Commit Graph

2039 Commits

Author SHA1 Message Date
Rosen Penev
875e17774b tools/meson: backport WSL2 fix
For some reason, Microsoft's Plan9 driver returns IOError on missing
file.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-10-02 16:05:32 +02:00
Christian Marangi
ebabdff401
tools: add option BUILD_ALL_HOST_TOOLS to compile all host tools
Add option to compile all host tools even if not needed.
This can be useful to prepare a universal precompiled host tools
archive to use in another buildroot and speedup compilation.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2022-09-30 22:26:54 +02:00
Rosen Penev
0e3d51ccae tools/cmake: fix compilation with host libzstd-dev
cmake's find_package looks at host paths first for some reason. Switch
to using pkgconfig for the search, matching other modules.

Fixes: 3848cf458e ("tools/cmake: Build without some included libs")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-30 13:12:42 -07:00
Rosen Penev
3848cf458e
tools/cmake: Build without some included libs
Saves a little bit of time when compiling cmake.

Added patches to fix searching liblzma and zlib. The issue is that
because pkgconfig is not used, the system libraries get used.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-29 19:33:17 +02:00
Rosen Penev
89df3589e6
tools/expat: build with autotools again
Allows to set expat as a dependency to cmake and save on compilation
time.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-29 19:33:17 +02:00
Rosen Penev
d602e7a969
tools/zlib: switch to configure script
A future commit will make tools/cmake use this.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-29 19:33:13 +02:00
Rosen Penev
b71affaf8b tools: fix firmware-utils depends
When firmware-utils was converted to use cmake, the dependency was not
updated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-27 15:35:41 -07:00
Christian Marangi
6e90cb60e4
Revert "tools/zstd: build libraries as static"
This reverts commit e3989094b8.
Require more testing as it does cause compilation error.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2022-09-27 23:17:51 +02:00
Rosen Penev
e3989094b8
tools/zstd: build libraries as static
Enables to get rid of rpath hack for all users.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-27 21:28:49 +02:00
Nick Hainke
83ea2e11b4
ccache: update to 4.6.3
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_6_3

Refresh patch:
- 100-honour-copts.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-27 18:22:31 +02:00
Nick Hainke
ac61cf596c
tools/ccache: update to 4.6.2
Release notes:
https://ccache.dev/releasenotes.html#_ccache_4_6_2

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-27 18:22:30 +02:00
Nick Hainke
2e87e24e43
tools/ccache: update to 4.6.1
Release notes:
https://ccache.dev/releasenotes.html#_ccache_4_6_1

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-27 18:22:27 +02:00
Michael Pratt
1e726ba015 tools/cmake: fix download url with make variables
Use a make variable pattern for the url
so that only one version number needs to be changed
when version is bumped.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
2022-09-19 17:30:16 -04:00
Ilya Katsnelson
21dfd7289b
tools/bc: use more compatible shebang
Update the existing patch to use a shebang that works on systems that
don't have a /bin/bash, e.g. NixOS or GuixSD.

Signed-off-by: Ilya Katsnelson <me@0upti.me>
2022-09-14 00:06:15 +02:00
Daniel Golle
b4d8114770 firmware-utils: update to git HEAD
0c92b20 iptime-crc32: add support for A6004MX

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-12 01:43:49 +01:00
Hauke Mehrtens
600741bf2e firmware-utils: update to git HEAD
71e1db6 tplink-safeloader: add TP-Link Deco S4 v2 support

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-09-11 21:54:00 +02:00
Daniel Golle
a99707d14c Revert "tools/meson: update to 0.63.1"
This reverts commit da95084d34.
It was pulled by accident.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-07 04:47:04 +01:00
Nick Hainke
8ad03a2cd7 tools/llvm: update to 14.0.6
Update to latest version.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:40 +01:00
Nick Hainke
da95084d34 tools/meson: update to 0.63.1
Release Notes:
- 0.62.0 https://mesonbuild.com/Release-notes-for-0-62-0.html
- 0.63.0 https://mesonbuild.com/Release-notes-for-0-63-0.html
- (other notes are not available)

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:40 +01:00
Nick Hainke
f94b67d893 tools/fakeroot: update to 1.29
Release Notes:
8dd9e34a2e

Refresh patches:
- 400-alpine-libc.musl-fix.patch
- 600-macOS.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:40 +01:00
Nick Hainke
46dc7e63c4 tools/expat: update to 2.4.8
Release Notes:
https://github.com/libexpat/libexpat/blob/R_2_4_8/expat/Changes

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:39 +01:00
Nick Hainke
7b8f2dc6ec tools/bc: update to 1.07
Update to latest version. Replace mirror with @GNU/bc.

Manually refresh:
- 001-no_doc.patch

Add patch found here:
26f275502d
as 002-fix-libmath.patch to fix compilation.

Add another patch found here:
55b26eda94
as 003-bc-fix-hang.patch to prevent a hang when building the kernel.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:39 +01:00
Nick Hainke
534e72ea0f tools/pkgconf: update to 1.9.3
Release Notes:
https://github.com/pkgconf/pkgconf/blob/pkgconf-1.9.3/NEWS

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:39 +01:00
Nick Hainke
e12504a4d0 tools/cmake: refresh patches
Previous commit forgot to refresh the patches.
This commit refreshes the patches:
- 120-curl-fix-libressl-linking.patch
- 130-bootstrap_parallel_make_flag.patch

Fixes: 3b2f19271c ("tools/cmake: update to 3.24.1")

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-07 04:22:39 +01:00
Nick Hainke
3f6d66d984 tools/bc: add PKG_CPE_ID
Add CPE ID for tracking CVEs.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-09-06 16:35:02 +01:00
Petr Štetiar
88c9056a70 tools: remove xxd package
It shouldn't be needed anymore as we've now `scripts/xxdi.pl`, which
should be self contained and fully compatible `xxd -i` replacement.

Fixes: #10555
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-09-06 08:04:53 +02:00
Daniel Golle
8686a9a085 tools: mkimage: Add support for MediaTek MT798x
Import pending patches for mtk_image to support BootROM headers of
newer MediaTek SoCs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-28 19:01:55 +01:00
Nick Hainke
3b2f19271c tools/cmake: update to 3.24.1
Update cmake to newest version.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-20 23:26:36 +02:00
Nick Hainke
ce3e467d61 tools/isl: update to 0.25
Update isl to latest version.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-20 23:25:52 +02:00
Nick Hainke
20f8101a26 tools/xz: update to 5.2.6
This update contains a security fix to xzgrep (CVE-2022-1271,
ZDI-CAN-16587). Release notes:
https://git.tukaani.org/?p=xz.git;a=blob;f=NEWS;hb=HEAD

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-08-20 23:25:32 +02:00
Hauke Mehrtens
67efb6a661 tools: mtd-utils: Update to version 2.1.4
Update to most recent version of mtd-utils and sync with version from
package folder.

Use a https download server instead of ftp.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-13 14:05:29 +02:00
Hauke Mehrtens
3efe595df9 tools: elfutils: Update to version 0.187
Update to most recent version of elfutils and sync with version from
package folder.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-13 14:05:29 +02:00
Hauke Mehrtens
d73e11b9c8 tools: e2fsprogs: Update to version 1.46.5
Update to most recent version of e2fsprogs and sync with version from
package folder.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-13 14:05:29 +02:00
Daniel Golle
68cd4dc3ed mkimage: fix validation of legacy images with custom magic
All images generated by mkimage are now always validated.
This change broke our downstream support for setting a custom value for
IH_MAGIC (mkimage -M ...). Make sure also plain legacy kernel images
with custom value set for IH_MAGIC validate correctly.

Fixes: fa9895ee5b ("tools: mkimage: update to U-Boot release 2022.07")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-12 12:02:41 +02:00
Daniel Golle
fa9895ee5b tools: mkimage: update to U-Boot release 2022.07
Removed patch 090-macos-arm64-builing-fix.patch as an equivalent
solution was applied upstream:
 3b142045e8 Support building on macOS/arm64

To not add new host dependencies (libuuid, gnuTLS) don't build the
anyway unused mkeficapsule tool which would otherwise now be built
by default.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-11 17:11:54 +02:00
Leonardo Mörlein
37c0d15a8e pkg-config: always use correct path for pkg-config.real
Before this commit, it was assumed that pkg-config.real is in the PATH. While
this was fine for the normal build workflow, this led to some issues if

    make TOPDIR="$(pwd)" -C "$pkgdir" compile

was called manually. The command failed with

    Makefile:15: *** No libnl-tiny development libraries found!.  Stop.
    make[1]: Leaving directory

since pkg-config of the host system was used.

After the commit, the package is built sucessfully.

Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
2022-08-11 12:47:31 +02:00
Michael Pratt
7012f2e18f tools/libressl: disable assembly code for all hosts
This SSL library is for hosts only
and not shipped as a build product,
therefore its performance quality (speed) is not critical.

Assembly code is broken in LibreSSL for some x86_64 hosts (part of git history)
and for some RISC host archs like armv7l, aarch64, powerpc, ppc64, etc...
so let's just disable it for all hosts.

For example, this fixes an instance on ARM hosts
where the host Python 3 builds broken modules which link to LibreSSL,
even with patches that enable LibreSSL support
with the import error "unexpected reloc type 3".

Ref: a395563f6 ("build: fix libressl build on x32 (amd64ilp32) host ")
Suggested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
2022-07-31 18:46:23 +02:00
Michael Pratt
b2e2deeb8d tools/libressl: ensure PIC-only object compilation
Line up configure arguments for cleaner git diff and editing and grepping.

LibreSSL must be built with PIC, and has the flags for it already in CFLAGS.
Add the configure option native to LibreSSL to use only PIC in objects,
which further enforces that each object in the library has the PIC flag
to prevent a mixture of PIC / non-PIC objects within it.

Ref: 96a940308 ("tools: libressl: always build as PIC")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
2022-07-31 18:46:23 +02:00
Sander Vanheule
1011904199 tools: bump 7z package to 22.01
Version 22.00 of 7z causes build failures on systems using GCC 12 with
the following error:

    ../../../../C/LzmaEnc.c: In function 'LzmaEnc_CodeOneMemBlock':
    ../../../../C/LzmaEnc.c:2996:19: error: storing the address of local
    variable 'outStream' in '*p.rc.outStream' [-Werror=dangling-pointer=]
     2996 |   p->rc.outStream = &outStream.vt;
          |   ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
    ../../../../C/LzmaEnc.c:2979:28: note: 'outStream' declared here
     2979 |   CLzmaEnc_SeqOutStreamBuf outStream;
          |                            ^~~~~~~~~
    ../../../../C/LzmaEnc.c:2979:28: note: 'pp' declared here

Upgrade to version 22.01 which contains the required fix.

Fixes: 5fcc6f0f19 ("tools: add 7z host package")
Suggested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-07-31 15:29:39 +02:00
Nick Hainke
4538638022 mtools: update to 4.0.40
Changes:
- Remove libbsd dependency
- Better compatibility with legacy platforms such as AT&T UnixPC
- Upgraded to autoconf 2.71

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-07-30 23:50:44 +02:00
Daniel Golle
aeaa02afac firmware-utils: update to git HEAD
4f8d03d mkh3cimg: add image tool for H3C devices
 2483fe7 mkh3cvfs: add filesystem tool for H3C devices

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-28 16:44:50 +02:00
Jan Hoffmann
5fcc6f0f19 tools: add 7z host package
Add the 7zr command line tool, which is a version of the 7z application
that only supports 7z archives.

