Commit Graph

66 Commits

Author SHA1 Message Date
John Audia
5d3a6fd970 kernel: bump 5.4 to 5.4.99
Ran update_kernel.sh in a fresh clone without any existing toolchains.
No manual changes needed.

Build system: x86_64
Build-tested: bcm27xx/bcm2711

Signed-off-by: John Audia <graysky@archlinux.us>
2021-02-18 20:04:50 +01:00
Rafał Miłecki
09fbc79bf6 kernel: drop ofpart patch dropped from upstream mtd tree
It stopped ofpart_parser_init() from being called

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-02-15 15:06:40 +01:00
Rafał Miłecki
ac7d45b5e7 kernel: backport "ofpart" mtd parser upstream quirks support
This adds quirks support to the "ofpart" parser. It's required to
support fixed partitions that require some extra logic.

Right now only BCM4908 binding is supported (BCM4908 requires detecting
currently used "firmware" partition).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-02-15 12:02:33 +01:00
John Audia
e95b1b23f1 kernel: bump 5.4 to 5.4.97
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Manually rebased:
 bcm27xx
  950-0267-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch
 bcm53xx
  180-usb-xhci-add-support-for-performing-fake-doorbell.patch
 layerscape
  302-dts-0008-arm64-dts-ls1046a-accumulated-change-to-ls1046a-boar.patch
  820-usb-0016-MLK-16735-usb-host-add-XHCI_CDNS_HOST-flag.patch
  820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch

Build system: x86_64
Build-tested: bcm27xx/bcm2711, ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions/everything functional.

Signed-off-by: John Audia <graysky@archlinux.us>
[remove quilt comment, fix/adjust 820-usb-* layerscape patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-11 16:08:28 +01:00
Rafał Miłecki
7495acb555 kernel: backport mtd commit converting partitions doc syntax
1. It's useful for developing & validating DTS files inside OpenWrt
2. This will allow backporting later changes that depend on it

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-01-20 07:47:23 +01:00
John Audia
3f165fa7cc kernel: bump 5.4 to 5.4.82
Removed since included upstream and could be reverse-applied by quilt:
  backport-5.4/315-v5.10-usbnet-ipeth-fix-connectivity-with-ios-14.patch

Remaining modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [build/run x86_64]
2020-12-09 17:05:40 +01:00
John Audia
2abc55b2e2 kernel: bump 5.4 to 5.4.81
All modifications made by update_kernel.sh/no human intervention needed

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[another refresh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-12-04 16:34:39 +01:00
David Bauer
f64496f30f generic: ipeth: fix iOS 14 tethering
This fixes tethering with devices using iOS 14. Prior to this patch,
connections to remote endpoints were not possible while data transfers
between the OpenWrt device and the iOS endpoints worked fine.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-11-30 09:31:25 +01:00
John Audia
4e39949dd1 kernel: bump 5.4 to 5.4.80
Removed since could be reverse-applied by quilt and found to be
included upstream:
  backport-5.4/789-net-usb-qmi_wwan-Set-DTR-quirk-for-MR400.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/generic
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run]
2020-11-26 11:17:55 +01:00
John Audia
9100566267 kernel: bump 5.4 to 5.4.79
Manually rebased patches:
  ath79/patches-5.4/910-unaligned_access_hacks.patch
  bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
  bcm27xx/patches-5.4/950-0414-SQUASH-Fix-spi-driver-compiler-warnings.patch
  ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch

Removed since could be reverse-applied by quilt and found to be included upstream:
  ipq806x/patches-5.4/096-PCI-qcom-Make-sure-PCIe-is-reset-before-init-for-rev.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[refresh altered targets after rebase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-24 15:36:59 +01:00
Filip Moc
1e69106e34 generic: add DTR quirk patch for MR400 LTE
This is required for LTE module MR400 in TL-MR6400 v4.

