John Crispin
a0543c2bdc
lantiq: several ARV7519RW22 fixes
...
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 47132
2015-10-05 10:28:34 +00:00
John Crispin
b9963bbe80
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
...
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
Signed-off-by: Jannis Pinter <jannis@pinterjann.is>
SVN-Revision: 46224
2015-07-07 13:44:58 +00:00
John Crispin
6bdd209f15
lantiq: Add support for the BT Home Hub 5A
...
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]
[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a
V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46223
2015-07-07 13:44:53 +00:00
John Crispin
ca1db6b5ce
lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)
...
SVN-Revision: 45897
2015-06-05 14:11:36 +00:00
John Crispin
7f77870c19
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
...
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
John Crispin
c9a390f9e1
lantiq: BT Home Hub 3A - userspace
...
BT Home Hub 3A - userspace
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43879
2015-01-08 20:25:48 +00:00
John Crispin
1ba71cbc14
lantiq: Fix adsl led on Home Hub 2B
...
This fixes the adsl led on the Home Hub 2B.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43876
2015-01-08 20:25:28 +00:00
John Crispin
4b5c23e1e3
lantiq: vgv7519 - set some defaults for leds
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 43256
2014-11-14 16:53:53 +00:00
John Crispin
901dddce31
lantiq: set default led configuration from /sys entry later, after per board settings
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 43255
2014-11-14 16:53:48 +00:00
John Crispin
e2915c6981
lantiq: add support for /tmp/sysinfo
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41472
2014-07-02 16:33:11 +00:00
John Crispin
15139d468c
lantiq: BT Home Hub 2B support - userspace
...
Basic userspace configuration for BT Home Hub 2B
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40371
2014-04-03 14:26:58 +00:00
Luka Perkov
7d2c5682b9
lantiq: add support for ZTE H201L
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
John Crispin
b4c722267e
lantiq: fix VG3503J ethernet/gphy led support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin
32f7ae4ce6
lantiq: add a hook to make leds work on the secondary usb bus
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
John Crispin
b585923cc9
lantiq: fix LED-handling oversights
...
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
John Crispin
b42a173664
lantiq: make leds and network work on VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
Jo-Philipp Wich
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