7z is one of the two compression formats supported in H3C firmware
images (the alternative would be ARJ).

(Alternatively, the 7zr command line tool could also be built from a
current version of the public-domain LZMA SDK. That would require
repackaging the source package, as it is only provided in 7z format.)

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2022-07-28 14:08:56 +02:00
Andre Heider
5451b03b7c tools/libressl: bump to v3.5.3
This includes API additions required for u-boot v2022.07 and Python 3.10.

https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.5.0-relnotes.txt
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.5.1-relnotes.txt
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.5.2-relnotes.txt
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.5.3-relnotes.txt

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-07-20 13:02:57 +02:00
Leonardo Mörlein
ffd9bd7b9b
automake: always use correct path for aclocal.real
Before this commit, it was assumed that aclocal.real is in the PATH. While
this was fine for the normal build workflow, this led to some issues if

    make TOPDIR="$(pwd)" -C "$pkgdir" compile

was called manually. The command failed with:

    /home/.../openwrt/staging_dir/host/bin/aclocal: line 2: aclocal.real: command not found
    autoreconf: /home/.../openwrt/staging_dir/host/bin/aclocal failed with exit status: 127

After the commit, the package is built sucessfully.

Signed-off-by: Leonardo Mörlein <me@irrelefant.net>
2022-07-14 12:57:12 +02:00
Felix Fietkau
9dc86d1962 tools/coreutils: enable ginstall utility
For some reason, current coreutils version installed on x86 macOS via homebrew
have a bug, where at least the cc1 binary from gcc gets corrupted during install
to the staging dir.
Using the install utility from tools/coreutils fixes this

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-13 17:57:34 +02:00
Sander Vanheule
6445415809 firmware-utils: bump to git HEAD
The support-list partition for the EAP225-V3 board ID became larger than
the allocated size, resulting in factory image generation for the
EAP225-Outdoor v3 and EAP225 v3 to fail. The make directive
Build/tplink-safeloader ignores this failure however, resulting in a
seemingly successful build with empty factory images.

Included changes:
    e609c5d75186 tplink-safeloader: drop unqualified EAP225-V3 IDs

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-27 21:56:20 +02:00
Rosen Penev
d60cfa5a9e tools/meson: update to 0.61.5
Mostly backports by a Red Hat employee as 0.62 and newer demands Python
3.7+. Same reason 0.61 is kept here.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-06-27 00:57:15 +02:00
Sander Vanheule
326e109f24 firmware-utils: bump to git HEAD
Fixes the safeloader model identifiers for EAP225-Outdoor v1/v3 devices.

1e3d47292b2e tplink-safeloader: fix EAP225-Outdoor model IDs
9563fe8e78cb tplink-safeloader: add regionless EAP225-V3 IDs

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-26 16:58:05 +02:00
Josef Schlehofer
25534d5cc2 tools/libressl: update to version 3.4.3
Release notes:
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.4.3-relnotes.txt

```
It includes the following security fix:

    * A malicious certificate can cause an infinite loop.
      Reported by and fix from Tavis Ormandy and David Benjamin, Google.
```

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-06-19 12:31:02 +02:00
Rosen Penev
a7be143646 tools/ninja: update to 1.11.0
Updated patchset to latest.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-06-13 19:50:25 +02:00
Daniel Golle
3fbf9689b6
tools/mkimage: increase tmpfile name length limit
mkimage limits the length of the file paths in can deal with to 256
characters. Turns out that in automated builds by asu we break this
limit, so increase it to 1024 characters.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-06-05 11:32:58 +01:00
Sander Vanheule
acca36f71f firmware-utils: bump to git HEAD
Fixes an out of bounds issue, adds support for TP-Link safeloader images
with non-default partition names, and adds image generation support for:
  - TP-Link Archer A6 v2 (EU)
  - TP-Link EAP225 v4
  - TP-Link EAP225-Outdoor v3

365458e00ed7 tplink-safeloader: join EAP225-V3 compatible devices
0277810d353d tplink-safeloader: fix chunked support-list prints
a64f89c66318 tplink-safeloader: Patch to handle partitions with alternate names.
07f78f071075 firmware-utils: tplink-safeloader: add support for Archer A6 v2 (EU)
49ea62160d21 tplink-safeloader: fix alphabetical order

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-05-27 10:20:03 +02:00
Stijn Tintel
6eec1a5225 tools/elfutils: drop HOST_BUILD_DEPENDS
This is only effective for host build of normal packages, not tools.

Fixes: ad79b92719 ("elfutils: move host build to tools")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-05-19 02:37:25 +03:00
Stijn Tintel
f64bd4b6ce tools/elfutils: only build required components
Building all of the components results in strip being installed in
staging_dir/host/bin. This strip binary will take precedence over
binutils strip that is installed in the toolchain directory.

This will not work on host systems that do not have libdw installed, as
we do not set HOST_LDFLAGS to override rpath to staging_dir/host/lib.
However, rather than overriding rpath, we should just avoid using
elfutils strip entirely.

Override the SUBDIRS variable in the Makefile to only build and install
the libraries we require for dwarves and frr.

Fixes the following build failure in toolchain/gdb:
strip: error while loading shared libraries: libdw.so.1: cannot open shared object file: No such file or directory

Fixes: ad79b92719 ("elfutils: move host build to tools")
Reported-by: Dominick Grift <dominick.grift@defensec.nl>
Reported-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-05-19 02:36:48 +03:00
Stijn Tintel
16e9ccd5fa tools/elfutils: depend on m4
Some buildbots fail to build elfutils due to m4 being missing. Add m4 as
a dependency for elfutils to fix this.

Fixes: ad79b92719 ("elfutils: move host build to tools")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-05-18 16:17:35 +03:00
Tony Ambardar
02850d7c9c tools/dwarves: add host package
dwarves is a set of tools that use the debugging information inserted in
ELF binaries by compilers such as GCC. Utilities in the dwarves suite
include pahole, which can be used to find alignment holes in structs and
classes, and also extracts other information such as CPU cacheline
alignment, helping pack those structures to achieve more cache hits.

These tools are also used to encode and read the BTF type information
format used with the bpf syscall, making this a Linux build dependency
when using kernel BTF information.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[bump to 1.23, add elfutils dep, drop host lib usage, drop cmake release
target, use RM macro]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-05-18 13:32:06 +03:00
Stijn Tintel
ad79b92719 elfutils: move host build to tools
The upcoming dwarves host package requires elfutils. As dependencies for
tools must exist in tools, we need to move elfutils host build there.

As there is at least one package that depends on this, and there is no
proper way to create such dependency in the build system, build it
unconditionally when not building on macOS.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-05-18 13:32:06 +03:00
Sander Vanheule
0f207ade12 firmware-utils: bump to git HEAD
Includes image support for new TP-Link devices:

  ddc3e00e314d tplink-safeloader: add TP-Link EAP265 HD support
  ceea1a7fe56e tplink-safeloader: add TP-Link Deco M4R v1 and v2 support

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-04-27 20:29:37 +02:00
Hauke Mehrtens
36790ca694 firmware-utils: bump to git HEAD
05fd700 tplink-safeloader: TP-Link RE650 v2 support

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-04-23 21:58:46 +02:00
Daniel Golle
08ebc3881d
mtools: update to version 4.0.39
Improvements since the 4.0.38 release are:
 - Rename strtoi to strosi (string to signed int). The strtoi
   function on BSD does something else (returns an intmax, not
   an int)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-15 01:18:28 +01:00
Rosen Penev
19f3fcc884 tools/meson: update to 0.61.4
Override python to use the one in host instead of hostpkg. There's no
need to use the latter.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-04-09 15:56:04 +02:00
leo chung
56f091d467 tools/cmake: fix download url
fix the cmake.org download url

Signed-off-by: leo chung <gewalalb@gmail.com>
2022-04-09 15:56:04 +02:00
Paul Spooren
5959c46456 tools: SOURCE_DATE_EPOCH handling for mkfs.fat
Backport upstream patch to have reproducible FAT signatures.
This should enable reproducibility for x86 EFI images.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-03-31 00:56:34 +01:00
Petr Štetiar
9d8f620679 tools/zlib: bump to latest stable release 1.2.12 (CVE-2018-25032)
List of changes since previous release from 2018 is quite long:

 * Fix crc32.c to compile local functions only if used.
 * Check for cc masquerading as gcc or clang in configure.
 * Remove destructive aspects of make distclean.
 * Separate out address sanitizing from warnings in configure.
 * Eliminate use of ULL constants.
 * Add fallthrough comments for gcc.
 * Clean up minizip to reduce warnings for testing.
 * Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner)
 * minizip warning fix if MAXU32 already defined. (gvollant)
 * Replace black/white with allow/block. (theresa-m)
 * Fix indentation in minizip's zip.c.
 * Improve portability of contrib/minizip.
 * Correct typo in blast.c.
 * Change macro name in inflate.c to avoid collision in VxWorks.
 * Clarify gz* function interfaces, referring to parameter names.
 * Fix error in comment on the polynomial representation of a byte.
 * Fix memory leak on error in gzlog.c.
 * Avoid adding empty gzip member after gzflush with Z_FINISH.
 * Explicitly note that the 32-bit check values are 32 bits.
 * Use ARM crc32 instructions if the ARM architecture has them.
 * Add use of the ARMv8 crc32 instructions when requested.
 * Correct comment in crc32.c.
 * Don't bother computing check value after successful inflateSync().
 * Use atomic test and set, if available, for dynamic CRC tables.
 * Speed up software CRC-32 computation by a factor of 1.5 to 3.
 * Add crc32_combine_gen() and crc32_combine_op() for fast combines.
 * Add tables for crc32_combine(), to speed it up by a factor of 200.
 * Fix the zran.c example to work on a multiple-member gzip file.
 * Add gznorm.c example, which normalizes gzip files.
 * Show all the codes for the maximum tables size in enough.c.
 * Clarify that prefix codes are counted in enough.c.
 * Use inline function instead of macro for index in enough.c.
 * Clean up code style in enough.c, update version.
 * Use a macro for the printf format of big_t in enough.c.
 * Use a structure to make globals in enough.c evident.
 * Assure that the number of bits for deflatePrime() is valid.
 * Fix a bug that can crash deflate on some input when using Z_FIXED.
 * Correct the initialization requirements for deflateInit2().
 * Emphasize the need to continue decompressing gzip members.
 * Add legal disclaimer to README.
 * Fix deflateEnd() to not report an error at start of raw deflate.
 * Remove old assembler code in which bugs have manifested.
 * Make the names in functions declarations identical to definitions.
 * Avoid an undefined behavior of memcpy() in _tr_stored_block().
 * Avoid undefined behaviors of memcpy() in gz*printf().
 * Avoid an undefined behavior of memcpy() in gzappend().
 * Avoid the use of ptrdiff_t.
 * Handle case where inflateSync used when header never processed.
 * Don't compute check value for raw inflate if asked to validate.
 * Add address checking in clang to -w option of configure.
 * Return an error if the gzputs string length can't fit in an int.
 * Small speedup to inflate [psumbera].
 * Update use of errno for newer Windows CE versions.
 * Avoid some conversion warnings in gzread.c and gzwrite.c.
 * Have Makefile return non-zero error code on test failure.
 * Avoid a conversion error in gzseek when off_t type too small.
 * Fix CLEAR_HASH macro to be usable as a single statement.
 * Fix bug when window full in deflate_stored().
 * Limit hash table inserts after switch from stored deflate.
 * Permit a deflateParams() parameter change as soon as possible.
 * Cygwin does not have _wopen(), so do not create gzopen_w() there.

