Commit Graph

3964 Commits

Author SHA1 Message Date
Lech Perczak
03692dee73 umbim: restructure IPv4/IPv6 handling
Check whether interface is configured per IP type, not per DHCP. This is
preparation to allow fallback to DHCP if static IP configuration is not
available, which is the default option for MBIM modems

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
c1e0d07744 umbim: inherit firewall zone membership from parent interface
Fix an issue where subinterfaces were not added to the same
firewall zone as their parent.
Inspired by 64bb88841f.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
c84bf89b3a umbim: inherit "peerdns" option from parent interface
MBIM protocol handler should intherit "peerdns" options from parent
interface on sub-interfaces, otherwise upstream DNS servers are applied
regardless of configuration.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
9bb4b9a968 umbim: use IP configuration provided by MBIM by default
Previously, DHCP was used. According to MBIM Specification v1.0 errata 1 [1],
section 10.5.20, MBIM_CID_IP_CONFIGURATION,
if MBIM information element containing IP configuration is available,
host shall use it, and fall back to in-band mechanisms to acquire it therwise -
therefore make static configuration the default.

[1] https://www.usb.org/document-library/mobile-broadband-interface-model-v10-errata-1-and-adopters-agreement

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
356a6f0eee umbim: detect actual connection IP type
Current implementation needlessly creates both IPv4 and IPv6
sub-interfaces for single-stack IP types. Limit this only to selected IP
type. While at that, ensure that IP type is also passed to umbim during
"connect" phase. In addition, detect the actual established connection
type returned by umbim and set up subinterfaces according to that,
not to requested configuration. While at that, allow empty IP type explicitly,
interpreted as "any" according to MBIM specification.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
da84eddedb umbim: fail connect step immediately
Subsequent calls to 'umbim connect' do not have any effect if a failure
occured, and in such case an infinite loop without timeout is created,
leading to possibility of interface stuck at connecting forever.
Drop this loop, and issue MBIM disconnect properly, so netifd can
restart from scratch.
This issue can be observed with Sierra EM7455 at changing APN, which
causes network re-registration by default, and a MBIM transaction
timeout, which is resolved on next interface bringup by netifd.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Lech Perczak
0be14c622b umbim: connect session for only the selected PDP type
Previous implementation automatically set up connections for both IPv4
and IPv6, even if one of them isn't supported. Respect the "pdptype"
option in the same way, as it is done for QMI or NCM, and only start the
respective PDN sessions, if set.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Martin Schiller
512bb17f3e umbim: add support for non-dhcp mode
There are mbim compatible wwan modules available which do not support
the dhcp autoconfiguration. (e.g. gemalto Cinterion ELS81)

This adds the possibility to get the configuration parameters from mbim.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-29 21:33:04 +02:00
Nick Hainke
304423a4ff
hostapd: update to 2023-03-29
Add patches:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch

Remove upstreamed:
- 170-DPP-fix-memleak-of-intro.peer_key.patch
- 461-driver_nl80211-use-new-parameters-during-ibss-join.patch
- 800-acs-don-t-select-indoor-channel-on-outdoor-operation.patch
- 992-openssl-include-rsa.patch

Automatically refreshed:
- 011-mesh-use-deterministic-channel-on-channel-switch.patch
- 021-fix-sta-add-after-previous-connection.patch
- 022-hostapd-fix-use-of-uninitialized-stack-variables.patch
- 030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 050-build_fix.patch
- 110-mbedtls-TLS-crypto-option-initial-port.patch
- 120-mbedtls-fips186_2_prf.patch
- 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
- 150-add-NULL-checks-encountered-during-tests-hwsim.patch
- 160-dpp_pkex-EC-point-mul-w-value-prime.patch
- 200-multicall.patch
- 300-noscan.patch
- 310-rescan_immediately.patch
- 330-nl80211_fix_set_freq.patch
- 341-mesh-ctrl-iface-channel-switch.patch
- 360-ctrl_iface_reload.patch
- 381-hostapd_cli_UNKNOWN-COMMAND.patch
- 390-wpa_ie_cap_workaround.patch
- 410-limit_debug_messages.patch
- 420-indicate-features.patch
- 430-hostapd_cli_ifdef.patch
- 450-scan_wait.patch
- 460-wpa_supplicant-add-new-config-params-to-be-used-with.patch
- 463-add-mcast_rate-to-11s.patch
- 465-hostapd-config-support-random-BSS-color.patch
- 500-lto-jobserver-support.patch
- 590-rrm-wnm-statistics.patch
- 710-vlan_no_bridge.patch
- 720-iface_max_num_sta.patch
- 730-ft_iface.patch
- 750-qos_map_set_without_interworking.patch
- 751-qos_map_ignore_when_unsupported.patch
- 760-dynamic_own_ip.patch
- 761-shared_das_port.patch
- 990-ctrl-make-WNM_AP-functions-dependant-on-CONFIG_AP.patch

Manually refresh:
- 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch
- 301-mesh-noscan.patch
- 340-reload_freq_change.patch
- 350-nl80211_del_beacon_bss.patch
- 370-ap_sta_support.patch
- 380-disable_ctrl_iface_mib.patch
- 464-fix-mesh-obss-check.patch
- 470-survey_data_fallback.patch
- 600-ubus_support.patch
- 700-wifi-reload.patch
- 711-wds_bridge_force.patch
- 740-snoop_iface.patch

Tested-by: Packet Please <pktpls@systemli.org> [Fritzbox 4040 (ipq40xx),
           EAP225-Outdoor (ath79); 802.11s, WPA3 OWE, and WPA3 PSK]
Tested-by: Andrew Sim <andrewsimz@gmail.com> [mediatek/filogic]
Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-04-22 23:18:15 +02:00
Felix Fietkau
10eb3fa35a netifd: update to the latest version
7de5440a520f device: fix segfault when recreating devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17 13:14:43 +02:00
Nick Hainke
36c30bee5e tcpdump: update to 4.99.4
Fixes CVE-2023-1801.

