Commit Graph

601 Commits

Author SHA1 Message Date
Rafał Miłecki
6b161bb8d5 lua5.3: package Lua 5.3 version
This package provides an interpreter and compiler for Lua 5.3.5. It has
been decided to use separated package due to a backward incompatibility
of Lua 5.2 and 5.3.

This package/version:
1) Does not include lnum patch as its author didn't decide to port it to
   the new version.
2) Does not provide shared library as the old patch doesn't apply
   anymore. It can be added later if needed.
3) Does not come with examples package as tests were dropped by upstream
   developers.

That said there is definitely a room for improvement and any further
work is highly appreciated. It works however and can be safely pushed as
a basic/early package release.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-06-28 09:25:59 +02:00
Rafał Miłecki
fe59b46ca7 lua: include version number in installed files
This will allow installing Lua 5.1 and newer versions at the same time.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-06-28 09:25:59 +02:00
Rafał Miłecki
c0c5c63514 lua: clean up host patch fuzz
Refresh host patches to match target changes from the commit
4e800716ac ("lua: clean up patch fuzz").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-06-28 09:25:59 +02:00
Petr Štetiar
f924fab3dc upgs: update to latest git HEAD
cd7eabcd8c9d ugps: Fix compilation under 64-bit
198c06051dd0 Fix build error caused by enabled extra compiler warnings
fc2ab8756b3b Enable extra compiler warnings

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-26 07:00:20 +02:00
Jo-Philipp Wich
74739c4228 treewide: fix syntax errors exposed after kconfig update
After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf
parser became more strict as a side effect and started to spew a series of
warnings when evaluating our generated kconfig sources:

  tmp/.config-package.in:705:warning: ignoring unsupported character '@'

The root cause of these warnings is a wrong use of the @SYMBOL dependency
syntax in various Makefile. Fix the corresponding Makefiles by turning
`@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-06-20 14:16:08 +02:00
Hannu Nyman
696c511fb4 busybox: update to 1.31.0
* Update busybox to version 1.31.0.
    New applets: ts, i2ctransfer
    New (restored) feature: error/info levels in syslog messages.
    Leave new features disabled by default.
* Refresh patches
* Remove patch that was backported from upstream

Config refreshed with commands below, after which the OpenWrt specific
config defaults (ipv6, login session child) were corrected:

  make package/busybox/compile   (to populate the build_dir)

  cd package/utils/busybox/config/
  ../convert_menuconfig.pl ../../../../build_dir/target-mips_24kc_musl/busybox-1.31.0

  cd package/utils/busybox
  ./convert_defaults.pl < ../../../build_dir/target-mips_24kc_musl/busybox-1.31.0/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2019-06-15 19:26:47 +02:00
Yousong Zhou
62be427067 busybox: strip off ALTERNATIVES spec
Now that busybox is a known alternatives provider by opkg, we remove the
ALTERNATIVES spec and add a note to make the implicit situation clear

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-06-14 01:51:24 +00:00
Paul Spooren
35a70d6262 f2fs-tools: fixup SPDX license
The f2fs-tools have a wrong PKG_LICENSE with is not SPDX compatible.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-12 23:55:53 +02:00
Konstantin Demin
10011f91c5 busybox: add ALTERNATIVES for brctl
Busybox brctl applet conflicts with the version from bridge-utils.
Fix this by using ALTERNATIVE support for brctl in busybox.

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2019-06-08 13:51:40 +02:00
Mikael Magnusson
8128a7e4fc busybox: fix: ip addr flush hangs when run by non-root user
Add upstream patch from:
https://git.busybox.net/busybox/commit/?id=028c5aa18b5273c029f0278232d922ee1a164de6

The patch fixes a problem with an infinite loop causing 100% CPU usage
when running the following command /lib/preinit/10_indicate_preinit
without the CAP_NET_ADMIN capability (such as in Docker):
  ip -4 address flush dev $pi_ifname

Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch]
2019-05-28 13:18:58 +02:00
Liangbin Lian
4bb9af48ca lua: lnum: fix strtoul based number parsing
Lua's LNUM patch currently doesn't parse properly certain numbers as
it's visible from the following simple tests.

On x86_64 host (stock Lua 5.1.5, expected output):

 $ /usr/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)'

  2147483648
  8796093022208
  4294967296

On x86_64 host:

 $ staging_dir/hostpkg/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)'

  -2147483648
  0
  0

On x86_64 target:

 $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)'

  -2147483648
  0
  0

On ath79 target:

 $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)'

  -2147483648
  8796093022208
  4294967296

It's caused by two issues fixed in this patch, first issue is caused by
unhadled strtoul overflow and second one is caused by the cast of
unsigned to signed Lua integer when parsing from hex literal.

Run tested on:

 * Zidoo Z9S with RTD1296 CPU (aarch64_cortex-a53)
 * qemu/x86_64
 * qemu/armvirt_64
 * ath79

Signed-off-by: Liangbin Lian <jjm2473@gmail.com>
[commit subject/message touches, fixed From to match SOB, fixed another
 unhandled case in luaO_str2i, host Lua, package bump]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-05-23 10:19:52 +02:00
Rosen Penev
e49b6bb618 xfsprogs: Replace valloc with posix_memalign
Fixes compilation under uClibc-ng.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-05-11 23:10:10 +02:00
Christian Lamparter
bdaaf66e28 utils/spidev_test: build package directly from Linux
Jeff Kletsky noted in his patch titled:
"utils/spidev_test: Update to current source from upstream Linux"
that the spidev_test utility OpenWrt ships is severly out of date.

Instead of updating the spidev_test.c from the current kernel,
this patch replaces the package building code to utilize the
very file that gets shipped with the kernel we compiling for
anyway much like the "perf" package already does.