Signed-off-by: Filip Moc <lede@moc6.cz>
2020-11-23 00:45:44 +00:00
John Audia
667f6c7f49 kernel: bump 5.4 to 5.4.77
Manually rebased patches:
 bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
 generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch
 layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
 mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch

Removed:
 layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              lantiq/Easybox 904 xDSL, x86_64
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-18 21:13:46 +01:00
John Audia
b4c02c9998 kernel: bump 5.4 to 5.4.73
Removed upstreamed patches:
 generic/pending-5.4
   445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch
   446-mtd-spinand-gigadevice-Add-QE-Bit.patch
 pistachio/patches-5.4
   150-pwm-img-Fix-null-pointer-access-in-probe.patch

Manually rebased:
 layerscape/patches-5.4
   801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch
   801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch
   801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch
   820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
              mvebu (mamba, rango), x86_64, ramips/mt7621
Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-01 14:44:06 +01:00
John Audia
283cdb30ab kernel: bump 5.4 to 5.4.68
All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x, ath79/generic, bcm72xx/bcm2711
Run-tested: ipq806x (R7800)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2020-09-28 16:23:11 +02:00
Felix Fietkau
f0cc5f6c0a ramips/mediatek: improve GRO performance, fix PPE packet parsing
Backport upstream changes to initialize GDM settings and reset PPE
Allow GMAC to recognize the special tag to fix PPE packet parsing
Improve GRO performance by passing PPE L4 hash as skb hash

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-13 11:14:32 +02:00
John Audia
bee76f1bfa kernel: bump 5.4 to 5.4.64
Remove upstreamed patches:
 generic-backport
  701-v5.5-net-core-use-listified-Rx-for-GRO_NORMAL-in-napi_gro.patch

Manually merged:
 mediatek/patches-5.4
  0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch

All other modifications made by update_kernel.sh

Build-tested: ipq806x, lantiq/xrx200, mvebu, x86/64
Run-tested: ipq806x (R7800), mvebu (mamba, rango),
  lantiq/xrx200 (Easybox 904 xDSL), x86/64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[add community build/run tests to commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-12 01:28:50 +02:00
Adrian Schmutzler
14024f6e0f kernel: use proper upstream inclusion version for patch
The patch is only included in kernel 5.5.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-11 18:40:44 +02:00
John Audia
2c2fcbd2e0 kernel: bump 5.4 to 5.4.63
Manually merged:
 hack-5.4
  230-openwrt_lzma_options.patch
 bcm27xx
  950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
 x86
  011-tune_lzma_options.patch

Remove upstreamed patches in collaboration with Ansuel Smith:
 ipq806x
  093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
  093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
  093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch

All other modifications made by update_kernel.sh

Build-tested: bcm27xx/bcm2708, ipq806x, x86/64
Run-tested: ipq806x (R7800), x86/64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[update commit message/tested]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-06 19:55:19 +02:00
Felix Fietkau
ba72ed537c kernel: backport GRO improvements
Improves network performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-06 15:35:57 +02:00
Felix Fietkau
63b6b10670 kernel: backport improved checksum function for ARM64
Improves network performance in some cases when checksum offload is not
available

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-06 15:35:57 +02:00
John Audia
05b8e84362 kernel: bump 5.4 to 5.4.61
Manually merged:
  backport-5.4
     011-kbuild-export-SUBARCH.patch
  layerscape
    701-net-0262-net-dsa-ocelot-add-tagger-for-Ocelot-Felix-switches.patch

All other modifications made by update_kernel.sh

Build-tested: x86/64, lantiq/xrx200, ramips/mt7621
Run-tested: ipq806x (R7800), lantiq/xrx200, x86/64, ramips (RT-AC57U)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[minor commit message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 19:44:47 +02:00
Linus Walleij
8735997686 kernel: backport RTL8366RB patches
These upstream patches makes the RTL8366RB DSA switch work
properly with OpenWrt, the D-Link DIR-685 gets network and
can be used as a router, and the same should be applicable
for any other device that want to enable the RTL8366RB
through Device Tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-24 18:53:59 +02:00
Adrian Schmutzler
36aa27189a kernel: bump 5.4 to 5.4.60
Deleted upstream patches:
  generic:
    041-genirq-affinity-Make-affinity-setting-if-activated-o.patch
  ipq806x:
    093-5-v5.8-ipq806x-PCI-qcom-Define-some-PARF-params-needed-for-ipq8064-SoC.patch
    093-6-v5.8-ipq806x-PCI-qcom-Add-support-for-tx-term-offset-for-rev-2_1_0.patch