Changelog can be found here:
https://git.tcpdump.org/tcpdump/blob/55bc126b0216cfe409b8d6bd378f65679d136ddf:/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-04-17 15:32:48 +08:00
Christian Marangi
75f7e2d10b
odhcpd: bump to latest git HEAD
40ab806 config: use dedicated link local function to check interface
a84bff2 netlink: add support for getting interface linklocal
2ea065f Revert "config: recheck have_link_local on interface reload if already init"
4b38e6b config: fix feature for enabling service only when interface RUNNING

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-04-04 06:43:23 +02:00
Lech Perczak
90603d443f uqmi: explicitly disconnect IPv6 address family
Some modems (namely, Telit LE910C4) require the IPv6 connection state to
be cleared explicitly, to avoid reporting "no effect" if IPv6
connection is already connected through autoconnect mechanism, or during
LTE default bearer attach, which would lead to established session, but
without a way to inform protocol handler of the status.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-02 18:54:39 +02:00
Lech Perczak
8c445d56f1 uqmi: set IPv6 family explicitly in status check
Some modems require CID to be set explicitly during IPv6 connection
status check, others require IPv6 address family to be checked explicitly
after establishing connection, in order to provide correct status.
Set both fields in the request to satisfy them.

Fixes: c8a88118af ("uqmi: set CID during 'query-data-status' operation")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-04-02 18:54:39 +02:00
Andrey Erokhin
506bb436c6 netifd: strip mask from IP address in DHCP client params
ipaddr option can be in CIDR notation,
but udhcp wants just an IP address

Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
2023-04-01 22:40:35 +02:00
Ian Dall
ed86454578 dnsmasq: configure dynamic dhcp6 and dhcp4 independently
Given ipv6 has SLAAC it is quite plausible to wish to use dynamic
dhcp4 but static dhcp6. This patch keeps dynamicdhcp as the default
option for both, but is overridden by dynamicdhcpv6 or dynamicdhcpv4

Signed-off-by: Ian Dall <ian@beware.dropbear.id.au>
2023-04-01 22:35:13 +02:00
Ruben Jenster
936df715de dnsmasq: add dhcphostsfile to ujail sandbox
The dhcphostsfile must be mounted into the (ujail) sandbox.
The file can not be accessed without this mount.

Signed-off-by: Ruben Jenster <rjenster@gmail.com>
2023-04-01 22:22:49 +02:00
Szabolcs Hubai
dbd6ebd6d8 comgt: ncm: support Mikrotik R11e-LTE6 modem
The Mikrotik R11e-LTE6 modem is similar to ZTE MF286R modem, added
earlier: it has a Marvel chip, able to work in ACM+RNDIS mode, knows ZTE
specific commands, runs OpenWrt Barrier Breaker fork.
While the modem is able to offer IPv6 address, the RNDIS setup is unable
to complete if there is an IPv6 adress.

While it works in ACM+RNDIS mode, the user experience isn't as good as
with "proto 3g": the modem happily serves a local IP (192.168.1.xxx)
without internet access. Of course, if the modem has enough time
(for example at the second dialup), it will serve a public IP.

Modifing the DHCP Lease (to a short interval before connect and back to
default while finalizing) is a workaround to get a public IP at the
first try.

A safe workaround for this is to excercise an offline script of the
pingcheck program: simply restart (ifdown - ifup) the connection.

Another pitfall is that the modem writes a few messages at startup,
which confuses the manufacturer detection algorithm and got disabled.

    daemon.notice netifd: Interface 'mikrotik' is setting up now
    daemon.notice netifd: mikrotik (2366): Failed to parse message data
    daemon.notice netifd: mikrotik (2366): WARNING: Variable 'ok' does not exist or is not an array/object
    daemon.notice netifd: mikrotik (2366): Unsupported modem
    daemon.notice netifd: mikrotik (2426): Stopping network mikrotik
    daemon.notice netifd: mikrotik (2426): Failed to parse message data
    daemon.notice netifd: mikrotik (2426): WARNING: Variable '*simdetec:1,sim' does not exist or is not an array/object
    daemon.notice netifd: mikrotik (2426): Unsupported modem
    daemon.notice netifd: Interface 'mikrotik' is now down

A workaround for this is to use the "delay" option in the interface
configuration.

I want to thank Forum members dchard (in topic Adding support for
MikroTik hAP ac3 LTE6 kit (D53GR_5HacD2HnD)) [1]
and mrhaav (in topic OpenWrt X86_64 + Mikrotik R11e-LTE6) [2]
for sharing their experiments and works.
Another information page was found at eko.one.pl [3].

[1]: https://forum.openwrt.org/t/137555
[2]: https://forum.openwrt.org/t/151743
[3]: https://eko.one.pl/?p=modem-r11elte

Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
2023-03-29 17:29:02 +02:00
Szabolcs Hubai
91eca7b04f comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6
The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup
and the radio is off (*RADIOPOWER: 0):

    AT+RESET
    OK

    OK

    *SIMDETEC:2,NOS

    *SIMDETEC:1,SIM

    *ICCID: 8936500119010596302

    *EUICC: 1

    +MSTK: 11, D025....74F3

    *ADMINDATA: 0, 2, 0

    +CPIN: READY

    *EUICC: 1

    *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911

    +CREG: 0

    $CREG: 0

    +CESQ: 99,99,255,255,255,255

    *CESQ: 99,99,255,255,255,255,0

    +CGREG: 0

    +CEREG: 0

    +CESQ: 99,99,255,255,255,255

    *CESQ: 99,99,255,255,255,255,0

    *RADIOPOWER: 0

    +MMSG: 0, 0

    +MMSG: 0, 0

    +MMSG: 1, 0

    +MPBK: 1

While the chat script is able to establish the PPP connection,
it's closed instantly by the modem: LCP terminated by peer.

    local2.info chat[7000]: send (ATD*99***1#^M)
    local2.info chat[7000]: expect (CONNECT)
    local2.info chat[7000]: ^M
    local2.info chat[7000]: ATD*99***1#^M^M
    local2.info chat[7000]: CONNECT
    local2.info chat[7000]:  -- got it
    local2.info chat[7000]: send ( ^M)
    daemon.info pppd[6997]: Serial connection established.
    kern.info kernel: [  453.659146] 3g-mikrotik: renamed from ppp0
    daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik
    daemon.info pppd[6997]: Using interface 3g-mikrotik
    daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0
    daemon.info pppd[6997]: LCP terminated by peer
    daemon.notice pppd[6997]: Connection terminated.
    daemon.notice pppd[6997]: Modem hangup
    daemon.info pppd[6997]: Exit.
    daemon.notice netifd: Interface 'mikrotik' is now down