Reported-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-05-11 16:37:11 +02:00
Hauke Mehrtens
2d0a2ff1e0 adm5120: Remove unmaintained target
This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-05-03 21:27:12 +02:00
Christian Lamparter
133bad46a6 adb: fix missing PKG_MIRROR_HASH
This package was missing a PKG_MIRROR_HASH value.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-21 00:57:54 +01:00
Daniel Engberg
9b16a69941 usbutils: Update usb.ids to 0.321
Update usb.ids to 0.321

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2019-03-18 20:43:09 +01:00
David Bauer
5389db72e3 fritz-tools: add support for IPQ40xx platform
AVM devices based on Qualcomm IPQ40xx do not store sector health
information in the OOB area. Make this check optional to support this
platform.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-03-13 16:25:34 +01:00
Hans Dedecker
2cd28c9a08 busybox: add missing install dir
Add missing /usr/sbin install dir fixing :

install: cannot create regular file 'build_dir/target-x86_64_musl/busybox-1.30.1/.pkgdir/busybox/usr/sbin/ntpd-hotplug': No such file or directory

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-03-11 17:03:17 +01:00
Andy Binder
50717510e7 fritz-tools: add fritz_tffs_nand_read tool
A tool for reading the TFFS partitions (a name-value storage usually
found in AVM Fritz!Box based devices) on nand flash.

Copyright (c) 2018 Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

Based on the fritz_tffs_read tool:
    Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
and on the TFFS 2.0 kernel driver from AVM:
    Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de>
and the TFFS 3.0 kernel driver from AVM:
    Copyright (C) 2004-2014 AVM GmbH <fritzbox_info@avm.de>
and the OpenWrt TFFS kernel driver:
    Copyright (c) 2013 John Crispin <blogic@openwrt.org>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de>
Signed-off-by: Andy Binder <AndyBinder@gmx.de>
2019-03-10 16:49:23 +01:00
Yousong Zhou
eb6f5a58b9 busybox: sync Config.in files
The change was made with the following commands

	cd package/utils/busybox/config
	../convert_menuconfig.pl ~/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/busybox-1.30.1

convert_defaults.pl has no changes other than overwriting defaults for
BUSYBOX_DEFAULT_FEATURE_IPV6

Resolves FS#2146

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-03-01 08:09:41 +00:00
Yousong Zhou
157072ea2b busybox: unindent busybox Config.in
This is to align with upstream change 72089cf ("config: deindent all
help texts") and to make the follow-up change syncing Config.in files
with current busybox version more reviewable

It was made with the following commands

	cd package/utils/busybox/config
	find . -name 'Config.in' | xargs sed -ir -e 's/^\t  \([^ ]\)/\t\1/'

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-03-01 08:09:41 +00:00
Rosen Penev
cd519abdbc mdadm: Update to 4.1
Tested on GnuBee PC1.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-02-17 17:33:18 +01:00
Hannu Nyman
94993a79f8 busybox: update to 1.30.1
Minor bugfix release. Fixes for
 * bc/dc
 * sed (backslash parsing for 'w' command)
 * ip (vlan fixes)
 * grep (fixes for -x -v)
 * ls (-i compat)

No need to refresh patches or config defaults

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2019-02-14 21:43:07 +01:00
Val Kulkov
ed514e7f9e busybox: keep syslog.conf during sysupgrade
If a user finds that logd is too barebone for their needs and wishes
to have more control over syslog, the user presently has an option
to enable CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG and configure syslog
with settings in /etc/syslog.conf.

Presently /etc/syslog.conf silently disappears on sysupgrade. This
patch prevents such unwanted behaviour if busybox syslog is enabled
via CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG.

Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
2019-01-30 12:30:03 +01:00
Rosen Penev
8fd5091696 e2fsprogs: Update to 1.44.5
Added e4crypt tool for encrypting files and directories. To work properly
requires kernel and work on keyutils. That will be done in a future commit

Some top-level reorganization for consistency between packages.

Tested on GnuBee PC1 (mt7621).

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-01-26 23:11:49 +01:00
Jo-Philipp Wich
0e70f69a35 treewide: revise library packaging
- Annotate versionless libraries (such as libubox, libuci etc.) with a fixed
  ABI_VERSION resembling the source date of the last incompatible change
- Annotate packages shipping versioned library objects with ABI_VERSION
- Stop shipping unversioned library symlinks for packages with ABI_VERSION

Ref: https://openwrt.org/docs/guide-developer/package-policies#shared_libraries
Ref: https://github.com/KanjiMonster/maintainer-tools/blob/master/check-abi-versions.pl
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-24 10:39:30 +01:00
Andy Walsh
94f6030170 librpc: remove package
* replaced with packages/libtirpc
* remove busybox options rarely used/deprecated
BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
BUSYBOX_CONFIG_FEATURE_INETD_RPC

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
2019-01-22 13:29:46 +01:00
Jo-Philipp Wich
1211832977 busybox: handle crypt() errors in loginutils
The crypt(3) function is allowed to fail with either EINVAL or ENOSYS when
the given salt is either invalid or when the requested algorithm is not
implemented.

In such a case, libbb's pw_encrypt() function will silently convert the
crypt() NULL return value into an empty string which is then processed
without further errors by utilities such as chpasswd or passwd, causing
them to set an empty password when an unsupported cipher is requested.

Patch the relevant users of pw_encrypt() to abort in case an empty hash
is returned by pw_encrypt() in order to mitigate the problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-01-22 12:08:00 +01:00
Jeffery To
d13e86d4c2 procd: Add wrapper for uci_validate_section()
This adds a wrapper (uci_load_validate) for uci_validate_section() that
allows callers (through a callback function) to access the values set by
uci_validate_section(), without having to manually declare a
(potentially long) list of local variables.

The callback function receives two arguments when called, the config
section name and the return value of uci_validate_section().

If no callback function is given, then the wrapper exits with the value
returned by uci_validate_section().