Removed 006-fix-compressor-crash-on-certain-inputs.patch which was
hotfix for CVE-2018-25032 and is now included in this release.

This release is not available on @SF (yet?) so the sources are now
pulled from GitHub.

Fixes: CVE-2018-25032
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-28 09:27:56 +02:00
Petr Štetiar
b3aa2909a7 zlib: backport security fix for a reproducible crash in compressor
Tavis has just reported, that he was recently trying to track down a
reproducible crash in a compressor. Believe it or not, it really was a
bug in zlib-1.2.11 when compressing (not decompressing!) certain inputs.

Tavis has reported it upstream, but it turns out the issue has been
public since 2018, but the patch never made it into a release. As far as
he knows, nobody ever assigned it a CVE.

Suggested-by: Tavis Ormandy <taviso@gmail.com>
References: https://www.openwall.com/lists/oss-security/2022/03/24/1
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-24 08:15:24 +01:00
Rosen Penev
9c290ad498 tools/ccache: update to 4.6
Full changelog: https://ccache.dev/releasenotes.html#_ccache_4_6

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 19:24:13 +01:00
Rosen Penev
9a44bc78b4 tools/fakeroot: update to 1.28
Refreshed patches.

Upstream says there's only a bugfix for GNU Hurd.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 19:24:13 +01:00
Rosen Penev
f88a6da020 tools/cmake: update to 3.22.3
Seems to be mostly pthread fixes.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 19:24:13 +01:00
Rosen Penev
7f92046dff tools/mtools: update to 4.0.38
No real changelog available.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 19:24:13 +01:00
Rosen Penev
cca5367f27 tools/expat: enable DTD
Fixes gdb usage, which depends on it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 10:10:30 +01:00
Rosen Penev
3150e8bf3e tools/expat: update to 2.4.7
Mostly a bug fix to the bug fix to CVE-2022-25236

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-13 10:10:30 +01:00
Sungbo Eo
4f3a565f5d tools: zip: make encrypted archives reproducible
Zip always try to generate new encryption header depending on execution
time and process id, which is far from being reproducible. This commit
changes the zip srand() seed to a predictable value to generate
reproducible random bytes for the encryption header. This will compromise
the goal of secure archive encryption, but it would not be a big problem
for our purpose.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-03-09 15:38:23 +09:00
Sungbo Eo
39d06472eb tools: zip: fetch SOURCE_DATE_EPOCH directly
Remove "--mtime" option introduced in commit 18c9faa032 ("tools: zip:
add option for reproducible archives") and instead fetch SOURCE_DATE_EPOCH
environment variable directly in the code.

Ref: https://sourceforge.net/p/infozip/patches/25/
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-03-09 15:38:23 +09:00
Felix Fietkau
545cabee9e tools/fakeroot: restore macos bugfix that was dropped during the last update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-05 16:58:58 +01:00
Josef Schlehofer
495c4f4e19 tools/libressl: update to version 3.4.2
Release notes:
https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.4.2-relnotes.txt

```
It includes the following security fix

  * In some situations the X.509 verifier would discard an error on an
    unverified certificate chain, resulting in an authentication bypass.
    Thanks to Ilya Shipitsin and Timo Steinlein for reporting.
```

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-03-01 00:08:08 +01:00
Huangbin Zhan
4a19cf3bc7 tools/mkimage: update to 2022.01
- enable dot config
- enable openwrt verbose
- add bison as dependency to avoid failure
```
  bison -oscripts/kconfig/zconf.tab.c -t -l scripts/kconfig/zconf.y
bison: /builder/shared-workdir/build/staging_dir/host/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
```

Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
40f91f6a2f tools/fakeroot: update to 1.27
Remove macOS stuff. Upstream has fixed it in the same way.

Add SOL_TCP define. Taken from elsewhere in the code.

Refreshed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
4e13229dd1 tools/expat: update to 2.4.6
Switched to CMake for faster compilation and greater parallel
friendliness.

Added CMake options from the packages feed.

This release fixes various CVEs.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
c8fdca4f6f tools/findutils: update to 4.9.0
Add compilation fix for Ubuntu 20.04. Provided by upstream maintainer:

https://github.com/openwrt/packages/issues/17912#issuecomment-1046726426

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
94dd68ff73 tools/zstd: update to 1.5.2
Switched to building with meson as it's faster and does not need a
dependency on cmake, which takes a long time to build.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
2d5f03205a tools/ccache: add cmake dependency
This will be needed for the next commit as ccache's cmake dependency is
satisfied by zstd currenly.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
03f55708cb tools/cmake: update to 3.22.2
Mostly random Python 3.10 fixes.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
63e530a519 tools/mtools: update to 4.0.37
No changelog is available.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Rosen Penev
c8b7065f61 tools/mklibs: update to 0.1.45
Refresh 2to3 patch. Upstream partially did this against some older
python version. This is still needed.

Refreshed other patches to be python3 safe.

Remove uClibc patches as only musl is present now.

Refresh others.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-03-01 00:08:08 +01:00
Stijn Tintel
0dc3566a3b firmware-utils: bump to git HEAD
002cfaf firmware-utils: fix compilation with macOS

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-02-28 13:12:00 +02:00
Stijn Tintel
73dfc9e7d9 firmware-utils: bump to git HEAD
706e9cc tplink-safeloader: support for Archer A6 v3 JP
  497726b firmware-utils: support checksum for AVM fritzbox wasp SOCs
  2ca6462 iptime-crc32: add support for AX8004M
  57d0e31 tplink-safeloader: TP-Link EAP615-Wall v1 support
  8a8da19 tplink-safeloader: add TL-WPA8631P v3 support
  eea4ee7 tplink-safeloader: add TP-Link Archer A9 v6 support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-02-27 12:01:22 +02:00
Rosen Penev
628970a195 tools/meson: update to 0.61.2
Seems to be minor bugfixes with Cygwin and Windows.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-26 13:44:14 +01:00
Rosen Penev
68a20d8631 tools/quilt: update to 0.67
- Call pager with original LANG environment variable
  - Consistently complain early if no series file is found
  - Fix handling of symbolic links by several commands
  - Tighten the patch format parsing
  - Reuse the shell (performance)
  - Document the series file format further
  - Document that quilt loads /etc/quilt.quiltrc
  - configure: Make stat configurable
  - series: Minor optimizations
  - setup: Don't obey the settings of any englobing .pc
  - setup: Default to fast mode
  - quilt.el: Fix documentation of quilt-pc-directory
  - quilt.el: Load /etc/quilt.quiltrc if ~/.quiltrc doesn't exist
  - quilt.el: Fix quilt-editable when QUILT_PATCHES_PREFIX is set

Refresh patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[add changelog]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-25 14:12:39 +01:00
Paul Spooren
1e2549045c tools: use https for bc mirrors
All mirrors offer encrypted downloads, use it.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-02-24 15:36:28 +01:00
Rosen Penev
0d25db7f17 tools/cmake: add MAKE config variable
Makes sure that Ninja from staging_dir is used and nowhere else.

Reported by reproducible builds project. Builds have been failing ever
since tools/cmake started using Ninja.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-11 12:04:09 +01:00
Jo-Philipp Wich
af79853c73 Revert "tools/zstd: update to 1.5.2"
This reverts commit 8de901ccf7.

Apparently this update breaks tools building.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-02-07 09:03:19 +01:00
Rosen Penev
8de901ccf7 tools/zstd: update to 1.5.2
Switched to building with meson as it's faster and does not need a
dependency on cmake, which takes a long time to build.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-07 00:03:27 +01:00
Rosen Penev
fb6cf22866 tools/meson: update to 0.61.1
Changelog:

backend_startup_project
Add a man page backend to refman
extract_objects() supports generated sources
Python 3.6 support will be dropped in the next release
Warning if check kwarg of run_command is missing
meson rewrite can modify extra_files
meson rewrite target <target> info outputs target's extra_files
Visual Studio 2022 backend
Support for CMake <3.14 is now deprecated for CMake subprojects
Added support for sccache
install_symlink function

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-02-03 23:16:00 +01:00
Sungbo Eo
536a8021c3 firmware-utils: bump to git HEAD
0c15cad iptime-naspkg: add image header tool for ipTIME NAS series
872c87c iptime-crc32: add image header tool for new ipTIME models

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-01-29 23:49:39 +09:00
Daniel Golle
ebeb003470
firmware-utils: update to git HEAD of 2022-01-28
6c95945 ptgen: add Chromium OS kernel partition support
 8e7274e cros-vbutil: add Chrome OS vboot kernel-signing utility

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-01-28 13:00:25 +00:00
Felix Fietkau
3869ccbcc8 tools: build bash on macOS and use it for ipkg-build
On macOS, system binaries silently drop the environment variables for injecting
extra shared libraries (used by fakeroot). This is done for security reasons.
Work around this by building bash from source, so that it gets an ad-hoc signature
and does not have these restrictions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-01-27 13:38:48 +01:00
Felix Fietkau
1d4750fd50 tools/coreutils: build chown
On ARM macOS, injecting extra shared libraries does not work for system
binaries. This causes fakeroot to fail for chown calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-01-27 13:38:48 +01:00
Felix Fietkau
53ebacacf9 tools/fakeroot: fix unresolved symbols on arm64 macOS
The $INODE64 symbol variants are not present, since the base system
always uses 64-bit file offsets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-01-27 13:38:48 +01:00
Hauke Mehrtens
f1d4c77766 firmware-utils: update to latest master
d885b49 tplink-safeloader: support Archer C6v3.0 (BR)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-01-16 21:56:51 +01:00
Matthias Schiffer
9e15dea36e
firmware-utils: update to latest master
84dbf8ee49f5 tplink-safeloader: fix Archer A7v5 factory flashing from vendor fw > v1.1.x

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-01-14 23:13:23 +01:00
Josef Schlehofer
4b587f2561 tools/cmake: update to version 3.22.1
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2021-12-31 15:38:56 +01:00
Huangbin Zhan
b6385a3668 tools/mkimage: update to 2021.10
Changelog:

 - upstream now needs OpenSSL in order to be able to sign FITs. See:
commit cb9faa6f98ae ("tools: Use a single target-independent config to enable OpenSSL")

 - removes upstream patches.

Link: cb9faa6f98
Tested-by: Sergey V. Lobanov <sergey@lobanov.in>
Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-12-27 13:51:41 +01:00
Sergey V. Lobanov
8261b85844 tools/mkimage: fix build on MacOS arm64
Fixed -no-pie compilation warning on MacOS
Fixed errors related to using absolute addressing on MacOS arm64

Based on upstream patch from Jessica Clarke and suggestions from Ronny Kotzschmar

Link to original patch and discussion:
3b142045e8

Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
2021-12-06 23:36:35 +01:00
Rosen Penev
75093d1b1d tools/meson: update to 0.60.1
change meson binary to use py extension. Fixes issue with meson's
symbolextractor using the host python instead of the system one.

