Commit Graph

12342 Commits

Author SHA1 Message Date
Zoltan Herpai
06fdad1c12 mxs: - bump target to 3.14.14 - update dcp module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 41949
2014-08-02 11:29:11 +00:00
Zoltan Herpai
15facdb2fa mxs: add 3.14 config and patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 41948
2014-08-02 11:20:01 +00:00
Zoltan Herpai
639a1f375b mxs: remote 3.12 patches and configs
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 41947
2014-08-02 11:18:00 +00:00
Jo-Philipp Wich
baa7c211f5 netfilter: introduce xt_id match
This commit implements a new netfilter match "xt_id" which can be used to
attach unsigned 32bit IDs to iptables rules.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41945
2014-08-01 22:49:47 +00:00
Jonas Gorski
930e3e7ca3 brcm63xx: add preliminary support for D-Link DSL-2751B E1
Mostly works except for USB led. Flashing not tested yet. Mostly
as an example for the sprom fixup code.

Fixup values taken from GPL tarball by comparing bcm43217_map.c
with the struct in sprom.c.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41944
2014-08-01 21:56:46 +00:00
Jonas Gorski
76746026b3 brcm63xx: rework fallback sprom support
Rework fallback sprom support by providing different sproms for
different chips. Also make it optional to use.

This likely causes sprom fallback support to break on a few boards.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41942
2014-08-01 21:56:38 +00:00
Jonas Gorski
faa51b307c brcm63xx: switch to 3.14
Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41941
2014-08-01 21:56:35 +00:00
Jonas Gorski
701e2a38fe brcm63xx: add working lzma-loader and use it for initramfs
Add a working lzma loader and use it for generating initramfs kernels
to allow easily netbooting elf kernels on devices with a 4 MiB CFE
size limit.

Based on ar71xx's lzma-loader.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
John Crispin
21845cb45d ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41939
2014-08-01 20:51:24 +00:00
John Crispin
7d9bac5247 ramips: Add support for SPI_CS1 pinmux
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41938
2014-08-01 20:51:14 +00:00
John Crispin
9efd7ebd34 ramips: add support for easyacc wizard8800
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>

SVN-Revision: 41936
2014-08-01 11:19:50 +00:00
John Crispin
c6674722b9 ramips: Fix LEDs on the Kingston MLW221
LED Fix up for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41933
2014-08-01 11:19:39 +00:00
John Crispin
e7ec79821a ar71xx: oolite: the buttons are not active_low
this caused factory resets when reboot was pressed

Signed-off-by: Brent Thomson <brentthomson@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41932
2014-08-01 11:19:34 +00:00
John Crispin
6ce44430c9 ar71xx: add RTC feature flag to ar71xx/nand
without this the build for NBG6716 fails due to missing packages

https://dev.openwrt.org/ticket/17325

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41930
2014-08-01 10:32:55 +00:00
Felix Fietkau
8dac6739f8 cns3xxx: add myself as maintainer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41928
2014-08-01 09:23:50 +00:00
Felix Fietkau
2d5de51451 cns3xxx: fix building initramfs and non-initramfs together
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41922
2014-08-01 07:10:00 +00:00
Felix Fietkau
3c7cd63b72 cns3xxx: update to linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41917
2014-07-31 23:40:49 +00:00
Felix Fietkau
6944689e96 orion: fix 3.10 kernel minor version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41916
2014-07-31 23:40:44 +00:00
Felix Fietkau
0426643bd5 cns3xxx: fix initramfs build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41915
2014-07-31 23:40:40 +00:00
Hauke Mehrtens
69c403c234 bcm53xx: update to kernel 3.14
Use kernel 3.14 by default and refresh the patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41913
2014-07-31 21:44:41 +00:00
Hauke Mehrtens
350765676e bcm53xx: add restart support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41912
2014-07-31 21:43:40 +00:00
Hauke Mehrtens
f7b3b7db7d brcm47xx: 3.14: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41911
2014-07-31 21:42:59 +00:00
Hauke Mehrtens
3a82681e4f brcm47xx: 3.10: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41910
2014-07-31 21:40:38 +00:00
Hauke Mehrtens
2b32939040 kernel: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41909
2014-07-31 21:33:58 +00:00
Hauke Mehrtens
b1df24f00e kernel: update bcma to version master-2014-07-29-1
This is a backport of bcma from wireless-tesing/master tag master-2014-07-29-1.

