Commit Graph

8 Commits

Author SHA1 Message Date
Petr Štetiar
d9753f0ec5 ath79, brcm63xx: Fix debounce-interval properties in gpio-keys-polled nodes
This patch fixes wrong usage of debounce-interval subnode property of
gpio-keys-polled nodes, which was used inproperly in parent node, but it
belongs to the subnodes, excerpt from the docs:

 Optional subnode-properties:
     - debounce-interval: Debouncing interval time in milliseconds.
       If not specified defaults to 5.

And the docs are up to date as the source code matches that description
as well:

 if (fwnode_property_read_u32(child, "debounce-interval",
                              &button->debounce_interval))
         button->debounce_interval = 5;

While at it, I've also re-formatted gpio-keys-polled nodes, usually just
adding new lines after every key subnode.

Cc: Tomasz Maciej Nowak <tomek_n@o2.pl>
Cc: Matt Merhar <mattmerhar@protonmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-17 08:05:03 +01:00
Jonas Gorski
7880a6f7fe brcm63xx: drop linux,part-probe usage where possible
It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Jonas Gorski
0f063f8ac7 brcm63xx: drop root parameter from cmdline
The root= parameter overrides the automatic rootfs detection by partition
name, so drop it. Fixes boot from flash after renumeration changes of
partitions due to parser changes.

Fixes FS#1350.

Fixes: a27d59bb42 ("brcm63xx: switch to new partition layout specification")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-13 13:17:26 +01:00
Jonas Gorski
a27d59bb42 brcm63xx: switch to new partition layout specification
Now that we support parsing the expected upstream definition, update
the dts files to it.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00
Jonas Gorski
aba4e29ead brcm63xx: register serial through device tree
Register serial consoles through device tree instead of through board
data.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-12-16 12:57:05 +01:00
Jonas Gorski
0755c2d117 brcm63xx: add pinctrl support
Add and enable pincontrol drivers, and update dts(i) files with
appropriate hogs.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:37 +02:00
Jonas Gorski
a89f5e795a brcm63xx: move the bootargs into the dtb files
Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-21 09:23:22 +02:00
Graham Fairweather
532c3f3218 brcm63xx: add initial support for Netgear EVG2000
This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather <xotic750@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:45:08 +02:00