We intentionally use a .py extension here so that meson launches
additional python scripts with the same build host python interpreter as
itself is running under (and not the host package one once it becomes
available)

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-12-05 18:49:14 +01:00
Sergey V. Lobanov
8fedc17d01 tools/fakeroot: fix build on MacOS arm64
Added patch for MacOS without 32 bit inodes support
(__DARWIN_ONLY_64_BIT_INO_T is true)

This patch based on discussion https://github.com/archmac/bootstrap/issues/4

Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
2021-12-02 14:43:41 +01:00
Rafał Miłecki
51d4e85068 firmware-utils: bump to the latest master
56e8e19 otrx: support TRX from stdin when extracting
a37ccaf otrx: support unsorted partitions offsets
1fa145e otrx: extract shared code opening & parsing TRX format
0fbc135 oseama: support extracting entity to stdout
58c9d5d oseama: allow reading from stdin
4ecefda otrx: allow validating TRX from stdin
cf01e69 otrx: avoid unneeded fseek() when calculating CRC32
fa35379 tplink-safeloader: add EAP225 v1 support
f4d1263 build, cmake: switch OPENSSL_CRYPTO_LIBRARY -> OPENSSL_CRYPTO_LIBRARIES
cd3f6ee build, cmake: add quotes for FW_UTIL variable arguments

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-12-02 09:14:09 +01:00
Rosen Penev
d1c7df9c4b tools/ccache: update to 4.5.1
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-11-26 21:33:09 +01:00
Rosen Penev
a18047de45 tools/cmake: update to 3.22.0
Refreshed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-11-26 21:27:50 +01:00
Felix Fietkau
340c2ed2ef tools/llvm-bpf: move tarball packing to target/llvm-bpf
This ensures that the tarball is regenerated after make clean or after switching
to a different target

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-22 12:00:40 +01:00
Felix Fietkau
203c86f061 tools/llvm-bpf: include host os/arch in tarball name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-21 13:47:18 +01:00
Huangbin Zhan
1126855911 tools/llvm-bpf: make sure llvm-bpf.tar.gz is created
The llvm-bpf-$version.tar.xz might be absent. For example `make clean` executed, CONFIG_TARGET changed.
This commit can only guarantee that the target file can be built when tools/compile is explicitly called rather than $(tools/stamp-compile).

Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
2021-11-21 13:47:18 +01:00
Felix Fietkau
848499c1cf tools: include the value of CONFIG_SDK_LLVM_BPF in the stampfile
tools/llvm-bpf needs to be checked if the value changes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-21 13:47:18 +01:00
Rosen Penev
9211af712f tools/cpio: fix compilation with clang
A define dealing with builtin type is wrong. A gnulib update fixes
this, but that requires a new cpio version.

Refresh other patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-11-20 21:08:25 +01:00
Andre Heider
e37dffbf35 tools/mkimage: pass --static via PKG_CONFIG_EXTRAARGS
Remove the then unnecessary patch doing exactly that individually.

See also 09465d80 "u-boot.mk: always link host libraries static".

Signed-off-by: Andre Heider <a.heider@gmail.com>
2021-11-06 14:22:26 +01:00
Felix Fietkau
10cbce3b52 tools: ensure that BIN_DIR is created early
Fixes llvm-bpf buildbot failure

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-04 19:05:17 +01:00
Felix Fietkau
2a832b3df5 llvm-bpf: support creating a tarball in bin
This can be used for adding the toolchain to an existing tree without having
to build it from scratch.
Enable building the toolchain + tarball by default on buildbot

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-04 16:59:22 +01:00
Felix Fietkau
a7c0d7c06c llvm-bpf: move to staging_dir/host/llvm-bpf
This makes it easier to package it up for the download server

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-04 16:55:04 +01:00
Rosen Penev
03bb3412a2 tools/libressl: update to 3.4.1
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-11-02 10:00:32 -10:00
Felix Fietkau
6738820bf6 build: fix bpf toolchain dependency for qosify
Add hidden symbols to fix defaults with CONFIG_DEVEL unset

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-01 18:41:20 +01:00
Felix Fietkau
5ad663b765 config: add choice for selecting the LLVM toolchain type
This is global for all BPF based packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-11-01 16:38:40 +01:00
Adrian Schmutzler
b4f2e52309 firmware-utils: bump to latest git HEAD
7073760 ramips: add support for TP-Link RE305 v3
86739f2 Add more missing include for byte swap operations

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-30 22:05:25 +02:00
Rosen Penev
3bd31cc4d2 tools/meson: update to 0.60.0
Add cmake support to meson. Otherwise only pkgconfig can be used.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-30 21:17:20 +02:00
Andre Heider
0e411c69a8 tools/pkgconf: add PKG_CONFIG_EXTRAARGS for additional arguments
This can be used my the OpenWrt build system to pass additional
arguments when required.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2021-10-24 18:00:49 +02:00
Rui Salvaterra
dd0ad9b661 tools/isl: update the download URL
isl.gforge.inria.fr has been dead since early this month [1]. Switch to
libisl.sourceforge.io for the time being.

[1] https://groups.google.com/g/isl-development/c/JGaMo2VUu_8

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-21 20:37:20 +01:00
Felix Fietkau
faa6a9a04b tools/llvm-bpf: add llvm+clang build suitable for compiling code to eBPF
Preparation for building packages that ship eBPF code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20 11:35:34 +02:00
Felix Fietkau
48e209e5c5 tools/fakeroot: explicitly pass CPP variable
For some reason, the generated configure script fails to properly set up
the internal preprocessor command variable, causing the host OS check for
Darwin to fail after the last update.
Explicitly setting CPP fixes this issue

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-13 16:48:53 +02:00
Rosen Penev
977bf5e980 tools/ccache: update to 4.4.2
Refreshed patch.

Disable hiredis backend since it seems to default to it now.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-10 13:05:54 -10:00
Rosen Penev
7c0fb87443 tools/meson: fix usage with SDK
The python path cannot be embedded in the meson binary as it changes
with the SDK.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-10 19:39:32 +01:00
Rosen Penev
c2222f74c8 tools/meson: update to 0.59.2
Update install procedure based on upstream feedback. Normally, meson is
to be installed with pip. But as pip is not mandated by the build
system, it cannot be used. Upstream provides a nice script to pack meson
automatically.

Moved src/ to files/. No need to copy to BUILD_DIR.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-07 14:09:40 -10:00
Kevin Darbyshire-Bryant
81ba544f88 firmware-utils: bump to git HEAD
f9ad6b3 Add more missing includes for byte swap operations

Basically stop it exploding on MacOS

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-10-05 21:52:58 +01:00
Rosen Penev
297cb8c147 tools/cmake: update to 3.21.3
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-05 20:59:51 +02:00
Rosen Penev
5266a27359 tools/bison: update to 3.8.2
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-05 20:59:41 +02:00
Petr Štetiar
8cc9a74a3f firmware-utils: update to version 2021-10-05
Includes following changes:

 db65821f006c cmake: fix missing install target
 3a0cfc856991 Add initial GitLab CI support
 8f47adea6f87 Add missing includes for byte swap operations
 fbafae9f8037 Convert to CMake based project

Additionaly moves source code into separate Git project repository and
converts the package build to utilize CMake.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[rmilecki: rebase, update to the latest repo git & rm -r src]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-05 16:20:10 +02:00
Andrew Cameron
ac03e24635 ath79: add support for TP-Link CPE710-v1
TP-Link CPE710-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on the AP152 reference board

Specifications:
- SoC: QCA9563-AL3A MIPS 74kc @ 775MHz, AHB @ 258MHz
- RAM: 128MiB DDR2 @ 650MHz
- Flash: 16MiB SPI NOR Based on the GD25Q128
- Wi-Fi 5Ghz: ath10k chip (802.11ac for up to 867Mbps on 5GHz wireless
  data rate) Based on the QCA9896
- Ethernet: one 1GbE port
- 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal
  reflector
- Power, LAN, WLAN5G Blue LEDs
- 3x Blue LEDs

Flashing instructions:
Flash factory image through stock firmware WEB UI or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 30-40 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[convert to nvmem, fix MAC assignment in 11-ath10k-caldata]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-09-25 19:28:54 +02:00
Felix Fietkau
ea44aebc27 tools/fakeroot: fix build error on macOS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-09-25 09:38:46 +02:00
Alan Luck
2c9a07ed28 ramips: add missing information to dlink headers
Add additional header information required for newer
bootloaders found on DIR-2660-A1 & A2.

Also remove the MTD splitter compatible from the second firmware
partition, as OpenWrt only supports handling of the first one.

Signed-off-by: Alan Luck <luckyhome2008@gmail.com>
[rephrase commit message, remove removal of read-only flags]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-09-24 12:32:28 +02:00
Hauke Mehrtens
96e05e2e36 libtool: Revert "libtool: bump to 2.4.6"
This breaks the package builds using the SDK.
The targets all build fine, but the package builder fails on many
packages. The package builder uses the OpenWrt SDK.

This reverts commit c377d874be.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-09-23 13:39:11 +02:00
Eneas U de Queiroz
c377d874be libtool: bump to 2.4.6
This updates libtool to its current release, from 2015.  Current patches
were renumbered and given a description text.  The fix in
160-passthrough-ssp.patch is no longer needed.

A patch to speed up build was cherry-picked, and another openwrt
specific patch was needed to not use quotes in $(SHELL), to acommodate
our "SHELL=/usr/bin/env bash" usage.

The already present call to ./bootstrap ensures that generated files are
refreshed, so the patches are applied only to their sources.  Also, that
bootstrap call was adjusted to run at the appropriate time when QUILT=1.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
8c863f604d tools/e2fsprogs: update to 1.46.4
Refresh patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
0d983c2a68 tools/autoconf-archive: update to 2021.02.19
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
d23c5ecb19 tools/sstrip: update to 3.2
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
674bda09e2 tools/sparse: update to 0.6.4
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
aae4bf7c62 tools/mtools: update to 4.0.35
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
fc9682ed39 tools/m4: update to 1.4.19
Remove upstreamed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
22c30ed958 tools/fakeroot: update to 1.26
Remove upstreamed patches. Refresh other.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
af1853af60 tools/bison: update to 3.8.1
Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-20 15:21:17 +02:00
Rosen Penev
aa344bcfa8 tools/pkgconf: update to 1.8.0
Switch to compiling with meson for faster and more reliable compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-16 16:31:28 -10:00
Rosen Penev
c4dfdde2ea tools: add meson
meson is a next generation build system designed to have good defaults,
simpler build files, and fast compilation.

It is built upon python and uses ninja for compilation. The latter
provides fast by default (parallel) and problem free compilation.

There are over 40 packages already successfully using meson. The next
commit will convert pkgconf to use meson compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-16 16:31:28 -10:00
Rosen Penev
4b898afdd2 tools/mm-macros: remove
ccaaab1c04 says that this is in the
codebase because of libsigc++, which is not in the codebase anymore.
Neither in base nor in packages. It doesn't seem to be needed by
anything else either. GNOME packages have transitioned to using meson,
which does not use m4 files.

