This adds the following changes:
a88f07f71f stdlib: Remove attr_write from mbstows if dst is NULL [BZ: 29265]
4bc889c01c stdlib: Fixup mbstowcs NULL __dst handling. [BZ #29279]
1fcc7bfee2 alpha: Fix generic brk system call emulation in __brk_call (bug 29490)
68507377f2 socket: Check lengths before advancing pointer in CMSG_NXTHDR
536ddc5c02 elf: Call __libc_early_init for reused namespaces (bug 29528)
2a44960cbc Apply asm redirections in stdio.h before first use [BZ #27087]
b41c535f46 Apply asm redirections in wchar.h before first use
2b3d020055 nscd: Fix netlink cache invalidation if epoll is used [BZ #29415]
bc5cb538e5 elf: Run tst-audit-tlsdesc, tst-audit-tlsdesc-dlopen everywhere
2ff6775ad3 elf: Fix hwcaps string size overestimation
f50a6c843a gconv: Use 64-bit interfaces in gconv_parseconfdir (bug 29583)
1a3afdfe31 resolv: Add tst-resolv-byaddr for testing reverse lookup
6a833d798e resolv: Add tst-resolv-aliases
4d2e67d6e5 resolv: Add internal __res_binary_hnok function
bb8adbba4f resolv: Add the __ns_samebinaryname function
c288e032ae resolv: Add internal __ns_name_length_uncompressed function
e7c03f4765 resolv: Add DNS packet parsing helpers geared towards wire format
d9c979abf9 nss_dns: Split getanswer_ptr from getanswer_r
32e5db3768 nss_dns: Rewrite _nss_dns_gethostbyaddr2_r and getanswer_ptr
7267341ec1 nss_dns: Remove remnants of IPv6 address mapping
9abc40d9b5 nss_dns: Rewrite getanswer_r to match getanswer_ptr (bug 12154, bug 29305)
c36e7cca35 nss_dns: In gaih_getanswer_slice, skip strange aliases (bug 12154)
480c820493 resolv: Add new tst-resolv-invalid-cname
2def56a349 nss_dns: Rewrite _nss_dns_gethostbyname4_r using current interfaces
044755e2fa resolv: Fix building tst-resolv-invalid-cname for earlier C standards
a2e259014f Avoid extra load with CAS in __pthread_mutex_lock_full [BZ #28537]
ed8300c054 Avoid extra load with CAS in __pthread_mutex_clocklock_common [BZ #28537]
a6b81f605d Add LLL_MUTEX_READ_LOCK [BZ #28537]
6bcfbee727 Move assignment out of the CAS condition
43760d33d7 nptl: Effectively skip CAS in spinlock loop
04efdcfac4 sysdeps: Add 'get_fast_jitter' interace in fast-jitter.h
ea69248445 nptl: Add backoff mechanism to spinlock loop
95f5089d4a x86: include BMI1 and BMI2 in x86-64-v3 level
414fc856ff x86-64: Require BMI2 for AVX2 str(n)casecmp implementations
e1561d8cf0 x86-64: Require BMI2 for AVX2 strcmp implementation
b9cbb8dd48 x86-64: Require BMI2 for AVX2 strncmp implementation
67e863742d x86-64: Require BMI2 for AVX2 wcs(n)cmp implementations
94b9c1b640 x86-64: Require BMI2 for AVX2 (raw|w)memchr implementations
36d6b9be3d x86-64: Require BMI2 and LZCNT for AVX2 memrchr implementation
e570b865b5 x86-64: Require BMI1/BMI2 for AVX2 strrchr and wcsrchr implementations
e3976287b2 nscd: Drop local address tuple variable [BZ #29607]
c95ef423d7 nss: Implement --no-addrconfig option for getent
16c7ed6e68 nss: Fix tst-nss-files-hosts-long on single-stack hosts (bug 24816)
d5313bcb7e nss: Use shared prefix in IPv4 address in tst-reload1
9f55d2e7c4 elf: Do not completely clear reused namespace in dlmopen (bug 29600)
ca5df79545 linux: Fix generic struct_stat for 64 bit time (BZ# 29657)
f42d871b22 Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 [BZ# 29564]
675ba1f361 mktime: improve heuristic for ca-1986 Indiana DST
6e8044e910 Fix memmove call in vfprintf-internal.c:group_number
291d440206 Allow #pragma GCC in headers in conformtest
86a701a204 regex: copy back from Gnulib
fa5044f1e3 regex: fix buffer read overrun in search [BZ#28470]
06afa5e09f io: Fix ftw internal realloc buffer (BZ #28126)
deea6ab1bc io: Fix use-after-free in ftw [BZ #26779]
d57cdc1b5a Linux: Support __IPC_64 in sysvctl *ctl command arguments (bug 29771)
75b0edb7ef Update NEWS file in the right place
691f70b84a elf: Fix rtld-audit trampoline for aarch64
e3255e7d21 x86: Fix wcsnlen-avx2 page cross length comparison [BZ #29591]
309c4708ac elf: Fix wrong fscanf usage on tst-pldd
42b9d7def8 Allow for unpriviledged nested containers
405b8ae135 elf: Fix wrong fscanf usage on tst-pldd
a1c12fdf3f _Static_assert needs two arguments for compatibility with GCC before 9
a4217408a3 Apply asm redirections in syslog.h before first use [BZ #27087]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The commit was pushed into the branch to early. It does not help fixing
illegal instruction bug on mpc85xx. That's why it should be reverted.