Merged manually:
  ipq806x:
    093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch
  layerscape:
    804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch

Build-tested: ath79/generic, ipq806x, layerscape/armv7, layerscape/armv8_64b
Run-tested: ipq806x (R7800)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-24 17:33:58 +02:00
Felix Fietkau
9c5128854e kernel: backport a fix for a regression that broke IRQ affinity on ARM
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-21 20:44:53 +02:00
Adrian Schmutzler
83b1e40561 kernel: bump 5.4 to 5.4.59
Removed since added upstream:
  bcm27xx:
    950-0428-staging-vchiq_arm-Add-a-matching-unregister-call.patch
  lantiq:
    0800-spi-lantiq-ssc-Fix-warning-by-using-WQ_MEM_RECLAI.patch

Manually adjusted patches:
  layerscape:
    801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch

Build-tested: ath79/generic, ramips, lantiq/xrx200, lantiq/xway,
   mvebu/cortexa9, sunxi/a53
Run-tested: ipq806x (R7800), layerscape (LS1012A-FRDM, LS1046A-RDB)

Building on layerscape is only possible with workaround from PR #3179.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [layerscape]
2020-08-20 14:19:39 +02:00
John Audia
da98603597 kernel: bump 5.4 to 5.4.58
This PR is a blend of several kernel bumps authored by ldir taken from his
staging tree w/ some further adjustments made by me and update_kernel.sh

Summary:
Deleted upstreamed patches:
  generic:
    742-v5.5-net-sfp-add-support-for-module-quirks.patch
    743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch
  bcm63xx:
    022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch
    024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch
  mediatek:
    0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch

Deleted patches applied differently upstream:
  generic:
    641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch

Manually merged patches:
  generic:
    395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
  bcm27xx:
    950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch
  layerscape:
    701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch

Build system: x86_64
Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711,
  imx6, mvebu/cortexa9, sunxi/a53
Run-tested: Netgear R7800 (ipq806x)

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu]
Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64]
[do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch,
adjust and refresh patches, adjust commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
2020-08-18 18:14:54 +02:00
Tony Ambardar
2932b4d05e kernel: mips: fix init crash/bootloop on 64-bit systems
The malta subtargets for mips64 and mips64el fail to start the init process
at boot, resulting in a boot loop. The issue was raised and analyzed within
FS#3277. Investigation suggested code near the [vdso] memory area of the
process was long jumping into a region inaccessible to the process, e.g.

 init: - preinit -
 init: Launched preinit instance, pid=522
 do_page_fault(): sending SIGSEGV to init for invalid read access from 0000000000000360
 epc = 0000000000000360 in init[aaab42b000+4000]
 ra  = 000000fffee385e0 in
 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 Rebooting in 1 seconds..

Note the low-memory read access and epc are the same. Upstream kernel 5.6
included a relevant patch and discussion:

  * d3f703c4359f ("mips: vdso: fix 'jalr t9' crash in vdso code")

Disassembly of the failing kernel's vdso.so confirmed presence of the
telltale long jumps, e.g.:

00000000000007c0 <__vdso_clock_getres@@LINUX_2.6>:
 [...]
 7dc:   0320f809        jalr    t9
 [...]

Restore booting mips64/mips64el malta by backporting the above commit:
  * 310-v5.6-mips-vdso-fix-jalr-t9-crash-in-vdso-code.patch

Fixes: 54310a3aa0 ("malta: add kernel 5.4 config")
Fixes: FS#3277
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3277

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2020-08-15 00:04:59 +08:00
Tony Ambardar
a4856dab0d kernel: mips: restore missing MIPS32 cBPF JIT
Kernel v5.1 included an eBPF JIT for MIPS32 kernels, but problems were
discovered [1] and the changes later reverted in kernel v5.5 with commits:

  * f8fffebdea75 ("MIPS: BPF: Disable MIPS32 eBPF JIT")
  * 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT")

Only the first of these was backported to LTS kernel 5.4, leaving cBPF
programs without a JIT and introducing a performance regression for any
such users e.g. libpcap, tcpdump, etc.