For kernel < 3.10 this only adds the header changes needed by more
recent b43 versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41899
2014-07-30 18:54:10 +00:00
Luka Perkov
f548b18353 kernel: update 3.14 to 3.14.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41898
2014-07-30 15:44:44 +00:00
Felix Fietkau
980e9b5fc2 atheros: remove linux 3.8 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41874
2014-07-29 10:23:59 +00:00
Jonas Gorski
b723119385 brcm63xx: replace nvram_buf with a properly initialized array
Use an empty nvram_header to tell wl that there is no nvram buf.
wl else might try to allocate huge amount of memory because the
bcm63xx's nvram does not match the expected structure and contains
random values.

Fixes the following warning on load of wl:

[    9.152000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x4c/0xc0()
[    9.160000] Modules linked in: wl(P+) wl_glue ipv6 gpio_keys_polled input_polldev button_hotplug input_core
[    9.168000] CPU: 0 PID: 366 Comm: kmodloader Tainted: P             3.10.49 #1
[    9.176000] Stack : 00000000 00000000 00000000 00000000 8034b77a 00000042 81ac9af0 c02e0000
[    9.176000]    8028bf70 802df31b 0000016e 8034af28 81ac9af0 c02e0000 c02e0000 81b39810
[    9.176000]    0000002d 8002c9d4 00000003 8002a3c8 802937a0 c02e0000 8028e528 81ab398c
[    9.176000]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    9.176000]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 81ab3918
[    9.176000]    ...
[    9.212000] Call Trace:
[    9.216000] [<800224b8>] show_stack+0x48/0x70
[    9.220000] [<8002a538>] warn_slowpath_common+0x78/0xa8
[    9.224000] [<8002a5f0>] warn_slowpath_null+0x18/0x24
[    9.228000] [<8008145c>] kmalloc_slab+0x4c/0xc0
[    9.236000] [<80097258>] __kmalloc+0x20/0x10c
[    9.240000] [<80e23b90>] osl_malloc+0x24/0x6c [wl]
[    9.244000] [<80e15288>] nvram_init+0x54/0x164 [wl]
[    9.252000] [<80e08668>] si_pci_fixcfg+0x60c/0x9e8 [wl]
[    9.256000]
[    9.260000] ---[ end trace b5c4dbb046cf3c83 ]---

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41861
2014-07-28 15:31:37 +00:00
John Crispin
c21a20cd78 lantiq: fix dgn3500 and td8970 wifi
ath9k failed to come up due to a bad mac addr

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41860
2014-07-28 15:26:41 +00:00
John Crispin
6fb04ff871 ramips: correct typo ubsphy -> usbphy
This appears to be a typo.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41859
2014-07-28 15:26:36 +00:00
John Crispin
6f6dc62ca2 ramips: fix mode switch gpio for AsiaRF AWM eval board
Fix a typo: gpio 21 is already used for the WPS led.  Gpio 20 is the
right one (tested) for the mode switch.  Confirmed that
/sys/kernel/debug/gpio state followed the position of the switch.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41858
2014-07-28 15:26:32 +00:00
John Crispin
636f2b83e6 ramips: add ethernet macaddr to dts for AWM003-EVB
Follows the pattern of http://patchwork.openwrt.org/patch/5970/

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41857
2014-07-28 15:26:23 +00:00
Jonas Gorski
042fb8eb57 brcm63xx: 3.14: fix ath9k_pci_fixup
Since kernel commit 928bea964827 ("PCI: Delay enabling bridges until
they're needed"), pci fixups are run with bridges (e.g. the pcie port)
disabled.

This causses hangs when ath9k_pci_fixup tries to manually enable the
device to apply the register fixups.

Fix this by enabling any parent bridges before trying to access the
device itself.

Fixes boot on DSL-274XB rev F1.

