Commit Graph

24 Commits

Author SHA1 Message Date
Mathias Kresin
98c003e3da lantiq: ARV752DPW22: fix wireless mac address
The ARV752DPW22 has the same generic mac address in the EEPROM as it
was already noticed for other lantiq boards using a ralink wireless.

Use the base mac address from the boardconfig partition as it is done
by the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-18 22:14:25 +02:00
Hauke Mehrtens
d8dde8c517 lantiq: fix console print
The boot loader of many boards provides a kernel boot argument with a
broken console parameter to the kernel. This will be taken before the
stdout-path defined in device tree and the serial will not work on this
board. Multiple boards are affected by this problem, so revert this
patch for all boards. Later we can remove the boot arguments from the
device tree again, after the individual board was checked to work.

This partly reverts this commit:
commit 4995c64857
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Sun Dec 11 21:55:00 2016 +0100

    lantiq: specify console using stdout-path instead of cmdline argument

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-05 23:10:44 +01:00
Martin Blumenstingl
6b94234a65 lantiq: remove "init" kernel command line parameter from bootargs
/etc/preinit has been the default init-script for a very long time (at
least since Linux 2.6.30 in OpenWrt). Remove the kernel command line
"init" parameter to get rid of duplicate and inconsistent definitions
of this parameter (some boards, like FRITZ3370 for example did not use
it at all, while it's just copy and paste on others).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00
Martin Blumenstingl
4995c64857 lantiq: specify console using stdout-path instead of cmdline argument
Use devicetree's /chosen/stdout-path instead of the kernel command line
(embedded in the .dts-files) to specify the serial console. Using the
chosen node is recommended on devicetree based platforms.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00
Mathias Kresin
18c64f41c7 treewide: fix button keys codes used in dts
Use keycodes that matches the intended use case based on the label.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:34:23 +01:00
Mathias Kresin
2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00
Mathias Kresin
7fd5171a34 lantiq: use the device tree bindings from rt2x00 driver
Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00
Mathias Kresin
112cf52d45 lantiq: cleanup dts files
- remove not existing properties
- remove properties having the same values as the included dtsi
- remove nodes which are disabled in the included dtsi and not enabled
  in dts
- replace the deprecated pinctrl-* compatible strings
- use the same labels for nodes as the included dtsi
- move common used vr9 pci properties to vr9.dtsi
- remove the unused stp node from HomeHub 2B devcie tree source file
- fix spaces vs. tabs and remove superfluous linebreaks

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-03 19:00:28 +01:00
Andreas Eberlein
eba84bee4c lantiq: Sanitize device tree files
The device tree file of ARV752DPW uses numbers/hex values for gpio states and input event codes.

This cleans it up and uses the available macros from header files. This way the functions are easier to read and comprehend.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
[sanitize all device tree files]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-19 19:55:04 +02:00
Mathias Kresin
116adaa3a4 lantiq: fixup last commits
Revert the rename of unrelated device tree nodes. Rename the missed
leds of the Speedport W 504V Typ A.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 20:26:35 +02:00
Mathias Kresin
7659f9ad9e lantiq: fix usb leds/trigger
Add USB led aliases to boards having an led which is meant to be used
as USB led according to the manuals.

Remove the kmod-ledtrig-usbdev from the default package selection for
boards not having an USB led. Add the kmod-ledtrig-usbdev to boards
where it is missing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin
e07c80dfc8 lantiq: use aliases device tree node for leds
The chosen node is clearly the wrong place for aliases.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Mathias Kresin
91d5067091 lantiq: use the etop driver DT bindings only
Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
Mathias Kresin
1b7d6583a5 lantiq: fix mac address increments
Use the same mac address increment in device tree source file and
userspace.

Don't add a mac address increment to either the only mtd mac-address or
to all mac-addresses.

Fix a typo in the TDW89X0.dtsi file to add an increment.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00
blogic
b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00
John Crispin
aa99acdb46 lantiq: ARV752DPW22 - fix dts file
No need to switch (and keep) on all leds at boot. Use the same led
logic and labels as the OEM firmware (red = okay, blue = failure).

Add the red internet led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48035
2016-01-01 21:17:55 +00:00
John Crispin
cd668944ef lantiq: add wifi eep to a803 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
John Crispin
0782501483 lantiq: update dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
John Crispin
288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00