This also updates several init scripts to use the new wrapper function.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
2019-01-22 09:05:59 +01:00
Hans Dedecker
7a4075bd10 busybox: fix ALTERNATIVES alphabetical ordering
Commit 3f0eb71dae added ALTERNATIVES for wget but not in correct
alphabetical order; increase PKG_RELEASE as well.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-13 21:45:14 +01:00
Hans Dedecker
3f0eb71dae busybox: add ALTERNATIVES for wget
Busybox wget applet conflicts with the version from uclient.
Fix this by using ALTERNATIVE support for wget in busybox.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-13 18:27:28 +01:00
Hauke Mehrtens
6be064c788 bzip2: fix hardening build
Set the LDFLAGS otherwise it will not get the target hardening flags or
any other generic flags provided in the LDFLAGS

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:38:38 +01:00
Daniel F. Dickinson
a54129d8aa busybox: Add ALTERNATIVES for findutils
Currently busybox find and xargs conflict with the versions from
findutils package.  Fix this by using ALTERNATIVES in busybox
and the related findutils (from packages feed) commit.

The conflict is due to the binaries being in the the same place
in rootfs and opkg not being happy about that.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2019-01-03 22:24:10 +01:00
Hannu Nyman
9b9274342c busybox: update to 1.30.0
Update busybox to 1.30.0.
Refresh patches.
Leave new features disabled by default.

Config refreshed via:

  cd package/utils/busybox/config/
  ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0

  make package/busybox/compile

  cd package/utils/busybox
  ./convert_defaults.pl < ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-1.30.0/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2019-01-01 14:10:47 +01:00
Rosen Penev
d2b16a59d5 f2fs-tools: Update to 1.12.0
Added two upstream mailing list patches that fix behavior under big endian
systems. Issue was present since version 1.11.0.

Tested on Turris Omnia.

Original discussion: https://github.com/openwrt/openwrt/pull/1575

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-16 00:57:19 +01:00
Daniel Engberg
59ff8687c7 util-linux: Update to 2.33
Update util-linux to 2.33
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-15 21:19:37 +01:00
Daniel Engberg
a95bef0579 bzip2: Replace main site with mirrors (FS#1913)
Use Gentoo and FreeBSDs distfile caches as mirrors because
main site/domain is abandoned.
Source: https://lwn.net/Articles/762264/

Fixes FS#1913

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-12 17:09:09 +01:00
Alexander Couzens
81d7f82441
ugps: update to latest git HEAD
07528d43f9bc nmea.c: set _BSD_SOURCE to have timegm() & stime() on musl
b88037b6bf6a check timegm return code
ccabdf6c235f nmea.c: Add null byte to nmea fields
cdc1478a8133 remove deprication warning

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-11 02:37:05 +01:00
John Crispin
3e8ef61c01 package/: fix $(PROJECT_GIT) usage
Signed-off-by: John Crispin <john@phrozen.org>
2018-10-11 08:42:52 +02:00
Hans Dedecker
16c712501c e2fsprogs: fix glibc compile issue (FS#1749,FS#1796)
Fixes the following build error:

.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_post’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_wait'
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_init’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_destroy’

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-08 17:24:23 +02:00
Hans Dedecker
ec9576607d busybox: fix IPv6 dependency
Commit 9f0cb135dd made BUSYBOX_CONFIG_FEATURE_IPV6 dependant on IPV6 but
did not make its default value BUSYBOX_DEFAULT_FEATURE_IPV6 dependant
on IPV6. BUSYBOX_DEFAULT_FEATURE_IPV6 will have as default value y if
IPV6 is enabled otherwise n.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-07 20:46:51 +02:00
Rosy Song
fcfb9e4ded util-linux: add eject support
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-28 23:13:22 +02:00
Rosy Song
9f0cb135dd busybox: fix dependency for IPV6
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-09-23 17:45:08 +02:00
Rosen Penev
5efd080e20 mdadm: Install /etc/config file as 600
/etc/config/mdadm is only used by the init script which is ran as root.
There is no need for it to be readable by anything else.

Added PKG_CPE_ID for proper CVE tracking.

Small reorganization for consistency between Makefiles.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:42:13 +01:00
Rosen Penev
873801a671 usbmode: Update modeswitch data to 20170806
Changed hotplug file to 600 as it is only read by procd, which runs as
root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-19 09:41:28 +01:00
Hannu Nyman
4a3298c124 busybox: update to 1.29.3
Update busybox to 1.29.3, minor bugfix release

https://git.busybox.net/busybox/log/?h=1_29_3

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-09-15 08:57:14 +02:00
Rosen Penev
a9aa25c8b6 usbutils: Update usb.ids to 0.315
Referencing the version instead of revision should fix uscan.

Tested on Turria Omnia.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-09-10 09:10:20 +02:00
Bruno Randolf
fe960cead7 ugps: Update to fix position calculation
This is necessary to get my position right.
Without this my longitude is incorrecty -15.85xxxx instead of -16.52yyyy

Signed-off-by: Bruno Randolf <br1@einfach.org>
2018-08-29 08:31:10 +02:00
Bruno Randolf
6b14a73f4f ugps: Add option disabled
Like many other packages, an option to disable can be practical.

Signed-off-by: Bruno Randolf <br1@einfach.org>
2018-08-29 08:31:10 +02:00
Rosen Penev
f9469efbfa bzip2: Fix CVE-2016-3189
Issue causes a crash with specially crafted bzip2 files.

More info: https://nvd.nist.gov/vuln/detail/CVE-2016-3189

Taken from Fedora.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-08-23 07:15:35 +02:00
Daniel Engberg
d1ea8ac3b4 util-linux: Update to 2.32.1
Update util-linux to 2.32.1
For release notes see https://lwn.net/Articles/759922/

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-08-16 22:29:28 +02:00
Christian Lamparter
7b1b49bd32 packages: nvram: make it possible to include it for ath79 targets
The WD My Net Range Extender stores the MAC addresses inside the
nvram partition. This utility can extract it, but it's currently
not avilable on the ath79 target. Hence, this patch adds the
necessary target declaration, so it can be built.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-08-13 08:46:22 +02:00
Rob Mosher
8a3582fa8a busybox: prevent compile hang with bzip2 enabled
The BZIP2_SMALL option was not being exposed via Config.in which
caused the build to fail as 'yes' is piped to the config during
build.  As it's expecting a number, it gets stuck in a loop.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
2018-08-08 22:08:49 +02:00
Hannu Nyman
12fb4bb834 busybox: update to 1.29.2
* Update busybox to 1.29.2
* refresh default config
* remove upstreamed patches