Sending "AT+CFUN=1" to modem deactivates the flight mode and
solves the issue:

    daemon.notice netifd: Interface 'mikrotik' is setting up now
    daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1
    daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0
    local2.info chat[7140]: abort on (BUSY)
    local2.info chat[7140]: abort on (NO CARRIER)
    local2.info chat[7140]: abort on (ERROR)
    local2.info chat[7140]: report (CONNECT)
    local2.info chat[7140]: timeout set to 10 seconds
    local2.info chat[7140]: send (AT&F^M)
    local2.info chat[7140]: expect (OK)
    local2.info chat[7140]: ^M
    local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M
    local2.info chat[7140]: ^M
    local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M
    local2.info chat[7140]: AT&F^MAT&F^M^M
    local2.info chat[7140]: OK
    local2.info chat[7140]:  -- got it
    ...
    local2.info chat[7140]: send (ATD*99***1#^M)
    local2.info chat[7140]: expect (CONNECT)
    local2.info chat[7140]: ^M
    local2.info chat[7140]: ATD*99***1#^M^M
    local2.info chat[7140]: CONNECT
    local2.info chat[7140]:  -- got it
    local2.info chat[7140]: send ( ^M)
    daemon.info pppd[7137]: Serial connection established.
    kern.info kernel: [  463.094254] 3g-mikrotik: renamed from ppp0
    daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik
    daemon.info pppd[7137]: Using interface 3g-mikrotik
    daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0
    daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64
    daemon.notice pppd[7137]: local  IP address 100.112.63.62
    daemon.notice pppd[7137]: remote IP address 10.64.64.64
    daemon.notice pppd[7137]: primary   DNS address 185.29.83.64
    daemon.notice pppd[7137]: secondary DNS address 185.62.131.64
    daemon.notice netifd: Network device '3g-mikrotik' link is up
    daemon.notice netifd: Interface 'mikrotik' is now up

To send this AT command to the modem the "runcommand.gcom" script
dependency is moved from comgt-ncm to comgt.
As the comgt-ncm package depends on comgt already, this change
is a NOOP from that point of view.
But from the modem's point it is a low hanging fruit as the modem
is usable with installing comgt and kmod-usb-ncm packages.

Signed-off-by: Szabolcs Hubai <szab.hu@gmail.com>
2023-03-29 17:29:02 +02:00
Mike Wilson
8f27093ce7 ncm: add error check and retry mechanism for gcom call
This patch solves the problem of receiving "error" responses when
initially calling gcom. This avoids unnecessary NO_DEVICE failures.

A retry loop retries the call after an "error" response within the
specified delay. A successful response will continue with the connection
immediately without waiting for max specified delay, bringing the
interface up sooner.

Signed-off-by: Mike Wilson <mikewse@hotmail.com>
2023-03-28 14:19:33 +02:00
Felix Fietkau
66f0878633 firewall4: update to the latest version
39e8c70957c7 fw4: fix handling the ipset "comment" option
e6e82a55206c fw4: add further symbolic ICMP type declarations
ce9a37829a76 tests: add testcase for automatic includes
30ee17a9c65d fw4: fix syntax errors in ICMP type declarations
1ecfadd52291 fw4: remove accidentally committed .orig and .rej file
04a06bd70b98 fw4: enable flowtable counters

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-24 10:15:23 +01:00
Christian Marangi
eeaa71a3de
odhcpd: bump to latest git HEAD
29c934d config: recheck have_link_local on interface reload if already init

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-03-24 02:01:07 +01:00
Christian Marangi
d2fc620d0a
odhcpd: bump to latest git HEAD
7c0f603 router: skip RA and wait for LINK-LOCAL to be assigned
ba30afc config: skip interface setup if interface not IFF_RUNNING
06b111e Revert "odhcpd: Reduce error messages"
90d6cc9 odhcpd: Reduce error messages

Also drop AUTORELEASE since it got deprecated.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-03-22 06:39:51 +01:00
Andre Heider
07730ff346
treewide: add support for "lto" in PKG_BUILD_FLAGS
This reduces open coding and allows to easily add a knob to enable
it treewide, where chosen packages can still opt-out via "no-lto".

Some packages used LTO, but not the linker plugin. This unifies 'em
all to attempt to produce better code.
Quoting man gcc(1):
"This improves the quality of optimization by exposing more code to the
link-time optimizer."

Also use -flto=auto instead of -flto=jobserver, as it's not guaranteed
that every buildsystem uses +$(MAKE) correctly.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Andre Heider
da3700988d
treewide: add support for "gc-sections" in PKG_BUILD_FLAGS
This reduces open coding and allows to easily add a knob to
enable it treewide, where chosen packages can still opt-out via
"no-gc-sections".

Note: libnl, mbedtls and opkg only used the CFLAGS part without the
LDFLAGS counterpart. That doesn't help at all if the goal is to produce
smaller binaries. I consider that an accident, and this fixes it.

Note: there are also packages using only the LDFLAGS part. I didn't
touch those, as gc might have been disabled via CFLAGS intentionally.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Andre Heider
5c545bdb36
treewide: replace PKG_USE_MIPS16:=0 with PKG_BUILD_FLAGS:=no-mips16
Keep backwards compatibility via PKG_USE_MIPS16 for now, as this is
used in all package feeds.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-03-21 18:28:22 +01:00
Nick Hainke
ab514c28a8 nftables: update to 1.0.7
Release Notes:
https://marc.info/?l=netfilter-devel&m=167873533214563&w=2

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-03-19 17:00:45 +01:00
Mark Mentovai
8dea8bde2a
odhcp6c: add "verbose" option
odhcp6c logs messages related to its activity when invoked with -v, but
there is no way to configure this from within OpenWrt. This adds a UCI
option to turn on odhcp6c logging, disabled by default. To enable, set,
for example, network.wan6.verbose = 1.