Reported-by: Matteo Croce <matteo@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41856
2014-07-28 11:12:25 +00:00
John Crispin
3836d40a8a lantiq: fix dgn3500 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41854
2014-07-28 08:06:40 +00:00
Jonas Gorski
1cb1041c55 brcm63xx: Add support for ADB P.DG A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41852
2014-07-27 17:44:59 +00:00
Jonas Gorski
3209fb968e brcm63xx: Add support for Huawei HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41851
2014-07-27 17:44:56 +00:00
Jonas Gorski
c27cb6e0fd brcm63xx: Add support for ZyXEL P870HW-51a v2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41850
2014-07-27 17:44:53 +00:00
Jonas Gorski
b26139eb3f brcm63xx: Add support for Comtrend VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41848
2014-07-27 17:44:48 +00:00
Jonas Gorski
a669d2c528 brcm63xx: Add support for Comtrend VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41847
2014-07-27 17:44:45 +00:00
John Crispin
8c57e2d888 octeon: enable usb and gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41846
2014-07-27 14:52:18 +00:00
John Crispin
43ee42bd05 octeon: add gpio driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41845
2014-07-27 14:52:12 +00:00
John Crispin
13445d2576 octeon: add detection for edgerouter and edgerouter-pro
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41844
2014-07-27 14:52:07 +00:00
John Crispin
694295e7be octeon: fix usb support on edge router pro
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41842
2014-07-26 20:36:32 +00:00
John Crispin
5b4abf87d7 ramips: add support for Kingston MLW221
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41841
2014-07-26 20:36:22 +00:00
John Crispin
b77e92e020 ramips: ethernet mac cleanup
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839
2014-07-26 20:36:09 +00:00
John Crispin
443aee86bf ramips: fix vlan configuration for asiarf avm003
The earlier r41797 change was missing this part, to enable the right
vlan configuration.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41838
2014-07-26 20:36:01 +00:00
John Crispin
08fb5fb326 ramips: fix sysupgrade for asiarf awm003
Since the earlier r41797 change, the board_name for awm003 has been
miscalculated, and sysupgrade has been broken.  This seems to fix it.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41837
2014-07-26 20:35:46 +00:00
Hauke Mehrtens
7a3b3b9d73 brcm47xx: don't create named switch_vlan sections
It doesn't seem to be used anywhere, it's incompatible with other
targets and can be confusing. People may think they need to update
section name every time they change VLAN ID (well, even I was doing
that).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41835
2014-07-26 12:33:48 +00:00
Hauke Mehrtens
009e36806b kernel: remove kernel 3.6
kernel 3.6 is not used by any target any more, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41834
2014-07-26 12:23:56 +00:00
John Crispin
caa671d873 imagebuilder: fix typo that copied grub to the wrong folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41824
2014-07-24 15:46:12 +00:00
Felix Fietkau
ea76a0b78e kernel: annotate bridge multicast backport patch with upstream commits
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41819
2014-07-24 09:19:37 +00:00
Felix Fietkau
dd7650f67c kernel: backport upstream bridge multicast snooping fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41817
2014-07-24 09:12:59 +00:00
Imre Kaloz
dc628f2e08 add support for the archer c5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41814
2014-07-23 12:47:25 +00:00
Imre Kaloz
039fe23f8e refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41812
2014-07-23 11:46:42 +00:00
John Crispin
0b5b8de818 ramips: fix gpio mapping on MZK-750DHP
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41811
2014-07-23 07:49:54 +00:00
John Crispin
e5d4e5dee3 ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 41810
2014-07-23 07:49:50 +00:00
John Crispin
3bb8589787 ar71xx: fix LED configuration for HiWiFi-HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 41809
2014-07-23 07:46:07 +00:00
Hauke Mehrtens
0d3690a202 kernel: update bcma and ssb to version master-2014-07-22
This is a backport of bcma and ssb from wireless-tesing/master tag
master-2014-07-22.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41804
2014-07-22 21:40:41 +00:00
John Crispin
2c356c4bb7 ramips: add a profile for AWM003
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41797
2014-07-22 09:58:21 +00:00
John Crispin
4f5081c911 ar71xx: fix WAN MAC setup on dir-825-c1
Changeset 38690 broke the WAN MAC setup. Here's the fix.