Config refreshed with
  cd config/
  ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/busybox-1.29.2
  cd ..
  ./convert_defaults.pl < ../../../build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/busybox-1.29.2/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Tested-by: Hans Dedecker <dedeckeh@gmail.com>
2018-08-02 22:36:00 +02:00
Eneas U de Queiroz
f63f20fb93 adb: added patch for openssl 1.1.0 compatibility
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-08-01 11:44:30 +02:00
Daniel Engberg
5647cc7bd4 treewide: Bump PKG_RELEASE due to mbedtls update
Bump PKG_RELEASE on packages that depends on (lib)mbedtls to avoid library
mismatch.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-30 10:35:12 +02:00
Rosen Penev
0394ca26c3 admswconfig: Remove dead URL + HTTPS
Found using uscan.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-30 10:35:11 +02:00
Daniel Golle
af4b23dde2 util-linux: package blockdev executable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-07-27 12:51:03 +02:00
Daniel Engberg
0a4cd1a682 package/utils/f2fs-tools: Update to 1.11.0
Update f2fs-tools to 1.11.0

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-16 15:12:18 +02:00
Daniel Engberg
804c51e1e6 package/utils/e2fsprogs: Update to 1.44.3
Update e2fsprogs to 1.44.3
Enable threads
Enable LTO

Numbers on mips_24kc (a few packages):

Old --> New --> LTO and threads
e2fsprogs_*_mips_24kc.ipk: 173 --> 174 --> 154kbyte
libblkid_*_mips_24kc.ipk:  114 --> 114 --> 114kbyte
libext2fs_*_mips_24kc.ipk: 138 --> 139 --> 139kbyte

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-16 15:12:18 +02:00
Felix Fietkau
8c11133c9d busybox: compile with LTO enabled
In the default configuration on MIPS, it reduces the .ipk size
from 214k to 207k

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-07-13 17:22:53 +02:00
Daniel Engberg
10554cfcc1 mbedtls: Update to 2.11.0
Update mbed TLS to 2.11.0

Disable OFB block mode and XTS block cipher mode, added in 2.11.0.
The soVersion of mbedtls changed, bump PKG_RELEASE for packages that use mbedTLS
This is to avoid having a mismatch between packages when upgrading.

The size of mbedtls increased a little bit:
ipkg for mips_24kc before:
163.846 Bytes
ipkg for mips_24kc after:
164.382 Bytes

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-07-07 18:29:14 +02:00
Rosen Penev
f23271f3b4 usbutils: Switch to Fedora usbutils
The Gentoo GitHub mirror went down. One benefit of Fedora's usb.ids file
is that it's versioned.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-07-02 07:12:34 +02:00
Daniel Engberg
1b46bce850 package/utils/e2fsprogs: Update to 1.44.2
Update e2fsprogs to 1.44.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-06-26 10:26:05 +02:00
Hans Dedecker
b8bdeace39 busybox: rename udhcpc-remove-code-which-requires-server-ID-to-be-on patch
Move udhcpc-remove-code-which-requires-server-ID-to-be-on patch from 500
to 400

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-21 22:48:23 +02:00
Hans Dedecker
c6e50075f2 busybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fix
Replace 204-udhcpc_no_msg_dontroute patch by the upstream busybox fix
which removes the code which requires the server ID to be on local
network

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-21 22:33:35 +02:00
Magnus Kroken
ccc728a0e2 busybox: update to 1.28.4
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-06-18 22:05:30 +02:00
Paul Spooren
cbf69fb2ad cron: add procd listeners for crontabs
Add procd file listeners to check files in `/etc/crontabs/`.

Also unified a bit the function style.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2018-06-18 18:21:20 +02:00
Christian Lamparter
daf19649db mtd-utils: revert faulty upstream patch for now
Some of the ubi-tools in the upstream mtd-utils have been
broken by a bad patch upstream. It causes major breakage
during sysupgrade when the kernel, rootfs, ... volumes
are deleted in the wrong order.

This patch therefore reverts the faulty upstream commit which
fixes the bug.

linux-mtd mailing-list thread:
<http://lists.infradead.org/pipermail/linux-mtd/2018-June/081562.html>

Cc: John Crispin <john@phrozen.org>
Reported-by: L. Wayne Leach <LLeachii@aol.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-06-08 09:31:37 +02:00
Adi Shammout
e4259bed3f busybox: udhcpc: no MSG_DONTROUTE when sending packet
This reverts a change made in Sep 2017 [1] which introduced
MSG_DONTROUTE flag to prevent udhcpc from reaching out to servers on a
different subnet. That change violates RFC2131 by forcing fully
configured clients, who got their configurations through an offer
relayed by a DHCP relay, from renewing through a unicast request
directly to the DHCP server, resulting in the client resorting to
boradcasting lease extension requests instead of unicasting them,
further breaking RFC2131.

The problem with MSG_DONTROUTE appears when talking to a properly
configured DHCP server that rejects non-compliant requests. Such server
will reject lease extension attempts sent via broadcast rather than
unicast, as is the case with Finnish ISPs Telia and DNA as well as
Estonian ISP Starman. Once the lease expires without renewal, udhcpc
enters init mode, taking down the interfaces with it, and thus causing
interruption on every lease expiry. On some ISPs (such as the ones
mentioned above) that can be once every 10-20 minutes. The interruptions
appear in the logs as such:
----
udhcpc: sending renew to x.x.x.x
udhcpc: send: Network unreachable
udhcpc: sending renew to 0.0.0.0
udhcpc: sending renew to 0.0.0.0
...
udhcpc: lease lost, entering init state
Interface 'wan' has lost the connection
Interface 'wan' is now down
Network alias 'eth0' link is down
udhcpc: sending select for y.y.y.y
udhcpc: lease of y.y.y.y obtained, lease time 1200
Network alias 'eth0' link is up
Interface 'wan' is now up
----

During lease extension, a fully configured client should be able to
reach out to the server from which it recieved the lease for extension,
regardless in which network it is; that's up to the gateway to find. [2]
This patch ensures that.

