Commit Graph

55 Commits

Author SHA1 Message Date
Chukun Pan
a9233175e8 mediatek: mt7986a/b-rfb: fix 02_network setup
According to the device tree, the lan ports are
lan0 to lan3, and the wan port is eth1.

Fixes: cffc77a ("mediatek: add filogic subtarget")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2022-09-09 21:08:37 +01:00
Daniel Golle
5788b494f9 mediatek: fix sysupgrade on MTK7986 rfba AP
A line in platform.sh was accidentally removed when adding support
for the Bananapi BPi-R3.
Re-add it to fix sysupgrade on the MTK7986 rfba AP.

Fixes: a96382c1bb ("mediatek: add support for Bananapi BPi-R3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-06 03:29:47 +01:00
Daniel Golle
a96382c1bb mediatek: add support for Bananapi BPi-R3
The Bananapi BPi-R3 is a development router board built around the
MediaTek Filogic 830 (MT7986A) SoC.
The board can boot either from microSD, SPI-NAND, SPI-NOR or eMMC.
Only either SPI-NAND or SPI-NOR can be used at the same time, also only
either microSD or eMMC can be used. The various storage options can be
selected using small SMD switches on the board.

Specs:
 * MediaTek MT7986A (Filogic 830) 4x ARM Cortex A53
 * 4T4R 2.4G 802.11bgnax (MT7975N)
 * 4T4R 5G 802.11anac/ax (MT7975P)
 * 2 GB DDR4 RAM
 * 8 GB eMMC
 * 128 MB SPI-NAND flash
 * 32 MB SPI-NOR flash
 * on-board MT7531 GbE switch
 * 2x SFP+ (1 GbE / 2.5 GbE)
 * 5x GbE network port
 * miniPCIe slot (only USB 2.0 connected)
 * uSIM slot (connected to miniPCIe interface)
 * M.2 KEY-E PCIe interface (PCIe x2)
 * microSD card interface
 * 26 PIN GPIO

Hardware details: https://wiki.banana-pi.org/Banana_Pi_BPI-R3

Working:
 * all 4 boot methods incl. installation via U-Boot, sysupgrade, ...
 * copper LAN and WAN ports
 * SFP1 (connected to gmac1, eth1 in Linux)
 * WiFi
 * LEDs
 * Buttons
 * PSTORE/ramoops based dual-boot

Not Working (missing driver features):
 * SFP2 (connected to MT7531 switch)

Untested:
 * M.2/NGFF slot (PCIe x2)
 * mPCIe slot (USB 2.0 + SIM)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-30 13:36:28 +01:00
Daniel Golle
06c4fc6d5e kernel: enable inside secure driver for MediaTek platforms
Older MT7623 ARMv7 SoC as well as new Filogic platforms come with
inside-secure,safexcel-eip97 units. Enable them in DTS and select the
driver kernel module by default on those platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-28 20:33:15 +01:00
Felix Fietkau
cffc77ae55 mediatek: add filogic subtarget
Initially this covers MT7986 only, but it will later be expanded to cover other
Filogic branded platforms by MediaTek

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-28 20:33:15 +01:00