Tested local compile with CONFIG_ALL. No problems seen.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-16 16:27:32 -10:00
Sander Vanheule
46dec9952b firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version
Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1,
downgrades to firmware versions below v3 as not allowed.  Since OpenWrt
uses version 0.0.0 as a default, this causes the factory install to fail
on devices with a recent firmware. This failure is associated by the
following message on the device's serial console:

    EAP235/230-Wall forbid fw reverted from 3.x.x to lower version!

Vendor firmware (v3) also uses build and release numbers to compare
images, so identical version numbers are very unlikely to cause issues.
Bump the firmware version to 3.0.0 to ensure users can install OpenWrt
on their devices.

Reported-by: Colton Conor <colton.conor@gmail.com>
Tested-by: Colton Conor <colton.conor@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-09-13 18:36:15 +02:00
Sander Vanheule
8dba4741b3 firmware-utils: tplink-safeloader: improve soft-version customisation
Some devices using the safeloader firmware format require a minimum or
specific version to be set in the soft-version metadata partition.
Currently only custom text values can be provided, but not all device
firmware support this format.

Modify the device info struct to allow for more well-defined types of
soft-version overwrites, and provide a few macros for easy value
initialisation. Requires all existing values to be updated to match the
new structure.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
[Adapt TL-WA1201-V2 entry too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-09-13 18:36:15 +02:00
Sander Vanheule
df63619eea firmware-utils: tplink-safeloader: use revision field
The structured soft-version partition has a field which contains a
(source) revision number. Factory images used to include this, but
it was accidentaly removed during an earlier refactoring.

Include the source revision number again in the generated soft-version
partition. Additionaly, also show this revision number when printing
image info.

Fixes: 1a211af2cb ("firmware-utils: tplink-safeloader: refactor meta-partition generation")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-09-09 23:36:13 +02:00
Ivan Pavlov
cdc646c032 tools/libtool: update to 2.4.2
Refresh patches.
Remove upstreamed: 001-fix-func_append.patch

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
2021-09-07 21:10:53 +02:00
Rafał Miłecki
2f7a73329f firmware-utils: seama.h: replace LGPL-2.1-or-later boilerplate with SPDX
This was missed because scancode license scanner was confused by a
slightly different than expected license text (96,75% license score).

License text included "file" instead of "library" in the main part of
the licensing info. It also used "The GNU C Library" instead of the
standard "This library" in 2nd and 3rd paragraphs.

The first paragraph clearly mentions LGPL-2.1-or-later and the use of
"file" instead of "library" should not affect licensing.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-09-07 09:37:35 +02:00
Kevin Darbyshire-Bryant
96a7a4738c tools/findutils: fix build on macos
Use same fix as homebrew:

https://github.com/Homebrew/homebrew-core/pull/69761

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-09-06 09:24:23 +01:00
Robert Balas
baacdd53df ath79: add support for TP-Link TL-WA1201 v2
This device is a wireless access point working on the 2.4 GHz and 5 GHz
band, based on Qualcomm/Atheros QCA9563 + QCA9886.

Specification
- 775 MHz CPU
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- QCA9563: 2.4 GHz 3x3
- QCA9886: 5 GHz
- AR8033: 1x 1 Gbs Ethernet
- 4x LED, WPS factory reset and power button
- bare UART on PCB (accessible through testpoints)

Methods for Flashing:
- Apply factory image in OEM firmware web-gui. Wait a minute after the
  progress bar completes and restart the device.
- Sysupgrade on top of existing OpenWRT image
- Solder wires onto UART testpoints and attach a terminal.
  Boot the device and press enter to enter u-boot's menu. Then issue the
  following commands
  1. setenv serverip your-server-ip
     setenv ipaddr your-device-ip
  2. tftp 0x80060000 openwrt-squashfs.bin (Rembember output of size in
    hex, henceforth "sizeinhex")
  3. erase 0x9f030000 +"sizeinhex"
  4. cp.b 0x80060000 0x9f030000 0x"sizeinhex"
  5. reboot

Recover:
- U-boot serial console

Signed-off-by: Robert Balas <balasr@iis.ee.ethz.ch>
[convert to nvmem]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-09-05 23:52:35 +02:00
Rosen Penev
f78ad901e1 tools/libressl: update to 3.3.4
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:28:55 +02:00
Rosen Penev
eef7f9ea37 tools/cmake: update to 3.21.2
Refreshed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:28:43 +02:00
Rosen Penev
f431f2c4b6 tools/bison: update to 3.7.6
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:28:32 +02:00
Rosen Penev
fe1942a87d tools/dosfstools: update to 4.2
Remove upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:28:20 +02:00
Rosen Penev
af8a5d240b tools/findutils: update to 4.8.0
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:28:08 +02:00
Rosen Penev
cb8e5ede19 tools/tar: update to 1.34
Refresh patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:26:48 +02:00
Rosen Penev
c5953d5f30 tools/zstd: update to 1.5.0
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-09-05 21:26:32 +02:00
Matthew Hagan
6f39649555 firmware-utils: mkmerakifw-old: Add le32 support
mkmerakifw-old was created for the z1 which uses the AR9344 SoC with
be32 addressing. The MX64/MX65 devices use the same header style, however
these boards use a BCM NSP SoC with le32 addressing.

Since we may be booting initramfs images with this header, which may be
of any size, within reason, board->imagelen is set to 0. The kernel
image shoule be limited in the image Makefile.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-31 12:39:53 +02:00
Kevin Darbyshire-Bryant
c9faa84b31 firmware-utils: fix build on not Linux
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-08-21 20:16:39 +01:00
Vincent Wiemann
c4a426746f firmware-utils: add support for ZyXEL ZLD firmware
This commit adds a tool for extracting and creating firmware archives for:
- ZyXEL NWA5121-N
- ZyXEL NWA5121-NI
- ZyXEL NWA5123-NI
- ZyXEL NWA5123-AC
- ZyXEL NWA5301
- ZyXEL NWA3560N v2
- ZyXEL WAC6100
- ZyXEL WAC6500

And maybe others...

Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
2021-08-21 15:59:39 +02:00
Rafał Miłecki
5ecd99f7d2 firmware-utils: nand_ecc: replace GPL boilerplate with SPDX
Cc: yajin <yajin@vm-kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-09 16:08:59 +02:00
Rafał Miłecki
0e85dc0e91 firmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX
This was missed because scancode license scanner was confused by
comments about crc32buf().

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-09 16:08:59 +02:00
Rafał Miłecki
cc8bc2168d firmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX
This was missed because scancode license scanner was confused by
comments about crc32buf().

Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-09 16:08:59 +02:00
Rafał Miłecki
f2e86d54c4 firmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX
This was missed because scancode license scanner was confused by a
comment about (no) copyrights in the init_crc_table().

Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-09 16:08:59 +02:00
Rafał Miłecki
fe54c3a0db firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX
This was missed because scancode license scanner was confused by a
comment about Cisco's GPL code github repository.

Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
2021-08-09 16:08:59 +02:00
Rafał Miłecki
2dc1e4b488 firmware-utils: add GPL 2.0 SPDX to files with no license info
These files fall under the project license: GPL-2.0-only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-06 09:50:44 +02:00
Rafał Miłecki
e7ae32b8df firmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Matthias Schiffer <mschiffer@universe-factory.net>
2021-08-06 09:50:44 +02:00
Rafał Miłecki
63bf027cc1 firmware-utils: seama: replace BSD-3-Clause boilerplate with SPDX
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-06 09:50:44 +02:00
Rafał Miłecki
60aa12984a firmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX
This uses "GPL-2.0-or-later" header for files identified using scancode
license scanner with 100% score as GPL 2.0 or later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-08-06 09:50:42 +02:00
Rafał Miłecki
f705008d7e firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX
This uses "GPL-2.0-only" header for files identified using scancode
license scanner with 100% score as GPL 2.0.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-06 09:34:55 +02:00
Roberto Valentini
af56075a8f ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.

This device is nearly identical to RE450 v3

Specification:

- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button
- UART header on PCB[1]

Flash instruction:
Apply factory image in OEM firmware web-gui.

[1] Didn't work, probably need to short unpopulated resistor R64
    and R69 as RE450v3

Signed-off-by: Roberto Valentini <valantin89@gmail.com>
2021-07-11 16:58:12 +02:00
Diogenes Rengo
cce2e8db56 ath79: add support for TP-Link TL-WR941HP v1
Specifications:
    SOC:        Qualcomm Atheros TP9343 (750 MHz)
    Flash:      8 Mb (GigaDevice GD25Q64CSIG)
    RAM:        64 Mb (Zentel A3R12E40DBF-8E)
    Serial:     yes, 4-pin header
    Wlan:       Qualcomm Atheros TP9343, antenna: MIM0 3x3:3 RP-SMA
                3 x 2.4GHz power amp module Skyworks (SiGe) SE2576L
    Ethernet:   Qualcomm Atheros TP9343
    Lan speed:  100M ports: 4
    Lan speed:  100M ports: 1
    Other info: same case, ram and flash that TP-Link TL-WR841HP,
                different SOC

    https://forum.openwrt.org/t/adding-device-support-tp-link-wr941hp/

Label MAC addresses based on vendor firmware:
    LAN   *:ee  label
    WAN   *:ef  label +1
    WLAN  *:ee  label

    The label MAC address found in "config" partition at 0x8

Flash instruction:
    Upload the generated factory firmware on web interface.

Signed-off-by: Diogenes Rengo <rengocbx250@gmail.com>
[remove various whitespace issues, squash commits, use short 0x0]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-07-04 18:07:35 +02:00
Rosen Penev
5cff6c1abb tools/cmake: update to 3.20.3 + build with Ninja
Compile with Ninja. Ninja compiles faster and is more stable with
parallel builds. Routines copied from cmake.mk.

Speed improves from:

Executed in	127.47 secs	fish		external
usr time	17.02 mins	446.00 micros	17.02 mins
sys time	1.18 mins	40.00 micros	1.18 mins

to:

Executed in	118.91 secs	fish		external
usr time	17.28 mins	499.00 micros	17.28 mins
sys time	1.13 mins	45.00 micros	1.13 mins

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-20 20:12:14 -10:00
Rosen Penev
3cbdc13bc1 tools/squashfskit4: fix compilation under big endian
The macro used is for the wrong struct. Just byte swap manually.

Refreshed patches.

Tested on sparc64.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-20 18:59:36 -10:00
Rosen Penev
b154a2f8d3 tools/e2fsprogs: update to 1.46.2
Fix wrong FPIC flag to fix compilation under sparc64

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-20 18:10:15 -10:00
Rosen Penev
bf4dbbb55e tools/libressl: update to 3.3.3
Fix wrong FPIC variable usage. Fixes compilation under sparc64 host.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-20 15:20:54 -10:00
Rosen Penev
2e745e9be6 treewide: remove BUILD_PARALLEL from CMake packages
It's already default. The only exception is mt76 which has Ninja
disabled.

Found with:

git grep BUILD_PARALLEL | cut -d ':' -f 1 | sort -u > par
git grep cmake.mk | cut -d ':' -f 1 > cmake
comm -1 -2 par cmake

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-19 20:44:59 -10:00
Stijn Segers
b6245fbd58 firmware-utils: tplink-safeloader: support Archer A6 v3 CA
The Canadian edition of the TP-Link Archer A6 v3 uses a different header, but
otherwise it's identical to the already supported EU/US editions.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Brian Lee <dev@leebrian.me>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2021-06-20 00:49:06 +02:00
Rosen Penev
90338370d1 tools/ccache: update to 4.3
Remove BUILD_PARALLEL as it's default now.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-19 08:42:50 -10:00
Amish Vishwakarma
d22fb7f4fd ramips: add support for TP-Link Archer C6 v3
The patch adds support for the TP-Link Archer C6 v3 (FCC ID TE7A6V3)
The patch adds identification changes to the existing TP-Link Archer A6,
by Vinay Patil <post2vinay@gmail.com>, which has identical hardware.