[1]
http://lists.busybox.net/pipermail/busybox-cvs/2017-September/037402.html
[2]
https://www.netmanias.com/en/post/techdocs/6000/dhcp-network-protocol/
understanding-dhcp-relay-agents

Signed-off-by: Adi Shammout <adi.shammout@outlook.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-06-07 21:44:04 +02:00
Hauke Mehrtens
cb11b23d60 mbedtls: update to version 2.9.0
The soversion was changed in this version again and is now aligned with
the 2.7.2 version.
The size of the ipkg file stayed mostly the same.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-05-22 20:47:20 +02:00
Yousong Zhou
f87dff8f72 flock: enable alternatives support
Fixes FS#1510

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-05-07 15:50:18 +08:00
Yousong Zhou
46a2c0d9c5 busybox: order alternatives in alphabetical order
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-05-07 15:50:18 +08:00
Hauke Mehrtens
3e93df0707 mtd-utils: activate --gc-sections
This reduces the size of the binary a bit:

old:
 37556 bin/targets/lantiq/xrx200/packages/nand-utils_2.0.1-1_mips_24kc.ipk
 81697 bin/targets/lantiq/xrx200/packages/ubi-utils_2.0.1-1_mips_24kc.ipk

new:
 27450 bin/targets/lantiq/xrx200/packages/nand-utils_2.0.1-1_mips_24kc.ipk
 71796 bin/targets/lantiq/xrx200/packages/ubi-utils_2.0.1-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-04-28 15:29:22 +02:00
Syrone Wong
f37f63f38c mtd-utils: update to 2.0.2
010-fix-rpmatch.patch is upstream, removed from our patchset
The file structure is changed, modify patch accordingly
use CONFIGURE_ARGS to disable tests, xattr and lzo

Compile and run tested on mvebu and x86_64

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-04-28 15:29:17 +02:00
Paul Wassi
3c79bb5606 package/utils/lua: cleanup source mirrors
Remove inactive mirrors from the sources list.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-04-18 23:59:32 +02:00
Hauke Mehrtens
7b758f7f4f ustream-ssl: px5g: Rebuild package
mbedtls changed in version 2.7.0 the soversion of the libmbedcrypto.so
library, all applications using this shared library have to be
recompiled to be able to load the new library.

Some binaries got rebuild to for the 2.7.0 release and are now using
libmbedcrypto.so.1, the older ones are still using libmbedcrypto.so.0.

Fixes: 75c5ab4ca ("mbedtls: update to version 2.7.0")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-18 23:57:25 +02:00
Hannu Nyman
c089671339 busybox: update to 1.28.3
Bug fix release. 1.28.3 has fixes for
* ash and hush (do not leave stray open file destriptors in children),
* cpio (fix for symlink extraction),
* grep ("grep -Fw a" was matching "aa").

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-04-05 22:15:58 +02:00
Daniel Engberg
fe8350e92e package/utils/f2fs-tools: Update to 1.10.0
Update f2fs-tools to 1.10.0

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-04-03 23:26:45 +02:00
Adrià Llaudet
482bc646a5 nand-utils: add flash_erase utility
flash_erase utility allows to erase MTD partitions on NAND flash.
Useful when you want to clean or write an MTD partition from scratch.

e.g., before using kobs-ng to flashing SPL images it's recommended
to erase the MTD partition to ensure it's empty.

Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
2018-04-03 23:26:45 +02:00
Hannu Nyman
d674422a81 busybox: update to 1.28.2
Update busybox to 1.28.2, refresh patches and default config.

* modify 230-add_nslookup_lede.patch as opt_complementary was removed
    Also move nslookup_longopts variable declaration to be inside
    the same conditional as the function itself.
* modify 250-date-k-flag.patch to match upstream (opt_complementary)
* remove 600-cve-2017-16544.patch that is upstreamed

Notes about config changes:
* Some applet-specific LONG_OPTIONS config options were removed
* Config help text indentation changed, caused lots of
  text formatting changes for convert_menuconfig.pl
* convert_defaults.pl moved lots of defaults around, summary of
  actual changes below

New applets/features:
---------------------
ARCH
HEXEDIT
MINIPS
NETCAT
NUKE
RESUME
RUN_INIT
SETFATTR

New options:
------------
FEATURE_CATN
FEATURE_CROND_SPECIAL_TIMES
FEATURE_LIBBUSYBOX_STATIC
FEATURE_SETPRIV_CAPABILITIES
FEATURE_SETPRIV_CAPABILITY_NAMES
FEATURE_SETPRIV_DUMP
FEATURE_SH_READ_FRAC
FEATURE_SWAPONOFF_LABEL
FEATURE_VOLUMEID_MINIX
FEATURE_XARGS_SUPPORT_ARGS_FILE
FEATURE_XARGS_SUPPORT_PARALLEL
HUSH_GETOPTS
HUSH_READONLY
HUSH_TIMES

Removed:
--------
FEATURE_HAVE_RPC
MSH

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-04-03 23:26:45 +02:00
Hauke Mehrtens
56d0dd56e9 mtd-utils: Mark some lzma functions as static
These functions are not declared in any header file and only used in
same compile unit, mark them as static to remove one gcc warning and
make it easier for the compiler to optimize them out.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-04-03 23:26:45 +02:00
Jan Pavlinec
8c2b8d862b xfsprogs: add xfs-admin util
Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
2018-03-31 16:30:30 +02:00
Paul Wassi
198172c048 package/utils/e2fsprogs: update to 1.44.1
Update e2fsprogs to upstream 1.44.1 (feature and bugfix release)

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:30:27 +02:00
Paul Wassi
960b90f435 packages/util/util-linux: Update to 2.32
- Update to upstream 2.32
- License file 'getopt/COPYING' not present (any more)
- Disable 'chown root:root'-commands during 'make install'
- Add new dependency to wipefs
- Refresh patch 003

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-31 16:30:17 +02:00
Hans Dedecker
02fba1a181 busybox: drop providing virtual package ip
Drop providing the virtual package ip by busybox which was added in commit
1cec4d4ef0.

