block size of at least 1k, so we need to make
sure the last data block is also at least that big.
This is not an issue on NOR or SD CARD devices, since their rootfs
partitions go all the way to the end of the usable space.
But on NAND with ubiblock, the rootfs partition will be the exact space,
rounded up to LEB size. Unfortunately, some NAND chips with small sub
pages have a LEB size of x.5 kiB. This can cause the the last data block
to be less than 1k, which will cause the last block to be inaccessible,
causing boot failures as seen on MR24:
[ 1.532960] block ubiblock0_3: created from ubi0:3(rootfs)
[ 1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem
[ 1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472
[ 1.559896] squashfs: SQUASHFS error: unable to read id index table
[ 1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5
Since on most NOR devices, the start of the squashfs partition is not
aligned. Since the start of the rootfs_data partition there is dependend
on the SquashFS size, we cannot just always pad it, as the padding could
creep into the rootfs_data partition, breaking jffs2.
So fix this by ensuring a squashfs rootfs is always a multiple of 1k
only for UBI and NAND sysupgrade images.
Fixes#2460 without affecting NOR devices.
Tested-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
New Docker based buildslaves install just bare minimum of packages, thus
not having bsdmainutils package installed which provides `hexdump`
utility, leading to the following build breakage on buildbots:
ubinize-image.sh: 12: /builder/scripts/ubinize-image.sh: hexdump: not found
So this patch simply replaces `hexdump` with `od` utility provided by
coreutils package, which should be likely available.
Co-authored-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
r41359 broke support for building ubinized images which do
include a kernel volume.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41368
ubinize-image.sh previously used ${var:offset:length} substitutions
which are not valid in standard shell.
Replace the existing parameter matching by a case ... esac expression.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41347
This is a wrapper for the ubinize tool which integrates auto-generation
of the ubinize.cfg for common volume layouts with and without a kernel
volume.
It supports auto-detecting the rootfs-type and decides whether or not
to include a rootfs_data volume based on whether the rootfs is ubifs
or not (and thus is read-only and needs rootfs_data ubifs overlay).
The script allows to create layouts as found in all current
ubinize{,-overlay}.cfg files using
ubinize-image.sh --no-kernel root.{ubifs,squashfs} output.ubi $UBI_OPTS
It also includes support for adding ubootenv and ubootenv2 volumes
typically used by U-Boot for storing its environment in UBI using the
"--uboot-env" parameter.
See also
https://gitorious.org/openwrt-oxnas/openwrt-oxnas/source/target/linux/
oxnas/image/Makefile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
create mode 100755 scripts/ubinize-image.sh
SVN-Revision: 41121