Signed-off-by: Mark Mentovai <mark@mentovai.com>
2023-03-14 22:47:34 +01:00
Felix Fietkau
9d8374cadc qosify: update to the latest version
ca4509cf84d2 bpf: switch to using bpf_skb_utils.h
d064439009d0 qosify-bpf: skip unnecessary flow lookups
9c625ae96f2d map: fix deleting port based rules
9a47ea4b683d map: fix return code check for bpf_map_get_next_key calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 21:53:37 +01:00
Felix Fietkau
635d177ac9 hostapd: enable radius server support
This is useful in combination with the built-in eap server support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Felix Fietkau
cf992ca862 hostapd: add missing return code for the bss_mgmt_enable ubus method
Fixes bogus errors on ubus calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Felix Fietkau
d10e1b4a71 hostapd: add support for defining multiple acct/auth servers
This allows adding backup servers, in case the primary ones fail.
Assume that port and shared secret are going to be the same.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-07 10:24:05 +01:00
Hauke Mehrtens
a03076cc39 binutils: Update to version 2.40
binutils 2.39: https://lists.gnu.org/archive/html/info-gnu/2022-08/msg00002.html
binutils 2.40: https://lists.gnu.org/archive/html/info-gnu/2023-01/msg00003.html

This version includes a new libsframe.so library, pack it into the
libbfd package as it is used by this library. Also deactivate some
optional configuration options for now.

An extra patch to fix compile problem in AARCH64 is added.
gprofng needs a C++ standard library, deactivate it for now.

Activate feature-disassembler-init-styled in bpftools too to fix
compilation with the updated binutils.

An bpftool version 7.0 or later is needed for binutils 2.39 and later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-03-05 19:23:42 +01:00
Hauke Mehrtens
26a65e852c bpftool: Update to version 7.1.0
bpftool changelog: https://github.com/libbpf/bpftool/releases
libbpf changelog: https://github.com/libbpf/libbpf/releases

This updates the bfptool to version 7.1.0. This also includes an update
of the libbpf to version 1.1.

This also adds some new feature options and removes some old ones which
were also removed form the source code. zlib for example is now
mandatory.

Add -flto also to LD flags to make it really work.

Before this change bpftool was on a git commit between version 6.7 and
6.8 and libbpf was on a commit between version 0.7 and 0.8.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-03-05 19:23:42 +01:00
Kevin Darbyshire-Bryant
c9df2d5c64 dnsmasq: bump to v2.89
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2023-02-25 20:49:47 +00:00
Hauke Mehrtens
2a104365dc netifd: update to the latest version
ed65a00 netifd: bridge: Fix format string position
19372d8 netifd: Fix multiple -Wsign-compare warnings
8ebf033 netifd: Do not return values in void function
c77417a netifd: Explicitly zero initialize variables
463a120 netifd: Activate -Wextra compile warnings

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-02-25 19:57:47 +01:00
Nick Hainke
638ebd3067 iproute2: update to 6.2
Release Notes:
https://lwn.net/Articles/923952/

Refresh patches:
- 110-darwin_fixes.patch
- 115-add-config-xtlibdir.patch
- 140-allow_pfifo_fast.patch
- 140-keep_libmnl_optional.patch
- 145-keep_libelf_optional.patch
- 150-keep_libcap_optional.patch
- 155-keep_tirpc_optional.patch
- 170-ip_tiny.patch
- 175-reduce-dynamic-syms.patch
- 180-drop_FAILED_POLICY.patch
- 190-fix-nls-rpath-link.patch
- 195-build_variant_ip_tc.patch
- 200-drop_libbsd_dependency.patch
- 300-selinux-configurable.patch

Remove upstreamed:
- 320-configure-Remove-include-sys-stat.h.patch

While working on it remove AUTORELEASE.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-02-25 13:32:35 +01:00
Nick Hainke
c98a202446 ethtool: update to 6.2
Release notes:
- Feature: link down event statistics (no option)
- Feature: JSON output for coalesce (-c)
- Feature: new link modes (no option)
- Feature: JSON output for ring (-g)
- Feature: netlink handler for RSS get (-x)
- Fix: fix boolean value output in JSON output
- Fix: fix build errors and warnings

Remove upstreamed patches:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-02-25 13:29:07 +01:00
Leon M. Busch-George
ae751535de
hostapd: always use sae_password for mesh/SAE auth
This patch fixes a corner case when using passwords that are exactly 64
characters in length with mesh mode or passwords longer than 63 characters
with SAE because 'psk' is used instead of 'sae_password'.
SAE is obligatory for 802.11s (mesh point).

The 'psk' option for hostapd is suited for WPA2 and enforces length
restrictions on passwords. Values of 64 characters are treated as PMKs.
With SAE, PMKs are always generated during the handshake and there are no
length restrictions.
The 'sae_password' option is more suited for SAE and should be used
instead.

Before this patch, the 'sae_password' option is only used with mesh mode
passwords that are not 64 characters long.
As a consequence:
- mesh passwords can't be 64 characters in length
- SAE only works with passwords with lengths >8 and <=63 (due to psk
  limitation).

Fix this by always using 'sae_password' with SAE/mesh and applying the PMK
differentiation only when PSK is used.

Fixes: #11324
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-02-19 19:43:57 +01:00
Leon M. Busch-George
3c10c42ddd
hostapd: add quotes in assignments
It's generally advised to use quotes for variable assignments in bash.

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-02-19 19:43:54 +01:00
Andre Heider
78dc8e2b13 wireguard-tools: remove unnecessary .mk includes
Including kernel.mk moves the package build folder in the linux one, which
is confusing since this isn't building any kernel modules.

package-defaults.mk is already included my package.mk.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-02-18 19:59:12 +01:00
Stijn Tintel
65c9b5ffb0 odhcpd: bump to git HEAD
dfab0fa dhcpv4: detect noarp interfaces
  5a17751 router: improve RA logging
  edc5e17 router: always check ra_default

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2023-02-17 16:30:03 +02:00
Rafał Miłecki
3c66ac7e22 iptables: iptables-mod-conntrack-extra: don't select kmod-ipt-raw
Package kmod-ipt-raw enables CONFIG_IP_NF_RAW and packages
iptable_raw.ko

According to kernel's net/netfilter/Kconfig there are only 3 kernel
symbols that depend on the IP_NF_RAW:
1. NETFILTER_XT_TARGET_CT (xt_CT.ko)
2. NETFILTER_XT_TARGET_NOTRACK (unused symbol?!)
3. NETFILTER_XT_TARGET_TRACE (xt_TRACE.ko)

Now: iptables-mod-conntrack-extra selects kmod-ipt-conntrack-extra which
provides: xt_helper.ko nf_conncount.ko xt_connlimit.ko xt_connmark.ko
xt_recent.ko and xt_connbytes.ko (none of them seems to require
iptable_raw.ko).