Specification
-------------
MediaTek MT7621 SOC
RAM:         128MB DDR3
SPI Flash:   W25Q128 (16MB)
Ethernet:    MT7530 5x 1000Base-T
WiFi 5GHz:   Mediatek MT7613BE
WiFi 2.4GHz: Mediatek MT7603E
UART/Serial: 115200 8n1

Device Configuration & Serial Port Pins
---------------------------------------
ETH Ports:    LAN4 LAN3 LAN2 LAN1 WAN
             _______________________
             |                     |
Serial Pins: |   VCC GND TXD RXD   |
             |_____________________|

LEDs:         Power Wifi2G Wifi5G LAN WAN

Build Output
------------
The build will generate following set of files
[1] openwrt-ramips-mt7621-tplink_archer-c6-v3-initramfs-kernel.bin
[2] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin
[3] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-sysupgrade.bin

How to Use - Flashing from TP-Link Web Interface
------------------------------------------------
* Go to "Advanced/System Tools/Firmware Update".
* Click "Browse" and upload the OpenWrt factory image: factory.bin[2]
* Click the "Upgrade" button, and select "Yes" when prompted.

TFTP Booting
------------
Setup a TFTP boot server with address 192.168.0.5.
While starting U-boot press '4' key to stop autoboot.
Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin
From u-boot command prompt run tftpboot followed by bootm.

Recovery
--------
Archer A6 V3 has recovery page activated if SPI booting from flash fails.
Recovery page can be activated by powercycling the router four times
before the boot process is complete.
Note: TFTP boot can be activated only from u-boot serial console.
Device recovery address: 192.168.0.1

Signed-off-by: Amish Vishwakarma <vishwakarma.amish@gmail.com>
[fix indent]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-13 11:32:31 +02:00
Felix Fietkau
fa0aea53b2 tools: build ninja before ccache to fix the build order
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-12 14:33:57 +02:00
Felix Fietkau
d45baa860f tools: fix dependencies of cmake packages
Make cmake depend on ninja, so that other cmake based tools also depend on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-12 12:40:27 +02:00
Felix Fietkau
97258f5363 build: add ninja build tool and make it available for cmake
ninja is faster at building cmake packages than make, and according to reports
also more reliable at handling parallel builds
This commit includes a patch that adds GNU make jobserver support, in order to
allow more precise control over the number of parallel tasks

Enable parallel build by default for packages using ninja

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-12 10:46:39 +02:00
Rui Salvaterra
609aa39783 tools/isl: bump to 0.24
Tested with Graphite and -floop-nest-optimize, without issues.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-06-06 00:26:13 +02:00
Michael Pratt
7b9a0c264c ath79: use dynamic partitioning for TP-Link CPE series
CPExxx and WBSxxx boards with AR9344 SOC
use the OKLI lzma kernel loader
with the offset of 3 blocks of length 4k (0x3000)
in order to have a fake "kernel" that cannot grow larger
than how it is defined in the now static OEM partition table.

Before recent changes to the mtdsplit driver,
the uImage parser for OKLI only supported images
that started exactly on an eraseblock boundary.

The mtdsplit parser for uImage now supports identifying images
with any magic number value
and at any offset from the eraseblock boundary
using DTS properties to define those values.

So, it is no longer necessary to use fixed sizes
for kernel and rootfs

Tested-by: Andrew Cameron <apcameron@softhome.net>  [CPE510 v2]
Tested-by: Bernhard Geier <freifunk@geierb.de>      [WBS210 v2]
Tested-by: Petrov <d7c48mWsPKx67w2@gmail.com>       [CPE210 v1]
Signed-off-by: Michael Pratt <mcpratt@pm.me>
2021-06-05 23:39:14 +02:00
Georgi Vlaev
a46ad596a3 ramips: add support for TP-Link Archer C6U v1 (EU)
This patch adds support for TP-Link Archer C6U v1 (EU).
The device is also known in some market as Archer C6 v3.
This patch supports only Archer C6U v1 (EU).

Specifications:
--------------

* SoC: Mediatek MT7621AT 2C2T, 880MHz
* RAM: 128MB DDR3
* Flash: 16MB SPI NOR flash (Winbond 25Q128)
* WiFi 5GHz: Mediatek MT7613BEN (2x2:2)
* WiFi 2.4GHz: Mediatek MT7603EN (2x2:2)
* Ethernet: MT7630, 5x 1000Base-T.
* LED: Power, WAN, LAN, WiFi 2GHz and 5GHz, USB
* Buttons: Reset, WPS.
* UART: Serial console (115200 8n1), J1(GND:3)
* USB: One USB2 port.

Installation:
------------

Install the OpenWrt factory image for C6U is from the
TP-Link web interface.

1) Go to "Advanced/System Tools/Firmware Update".
2) Click "Browse" and upload the OpenWrt factory image:
openwrt-ramips-mt7621-tplink_archer-c6u-v1-squashfs-factory.bin.
3) Click the "Upgrade" button, and select "Yes" when prompted.

Recovery to stock firmware:
--------------------------

The C6U bootloader has a failsafe mode that provides a web
interface (running at 192.168.0.1) for reverting back to the
stock TP-Link firmware. The failsafe interface is triggered
from the serial console or on failed kernel boot. Unfortunately,
there's no key combination that enables the failsafe mode. This
gives us two options for recovery:

1) Recover using the serial console (J1 header).
The recovery interface can be selected by hitting 'x' when
prompted on boot.

2) Trigger the bootloader failsafe mode.
A more dangerous option is force the bootloader into
recovery mode by erasing the OpenWrt partition from the
OpenWrt's shell - e.g "mtd erase firmware". Please be
careful, since erasing the wrong partition can brick
your device.

MAC addresses:
-------------

OEM firmware configuration:
D8:07:B6:xx:xx:83 : 5G
D8:07:B6:xx:xx:84 : LAN (label)
D8:07:B6:xx:xx:84 : 2.4G
D8:07:B6:xx:xx:85 : WAN

Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
2021-05-26 23:10:25 +02:00
Vinay Patil
f8f8935adb ramips: add support for TP-Link Archer A6 v3
The patch adds support for the TP-Link Archer A6 v3
The router is sold in US and India with FCC ID TE7A6V3

Specification
-------------
MediaTek MT7621 SOC
RAM:         128MB DDR3
SPI Flash:   W25Q128 (16MB)
Ethernet:    MT7530 5x 1000Base-T
WiFi 5GHz:   Mediatek MT7613BE
WiFi 2.4GHz: Mediatek MT7603E
UART/Serial: 115200 8n1

Device Configuration & Serial Port Pins
---------------------------------------
ETH Ports:    LAN4 LAN3 LAN2 LAN1 WAN
             _______________________
             |                     |
Serial Pins: |   VCC GND TXD RXD   |
             |_____________________|

LEDs:         Power Wifi2G Wifi5G LAN WAN

Build Output
------------
The build will generate following set of files
[1] openwrt-ramips-mt7621-tplink_archer-a6-v3-initramfs-kernel.bin
[2] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-factory.bin
[3] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-sysupgrade.bin

How to Use - Flashing from TP-Link Web Interface
------------------------------------------------
* Go to "Advanced/System Tools/Firmware Update".
* Click "Browse" and upload the OpenWrt factory image: factory.bin[2]
* Click the "Upgrade" button, and select "Yes" when prompted.

TFTP Booting
------------
Setup a TFTP boot server with address 192.168.0.5.
While starting U-boot press '4' key to stop autoboot.
Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin
From u-boot command prompt run tftpboot followed by bootm.

Recovery
--------
Archer A6 V3 has recovery page activated if SPI booting from flash fails.
Recovery page can be activated from serial console only.
Press 'x' while u-boot is starting
Note: TFTP boot can be activated only from u-boot serial console.
Device recovery address: 192.168.0.1

Thanks to: Frankis for Randmon MAC address fix.

Signed-off-by: Vinay Patil <post2vinay@gmail.com>
[remove superfluous factory image definition, whitespacing]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-05-26 23:10:14 +02:00
David Adair
2d15468323 ccache: Build with ENABLE_DOCUMENTATION=OFF
This adjusts the Makefile to use the new option to turn off the
doc builds. It will not cause any problems except a warning
about unused options if combined with a ccache source missing
the upstream patch.

Since a config setting is required to re-enable the doc build this
is equivalent to unconditionally disabling the docs if the config
setting is not created.

Signed-off-by: David Adair <djabhead@aol.com>
2021-05-23 15:11:38 +02:00
Ruslan Isaev
7a70f78fb7 fakeroot: Alpine linux libc.musl build error fix
Prevent build error on Alpine Linux host:
libfakeroot.c error: conflicting types for 'id_t'
Error relocating openwrt/staging_dir/host/lib/libfakeroot.so: SEND_GET_XATTR: symbol not found

Signed-off-by: Ruslan Isaev <legale.legale@gmail.com>
2021-05-23 15:11:19 +02:00
Kevin Darbyshire-Bryant
baf2a50ef3 firmware-utils: fix coverity zytrx.c resource leak
fix coverity resource leak warning:

    	*len = stat.st_size;
    	mapped = mmap(NULL, stat.st_size, PROT_READ, MAP_SHARED, fd, 0);
    	if (close(fd) < 0)
CID 1484880:  Resource leaks  (RESOURCE_LEAK)
Variable "mapped" going out of scope leaks the storage it points to.
    		return NULL;
    	return mapped;
    }

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-05-20 11:56:38 +01:00
Bjørn Mork
48cad07a55 firmware-utils: zytrx: Add util for ZyXEL specific header
The ZyXEL NR7101 prepend an additional header to U-Boot images. This
header use the TRX magic 0x30524448 (HDR0), but is incompatible with
TRX images.

This code is reverse-engineered based on matching 32 bit numbers
found in the header with lengths and different checksum
calculations of the vendor images found on the device.  The result
was matched against the validation output produced by the
bootloader to name the associated header fields.

Example bootloader validation output:

 Zyxel TRX Image 1 --> Found!  Header Checksum OK
 ============ZyXEL header information==================
         chipId             : MT7621A
         boardId            : NR7101
         modelId            : 07 01 00 01
         kernel_len         : (14177560)
         kernelChksum       : (0x8DD31F69)
         swVersionInt       : 1.00(ABUV.0)D1
         swVersionExt       : 1.00(ABUV.0)D1

 Zyxel TRX Image 2 --> Found!  Header Checksum OK
 ============ZyXEL header information==================
         chipId             : MT7621A
         boardId            : NR7101
         modelId            : 07 01 00 01
         kernel_len         : (14176660)
         kernelChksum       : (0x951A7637)
         swVersionInt       : 1.00(ABUV.0)D0
         swVersionExt       : 1.00(ABUV.0)D0

 =================================================
 Check image validation:
 Image1 Header Magic Number --> OK
 Image2 Header Magic Number --> OK
 Image1 Header Checksum --> OK
 Image2 Header Checksum --> OK
 Image1 Data Checksum --> OK
 Image2 Data Checksum --> OK
 Image1 Stable Flag --> Stable
 Image1 Try Counter --> 0
 Image1: OK
 Image2: OK

The coverage and algorithm for the kernelChksum field is unknown.
This field is not validated by the bootloader or the OEM firmware
upgrade tool. It is therefore set to a static value for now.

