Commit Graph

1601 Commits

Author SHA1 Message Date
Fritz D. Ansel
65ee14a118 dropbear: allow to use with xinetd
with xinetd allowed+blocked (ipv6) hosts could be set
what is not possible with stock dropbear package

The file size increased 12 Bytes, so this "opimisation" did not really helped.
Within a compressed storage format it is 0..

ipk: 111.171 -> 111.361 = 190 bytes
bin: 215.128 -> 215.140 =  12 bytes

Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
2021-08-21 15:59:39 +02:00
Felix Fietkau
8b7517465b hostapd: fix broken check in radar detection notification
This check was accidentally left in after reworking the code,
causing a segfault

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-08-11 19:01:09 +02:00
Jesus Fernandez Manzano
af83e3ce0f hostapd: respect fixed channel BW in HE20 mode
When using htmode 'HE20' with a radio mode that uses wpa-supplicant
(like mesh or sta), it will default to 40 MHz bw if disable_ht40 is not
set. This commit fixes this behaviour.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
2021-08-08 19:50:46 +02:00
Daniel Golle
ddc8d085f3
dnsmasq: reset EXTRA_MOUNT in the right place
EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than
just once at the beginning of the script.

Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 15:06:57 +01:00
Daniel Golle
ac4e8aa2f8
dnsmasq: fix more dnsmasq jail issues
* remove superflus mounts of /dev/null and /dev/urandom
 * reset EXTRA_MOUNTS at the beginning of the script
 * add mount according to ignore_hosts_dir
 * don't add mount for file which is inside a directory already in the
   EXTRA_MOUNTS list

Fixes: 59c63224e1 ("dnsmasq: rework jail mounts")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 11:35:31 +01:00
Daniel Golle
59c63224e1
dnsmasq: rework jail mounts
* split into multiple lines to improve readability
 * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts
 * remove no longer needed mount for /sbin/hotplug-call
 * add dhcp-script.sh dependencies (jshn, ubus)

Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount")
Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call")
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-01 03:47:43 +01:00
Felix Fietkau
f1b98fa4fa hostapd: add missing chunk for the snoop interface fix
Fixes: 7b46377a0c ("hostapd: make the snooping interface (for proxyarp) configurable")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 12:41:36 +02:00
Felix Fietkau
ae1c5d0d6a hostapd: make proxyarp work with libnl-tiny
Remove a dependency on libnl3-route

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Felix Fietkau
5dd1bd5b80 hostapd: fix a segfault on sta disconnect with proxy arp enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Felix Fietkau
7b46377a0c hostapd: make the snooping interface (for proxyarp) configurable
Use the VLAN interface instead of the bridge, to ensure that hostapd receives
untagged DHCP packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-28 05:55:11 +02:00
Nick Hainke
3a94c2ca5c dnsmasq: add /tmp/hosts/ to jail_mount
Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/".
If you don't add this to the jail_mount, dnsmasq can't read it anymore.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2021-07-19 13:11:23 +01:00
Hans Dedecker
033d5ff25e odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)
bc9d317 dhcpv6-ia: fix invalid preferred lifetime

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-07-18 19:34:10 +02:00
Felix Fietkau
9ec5f5f230 hostapd: add "force" parameter for channel switch
This will restart the interface in case the CSA fails and can be used to
force the device on a DFS channel (including full CAC)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-15 10:46:10 +02:00
Felix Fietkau
8f7e6db230 hostapd: fix uninitialized stack variable on CSA
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:34:08 +02:00
Felix Fietkau
da2c244e8c hostapd: initialize ht/vht/he mode on channel switch by default
Use the current mode, but allow overwriting via ubus command parameters

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:33:56 +02:00
Felix Fietkau
1ec4af4151 hostapd: add support for enabling HE on channel switch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:33:47 +02:00
Felix Fietkau
9aa0561534 hostapd: make it possible to update station airtime weights via ubus
This allows dynamic tuning based on other runtime information

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-07-12 13:31:40 +02:00
David Bauer
b0483b19f9 hostapd: add HE flag to get_clients
Expose the hostapd HE flag via ubus to indicate HE capable devices.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-07-06 02:27:06 +02:00
Martin Weinelt
cde154c871 hostapd: remove unused mac_buff allocation
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
2021-07-06 02:26:44 +02:00
Martin Weinelt
398df62756 hostapd: report bssid, ssid and channel over ubus
Imports a function from iw to convert frequencies to channel numbers.

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
[fix potential out of bounds read]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-07-06 02:26:38 +02:00
Kevin Darbyshire-Bryant
e4cfefa9fc dnsmasq: use local option for local domain parameter
'--local' is a synonym for '--server' so let's use '--local' in the
resultant config file for uci's 'local' instead of uci's local
parameter being turned into '--server'.  Slightly less confusion all
round.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-07-05 16:49:06 +01:00
Etan Kissling
ba5bd8e556 dnsmasq: distinct Ubus names for multiple instances
Currently, when using multiple dnsmasq instances they are all assigned
to the same Ubus instance name. This does not work, as only a single
instance can register with Ubus at a time. In the log, this leads to
`Cannot add object to UBus: Invalid argument` error messages.
Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes
behaviour so that instead of the log, dnsmasq exits at start instead.