It seems there is no explicit reason for iptables-mod-conntrack-extra to
require kmod-ipt-raw (iptables_raw.ko).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-02-15 14:28:08 +01:00
Rafał Miłecki
601257e388 netifd: refactor packet steering init
1. Move setup code to independent script file
2. Add init.d script to allow automatic updates
3. Support platform specific /usr/libexec/platform/packet-steering.sh

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-02-15 14:25:38 +01:00
Leon M. George
e4bd3de1be
dnsmasq: refuse to add empty DHCP range
Use ipcalc's return value to react to invalid range specifications.
By simply ignoring the range instead of aborting with an error code,
dnsmasq should still start when there's an error (best effort).
Aborting the config generation or working with invalid range specs leaves
dnsmasq crash-looping which is the right thing to do concerning that
particular interface but it also hinders DHCP service on other interfaces
and DNS on the router itself.

Signed-off-by: Leon M. George <leon@georgemail.eu>
2023-02-07 21:05:57 +01:00
Christian Marangi
f28a604df4
iwinfo: bump to latest git HEAD
c7eb8eb nl80211: restore iterating over all devices in nl80211_phy2ifname()

Fixes: #11902
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-02-06 21:36:51 +01:00
Jan Hoffmann
b91d7d9d78 ltq-*-app: extend ubus metrics/statistics
Expose a few additional useful values via ubus:

- Channel error counters (CRC, FEC)
- Retransmission counters (MINEFTR, LEFTRS)
- Impulse noise protection level
- Rate adaptation mode
- OLR statistics (Bitswap, SRA, SOS)
- Pilot tones
- Upstream/downstream band information

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
2023-02-03 13:40:47 +01:00
Felix Fietkau
83d3e255f1 bridger: update to the latest version
8be8bb9df789 nl: fix accessing hairpin mode and isolated from the right attribute set

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-01-29 10:08:21 +01:00
Andre Heider
9902c8520b uhttpd: clean up Makefile
uhttpd's cmake options all default to ON. Either we set all of them or
none if the defaults need to be changed. Let's go with the latter.

Because support for all modules is always compiled in, remove two unused
and useless config toggles.

uhttpd detects and uses libcrypt itself, no need to add it here again.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-28 22:37:35 +01:00
Nick Hainke
364a9be338 ethtool: update to 6.1
Release notes:
https://lore.kernel.org/netdev/20221219225600.r54vejiqapn266cm@lion.mk-sys.cz/T/

Add patches fixing compilation:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-28 20:26:22 +01:00
Hauke Mehrtens
015c108755 relayd: bump to version 2023-01-28
f646ba4 route: Fix compile warning with glibc

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-28 20:24:22 +01:00
Hauke Mehrtens
d14559e9df uhttpd: update to latest Git HEAD
47561aa mimetypes: add audio/video support for apple airplay
6341357 ucode: respect all arguments passed to send()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-28 19:31:42 +01:00
Nick Hainke
d68a73a025 tcpdump: update to 4.99.3
Changes:
https://git.tcpdump.org/tcpdump/blob/032e4923e5202ea4d5a6d1cead83ed1927135874:/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-26 00:17:59 +01:00
Christian Marangi
b61404a6ad
rssileds: bump PKG_RELEASE due to libiwinfo ABI change
Bump PKG_RELEASE due to libiwinfo ABI change to trigger a package
rebuild.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-23 13:55:42 +01:00
Christian Marangi
57586ddd71
iwinfo: update to latest Git HEAD
1e4e709 iwinfo: readd missing define for IWINFO_AUTH in header

Fixes: #11860
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-23 13:54:13 +01:00
Hannu Nyman
a57796b137
dnsmasq: set an increased cachesize default value
Dnsmasq DNS cache size is only 150 by default.
Set the uci default value to 1000, so that cache gets used more
and unnecessary DNS queries to upstream can be avoided.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2023-01-21 11:13:44 +01:00
Christian Marangi
f3d8de7398
iwinfo: update to latest Git HEAD
Bump ABI to 20230121 due to struct changes

f766138 cli: print the flags on the frequency list
8ee7971 lib: add IWINFO_FREQ_FLAG_NAMES
81184d2 nl80211: fix some comments
2c4ee84 nl80211: prefer non-supplicant-based devices
6194aaf nl80211: simplify iterating over phy's devices
acbf4fe nl80211: remove redundant check in nl80211_phy2ifname()
0172c97 cli: print the frequency and band on the scan list
bbe424f cli: print the band on the frequency list
afa147c nl80211: add "mhz" and "band" to iwinfo_scanlist_entry
0d5ea34 nl80211: add "band" to iwinfo_freqlist_entry
dba0f06 nl80211: add support for radiation and indoor chan restriction
7e3d7de iwinfo: reorganize iwinfo header to enum and defines
9b47b03 devices: add USB devices supported by the mt76 driver
c0fda7c utils: skip comment lines when parsing devices.txt
dbc0ee7 cli: describe USB devices as such
891acee devices: add MediaTek MT7628 card
fac0787 devices: add support for declaring compatible matched devices

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-21 01:23:22 +01:00
Nick Hainke
a04bbbbea4 ipset: update to 7.17
Release notes:
https://lwn.net/Articles/918784/

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-17 23:14:46 +01:00
Martin Schiller
6e4c9738be ltq-vdsl-vr11-app: add version 4.23.1 for vr11 targets
This uses version 4.23.1 of the dsl_cpe_control package from the Intel
UGW 8.5.2.10 for the VRX518.

Signed-off-by: Martin Schiller <ms.3headeddevs@gmail.com>
[rebased]
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
[update to 4.23.1, added Jan's vector mac patch, fix warnings,
 switch to tag tarball]
Signed-off-by: Andre Heider <a.heider@gmail.com>
[add missing nLine in autoboot script, fix disconnect on termination,
 remove unneeded VR9 leftovers in init script]
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-16 23:41:41 +00:00
Andre Heider
6361eb47cd ltq-dsl-base: enable for ipq40xx
This is required by the DSL userland tool for hotplug support.

Signed-off-by: Andre Heider <a.heider@gmail.com>
2023-01-16 23:41:41 +00:00
Christian Marangi
d9aa41dcda
lldpd: use release tar instead of codeload
There is currently a problem with making reproducible version of lldpd.
The tool version is generated based on 3 source:
1. .dist-version file in release tar
2. git hash with presence of .git directory
3. current date

Using the codeload tar from github results in getting the repo without
the .git directory and since they are not release tar, we don't have
.dist-version. This results in having lldpd bin with a version set to
the current build time.