The swVersion fields contain free form string values.  The OEM firmware
use ZyXEL structured version numbers as shown above.  The strings are
not interpreted or validated on boot, so they can be repurposed for
anything we want the bootloader to display to the user.  But the OEM
web GUI fails to flash images with freeform strings.

The purpose of the other strings in the header is not known.  The
values appear to be static.  We assume they are fixed for now, until
we have other examples.  One of these strings is the platform name,
which is taken as an input parameter for support other members of
the device family.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
2021-05-09 09:15:44 +02:00
Alex Henrie
dfef88b6ca tplink-safeloader: fix product_name of TP-Link AD7200
The stock firmware does not accept firmware with "Talon" in the name.

Tested on firmware version 1.0.10 Build 20160902 rel. 57400 which came
preinstalled, as well as latest firmware version 2.0.1 Build 20170103
rel.71053 flashed from
AD7200v1-up-ver2-0-1-P1[20170103-rel71053]_2017-01-04_10.08.28.bin.

Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[added details about vendor firmware]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2021-05-06 09:51:58 +02:00
DENG Qingfang
3ebfd0078d ccache: update to 4.2.1
Update ccache to 4.2.1

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch]
2021-04-23 20:57:33 +02:00
Rafał Miłecki
5eb3508ad2 firmware-utils: tplink-safeloader: support displaying fw info
Add "-i" option for reading & displaying firmware info. First it lists
in-firmware partitions ("fwup-ptn"). Then it checks for human
understandable partitions and prints data found in each of them.

This new feature is meant for development & debug purposes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-14 14:04:04 +02:00
Rafał Miłecki
d4f2c2914a firmware-utils: mkmylofw: fix blocks padding
The old code didn't make sense as it was using "len" variable which was
guaranteed to be always 0. Loop right above broken code is:
while (len > 0) { }

With this recent ALIGN macro fix this resulted in subtracting block size
from 0 and calling write_out_padding() with a negative length.

To calculate amount of bytes needed for padding & alignment it should be
enough to use % 4.

Fixes: a2f6622945 ("firmware-utils: fix few random warnings")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-13 14:00:49 +02:00
Rafał Miłecki
489aa752d7 firmware-utils: zyimage: drop POSIX SOURCE defines
This fixes:
src/zyimage.c:10:0: warning: "_POSIX_SOURCE" redefined
src/zyimage.c:11:0: warning: "_POSIX_C_SOURCE" redefined

This change has been tested on Linux with -Wextra and on Mac OS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-13 13:18:17 +02:00
Petr Štetiar
e6d66375cb tplink-safeloader: fix C7v5 factory flashing from vendor fw > v1.1.x
Currently it's not possible to flash factory images on devices shipped
with vendor firmware versions 1.1.0 Build 20201120 rel. 50406 (published
2020-12-22):

 (curFw_ver, newFw_ver) == (1.1, 1.0) [NM_Error](nm_checkSoftVer) 00848: Firmwave not supports, check failed.
 [NM_Error](nm_checkUpdateContent) 01084: software version dismatched
 [NM_Error](nm_buildUpgradeStruct) 01188: checkUpdateContent failed.

They've even following note in release notes:

 Note: You will be unable to downgrade to the previous firmware version
       after updating this firmware.

This version check in vendor firmware is implemented in
/usr/bin/nvrammanager binary likely as following C code[1]:

 sscanf(buf, "%d.%d.%*s",&upd_fw_major, &upd_fw_minor);
 ...
 if (((int)upd_fw_major < (int)cur_fw_major) ||
     ((ret = 1, cur_fw_major == upd_fw_major && (upd_fw_minor < (int)cur_fw_minor)))) {
       ret = 0;
       printf("[NM_Error](%s) %05d: Firmwave not supports, check failed.\r\n\r\n","nm_checkSoftVer" ,0x350);
 }
 ...
 return ret;

So in order to fix this and make it future proof it should be enough to
ship our factory firmware images with major version 7 (lucky number).

Tested on latest firmware version 1.1.2 Build 20210125 rel.37999:

 Firmwave supports, check OK.
  (curFw_ver, newFw_ver) == (1.1, 7.0) check firmware ok!

Flashing back to vendor firmware
c7v5_us-up-ver1-1-2-P1[20210125-rel37999]_2021-01-25_10.33.55.bin works
as well:

 U-Boot 1.1.4-gbec22107-dirty (Nov 18 2020 - 18:19:12)
 ...
 Firmware downloaded... filesize = 0xeeae77 fileaddr = 0x80060000.
 Firmware Recovery file length : 15642231
 Firmware process id 2.
 handle_fw_cloud 146
 Image verify OK!
 Firmware file Verify ok!
 product-info:product_name:Archer C7
 product_ver:5.0.0
 special_id:55530000
 [Error]sysmgr_cfg_checkSupportList(): 1023 @ specialId 45550000 NOT Match.
 Firmware supports, check OK.
 Firmware Recovery check ok!

1. https://gist.github.com/ynezz/2e0583647d863386a66c3d231541b6d1

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2021-04-13 10:29:25 +02:00
Rafał Miłecki
1a55a2b112 firmware-utils: add -Wall to most tools
This helps spotting possible problems

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 11:05:57 +02:00
Rafał Miłecki
69e9138080 firmware-utils: fix -Wpointer-sign warnings
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 11:05:54 +02:00
Rafał Miłecki
052a30d65e firmware-utils: fix -Wmaybe-uninitialized warnings
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 10:46:15 +02:00
Rafał Miłecki
a2f6622945 firmware-utils: fix few random warnings
1. -Wunused-label
2. -Wparentheses
3. -Wmisleading-indentation
4. -Wformat-overflow

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 10:46:15 +02:00
Rafał Miłecki
7c01e2bac1 firmware-utils: fix unused variable warnings
This fixes warnings from the:
1. -Wunused-variable
2. -Wunused-but-set-variable

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 10:46:15 +02:00
Rafał Miłecki
e65b633a5b firmware-utils: fix all -Wformat warnings
1. Use %hhu for uint8_t
2. Use %z for size_t

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-09 10:46:15 +02:00
Rafał Miłecki
9b4fc4cae9 firmware-utils: bcm4908img: convert into a package
bcm4908img is a tool managing BCM4908 platform images. It's used for
creating them as well as checking, modifying and extracting data from.

It's required by both: host (for building firmware images) and target
(for sysupgrade purposes). Make it a host/target package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-08 10:50:59 +02:00
Rafał Miłecki
5a2086d230 firmware-utils: bcm4908img: fix uninitialized var usage
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-08 10:50:59 +02:00
Rafał Miłecki
ed7edf88e2 firmware-utils: bcm4908img: extract bootfs without padding
JFFS2 bootfs partition in a BCM4908 image usually includes some padding.
For flashing it individually (writing to designed MTD partition) we want
just JFFS2 data.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-07 08:02:41 +02:00
Rafał Miłecki
dcbde11af1 firmware-utils: bcm4908img: fix extracting cferom
Fix offset to extract proper data when image contains vendor header.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-07 00:22:37 +02:00
Rafał Miłecki
e33957c241 firmware-utils: bcm4908img: support extracting bootfs & rootfs
It's required for upgrading firmware using single partitions instead of
just blindly writing whole image.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-07 00:21:40 +02:00
Rafał Miłecki
5314cab729 firmware-utils: bcm4908img: replace size with offset
It's much easier to operate on BCM4908 image data with absolute offset
of each section stored. It doesn't require summing sizes over and over.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-07 00:12:01 +02:00
Rafał Miłecki
ed847ef5f3 firmware-utils: bcm4908img: add bootfs support
This adds support for accessing bootfs JFFS2 partition in the BCM4908
image. Support includes:
1. Listing files
2. Renaming file (requires unchanged name length)

Above commands are useful for flashing BCM4908 images which by defualt
come with cferom.000 file and require renaming it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 10:13:05 +02:00
Rafał Miłecki
9c039d56a1 firmware-utils: bcm4908img: support extracting image data
It's useful for upgrading cferom, firmware, etc.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 10:05:25 +02:00
Rafał Miłecki
6af45b842b firmware-utils: bcm4908img: find cferom size
It's important for modifying / extracting firmware content. cferom is
optional image content at the file beginning.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 10:05:09 +02:00
Rafał Miłecki
9b9184f178 firmware-utils: bcm4908img: use "info" command displaying file info
BCM4908 image format contains some info that may be useful for info /
debugging purposes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 10:03:59 +02:00
Rafał Miłecki
d533b27bc0 firmware-utils: bcm4908img: support reading from stdin
1. Don't allow pipe stdin as we need to fseek()
2. Don't alow TTY as it doesn't make sense for binary input

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 09:54:10 +02:00
Rafał Miłecki
a39f85d8b6 firmware-utils: bcm4908img: detect Netgear vendor firmware
Netgear uses CHK header which needs to be skipped when validating
BCM4908 image. Detect it directly in the bcm4908img tool. Dealing with
binary structs and endianess is way simpler in C.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 09:54:10 +02:00
Rafał Miłecki
7d5f743942 firmware-utils: bcm4908img: extract parsing code
Move code parsing existing firmware file to separated function. This
cleans up existing code and allows reusing parsing code for other
commands.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-05 09:54:10 +02:00
Rafał Miłecki
a3611432a6 firmware-utils: bcm4908kernel: name struct fields
Less magic names / values.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-24 22:45:00 +01:00
Rafał Miłecki
1ff7569387 firmware-utils: bcm4908img: name fields & values
Less magic numbers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-03-24 17:30:26 +01:00
Tony Ambardar
cbc37d60cb tools/sparse: update to version 0.6.3
Update to the latest stable release.

This fixes a segfault and build failure seen compiling the 5.10 kernel
for x86/64. With this update, builds complete and sparse generates the
usual large volume of warnings as on 5.4 kernels.

Reported-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 00:59:22 +01:00
Hauke Mehrtens
4d9f69322c tools: otrx: allow own magic
This allows to specify an own magic instead of using the default magic
value TRX_MAGIC. If no own magic is specified the default one will be
used.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 16:57:34 +01:00
Daniel Golle
00a326a736
firmware-utils/ptgen: remove unused variable assignment
Discovered by coverty:

 CID 1473630:  Code maintainability issues  (UNUSED_VALUE)

 Assigning value from "type_to_guid_and_name(type, &name)" to
 "part_guid" here, but that stored value is overwritten before it can
 be used.

Remove the now redundant assignment of part_guid which is also set
conditionally later on.

Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 21:59:58 +00:00
Tony Ambardar
bf4aa0c6a2 tools/libelf: remove unneeded host library
This old ELF library dating to 2009 used to be necessary on MacOS but
is not required for building the kernel or tools since [1]. On Linux
systems, libelf is already an OpenWRT build-system prerequisite [2].

Presence of the older library can mask or conflict with the system libelf
and lead to build errors, as seen compiling Linux kernels since v5.8 or
host tools such as dwarves (e.g. pahole).