With this patch, all dnsmasq instances are assigned unique names so that
they can register with Ubus concurrently. One of the enabled instances
is always assigned the previous default name "dnsmasq" to avoid breaking
backwards compatibility with other software relying on that default.
Previously, a random instance got assigned that name (while the others
produced error logs). Now, the first unnamed dnsmasq config section is
assigned the default name. If there are no unnamed dnsmasq sections the
first encountered named dnsmasq config section is assigned instead.

A similar issue exists for Dbus and was similarly addressed.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
[tweaked commit message] dnsmasq was not crashing it is exiting
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-29 11:27:26 +01:00
Kevin Darbyshire-Bryant
76cc8a036c Revert "dnsmasq: Update to version 2.86test3"
This reverts commit 3628870015.

dnsmasq v2.86test3 has some issues with ubus, so is being reverted.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-26 20:31:29 +01:00
Kevin Darbyshire-Bryant
2a9d7ecd27 Revert "dnsmasq: add config option for connmark DNS filtering"
This reverts commit dea4bae7c2.

dnsmasq v2.86test3 has some issues with ubus and needs reverting, hence
this needs reverting.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-06-26 20:30:58 +01:00
Etan Kissling
dea4bae7c2 dnsmasq: add config option for connmark DNS filtering
This adds uci support to configure connmark based DNS filtering.

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
(See https://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/2021q2/015151.html)
Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-06-26 13:28:47 +01:00
Etan Kissling
3628870015 dnsmasq: Update to version 2.86test3
Need this version to add config option for connmark DNS filtering.

Summary of upstream CHANGELOG:
* Handle DHCPREBIND requests in the DHCPv6 server code.
* Fix bug which caused dnsmasq to lose track of processes forked.
* Major rewrite of the DNS server and domain handling code.
* Revise resource handling for number of concurrent DNS queries.
* Improve efficiency of DNSSEC.
* Connection track mark based DNS query filtering.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
2021-06-26 13:28:08 +01:00
Felix Fietkau
1818b038d7 hostapd: add support for providing vendor specific IE elements
They can be added as hex digit strings via the 'vendor_elements' option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-24 15:56:46 +02:00
Raphaël Mélotte
acdb7c38c6 hostapd: add default_disabled option to the supplicant
With the default configuration we generate, the supplicant starts
scanning and tries to connect to any open network when the interface
is enabled.

In some cases it can be desirable to prevent the supplicant from
scanning by itself. For example, if on the same radio an AP is
configured and an unconfigured STA is added (to be configured with
WPS), the AP might not be able to beacon until the STA stops
scanning.

In such a case, the STA configuration can still be required to set
specific settings (e.g. multi_ap_backhaul_sta) so it can't be set to
"disabled" in uci (because that would prevent the supplicant from
being run at all). The alternative is to add the "disabled" parameter
to the default network block in the supplicant configuration.

This patch adds a "default_disabled" setting in UCI which, when set,
adds the "disabled" parameter to the supplicant default network block.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-06-23 14:52:16 -10:00
Timo Sigurdsson
bf98faaac8 hostapd: make wnm_sleep_mode_no_keys configurable
In the aftermath of the KRACK attacks, hostapd gained an AP-side workaround
against WNM-Sleep Mode GTK/IGTK reinstallation attacks. WNM Sleep Mode is not
enabled by default on OpenWrt, but it is configurable through the option
wnm_sleep_mode. Thus, make the AP-side workaround configurable as well by
exposing the option wnm_sleep_mode_no_keys. If you use the option
wpa_disable_eapol_key_retries and have wnm_sleep_mode enabled, you might
consider using this workaround.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-22 11:10:06 -10:00
Timo Sigurdsson
85ce590705 hostapd: fix handling of the channel utilization options
Commit 0a7657c ("hostapd: add channel utilization as config option") added the
two new uci options bss_load_update_period and chan_util_avg_period. However,
the corresponding "config_add_int" calls for these options weren't added, so
attempting to actually use these options and change their values is bound to
fail - they always stay at their defaults. Add the missing code to actually
make these options work.

Fixes: 0a7657c ("hostapd: add channel utilization as config option")
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-21 19:04:06 -10:00
Timo Sigurdsson
9f09c1936a hostapd: make country3 option configurable
The country3 option in hostapd.conf allows the third octet of the country
string to be set. It can be used e.g. to indicate indoor or outdoor use (see
hostapd.conf for further details). Make this option configurable but optional
in OpenWrt.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
2021-06-21 19:02:33 -10:00
Michael Yartys
b9b4aef4f2 hostapd: add support for setting sae_pwe
Make it possible to specify the SAE mechanism for PWE derivation. The
following values are possible:

0 = hunting-and-pecking loop only
1 = hash-to-element only
2 = both hunting-and-pecking loop and hash-to-element enabled

hostapd currently defaults to hunting-and-pecking loop only.