This reverts commit de6c3cca4d.
Signed-off-by: Nick Hainke <vincent@systemli.org>
8d15809 cli: print current HT mode
8f86dd6 cli: use IWINFO_HTMODE_COUNT
f36b72b cli: use IWINFO_KMGMT_NAMES
91be7e0 cli: use IWINFO_CIPHER_NAMES
49b6ec9 cli: fix printing the scan channel width
b1c8873 cli: fix marking the active channel
9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers
e084781 utils: add helper functions to get names by values
d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers
8752977 utils: add and use iwinfo_format_hwmodes()
02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES
1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES
aefd0ef lib: use common IWINFO_CIPHER_NAMES strings
a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES
9f29e79 lib: constify and fixup the string array definitions
fddc015 nl80211: mark frequencies where HE operation in not allowed
6d50a7c nl80211: add support for HE htmodes
4ba5713 nl80211: properly get available bands for the hwmode
91b2ada nl80211: update the kernel header nl80211.h
3f619a5 nl80211: fix frequency/channel conversion for the 6G band
a77d915 nl80211: don't guess if a name is an ifname
c27ce71 devices: add usb device MediaTek MT7921AU
14f864e nl80211: add ability to describe USB devices
a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path
dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions
d638163 fix -Wdangling-else warnings
4aa6c5a fix -Wreturn-type warning
3112726 fix -Wpointer-sign warning
ebd5f84 fix -Wmaybe-uninitialized warning
5469898 fix -Wunused-variable warnings
462b679 fix -Wduplicate-decl-specifier warnings
ccaabb4 fix -Wformat-truncation warnings
50380db enable useful compiler warnings via -Wall
Fixes: https://github.com/openwrt/openwrt/issues/10158
Fixes: https://github.com/openwrt/openwrt/issues/10687
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 4a4d0bf78d)
0496c722f1d7 nl80211: fix issues with renamed wiphy and multiple phy per device
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 735f5f18dd)
46f04f3808e8 devices: add MediaTek MT7986 WiSoC
b3e08c8b5a8f ops: make support for wireless extensions optional
1f695d9c7f82 nl80211: allow phy names that don't start with 'phy'
b7f9f06e1594 nl80211: fix phy/netdev index lookup
4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit c787962e1d)
This symbol is added by the bcm27xx target patches so it should depend
on that target.
Fixes: efd9463dcf ("kernel: add missing symbol for bcm27xx")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit d5dc6cdc53)
When KERNEL_PERF_EVENTS is enabled in OpenWrt, the RPI_AXIPERF symbol is
exposed. Add a build option for it to fix build failures with
KERNEL_PERF_EVENTS enabled.
Fixes: 3564c22e46 ("bcm27xx: disable duplicate sdhost driver")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit efd9463dcf)
Add support for EON EN25QX128A spi nor flash with no flags as it does
support SFDP parsing.
Fixes: #9442
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Szabolcs Hubai <szab.hu@gmail.com> [ramips/mt7621: xiaomi_mi-router-4a-gigabit]
(cherry picked from commit d7876daf65)
The R8712U driver depends on cfg80211. cfg80211 is provided by mac80211
backports, we can not build any in kernel drivers which depend on
cfg80211 which is an out of tree module in OpenWrt.