Remove the unnecessary tools/libelf library and avoid the related issues.

[1] 5f8e587240 ("build: force disable stack validation during kernel build
                 on non-linux systems")
[2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites

Tested-by: Rosen Penev <rosenp@gmail.com> (Linux)
Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS)
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-13 22:20:02 +00:00
Daniel Golle
ce19e8fa43
tools: mkimage: add patches for 64-bit MediaTek BootROM
Add patches for mkimage to allow using it instead of the binary-only
'bromimage' tool to generate bl2 for MT7622.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-11 16:24:20 +00:00
Oskari Lemmela
87406bbc09 firmware-utils/ptgen: change GPT to LBA addressing
Do not align partitions with sectors. Only kb align
for GPT is supported.

Use 254 heads and 63 sectors for PMBR.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-03-03 01:00:23 +00:00
Oskari Lemmela
460dd2fe28 firmware-utils/ptgen: add support for hybrid MBR
Adding -H option copies partition to MBR after pmbr entry.
Max 3 partitions can be copied to MBR.

Hybrid MBR is needed only in special cases.
For example mt7622 SD card boot needs MBR entry with boot
flag enabled.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-03-03 01:00:23 +00:00
Oskari Lemmela
4a078bd135 firmware-utils/ptgen: fix partition guid and name
guid and name function should be called before storing
partition info.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-03-03 01:00:23 +00:00
Oskari Lemmela
46c411e0b3 firmware-utils/ptgen: fix compile warnings
remove extra arguments from printf message

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-03-03 01:00:23 +00:00
Daniel Golle
c58005a943 tools/xxd: fix source URL
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-01 16:39:17 +00:00
Daniel Golle
2b94aac7a1
tools: xxd: use more convenient source tarball
Don't download all of vim just to build xxd. Use a tight tarball
containing only xxd sources instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-01 14:06:33 +00:00
Daniel Golle
c4dd2441e7
tools: add xxd (from vim)
U-Boot requires xxd to create the default environment from an external
file as done in uboot-mediatek.
Build xxd (only, not the rest of vim) as part of tools to make sure it
is present on the buildhost.

Reported-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-28 19:27:47 +00:00
Daniel Golle
049ac36b2f firmware-utils/ptgen: set GPT partition attributes and name
Allow setting GPT partition names as used by TF-A bl2 to identify the
FIP volume to load from eMMC and SD-card.
While at it, also allow setting 'required' attribute as it should be
used for volumes which are essential for the system to boot.
Also properly handle setting the LEGACY_BOOT flag on the partition
selected as 'active', as this is how it is specified in the spec.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-28 01:23:48 +00:00
David Bauer
ad54e32651 tools: add cpio
mediatek-mt7622 as well as mediatek-mt7623 require CPIO to create their
initramfs images. So build CPIO as part of the host toolchain.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-28 00:09:09 +00:00
David Bauer
9a9cf40dd9 download: add mirror alias for Debian
Add an alias for Debian packages and download them from the Debian
mirror redirector.

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 20:41:00 +01:00
Sander Vanheule
1e75909a35 ramips: mt7621: add TP-Link EAP235-Wall support
The TP-Link EAP235-Wall is a wall-mounted, PoE-powered AC1200 access
point with four gigabit ethernet ports.

When connecting to the device's serial port, it is strongly advised to
use an isolated UART adapter. This prevents linking different power
domains created by the PoE power supply, which may damage your devices.

The device's U-Boot supports saving modified environments with
`saveenv`. However, there is no u-boot-env partition, and saving
modifications will cause the partition table to be overwritten. This is
not an issue for running OpenWrt, but will prevent the vendor FW from
functioning properly.

Device specifications:
* SoC: MT7621DAT
* RAM: 128MiB
* Flash: 16MiB SPI-NOR
* Wireless 2.4GHz (MT7603EN): b/g/n, 2x2
* Wireless 5GHz (MT7613BEN): a/n/ac, 2x2
* Ethernet: 4× GbE
  * Back side: ETH0, PoE PD port
  * Bottom side: ETH1, ETH2, ETH3
* Single white device LED
* LED button, reset button (available for failsafe)
* PoE pass-through on port ETH3 (enabled with GPIO)

Datasheet of the flash chip specifies a maximum frequency of 33MHz, but
that didn't work. 20MHz gives no errors with reading (flash dump) or
writing (sysupgrade).

Device mac addresses:
Stock firmware uses the same MAC address for ethernet (on device label)
and 2.4GHz wireless. The 5GHz wireless address is incremented by one.
This address is stored in the 'info' ('default-mac') partition at an
offset of 8 bytes.
From OEM ifconfig:
    eth     a4:2b:b0:...:88
    ra0     a4:2b:b0:...:88
    rai0    a4:2b:b0:...:89

Flashing instructions:
* Enable SSH in the web interface, and SSH into the target device
* run `cliclientd stopcs`, this should return "success"
* upload the factory image via the web interface

Debricking:
U-boot can be interrupted during boot, serial console is 57600 baud, 8n1
This allows installing a sysupgrade image, or fixing the device in
another way.
* Access serial header from the side of the board, close to ETH3,
  pin-out is (1:TX, 2:RX, 3:GND, 4:3.3V), with pin 1 closest to ETH3.
* Interrupt bootloader by holding '4' during boot, which drops the
  bootloader into its shell
* Change default 'serverip' and 'ipaddr' variables (optional)
* Download initramfs with `tftpboot`, and boot image with `bootm`
    # tftpboot 84000000 openwrt-initramfs.bin
    # bootm

Revert to stock:
Using the tplink-safeloader utility from the firmware-utils package,
TP-Link's firmware image can be converted to an OpenWrt-compatible
sysupgrade image:
  $ ./staging_dir/host/bin/tplink-safeloader -B EAP235-WALL-V1 \
      -z EAP235-WALLv1_XXX_up_signed.bin -o eap235-sysupgrade.bin

This can then be flashed using the OpenWrt sysupgrade interface. The
image will appear to be incompatible and must be force flashed, without
keeping the current configuration.

Known issues:
- DFS support is incomplete (known issue with MT7613)
- MT7613 radio may stop responding when idling, reboot required.
  This was an issue with the ddc75ff704 version of mt76, but appears to
  have improved/disappeared with bc3963764d.
  Error notice example:
  [ 7099.554067] mt7615e 0000:02:00.0: Message 73 (seq 1) timeout

Hardware was kindly provided for porting by Stijn Segers.

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-02-19 14:00:08 +01:00
Felix Fietkau
1da945b760 tools/fakeroot: fix build regression on macOS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-15 19:58:54 +01:00
Ilya Lipnitskiy
43dc26af63 fakeroot: fix to work with glibc 2.33
The following commit removed _STAT_VER definitions from glibc:
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8ed005daf0ab03e142500324a34087ce179ae78e

That subsequently broke fakeroot:
https://bugs.archlinux.org/task/69572
https://bugzilla.redhat.com/show_bug.cgi?id=1889862#c13
https://forum.openwrt.org/t/unable-to-build-toolchain-fakeroot-fails-perhaps-others-after-it/87966

Make the patch based on Jan Pazdziora's suggestion from here:
https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/message/SMQ3RYXEYTVZH6PLQMKNB3NM4XLPMNZO/

Add wrappers for newly exported symbols in glibc.

Apply patch from Debian to fix warnings in fts_read and fts_children:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=676428
https://sources.debian.org/patches/fakeroot/1.25.3-1.1/eglibc-fts-without-LFS/

Fix __xmknod{,at} dev pointer argument. Switch default to assume * and
not the absence of *. On glibc 2.33+, there is no definition for these
functions in header files, so the compile test doesn't work. But, we
can default to using the pointer (as is the case with newer glibc), and
use the header file on older platforms to fail the test and use no pointer.

Tested on my x86_64 Arch Linux machine, fakeroot unit tests pass.
Also tested by building various .ipks and examining the tar contents, to
ensure that the owner uid/gid was 0/0.

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-02-15 07:39:43 +01:00
Ilya Lipnitskiy
0052daae60 tools/patchelf: bump to use latest master
Recent ABI_VERSION commits make use of patchelf. It was discovered that
with patchelf 0.10(and even 0.12) various big endian targets fail to
link against libubox SO that was processed through patchelf. Using
latest master patchelf fixes those link errors.

Potential commits affecting big-endian processing
884eccc4f0
d148bae6c1

Recent builds with failures:
http://buildbot.openwrt.org/master/images/builders/lantiq%2Fxrx200/builds/682
http://buildbot.openwrt.org/master/images/builders/ath79%2Fmikrotik/builds/449

Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-02-15 07:12:51 +01:00
Hauke Mehrtens
e6ccb40ba5 tools: mkimage: Update U-Boot to version 2021.01
* The fit image is now created with 0666 permission in upstream U-Boot
  remove our patch switch creates it with 0744
* The generated/autoconf.h file is created now as an empty file, it is
  not needed to remove this include any more.
* Upstream lib/rsa/rsa-sign.c now includes stdlib.h instead of malloc.h
* ALIGN_MASK was moved to imagetool.h, own patch should not be needed
  any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-02-08 22:46:27 +01:00
Paul Spooren
8286f3a3d3 treewide: unify OpenWrt hosted source via @OPENWRT
Multiple sources are hosted on OpenWrts source server only. The source
URLs to point to the server vary based on different epochs in OpenWrts
history.

Replace all by @OPENWRT which is an "empty" mirror, therefore using the
fallback servers sources.cdn.openwrt.org and sources.openwrt.org.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-02-05 12:00:24 -10:00
Alexey Kunitskiy
8d4afab0ab tplink-safeloader: add support for TP-Link Archer A7 v5 (RU)
Although provided in separate zip archives, the firmwares for EU
and RU version are byte-identical. This adds the missing ID compared
to the support-list in the vendor firmware.

Note (since I checked it anyway):

Partitions and support list are unchanged for all three existing
firmware versions:

  * 20200721-rel40773
  * 20201029-rel43238
  * 20201120-rel50399

Signed-off-by: Alexey Kunitskiy <alexey.kv@gmail.com>
[rewrite commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-05 21:57:20 +01:00
Rosen Penev
ec0c6c1143 tools/zstd: compile with cmake
It's faster and more reliable.

Removed ccache cmake build dependency as it's now implicit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-01-30 18:14:50 -10:00
Rosen Penev
7534c8a2e1 tools/zstd: update to 1.4.8
Switch to the normal tarball instead of the codeload generated one. The
latter has the potential to change hashes based on changes in the repo.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-01-30 18:14:50 -10:00
Rafał Miłecki
c31f797527 firmware-utils: bcm4908asus: tool inserting Asus tail into BCM4908 image
Asus looks for an extra data at the end of BCM4908 image, right before
the BCM4908 tail. It needs to be properly filled to make Asus accept
firmware image.

This tool constructs such a tail, writes it and updates CRC32 in BCM4908
tail accordingly.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-22 20:10:38 +01:00
Rafał Miłecki
eaca08ab58 firmware-utils: bcm4908img: tool adding BCM4908 image tail
Flashing image with BCM4908 CFE bootloader requires specific firmware
format. It needs 20 extra bytes with magic numbers and CRC32 appended.

This tools allows appending such a tail to the specified image and also
verifying CRC32 of existing BCM4908 image.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-18 07:39:09 +01:00