Commit Graph

85 Commits

Author SHA1 Message Date
Hauke Mehrtens
47eca7a1ca bcm53xx: add OHCI (USB 1.1) support
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Rafał Miłecki
63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
Rafał Miłecki
75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
Rafał Miłecki
ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
Rafał Miłecki
abed46aacc bcm53xx: enable RT-AC87U UART console
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
Rafał Miłecki
3dd9274332 bcm53xx: add support for SmartRG SR400ac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
Rafał Miłecki
b4ecf19faa bcm53xx: replace DT patches with backports from stblinux
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
Rafał Miłecki
af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
Rafał Miłecki
afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
Rafał Miłecki
610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
Rafał Miłecki
45ec92fa30 bcm53xx: bgmac: add support for the 3rd core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
Rafał Miłecki
3a6cdac37c kernel: backport first bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
Felix Fietkau
c73adc80a3 bcm53xx: add profiling support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
Felix Fietkau
582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63 bcm53xx: add power button for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
Felix Fietkau
f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
Felix Fietkau
f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
Felix Fietkau
147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Felix Fietkau
923bef1678 bcm53xx: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
Felix Fietkau
24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915 bcm53xx: fix GPIO pins > 16
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
Felix Fietkau
1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
Felix Fietkau
d24388da44 bcm53xx: add a comment about the gpio base patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
Felix Fietkau
2dbe131a62 bcm53xx: fix bcma gpio chip base
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45399
2015-04-12 17:22:04 +00:00
Rafał Miłecki
503ccc502d bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45387
2015-04-12 10:20:59 +00:00
Rafał Miłecki
71fcbffc91 bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45352
2015-04-10 09:42:48 +00:00
Rafał Miłecki
4c1ee6f24d bcm53xx: replace few BCM5301X patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45311
2015-04-08 09:22:02 +00:00
Rafał Miłecki
bf828d3fd0 bcm53xx: use bcm47xx_nvram.c with the latest patches
This will be hopefully a mainline version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45204
2015-04-01 07:21:59 +00:00
Felix Fietkau
68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
Rafał Miłecki
fb6164a377 bcm53xx: add SMP support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44939
2015-03-22 15:07:40 +00:00
Rafał Miłecki
e0155ad7b0 bcm53xx: add support for Asus RT-AC68U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44934
2015-03-22 01:57:15 +00:00
Rafał Miłecki
d324dd4ff3 bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44932
2015-03-22 01:57:06 +00:00
Rafał Miłecki
a4523c8e1d bcm53xx: refresh patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44931
2015-03-22 01:56:47 +00:00
Rafał Miłecki
ba10454b91 kernel: backport bgmac patches
This allows dropping some hacky bcm53xx bgmac patch forcing link state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44917
2015-03-21 11:45:50 +00:00
Rafał Miłecki
2b56913734 bcm53xx: fixup early device id 8012
Looks like the BCM53012 has a similar problem to the BCM53011.

Signed-off-by: Ian Kent <raven@themaw.net>

SVN-Revision: 44680
2015-03-11 17:32:02 +00:00
Rafał Miłecki
c3b9b35155 bcm53xx: fix printing NAND controller revision
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44622
2015-03-07 12:31:42 +00:00
Rafał Miłecki
c2cf1abf8f bcm53xx: switch to IRQ buttons (keys)
Now bcma provides IRQ domain we don't have to poll anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44596
2015-03-03 23:15:55 +00:00
Rafał Miłecki
a416029d4d bcm53xx: add one more NVRAM possible size (0x180000)
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44497
2015-02-20 07:07:53 +00:00
Rafał Miłecki
b5310e180d bcm53xx: use bcm47xx_wdt for restarting device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44408
2015-02-11 14:41:07 +00:00
Rafał Miłecki
6bafb2f810 bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44390
2015-02-11 10:11:00 +00:00
Rafał Miłecki
ddcbef5766 kernel: backport bcma patches queued for 3.20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44385
2015-02-11 10:04:51 +00:00
Rafał Miłecki
3ae30df7db bcm53xx: drop unused (and broken) GPIOLIB patch
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44383
2015-02-11 08:42:34 +00:00
Rafał Miłecki
3dbaab6f67 bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44367
2015-02-09 18:43:05 +00:00
Rafał Miłecki
539cd23892 bcm53xx: fix partitions on Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44219
2015-01-30 07:25:43 +00:00
Rafał Miłecki
1d1a1c19bf bcm53xx: fix booting BCM4709
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44218
2015-01-30 06:58:35 +00:00
Rafał Miłecki
ee75859533 bcm53xx: fix Netgear R8000 serial console
Thanks raven-auand.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44217
2015-01-30 06:30:44 +00:00
Rafał Miłecki
251b42d491 bcm53xx: early support for Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44186
2015-01-28 21:55:43 +00:00
Rafał Miłecki
bba98a3c53 bcm53xx: backport official Buffalo WZR-900DHP patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44070
2015-01-21 07:23:31 +00:00