Switch to release tar so that we correctly have a .dist-version file and
the version is not based on the build time.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-01-12 14:55:07 +01:00
Christian Marangi
ee397759b6
iwinfo: update to latest Git HEAD
c7b420a devices: add Qualcomm Atheros QCN6024/9024/9074 cards
5914d71 iwinfo: devices: add Qualcomm Atheros IPQ8074 WiSoC

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2023-01-10 00:54:31 +01:00
Hauke Mehrtens
dc12c76dc5 uqmi: Ignore wrong maybe-uninitialized and dangling-pointer error
GCC 12.2.0 shows this false positive error message:
````
uqmi-2022-05-04-56cb2d40/dev.c: In function 'qmi_request_wait':
uqmi-2022-05-04-56cb2d40/dev.c:217:23: error: storing the address of local variable 'complete' in '*req.complete' [-Werror=dangling-pointer=]
  217 |         req->complete = &complete;
      |         ~~~~~~~~~~~~~~^~~~~~~~~~~
uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'complete' declared here
  208 |         bool complete = false;
      |              ^~~~~~~~
uqmi-2022-05-04-56cb2d40/dev.c:208:14: note: 'req' declared here
cc1: all warnings being treated as errors
````

and this one:
````
In file included from uqmi-2022-05-04-56cb2d40/commands.c:28:
In function 'blobmsg_close_table',
    inlined from 'cmd_nas_get_cell_location_info_cb' at /home/haukeuqmi-2022-05-04-56cb2d40/commands-nas.c:897:4:
/usr/include/libubox/blobmsg.h:256:9: error: 'c' may be used uninitialized [-Werror=maybe-uninitialized]
  256 |         blob_nest_end(buf, cookie);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from uqmi-2022-05-04-56cb2d40/commands.c:169:
uqmi-2022-05-04-56cb2d40/commands-nas.c: In function 'cmd_nas_get_cell_location_info_cb':
uqmi-2022-05-04-56cb2d40/commands-nas.c:713:15: note: 'c' was declared here
  713 |         void *c, *t, *cell, *freq;
      |               ^
cc1: all warnings being treated as errors
````

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-09 00:10:52 +01:00
Nick Hainke
5809fb4546 tcpdump: update to 4.99.2
Update to latest version. For release information look into CHANGES
file [0].

Automatically refreshed:
- 001-remove_pcap_debug.patch

Manually refreshed:
- 100-tcpdump_mini.patch

old ipkg sizes:
316554 bin/packages/mips_24kc/base/tcpdump_4.99.1-1_mips_24kc.ipk
141457 bin/packages/mips_24kc/base/tcpdump-mini_4.99.1-1_mips_24kc.ipk

new ipkg sizes:
318089 bin/packages/mips_24kc/base/tcpdump_4.99.2-1_mips_24kc.ipk
141941 bin/packages/mips_24kc/base/tcpdump-mini_4.99.2-1_mips_24kc.ipk

[0] - https://github.com/the-tcpdump-group/tcpdump/blob/master/CHANGES

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-06 16:22:28 +01:00
Nick Hainke
b331ffe807 nftables: update to 1.0.6
Remove upstreamed patches:
- 0001-fix-nft.patch

Upstream switched to "tar.xz" archives.

old ipkg size:
273678 bin/packages/mips_24kc/base/nftables-json_1.0.5-2_mips_24kc.ipk

new ipkg size:
271624 bin/packages/mips_24kc/base/nftables-json_1.0.6-1_mips_24kc.ipk

Release Information:
https://netfilter.org/projects/nftables/files/changes-nftables-1.0.6.txt

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-01-06 16:14:45 +01:00
Felix Fietkau
4455ed65c6 bridger: update to the latest version
def7755c459d add missing copyright headers
f68307fd96d7 add hairpin mode support
9ee8f433ba4e nl: do not pass NDA_VLAN with vid=0
978c1f9eed07 add support for the bridge port isolated flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-01-03 13:28:47 +01:00
Hauke Mehrtens
ee47a28cec treewide: Trigger reinstall of all wolfssl dependencies
The ABI of the wolfssl library changed a bit between version 5.5.3 and
5.5.4. This release update will trigger a rebuild of all packages which
are using wolfssl to make sure they are adapted to the new ABI.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-01-01 21:06:54 +01:00
Felix Fietkau
2e61469a6c netifd: update to the latest version
2cffe0c44e62 treewide: correctly apply IFNAMSIZ limit
96bcbb2e4eb6 wireless: allow set_retry ubus notify command to trigger a wdev restart
a2e8cd75dbf6 wireless: add support for disabling multicast-to-unicast per virtual interface
e9f44189ade7 system: move netdev types to system-linux.c where they are used
a3fab0119ef1 utils: include utils.h last
7ce73fc16765 vlandev: propagate topology changes
81c1fbcba2f2 device: fix vlan device issues with disappearing lower devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-30 16:42:57 +01:00
Hauke Mehrtens
f12bad6c19 tree-wide: Do not use package librt and libpthread
The libraries libpthread, libdl, libutil, libanl have been integrated
into the libc library in version 2.34. it is not needed to explicitly
link them any more.

Most of the functions have been moved from the librt.so into libc.so
some time ago already.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-29 18:50:24 +01:00
Felix Fietkau
090ad03343 hostapd: allow sharing the incoming DAS port across multiple interfaces
Use the NAS identifier to find the right receiver context on incoming messages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-27 19:10:04 +01:00
Hauke Mehrtens
fb15cb4ce9 iproute2: Fix build with GCC 12 and glibc 2.36
This fixes the detection of name_to_handle_at() when GCC 12 and glibc
2.36 are used.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-26 15:18:08 +01:00
Hauke Mehrtens
73dca49f35 uhttpd: update to latest Git HEAD
2397755 client: fix incorrectly emitting HTTP 413 for certain content lengths