The cfg80211 dependency was added with kernel 5.9.
We could add rtl8192su to backports and build it from there.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7ebe1dca47)
Allow registration if the SIM is roaming or partner mode, by adding two
new options to the protocol.
Until now, such registration failed because umbim returns exit codes 4 and
5 for such situations.
Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es>
(cherry picked from commit 840ce0a65b)
In my commit da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_*
modules") I missed a few default config options and description entries.
Those should be gone as well.
Fixes: da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_* modules")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(cherry picked from commit 1e028ac51e)
For kernel versions before 5.2, the required IPsec modes have to be
enabled explicitly (they are built-in for newer kernels).
Commit 1556ed155a ("kernel: mode_beet mode_transport mode_tunnel xfram
modules") tried to handle this, but it does not really work.
Since we don't support these kernel versions anymore and the code is
also broken, let's remove it.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[Remove old generic config options too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit da5c45f4d8)
Add package supporting Bluetooth HCI interfaces connected over SDIO.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[pepe2k@gmail.com: dropped rfkill dependency, other minor text fixes]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
(cherry picked from commit fb75476845)
CONFIG_MMC_BLOCK_BOUNCE was removed in kernel v4.13-rc1
c3dccb74be
Signed-off-by: Tomas Lara <tl849670@gmail.com>
(cherry picked from commit 24307b0351)
The MAC-Address setup for the Teltonika RUT230 v1 was swapped for the
LAN / WAN ports. Also the Label-MAC was assigned incorrect, as the WiFi
MAC is printed on the case as part of the SSID, however only the LAN
MAC-Address is designated as a MAC-Address.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4c0919839d)
Wavlink WS-WN572HP3 4G is an 802.11ac
dual-band outdoor router with LTE support.
Specifications;
* Soc: MT7621DAT
* RAM: 128MiB
* Flash: NOR 16MiB GD-25Q128ESIG3
* Wi-Fi:
* MT7613BEN: 5GHz
* MT7603EN: 2.4GHz
* Ethernet: 2x 1GbE
* USB: None - only used internally
* LTE Modem: Quectel EC200T-EU
* UART: 115200 baud
* LEDs:
* 7 blue at the front
* 1 Power
* 2 LAN / WAN
* 1 Status
* 3 RSSI (annotated 4G)
* 1 green at the bottom (4G LED)
* Buttons: 1 reset button
Installation:
* press and hold the reset button while powering on the device
* keep it pressed for ten seconds
* connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
least Firefox 106.0.3 does not)
* upload the sysupgrade image, confirm the checksum, wait 2 minutes
until the device reboots
Revert to stock firmware:
* same as installation but use the recovery image for WL-WN572HP3
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
(cherry picked from commit dce66899bf)
add three missing LEDs
- PoE-Max
- Link/Act
- PoE
add two missing buttons
- mode
- reset
The last was dropped in
commit 61a3d0075b ("realtek: update GPIO bindings in the dts files in dts-5.10")
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
(cherry picked from commit dbc93d280c)
9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier
2ce1d48 ci: fix building with i.MX6 SDK
584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds
aa8c48e cmake: add a possibility to set library version
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 69f0c29b8b)
We don't need to checkout feed and install feeds for kernel tests. This
saves up to 2 minutes for each target kernel build test.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 925e2a155e)
On cache hit, skip sdk adapt to external toolchain. This is needed because we
cache the already extracted sdk and that is already adapted to be used
as external toolchain.
Rerunning the adap step will result in the test to fail for missing file
as the file are already got wrapped to the external toolchain format.
Fixes: 42f0ab028e ("CI: build: fix use of sdk as toolchain")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 99eaedfe39)
The toolchain included in a sdk have a different format than an external
toolchain tar.
Since sdk is a more integrated setup doesn't use and include wrapper bin
that use the external toolchain config and use an alternative and more
standard way to include all the toolchain headers.
External toolchain use wrapper.sh to append the configured include
header when each tool is called.
Fix the sdk toolchain by reverting their own sdk wrapper scripts and to
simulate an external toolchain build copying what is done in the
toolchain target makefile.
This handle compilation error and warning caused by not using fortify
header on building packages.
Fixes: 006e52545d ("CI: build: add support to fallback to sdk for external toolchain")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 42f0ab028e)
This fixes CVE-2022-1304:
An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5.