Letting busybox provide the virtual package ip is not optimal for the
following reasons :

	- Applications depending on ip expect either the ip-full or
	  ip-tiny package to be enabled.
	- Busybox ip applet cannot be added or removed at runtime

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-03-22 21:54:20 +01:00
Pawel Dembicki
5323477184 firmware: add JBOOT based devices config extractor
Adds tool to extract MAC and pre-calibration data required for JBOOT
based D-Link routers.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-03-18 22:22:38 +01:00
Jo-Philipp Wich
becf58e080 e2fsprogs: fix InstallDev recipe
Create the correct bin directory before staging the host utilities.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-03-18 14:05:28 +01:00
Hauke Mehrtens
e273860351 mtd: fix compile warnings
This callback should have one parameter less, this parameter is not used
so this was not a so big problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-18 00:59:18 +01:00
Andy Walsh
20d63ebc94 e2fsprogs: break out libcomerr/libss, FS#1310
libext2fs breaks krb5 by always installing its own copies of libcom_err.so
and libss.so.

Move the libraries into separate libcomerr and libss packages respectively
and add a host build recipe to stage the required compile_et and mk_cmds
utilities for use by other packages.

This allows the krb5 package to be fixed to use the system wide libcomerr
and libss libraries.

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
[rename libcom_err to libcomerr, make compile_et and mk_cmds relocatable,
 cleanup makefile, add dependency on host build, reword commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-03-14 18:49:24 +01:00
Jo-Philipp Wich
093b75e106 jsonfilter: update to latest git HEAD
c7e938d implement POSIX regexp support
cd6629f lexer: fix encoding 7 bit escape sequences
8614470 main: implement array mode

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-03-14 18:48:23 +01:00
Matthias Schiffer
b8d9a064f0
busybox: remove i386-specific build flags
busybox tries to be smart and passes a number of additional flags to the
compiler. Unfortunately, the i386-specific flags break ABI compatiblity
with libc.

Fixes busybox crashes observed on x86-generic with GCC 7.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-12 12:49:03 +01:00
Toni Uhlig
57468c7142 util-linux: added unshare and nsenter executables
Signed-off-by: Toni Uhlig <matzeton@googlemail.com>
2018-03-09 22:15:01 +01:00
Tomasz Moń
9a0cc49089 util-linux: add lscpu package
lscpu is used by lxc-debian template.

Signed-off-by: Tomasz Moń <desowin@gmail.com>
2018-02-24 11:24:20 +01:00
Julien Dusser
df0bd42fde build: add hardened builds with PIE (ASLR) support
Introduce a configuration option to build a "hardened" OpenWrt with
ASLR PIE support.

Add new option PKG_ASLR_PIE to enable Address Space Layout Randomization (ASLR)
by building Position Independent Executables (PIE). This new option protects
against "return-to-text" attacks.

Busybox need a special care, link is done with ld, not gcc, leading to
unknown flags. Set BUSYBOX_DEFAULT_PIE instead and disable PKG_ASLR_PIE.

If other failing packages were found, PKG_ASLR_PIE:=0 should be added to
their Makefiles.

Original Work by: Yongkui Han <yonhan@cisco.com>
Signed-off-by: Julien Dusser <julien.dusser@free.fr>
2018-01-27 16:46:45 +01:00
Dirk Brenken
ef8cd6be1e util-linux: add fstrim support
This PR adds optional fstrim support

Signed-off-by: Dirk Brenken <dev@brenken.org>
2018-01-18 08:04:18 +01:00
Jo-Philipp Wich
fe920d01bb treewide: replace LEDE_GIT with PROJECT_GIT
Remove LEDE_GIT references in favor to the new name-agnostic
PROJECT_GIT variable.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-10 21:27:32 +01:00
Kevin Darbyshire-Bryant
4e800716ac lua: clean up patch fuzz
Refresh patches to tidy up fuzz.  No functional changes

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-01-05 10:42:34 +01:00
Kevin Darbyshire-Bryant
b61a648e4a busybox: clean up patch fuzz
Refresh patches to tidy up fuzz.  No functional changes

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-01-05 10:35:51 +01:00
Roman Yeryomin
2277cd1249 busybox: enable flock by default
This is needed for procd init script protection to work.
flock adds 4248 bytes to stripped busybox binary.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-01-02 07:51:39 +01:00
John Crispin
7c0a2bc930 busybox: backport cve-2017-16544 fix
In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2,
the tab autocomplete feature of the shell, used to get a list of filenames
in a directory, does not sanitize filenames and results in executing any
escape sequence in the terminal. This could potentially result in code
execution, arbitrary file writes, or other attacks.

Fixes: FS#1181 - CVE-2017-16544:

Backport the patch from:
https://git.busybox.net/busybox/commit/?id=c3797d40a1c57352192c6106cc0f435e7d9c11e8
https://nvd.nist.gov/vuln/detail/CVE-2017-16544

Signed-off-by: Derek Werthmuller <thewerthfam@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
2018-01-02 07:14:08 +01:00
Matthias Schiffer
20c349f68c
busybox: add missing TARGET_CPPFLAGS and TARGET_LDFLAGS
Unconditionally pass TARGET_CPPFLAGS (not passed at all before) and
TARGET_LDFLAGS (passed only in certain non-default configuration before the
Makefile streamlining). Without these flags, hardening options
(PKG_FORTIFY_SOURCE and PKG_RELRO) were not actually applied to busybox.