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-12-26 15:18:08 +01:00
Kevin Darbyshire-Bryant
5c7e4a9d2e dnsmasq: bump to v2.88
Most relevant feature for openwrt in this release, supports dynamically
removing hosts from 'hostsdir' supplied host files.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-12-25 15:07:36 +00:00
Daniel Golle
6675a9aaf4 xdp-tools: update to version 1.2.9
Changes since v1.2.8:
 32aaf32 libxdp: Fix incorrect rx_ring_setup_done
 6049671 headers: add bpf_endian.h for parsing_helpers.h
 2682c1c export-man: Ignore errors when executing git shell command
 8afda7a xdp-loader/README: Mention lack of support for HW mode in most cards
 dc69919 libxdp: fix prog_fd checks for fd >= 0
 3d7c22a libxdp: Allow falling back to single-program attachment for loaded programs
 af00429 libxdp: Fix check in xdp_program__attach_single()
 41703d2 libxdp: Make sure to set the the program autoload when loading a program
 b1fd2e5 test-xdpdump: Only run tshark attribute test on newer versions of tshark
 5dfe342 libxdp: Convert xdp-dispatcher to use strict section names
 929a22e configure: Try to auto-detect versioned clang binaries
 074fcfb libxdp: Check program name when determining if a program is a dispatcher
 e13a191 Bump TOOLS_VERSION to 1.2.9

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-12-20 13:57:34 +00:00
Rosen Penev
6d1df35747 hostapd: add mbedtls variant
This adds the current WIP mbedtls patches for hostapd. The motivation
here is to reduce size.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-19 12:27:35 +00:00
Nick Hainke
8ed53e0928 iproute2: update to 6.1.0
Announcement:
https://lore.kernel.org/netdev/20221214094130.7b11ec2e@hermes.local/T/#t

Refresh patch:
- 170-ip_tiny.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-12-18 16:33:16 +01:00
Felix Fietkau
581f2b15b2 hostapd: enable coredumps
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Felix Fietkau
c2fde432b3 hostapd: always set a default for the nas identifier
It is used for both 802.11r and WPA enterprise.
Setting it when not needed is harmless

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Felix Fietkau
2fb38b77a2 hostapd: add support for automatically setting RADIUS own-ip dynamically
Some servers use the NAS-IP-Address attribute as a destination address

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-16 14:32:47 +01:00
Jo-Philipp Wich
4a4d0bf78d iwinfo: update to latest Git HEAD
8d15809 cli: print current HT mode
8f86dd6 cli: use IWINFO_HTMODE_COUNT
f36b72b cli: use IWINFO_KMGMT_NAMES
91be7e0 cli: use IWINFO_CIPHER_NAMES
49b6ec9 cli: fix printing the scan channel width
b1c8873 cli: fix marking the active channel
9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers
e084781 utils: add helper functions to get names by values
d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers
8752977 utils: add and use iwinfo_format_hwmodes()
02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES
1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES
aefd0ef lib: use common IWINFO_CIPHER_NAMES strings
a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES
9f29e79 lib: constify and fixup the string array definitions
fddc015 nl80211: mark frequencies where HE operation in not allowed
6d50a7c nl80211: add support for HE htmodes
4ba5713 nl80211: properly get available bands for the hwmode
91b2ada nl80211: update the kernel header nl80211.h
3f619a5 nl80211: fix frequency/channel conversion for the 6G band
a77d915 nl80211: don't guess if a name is an ifname
c27ce71 devices: add usb device MediaTek MT7921AU
14f864e nl80211: add ability to describe USB devices
a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path
dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions
d638163 fix -Wdangling-else warnings
4aa6c5a fix -Wreturn-type warning
3112726 fix -Wpointer-sign warning
ebd5f84 fix -Wmaybe-uninitialized warning
5469898 fix -Wunused-variable warnings
462b679 fix -Wduplicate-decl-specifier warnings
ccaabb4 fix -Wformat-truncation warnings
50380db enable useful compiler warnings via -Wall

Fixes: https://github.com/openwrt/openwrt/issues/10158
Fixes: https://github.com/openwrt/openwrt/issues/10687
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-16 00:55:51 +01:00
Andre Heider
7c63295bf4 treewide: remove DRIVER_11N_SUPPORT
hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years
ago, 80.211n/HT is always included since then.

Noticed because `hostapd -v11n` confusingly returned an error.

See hostapd's commit:
f3bcd69603 "Remove CONFIG_IEEE80211N build option"

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Andre Heider
2d36f60d88 hostapd: fix 350-nl80211_del_beacon_bss.patch
Pass the expected struct:

../src/drivers/driver_nl80211.c: In function 'wpa_driver_nl80211_del_beacon':
../src/drivers/driver_nl80211.c:2945:31: warning: passing argument 1 of 'nl80211_bss_msg' from incompatible pointer type [-Wincompatible-pointer-types]
 2945 |         msg = nl80211_bss_msg(drv, 0, NL80211_CMD_DEL_BEACON);
      |                               ^~~
      |                               |
      |                               struct wpa_driver_nl80211_data *
../src/drivers/driver_nl80211.c:695:50: note: expected 'struct i802_bss *' but argument is of type 'struct wpa_driver_nl80211_data *'
  695 | struct nl_msg * nl80211_bss_msg(struct i802_bss *bss, int flags, uint8_t cmd)
      |                                 ~~~~~~~~~~~~~~~~~^~~

Fixes: 35ff1affe8 "hostapd: update to 2022-05-08"
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Andre Heider
3bc060440a hostapd: remove an unused function from ubus.c
eee80211_frequency_to_channel() isn't used anymore, which is a leftover from:
2a31e9ca97 "hostapd: add op-class to get_status output"

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-12-13 10:54:50 +01:00
Julio Gonzalez Gil
840ce0a65b umbim: Allow roaming and partner connections
Allow registration if the SIM is roaming or partner mode, by adding two
new options to the protocol.

Until now, such registration failed because umbim returns exit codes 4 and
5 for such situations.

Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es>
2022-12-11 03:24:45 +01:00
Felix Fietkau
8d90b9fef1 mac80211: update to linux 6.1-rc8
This should help stay in sync with upstream development

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-10 15:15:19 +01:00
Felix Fietkau
a797f0e82a hostapd: use wpa_supplicant for unencrypted mesh connections
It's more reliable than using iw

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-10 12:38:46 +01:00
Jan-Niklas Burfeind
13f82ce264 comgt-ncm: add support for quectel modem EC200T-EU
context_type is an integer mapping of pdptype:
1: IPV4
2: IPV6
3: IPV4V6

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2022-12-07 12:30:39 +01:00
Jo-Philipp Wich
f1f3d19387 firewall4: add missing PKG_MIRROR_HASH
Fixes: 84183f0d98 ("firewall4: update to latest Git HEAD")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-07 08:54:56 +01:00
Jo-Philipp Wich
84183f0d98 firewall4: update to latest Git HEAD
700a925 fw4: prevent null access when no ipsets are defined
6443ec7 config: drop input traffic by default
119ee1a ruleset: drop ctstate invalid traffic for masq-enabled zones

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-12-06 11:43:06 +01:00
Daniel Golle
aa12a0fdd1
dnsmasq: add option to expose additional paths to jail
Add new UCI list 'addn_mount' allowing the expose additional filesystem
paths to the jailed dnsmasq process. This is useful e.g. in case of
manually configured includes to the configuration file or symlinks
pointing outside of the exposed paths as used by e.g. the safe-search
package in the packages feed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-11-27 14:06:08 +00:00
Nick Hainke
68714f2135 ipset: update to 7.16
Release Notes:
https://lore.kernel.org/netfilter-devel/d65fe5d8-d5ea-ef7-102d-aa1d15bb4d69@netfilter.org/T/#u

Patch "0001-lib-ipset-fix-printf-warning.patch" replaced upstream by:
http://git.netfilter.org/ipset/commit/?id=e39e3466d2d38cdfe83447f391b550e607bc3ce8

Remove upstreamed:
- 0002-Fix-IPv6-sets-nftables-translation.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-27 12:58:33 +01:00
Nick Hainke
c17b6343f3 lldpd: update to 1.0.16
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.16

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-18 20:27:52 +01:00
Chen Minqiang
4979d16fb1 dnsmasq: add support for filter-AAAA/A
This add --filter-A and --filter-AAAA options, to remove IPv4 or IPv6
addresses from DNS answers. these options is supported since version 2.87.

Co-authored-by: NueXini <nuexini@alumni.tongji.edu.cn>
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2022-11-12 17:05:13 +01:00
Felix Fietkau
ddf736e543 hostapd: remove invalid dtim_period option processing
dtim_period is a bss property, not a device one.
It is already handled properly in mac80211.sh

Fixes: 30c64825c7 ("hostapd: add dtim_period, local_pwr_constraint, spectrum_mgmt_required")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-10 13:09:18 +01:00
Kevin Darbyshire-Bryant
41691ce9ac dnsmasq: remove backported CVE patch
Patch no longer applies/required since bump to v2.87

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 23:04:27 +00:00
Kevin Darbyshire-Bryant
d7f378796f dnsmasq: Support nftables nftsets
Add build option for nftables sets. By default disable iptables ipset
support.  By default enable nftable nftset support since this is what
fw4 uses.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

dnsmasq: nftset: serve from ipset config

Use existing ipset configs as source for nftsets to be compatible with
existing configs. As the OS can either have iptables XOR nftables
support, it's fine to provide both to dnsmasq. dnsmasq will silently
fail for the present one. Depending on the dnsmasq compile time options,
the ipsets or nftsets option will not be added to the dnsmasq config
file.

dnsmasq will try to add the IP addresses to all sets, regardless of the
IP version defined for the set. Adding an IPv6 to an IPv4 set and vice
versa will silently fail.

Signed-off-by: Mathias Kresin <dev@kresin.me>

dnsmasq: support populating nftsets in addition to ipsets

Tell dnsmasq to populate nftsets instead of ipsets, if firewall4 is present in
the system. Keep the same configuration syntax in /etc/config/dhcp, for
compatibility purposes.

Huge thanks to Jo-Philipp Wich for basically writing the function.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

dnsmasq: obtain nftset ip family from nft

Unfortunately dnsmasq nft is noisy if an attempt to add a mismatched ip address
family to an nft set is made.

Heuristic to guess which ip family a nft set might belong by inferring
from the set name.

In order of preference:

If setname ends with standalone '4' or '6' use that, else
if setname has '4' or '6' delimited by '-' or '_' use that (eg
foo-4-bar) else
If setname begins with '4' or '6' standalone use that.

By standalone I mean not as part of a larger number eg. 24

If the above fails then use the existing nft set query mechanism and if
that fails, well you're stuffed!

With-thanks-to: Jo-Philipp Wich <jo@mein.io> who improved my regexp
knowledge.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

dnsmasq: specify firewall table for nftset

Permit ipsets to specify an nftables table for the set.  New config
parameter is 'table'.  If not specified the default of 'fw4' is used.

config ipset
	list name 'BK_4,BK_6'
	option table 'dscpclassify'
	option table_family 'ip'
	option family '4'
	list domain 'ms-acdc.office.com'
	list domain 'windowsupdate.com'
	list domain 'update.microsoft.com'
	list domain 'graph.microsoft.com'
	list domain '1drv.ms'
	list domain '1drv.com'

The table family can also be specified, usually 'ip' or 'ip6' else the
default 'inet' capable of both ipv4 & ipv6 is used.

If the table family is not specified then finally a family option is
available to specify either '4' or '6' for ipv4 or ipv6 respectively.

This is all in addition to the existing heuristic that will look in the
nftset name for an ip family clue, or in total desperation, query the
value from the nftset itself.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 19:47:13 +00:00
Mathias Kresin
7cdf74e163 dnsmasq: add uci-defaults script for ipset migration
When running sysupgrade from an existing configuration, move existing
ipset definitions to a dedicated config section. Later on, it will allow
to serve ipset as well as nftable sets from the same configuration.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2022-11-06 19:47:13 +00:00
Kevin Darbyshire-Bryant
bf27d977f0 dnsmasq: bump to 2.87
Bump dnsmasq to 2.87 & refresh patches

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2022-11-06 19:47:13 +00:00
Hauke Mehrtens
002a99eccd dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)
This backports a commit from upstream dnsmasq to fix CVE-2022-0934.

CVE-2022-0934 description:
A single-byte, non-arbitrary write/use-after-free flaw was found in
dnsmasq. This flaw allows an attacker who sends a crafted packet
processed by dnsmasq, potentially causing a denial of service.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-05 22:05:47 +01:00
Glen Huang
46fbe55971 uhttpd: use procd to reload on acme renew
Calling /etc/init.d/uhttpd reload directly in the acme hotplug script
can inadvertently start a stopped instance.

Signed-off-by: Glen Huang <i@glenhuang.com>
2022-11-04 16:21:00 +01:00