Signed-off-by: Sebastian Kemper <sebastian_ml <at> gmx.net>

SVN-Revision: 41795
2014-07-21 19:26:54 +00:00
John Crispin
6dd7875412 ar71xx: Register reset button on UBNT AirGW
The airGateway has a reset button connected to GPIO 12, so we should use it.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41794
2014-07-21 19:26:50 +00:00
John Crispin
a440524f85 ar71xx: Fix GL.iNet WLAN LED
LED script expects WLAN LED to be "gl-connect:red:wlan".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41793
2014-07-21 19:26:46 +00:00
John Crispin
8295b1f7f2 target/linux/*/image/Makefile: eliminate more LINUX_DIR users
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41792
2014-07-21 18:42:11 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin
941dab02d5 imagebuilder: copy dts folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41790
2014-07-21 18:42:00 +00:00
John Crispin
eae9b2541a ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41788
2014-07-21 18:41:52 +00:00
John Crispin
2b48ee80f9 kernel: refresh 3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41777
2014-07-20 17:31:15 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin
34c9bc0596 ar71xx: create profile and build image for the OpenMesh OM5P board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41775
2014-07-20 17:31:05 +00:00
John Crispin
f68665ac1d ar71xx: enable sysupgrade for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41772
2014-07-20 17:30:52 +00:00
John Crispin
e50abb5d53 ar71xx: add user-space support for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41770
2014-07-20 17:30:44 +00:00
John Crispin
f424994cbc ar71xx: add kernel support for the OpenMesh OM5P board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41769
2014-07-20 17:30:32 +00:00
John Crispin
4d22954db0 ramips: fix mac address partitions on ASL-26555
ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on  uboot-env corresponds to D-Link.
ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41768
2014-07-20 17:30:28 +00:00
John Crispin
7388053ba3 ar71xx: add RB91x boards to uci-defaults 02_network
The default case in 02_network is inappropriate for the MikroTik RouterBOARD 91x boards because they do not have a WAN port, so don't bother setting the non-existent eth1 interface as the WAN port.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41767
2014-07-20 17:30:24 +00:00
John Crispin
d19530c693 ar71xx: Add UBNT airGateway support
This patch adds support for the Ubiquiti Networks airGateway.

Based in part on code posted by David Hutchison <dhutchison@bluemesh.net> on openwrt-devel:
  https://lists.openwrt.org/pipermail/openwrt-devel/2013-December/023035.html

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41766
2014-07-20 17:30:17 +00:00
Hauke Mehrtens
e23f27b72d orion: Update kernel to 3.10.44
Update the kernel of the orion target to version 3.10.44.
Refresh orion config and patches to match the changes in the kernel

Tested on WRT350N-v2 device.

Signed-off-by: Maarten Bezemer <maarten.bezemer@gmail.com>
[run make kernel_oldconfig, fold a01-dt2-fixes-for-3.3.patch into dt2-setup.c,
 make dt2-setup.c compile, fix harddisk subprofile]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41765
2014-07-20 09:42:14 +00:00
Felix Fietkau
c718d0b10c x86: remove the arbitrary limitation of vmware/virtualbox images to ext4, select TARGET_IMAGES_PAD instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41763
2014-07-20 08:18:50 +00:00
Imre Kaloz
7e2c4d5732 extract and fixup the board.bin on the archer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41757
2014-07-19 13:20:14 +00:00
Hauke Mehrtens
6f6b8feae6 pxa: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41737
2014-07-18 20:45:49 +00:00
Hauke Mehrtens
5a331a91aa cobalt: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41736
2014-07-18 19:03:16 +00:00
Felix Fietkau
1d232f354a kernel: mtd: allow partial block erase
This fixes error erasing partial mtd partition which does not start on
eraseblock boundary and allows using fconfig to configure redboot on
devices such as the Gateworks Cambria.

Signed-off-by: Maciej Skrzypek <maciej.skrzypek@flytronic.pl>

SVN-Revision: 41733
2014-07-18 14:36:38 +00:00
Hauke Mehrtens
7435b628c6 brcm47xx: fix switch detection with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41706
2014-07-17 20:34:18 +00:00
Felix Fietkau
daae0b7c93 kernel/3.1{3, 4}: fix AMD USB HDC wakeup quirk disabling
Declare inline placeholder when usb_hcd_amd_remote_wakeup_quirk() not
compiled due CONFIG_PCI_DISABLE_COMMON_QUIRKS.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41702
2014-07-17 16:44:04 +00:00
Felix Fietkau
5e0bd41bbe atheros: update macroses names
Use AR2315_ prefix for macroses specific to AR2315/AR2316/AR2317 chips,
use AR5312_ prefix for macroses specific to AR5312/AR2312/AR2313 chips,
and use AR231X_ prefix for common macroses.