Restore cBPF performance by backporting the second commit above:
  * 070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch

[1] https://lore.kernel.org/bpf/20191205182318.2761605-1-paulburton@kernel.org/

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2020-07-31 13:42:14 +01:00
Hauke Mehrtens
68d9cb8214 kernel: Update kernel 5.4 to version 5.4.50
Run tested: ath79, ipq40xx
Build tested: ath79, ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Kevin Darbyshire-Bryant
d59dc14515 kernel: cake: backport upstream tweaks & fixes
From upstream:
b8392808eb3f sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling
3f608f0c4136 sch_cake: fix a few style nits
8c95eca0bb8c sch_cake: don't call diffserv parsing code when it is not needed
9208d2863ac6 sch_cake: don't try to reallocate or unshare skb unconditionally

From netdev not yet accepted:
sch_cake: fix IP protocol handling in the presence of VLAN tags

The VLAN tag handling is actually wider than just cake so upstream are
working out how to fix it generically.  We fix it here just for cake.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 16:09:18 +01:00
Kevin Darbyshire-Bryant
77cd8f64ca kernel: cake: backport unused var patch to 5.4
This was backported to 4.19 and I clearly expected it to land in 5.4 but
it didn't (5.5) so backport it to 5.4 for consistency.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:24 +01:00
Kevin Darbyshire-Bryant
3fda01a51e kernel: cake: renumber backport patches
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:06 +01:00
Petr Štetiar
e44e60b290 kernel: bump 5.4 to 5.4.48
Resolved merge conflict in the following patches:

 layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch
 ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch

Refreshed patches, removed upstreamed patch:

 bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch

Run tested: qemu-x86-64
Build tested: x86/64

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-22 12:51:22 +02:00
Christopher Hill
344e75eb2b ath79: patch upstream Mikrotik rb4xx-spi driver to be device tree aware
Backport upstream patches that make drivers/spi/spi-rb4xx.c device tree
aware, plus a null pointer fix.

Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-06-15 21:16:18 +02:00
Felix Fietkau
2c82862068 kernel: backport upstream DSA GRO support
Should improve performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-10 16:17:12 +02:00
Petr Štetiar
e5aa498acb kernel: bump 5.4 to 5.4.45
Fixes CVE-2020-10757 via upstream commit df4988aa1c96 ("mm: Fix mremap
not considering huge pmd devmap").

Resolved merge conflict in the following patches:

 bcm27xx: 950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch

Refreshed patches, removed upstreamed patch:

 generic: 751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch
 generic: 754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch

Run tested: qemu-x86-64
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-09 16:59:33 +02:00
Kevin Darbyshire-Bryant
7b4877c204 kernel: sch_cake: use skb hash improve wireguard compatibility
While the other fq-based qdiscs take advantage of skb->hash and doesn't
recompute it if it is already set, sch_cake does not.

This was a deliberate choice because sch_cake hashes various parts of the
packet header to support its advanced flow isolation modes. However,
foregoing the use of skb->hash entirely loses a few important benefits:

- When skb->hash is set by hardware, a few CPU cycles can be saved by not
  hashing again in software.

- Tunnel encapsulations will generally preserve the value of skb->hash from
  before the encapsulation, which allows flow-based qdiscs to distinguish
  between flows even though the outer packet header no longer has flow
  information.

It turns out that we can preserve these desirable properties in many cases,
while still supporting the advanced flow isolation properties of sch_cake.
This patch does so by reusing the skb->hash value as the flow_hash part of
the hashing procedure in cake_hash() only in the following conditions:

- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
  set)

AND

- NAT header rewriting is either disabled, or did not change any values
  used for hashing. The latter is important to match local-origin packets
  such as those of a tunnel endpoint.

The immediate motivation for fixing this was the recent patch to WireGuard
to preserve the skb->hash on encapsulation. As such, this is also what I
tested against; with this patch, added latency under load for competing
flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
going through a virtual link shaped to 1Gbps using sch_cake. This matches
the results we saw with a similar setup using sch_fq_codel when testing the
WireGuard patch.