The addition of these flags increases the size of the stripped busybox
binary by about 6KB (~4KB with fortify headers, ~2KB with "-znow -zrelro")
with the default hardening options PKG_FORTIFY_SOURCE_1 and PKG_RELRO_FULL.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-12-28 12:26:23 +01:00
Matthias Schiffer
a10fae1133
busybox: streamline Makefile
Use default Build/Install steps where possible. No binary change in default
configuration, so PKG_RELEASE is not incremented.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-12-28 12:24:25 +01:00
John Crispin
5bbd493e66 usbmode: update to latest git HEAD
f40f84c support PantechMode
d8dc335 support Quanta and Blackberry modes
333e486 fix support for Option modems

Signed-off-by: John Crispin <john@phrozen.org>
2017-12-24 09:03:01 +01:00
Lucian Cristian
1044723ec9 busybox: enable find -newer needed for shorewall firewall, no size increase on binary
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-12-14 09:29:30 +01:00
Rosen Penev
06f8b4ddbd e2fsprogs: Update to 1.43.7
Compiled and tested on ramips with no noticeable problems.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-12-14 09:29:30 +01:00
Jo-Philipp Wich
f4c68e1cc6 busybox: fix glibc libresolv dependency for LEDE nslook applet
Fixes d1ba483472 merge: busybox: update CONFIG_NSLOOKUP in busybox config.
Fixes FS#1212.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-12-10 14:26:19 +01:00
Zoltan HERPAI
d1ba483472 merge: busybox: update CONFIG_NSLOOKUP in busybox config and respective patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Zoltan HERPAI
23f774f727 merge: packages: update branding in core packages
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Rosen Penev
fc4e7bdca7 usbutils: Update usb.ids file to latest
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-11-22 20:45:07 +01:00
Rafał Miłecki
36a92274a8 otrx: fix memory leak in otrx_create_append_zeros
A "free" call was missing after allocating a buffer.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-17 11:32:51 +01:00
Rafał Miłecki
70837168ef otrx: bump buffer size in otrx_create_append_file
Usually this function is called for appending some small files only
(like fs marks) but let's just make it more generic and capable of
handling bigger files easily. Increasing buffer to 1 KiB shouldn't hurt.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-17 11:30:31 +01:00
Rafał Miłecki
ab8f20c18d otrx: drop unused otrx_create_parse_options function
It was there in case of adding some "create" command options that should
be parsed before actually creating the output image. It seems we don't
need any at this point so let's drop this function for now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-17 11:30:31 +01:00
Alexander Couzens
c61a239514
add PKG_CPE_ID ids to package and tools
CPE ids helps to tracks CVE in packages.
https://cpe.mitre.org/specification/

Thanks to swalker for CPE to package mapping and
keep tracking CVEs.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-11-17 02:24:35 +01:00
Rafał Miłecki
b15c563929 otrx: always align image to 0x1000
This seems to match what the original trx tool and mjn3's replacement
do.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-16 09:33:56 +01:00
Zhai Zhaoxuan
c382237ac3 packages: nvram: fix memory leak in _nvram_free
The value of nvram_tuple_t is allocated in _nvram_realloc,
but it is not freed in _nvram_free.

Signed-off-by: Zhai Zhaoxuan <zhaizhaoxuan@xiaomi.com>
2017-11-15 21:11:23 +01:00
Rafał Miłecki
3f96e57aed otrx: add support for -A (append) and -a (align) options
They are inspired and compatible with the original and mjn3's trx tool.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-14 22:33:19 +01:00
Rafał Miłecki
6d283b8029 otrx: optimize memory usage when creating TRX image
There is no need to allocate buffer as big as the whole image in order
to calculate CRC32. It's enough to use small buffer and just read file
content block by block.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-14 22:33:19 +01:00
Rafał Miłecki
c6761e7c8e otrx: use helper function when checking image's CRC32
This requires changing this helper to accept initial/current CRC32
value as argument but it allows dropping duplicated (complex?) code
calculating the CRC32.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-14 22:33:19 +01:00
Matt Mets
851644bf5b adb: fix package description
Signed-off-by: Matt Mets <matt@blinkinlabs.com>
2017-10-29 16:16:35 +01:00
Jo-Philipp Wich
d4e7af5278 mdadm: fix parameter quoting
Ensure that path defines are passed quoted to the compiler in order
to avoid cpp syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-27 03:26:37 +02:00
Rosen Penev
8eadec40bd mdadm: Fix config generation
The init script generated something like "DEVICE=/dev/sda" when it should
have been generating "DEVICE /dev/sda". mdadm errors on this. Patch by jow.

Also changed the default sendmail path to /usr/sbin/sendmail. No package
in LEDE provides /sbin/sendmail. msmtp provides /usr/sbin/sendmail so use
that.

Also add a patch to fix file paths for mdadm runtime files. mdadm currently
errors on them since /run is missing. Once /run is added to stock LEDE, this
patch can be removed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-27 02:32:32 +02:00
Hans Dedecker
1cec4d4ef0 busybox: provide "ip"
Let busybox provide "ip" as it supports the ip applets link, address,
route, rule and neighbor

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-10-14 20:23:55 +02:00
Daniel Engberg
c4562a9069 package/utils/f2fs-tools: Update to 1.9.0
Update f2fs-tools to 1.9.0
Remove patch as its been committed upstream

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-09-30 22:43:17 +02:00
Ryan Mounce
6a5a58ed27 util-linux: update to 2.30.2
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2017-09-30 22:41:43 +02:00
Felix Fietkau
e64463ebde util-linux: avoid using the getrandom syscall
getrandom blocks until the random pool is being initialized.
Unfortunately, this code is being called early during init to create the
overlay filesystem, on some devices leaving little chance for a
successful random pool init.
True randomness is not that important here, so fix this issue by
sticking to using /dev/urandom, like in older versions of this code.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-09-29 12:32:44 +02:00
Philip Prindeville
3008fc9a7b usbutils: avoid duplicating the git revision
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-09-20 02:08:09 +02:00
Daniel Engberg
5b1660a538 utils/e2fsprogs: Update to 1.43.6
Update e2fsprogs to 1.43.6
Disable compilation of fuse2fs (we don't package it)
Disable thread support (only affects fuse2fs)
Enable linking with libblkid instead of using private (included) version.
The libblkid is ~210KBytes in size, but with using the shared library
the binaries are ~25KBytes smaller. This also brings it in sync with
most other Linux distributions.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-09-17 00:26:52 +02:00
Magnus Kroken
89f8a01dab busybox: update to 1.27.2
Refresh patches, delete patches backported from upstream.