This patch should not cause any functional changes, only make clear
which macros is common and which macros is specific.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41701
2014-07-17 16:36:55 +00:00
Felix Fietkau
04f3012fba atheros[uart]: pass only physical I/O mem address to 8250 driver
Pass only physical address to 8250 serial port driver and set flag to
remap I/O memory inside the driver. Also fix AR5312 UART base address
definition, which seems specified already mapped.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41700
2014-07-17 16:36:52 +00:00
Felix Fietkau
e744878636 atheros[uart]: use 32-bit aligned I/O
Use 32-bit aligned I/O and update base UART address (remove +3 offset).

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41699
2014-07-17 16:36:49 +00:00
Felix Fietkau
572b532e6a atheros[ar231x-eth]: pass PHY I/O memory via device resources
Pass PHY I/O memory region via platform resources and remap them
unconditionally.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41698
2014-07-17 16:36:46 +00:00
Felix Fietkau
9041410017 atheros[ar231x-eth]: pass phys address of I/O memory via platform res
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41697
2014-07-17 16:36:43 +00:00
Felix Fietkau
a145d0410b atheros: simplify gpiolib realization
Each SoCs generation has own independent gpiolib realization, so we
have no reason to keep these realizations in semiuniversal form.
Following modifications are made:
 * Remove valid_mask field
 * Remove ar231x_gpio_chip structure
 * Rename AR2315_GPIO_CR to AR2315_GPIO_DIR
 * Fix count of AR5312 GPIOs
 * Simplify gpio_chip methods realization

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41696
2014-07-17 16:36:39 +00:00
Felix Fietkau
82e4cde1ce atheros: use irq_set_chained_handler()
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41695
2014-07-17 16:36:36 +00:00
Felix Fietkau
0a785ebb7d atheros: simplify AR2315 misc IRQ (un)masking
Currently AR5312 misc IRQ numbers are used for AR2315+ chips, what cause
us to use switch-case to map IRQ number to ISR bit. Introduce AR2315
specific misc IRQs set and simplify interrupt (un)mask operation.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41694
2014-07-17 16:36:33 +00:00
Felix Fietkau
d29b61b5f0 atheros: rename some interrupt control handlers
Rename interrupt control handlers to be consistent with operation names
and add IRQ chips names.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41693
2014-07-17 16:36:30 +00:00
Felix Fietkau
fceb7f7045 atheros: move AR2315 misc IRQ dispatching to separate function
Align code with AR5312 realization.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41692
2014-07-17 16:36:26 +00:00
Felix Fietkau
5c030111a9 atheros: pass UART IRQ number via function argument
UART IRQ number could be different for different SoCs, so make them
configurable.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41691
2014-07-17 16:36:23 +00:00
Felix Fietkau
e819113e2e atheros[ar231x-eth]: move driver to atheros subdirectory
Move driver code to respective vendor subdirectory and fix config
symbol name.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41690
2014-07-17 16:36:19 +00:00
Felix Fietkau
6be418e3e1 atheros[ar231x-eth]: update MAC and PHY reset method
Pass reset_set and reset_clear callback functions pointers via
platform_data instead of reset register address.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41689
2014-07-17 16:36:16 +00:00
Felix Fietkau
4f05d696ad atheros[ar2315-wdt]: update I/O handling
* Pass iomem and IRQ via platform device resources
 * Remap iomem and use iowrite32 accessor function

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41688
2014-07-17 16:36:13 +00:00
Felix Fietkau
5ea0cff89c atheros[ar2315-wdt]: update interrupt handling
Acknowledge watchdog interrupt in arch irq dispatcher and remove odd
watchdog enable call from probe function.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41687
2014-07-17 16:36:10 +00:00
Felix Fietkau
d0f9972f1c atheros: use correct address space and pointer type for register access
Make sparse happy :)

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41686
2014-07-17 16:36:07 +00:00
Felix Fietkau
579481b4f5 atheros[ar2315-wdt]: rename config symbol
Rename config symbol to AR2315_WDT to avoid confusion with other Atheros
SoCs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41685
2014-07-17 16:36:03 +00:00