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-05 21:03:26 +01:00
DENG Qingfang
7c47f6601d generic: mt7530: fix roaming from DSA user ports
When a client moves from a DSA user port to a software port in a bridge,
it cannot reach any other clients that connected to the DSA user ports.
That is because SA learning on the CPU port is disabled, so the switch
ignores the client's frames from the CPU port and still thinks it is at
the user port.

Fix it by enabling SA learning on the CPU port.

To prevent the switch from learning from flooding frames from the CPU
port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
and let the switch flood them instead of trapping to the CPU port.
Multicast frames still need to be trapped to the CPU port for snooping,
so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
to disable SA learning.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
dc4ffaa5ab generic: fix DSA VLAN filtering
Currently enabling VLAN filtering blocks all traffic in the bridge
immediately. That is because DSA ignores all VLAN setup when VLAN
filtering is disabled, and when it is enabled, there is no VLAN entry
in the VLAN table, causing all traffic to be blocked.

Add patches to allow VLAN setup even if VLAN filtering is disabled.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
d56d05f01f generic: mt7530: set CPU port to fallback mode
Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
24410595e9 generic: backport mv88e6xxx port mirroring support
Backport port mirroring support for mv88e6xxx

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-03 20:34:15 +02:00
Adrian Schmutzler
807366af38 kernel: drop backported gpio emulated open drain output fix
This patch has been backported to stable kernel 5.4 already.

Remove our local patch explicitly now, as by applying the patch
(or refreshing) the relevant code is actually added a second time.

Refresh remaining patches as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-25 21:10:44 +02:00
Russell King
714199ec34 kernel: backport v5.8 i2c-pxa updates
Add i2c-pxa updates queued for v5.8, which add bus recovery to this
driver; this is needed for the uDPU platform.

Signed-off-by: Russell King <linux@armlinux.org.uk>
2020-05-21 12:55:31 +02:00
Russell King
72a1d5c3ac kernel: backport gpio emulated open drain output fix
Backport the GPIO emulated open drain output fix from v5.5, which is
required for the i2c-pxa backport.

Signed-off-by: Russell King <linux@armlinux.org.uk>
2020-05-21 12:55:31 +02:00
Petr Štetiar
5ea3ea154f kernel: bump 5.4 to 5.4.36
Refreshed patches, removed upstreamed patch:

 generic/hack: 551-loop-Better-discard-support-for-block-devices.patch

Added generic config symbol `ARM64_ERRATUM_1542419` due to Fixes:
f2791551cedb ("arm64: errata: Hide CTR_EL0.DIC on systems affected by
Neoverse-N1 #1542419").

Run tested: qemu-x86-64, apalis, nbg6617
Build tested: x86/64, imx6, ipq40xx, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-30 00:52:04 +02:00
DENG Qingfang
63696bd0fb kernel: backport support for clause 37 1000Base-X auto-negotiation
This patch is needed for clause 37 1000Base-X encoding used in many SFP modules.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: René van Dorst <opensource@vdorst.com>
2020-04-25 23:45:16 +02:00
Petr Štetiar
faf668be35 kernel: bump 5.4 to 5.4.34
Refreshed patches.

Run tested: qemu-x86-64, apalis, a64-olinuxino
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-21 22:16:33 +02:00
Petr Štetiar
0bea89a1d0 kernel: bump 5.4 to 5.4.32
Refreshed patches, removed upstreamed patches:

 generic: 746-stable-net-dsa-mt7530-fix-null-pointer-dereferencing-in-por.patch

Run tested: qemu-x86-64, apalis
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-14 21:58:16 +02:00
Petr Štetiar
b299002877 kernel: bump 5.4 to 5.4.31
Refreshed patches, removed upstreamed patches:

 oxnas:   003-ARM-dts-oxnas-Fix-clear-mask-property.patch
 generic: 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch

Run tested: apu2, qemu-x86-64, apalis
Build tested: sunxi/a53, imx6, x86/64, ipq40xx

Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-09 00:12:46 +02:00
Chuanhong Guo
f0f35fdac1 Revert "generic: 5.4: Add 4B_OPCODES flag to w25q256"
This reverts commit d7f21940bc.

Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID,
but only the latter has proper 4B_OPCODES support.
W25Q256FV has all 4B read instructions but it lacks a 4B page program
instruction, causing the entire flash to be read-only.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-04-05 12:07:47 +08:00