This issue leads to a segmentation fault and possibly arbitrary code
execution via a specially crafted filesystem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 60e335b76e)
Refresh the kernel patches for this target. No manual changes.
Fixes: 45ac906c64 ("bcm4908: update DTS files with the latest changes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b97e5ac785)
[ dropped 5.15 change not present in 22.03 ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Accessing the console on many devices is difficult.
netconsole eases debugging on devices that crash
after the network is up.
Reference to the netconsole documentation in upstream Linux:
<https://www.kernel.org/doc/html/latest/networking/netconsole.html>
|
|netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr]
|
| where
| + if present, enable extended console support
| src-port source for UDP packets (defaults to 6665)
| src-ip source IP to use (interface address)
| dev network interface (eth0)
| tgt-port port for logging agent (6666)
| tgt-ip IP address for logging agent
| tgt-macaddr ethernet MAC address for logging agent (broadcast)
OpenWrt specific notes:
OpenWrt's device userspace scripts are attaching the network
interface (i.e. eth0) to a (virtual) bridge (br-lan) device.
This will cause netconsole to report:
|network logging stopped on interface eth0 as it is joining a master device
(and unfortunately the traffic/logs to stop at this point)
As a workaround, the netconsole module can be manually loaded
again after the bridge has been setup with:
insmod netconsole netconsole=@/br-lan,@192.168.1.x/MA:C...
One way of catching errors before the handoff, try to
append the /etc/modules.conf file with the following extra line:
options netconsole netconsole=@/eth0,@192.168.1.x/MA:C...
and install the kmod-netconsole (=y) into the base image.
Signed-off-by: Catalin Toda <catalinii@yahoo.com>
(Added commit message from PR, added links to documentation)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 488b25f5ac)
The isdn4linux drivers and subsystem was removed in kernel 5.3, remove
the kernel package also from OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit db55dea5fc)
The w1_ds2760.ko driver was merged into the ds2760_battery.ko driver.
The driver was removed and this package was never build any more.
This happened with kernel 4.19.
Remove this unused package.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5808973d14)
The rtc-pt7c4338.ko was never upstream under this name, the driver was
removed from OpenWrt some years ago, remove the kmod-rtc-pt7c4338
package too.
Fixes: 74d00a8c38 ("kernel: split patches folder up into backport, pending and hack folders")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5ccf4dcf88)
Several users have reported, that devices using mv88e6176 switch are
seriously broken, basically turning that switch into a hub. Until fixed
those devices should be disabled.
I've used TOH with "Switch 88E6176" filter, which provided me with the
following list of likely affected devices:
* Linksys WRT1200AC v1/v2, WRT1900AC v1/v2
* SolidRun ClearFog Pro
* Turris Omnia
That device list more or less corresponds with the list of devices
mentioned in the linked bug reports.
References: https://github.com/openwrt/openwrt/issues/11077
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Since kernel and packages workflow now use a shared build workflow, they
also need to react on changes on these shared workflow.
Fix this and add these shared workflow to the event paths to check.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 644175c29c)
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: e24a1e6f6d ("CI: build: add support for external toolchains from stable branch")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit e3cf2b84e5)
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: abe8a48242 ("CI: build: add support for per branch tools container")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 65c3d19c4b)
Add support to use sdk as external toolchain if the packaged external
toolchain tar is not found on openwrt servers for build shared workflow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit b59ac2a7d0)
Add support to use external toolchains from stable branch if we are
testing commit targeting stable openwrt branch in kernel and packages
workflow.
With pr the target branch is parsed and the right toolchain is used.
To use the stable toolchain for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit e24a1e6f6d)
Add support in build shared workflow for per branch tools container.
With pr the target branch is parsed and the right container is used.
To use the stable container for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9]- (example openwrt-21.02-fixup)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit abe8a48242)
Add support to push per branch container tools.
For anything not official stick to latest tag that correspond to test
run from master.
If we are testing something for one of the openwrt stable branch, parse
the branch name or the tag and push dedicated tools containers.
To use the stable container for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9] (example openwrt-21.02-fixup)
Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
will refresh the tools container with the matching tag.
(example branch openwrt-22.03 -> tools:openwrt-22.03)
(example branch openwrt-22.03-test -> tools:openwrt-22.03)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 75550771ae)