This fixes ntpd sync issues (ntpd would not sync if the first provided
peer address was unreachable).

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-08-30 22:34:41 +02:00
Daniel Golle
a3c0d5f70a busybox: move passwd applet to /bin
busybox currently installs passwd into /usr/bin which prevents its
'full' shadow-utils variant from being installed.
Move the passwd applet to /bin to avoid that collision.
shadow also provides /usr/bin/login which doesn't collide with busybox
as the busybox login applet is installed at /bin/login.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-08-30 18:12:48 +02:00
Daniel Golle
a63eb74bce busybox: move traceroute applets to /bin
busybox currently installs traceroute and traceroute6 into /usr/bin
which prevents their 'full' iputils variants from being installed.
Move those applets to /bin so they can coexist with their iputils
siblings using the same PATH convention already applied for coreutils
and other drop-in 'full' versions.
Refresh existing patch while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-08-30 18:12:48 +02:00
Stijn Tintel
cdb494fdc2 f2fs-tools: fix mkfs.f2fs on big-endian systems
Fixes: FS#749

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-25 10:19:06 +03:00
Stijn Tintel
252c8ddf14 f2fs-tools: drop musl compat patch
It is no longer needed since version 1.4.1.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-25 10:19:06 +03:00
Stijn Tintel
d87f27af54 f2fs-tools: drop patch in favour of CONFIGURE_VARS
Override the failing check in configure with CONFIGURE_VARS instead of
carrying a patch that's unlikely to be accepted by upstream.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
2017-08-25 10:19:06 +03:00
Philip Prindeville
5c2c0f8a32 util-linux: don't need to build NLS support
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-23 18:36:22 +02:00
Jo-Philipp Wich
4fce22e88f util-linux: add missing dependencies
Commit e505f59bd9 "utils/util-linux: Update to 2.30.1" bumped util-linux
without properly adjusting the dependencies of all applets.

Add missing ncursesw dependencies to sfdisk and dmesg applets to fix
packaging issues.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-08-23 11:34:25 +02:00
Jo-Philipp Wich
0168ba2e07 Revert "busybox: ash/hush fix for read-builtin command"
Revert this commit as it introduces a patchfile at a wrong location.
Since the patch was never effective, we can assume that this particular
commit was not properly tested.

This reverts commit dde9da46c1.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-08-23 10:58:10 +02:00
BangLang Huang
69da83d9f1 nvram: add help message for nvram magic not found
The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
c7e2a6fe92 nvram: improve argument check when program start
print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
2a253e7cdb nvram: add usage() function
Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
BangLang Huang
1948d8e08c nvram: fix memory leak
Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2017-08-22 14:31:32 +02:00
Daniel Engberg
e505f59bd9 utils/util-linux: Update to 2.30.1
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-21 21:29:45 +02:00
Daniel Engberg
10c443728d utils/e2fsprogs: Update to 1.43.5
Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-08-09 23:20:56 +02:00
Matthias Schiffer
a81a082f5b
mtd-utils: use source package name for lzo in PKG_BUILD_DEPENDS
PKG_BUILD_DEPENDS should always refer to source package names.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-07-08 22:51:34 +02:00
Daniel Golle
eb7c14d512 bzip2: add symlink to binary
Other distributions incl. the OpenWrt ImageBuilder and SDK
expect to find the bzip2 executable in /bin.
Create a symlink at that location for compatibility.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-07-05 16:27:40 +02:00
Florian Eckert
4482063c34 treewide: add license tags
Add licence tags where missing.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-06-24 22:36:38 +02:00
Mathias Kresin
7e12863252 fritz_tffs_read: get tffs size from input file
Use the size of the input file as maximum tffs size instead of a fixed
value. The tffs on a AVM Fritz 300E can be up to 512KByte for example.

Fixes a read error for the AVM Fritz 3370 where the tffs partition size
is 64Kbyte and smaller than the former default value of 256KByte.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-24 22:36:38 +02:00
Bastian Bittorf
dde9da46c1 busybox: ash/hush fix for read-builtin command
this is a cherrypick from busybox-git HEAD:
f5470419404d643070db99d058405b714695b817

and can be removed when upgrading to
next busybox release. discussion here:
http://lists.busybox.net/pipermail/busybox/2017-May/085439.html

Signed-off-by: Bastian Bittorf <bb@npl.de>
2017-06-24 13:11:19 +02:00
Stefan Tomanek
de6ff15129 busybox: backport 'ip rule suppress_{prefixlength, ifgroup}'
This is a backport from the busybox repository
(192dce4b84fb32346ebc5194de7daa5da3b8d1b4); it enables the use of the
suppress_{prefixlength,ifgroup} flags for policy routing rules.

Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
2017-06-24 13:11:19 +02:00
Florian Fainelli
5229c45363 mdadm: Do not check RUN_DIR
Fixes build failure on hosts that do not have mdadm
installed/configured:

make[3]: Entering directory
`/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0'
***** Parent of /run/mdadm does not exist.  Maybe set different RUN_DIR=
*****  e.g. make RUN_DIR=/dev/.mdadm
***** or set CHECK_RUN_DIR=0
make[3]: *** [check_rundir] Error 1
make[3]: Leaving directory
`/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0'
make[2]: ***
[/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0/.built]
Error 2
make[2]: Leaving directory
`/local/users/fainelli/openwrt/trunk/package/utils/mdadm'
make[1]: *** [package/utils/mdadm/compile] Error 2
make[1]: Leaving directory `/local/users/fainelli/openwrt/trunk'
make: *** [package/mdadm/compile] Error 2

Fixes: 980c41f8e0 ("utils/mdadm: Update to 4.0")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-05 12:24:01 -07:00