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2021-06-20 15:42:52 -10:00
Dobroslaw Kijowski
bb2ac5a33b hostapd: stop advertising 11w feature
This is a follow up of 1a9b896d ("treewide: nuke DRIVER_11W_SUPPORT").
LuCI commit ab010406 ("luci-mod-network: skip check for 802.11w feature")
skips check of the 11w feature [1]. Now advertising it in hostapd is
superfluous so stop doing it.

[1]: https://github.com/openwrt/luci/pull/4689

Signed-off-by: Dobroslaw Kijowski <dobo90@gmail.com>
[remove outdated PKG_RELEASE bump and update to SPDX]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-20 14:11:30 -10:00
Martin Schiller
2c6c1501af uhttpd: make organization (O=) of the cert configurable via uci
Make the organization (O=) of the cert configurable via uci. If not
configured, use a combination of "OpenWrt" and an unique id like it was
done before.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2021-06-20 13:50:36 -10:00
Rosen Penev
3dabb62581 treewide: remove PKG_INSTALL from CMake packages
It's already default with cmake.mk

Found with:

git grep PKG_INSTALL\: | cut -d ':' -f 1 | sort -u > ins
git grep cmake.mk | cut -d ':' -f 1 > cmake
comm -1 -2 ins cmake

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-19 20:44:59 -10:00
Hans Dedecker
6ed0ddde05 odhcpd: update to latest git HEAD
564d25e config: fix ra_flags none setting

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-06-13 22:28:40 +02:00
Rosen Penev
09de28090c package: fix cmake packages build with ninja
+= is needed for CMAKE_OPTIONS.

mt76 needs Ninja disabled as the kernel stuff uses normal make.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-12 10:46:39 +02:00
Felix Fietkau
305c1b8d74 hostapd: configure inter-AP communication interface for 802.11r
In setups using VLAN bridge filtering, hostapd may need to communicate using
a VLAN interface on top of the bridge, instead of using the bridge directly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-05 06:53:29 +02:00
Felix Fietkau
89bd8607f8 hostapd: fix bringing up vlan interfaces with the no-bridge option
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-04 20:36:42 +02:00
Hans Dedecker
4fd4e9997a odhcpd: update to git HEAD
a12fcb3 config: log config parse failures to syslog
ebd4297 cmake: enforce additonal compiler checks
405da32 odhcpd: fix extra compiler warning

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2021-06-03 21:07:42 +02:00
John Crispin
96e9c81aab hostapd: fix radius problem due to invalid attributes
The offending commit caused the configuration file to contain:
  radius_auth_req_attr=
  radius_acct_req_attr=
which cause hostapd to add an ATTR of type 0 into the messages.

hostapd: RADIUS message: code=4 (Accounting-Request) identifier=0 length=93
hostapd:    Attribute 40 (Acct-Status-Type) length=6
hostapd:       Value: 7
hostapd:    Attribute 30 (Called-Station-Id) length=28
hostapd:       Value: 'C4-41-1E-F5-2D-55:OpenWifi'
hostapd:    Attribute 61 (NAS-Port-Type) length=6
hostapd:       Value: 19
hostapd:    Attribute 0 (?Unknown?) length=3    <----------------
hostapd:    Attribute 55 (Event-Timestamp) length=6
hostapd:       Value: 1622726457
hostapd:    Attribute 41 (Acct-Delay-Time) length=6
hostapd:       Value: 0
hostapd:    Attribute 44 (Acct-Session-Id) length=18
hostapd:       Value: '9B5961E7235AAEC6'

Fixes: 3bd6c8c728 (hostapd: add additional radius options)
Signed-off-by: John Crispin <john@phrozen.org>
2021-06-03 16:00:51 +02:00
John Crispin
98621c9782 hostapd: add eap_server support
This makes it possible to avoid using a RADIUS server for WPA enterprise authentication

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
704ab6a002 hostapd: add default values for r0kh/r1kh
This allows WPA enterprise roaming in the same mobility domain without any
manual key configuration (aside from radius credentials)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
ec223cf724 hostapd: add support for specifying the maxassoc parameter as a device option
It allows enforcing a limit on associated stations to be enforced for the
full device, e.g. in order to deal with hardware/driver limitations

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
e309b57619 hostapd: add support for configuring proxy ARP
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
190d4b6184 hostapd: add configurable rssi thresholds for rejecting assoc/probe requests
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Felix Fietkau
46509a51dd hostapd: add support for configuring the beacon rate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-02 09:33:12 +02:00
Adrian Schmutzler
54cc1756e2 hostapd: update to version 2021-05-22
This update only adds one commit:
b102f19bcc53 tests: Opportunistic Wireless Encryption - SA Query

The main reason for the bump is to have a newer PKG_SOURCE_DATE,
so we can reset PKG_RELEASE to 1 (this has not been done for the
most recent bump), and replace it with AUTORELEASE.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-29 00:31:25 +02:00
Felix Fietkau
962d530dea hostapd: support verbose build using V=sc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-05-27 12:17:02 +02:00
David Bauer
553cc47ec7 hostapd: ACS: fix channel 100 frequency
Channel 100 is a valid channel to choose for 80MHz operation. However,
it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel
assigned to this frequency.

Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz
operation again.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:12:09 +02:00