ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
58,449 Commits 9 Branches 74 Tags 905 MiB
ac422c9788
Commit Graph

34 Commits

Author SHA1 Message Date
John Audia
ac422c9788
kernel: bump 5.15 to 5.15.132 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.132

Removed upstreamed:
	bcm53xx/patches-5.15/037-v6.6-0006-ARM-dts-BCM53573-Add-cells-sizes-to-PCIe-node.patch[1]
	bcm53xx/patches-5.15/037-v6.6-0007-ARM-dts-BCM53573-Use-updated-spi-gpio-binding-proper.patch[2]
	bcm53xx/patches-5.15/037-v6.6-0008-ARM-dts-BCM5301X-Extend-RAM-to-full-256MB-for-Linksy.patch[3]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=b35f3ca1877e024887df205ede952863d65dad36
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=2840d9b9c8750be270fb1153ccd5b983cbb5d592
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.132&id=f086e859ddc252c32f0438edff241859c0f022ce

Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
 2023-09-20 14:13:00 +02:00
Rafał Miłecki
bcd76dc7d8 bcm53xx: store a copy of NVRAM content in NVMEM driver 
This stops NVMEM driver from using MMIO access past booting and messing
with NAND controller state.

Link: https://forum.openwrt.org/t/asus-rt-ac88u-hw-a6-broken-in-22-03-3/147882
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-09-01 11:37:16 +02:00
Arınç ÜNAL
b7ee8c9f83 bcm53xx: backport DT changes for ASUS RT-AC3100 queued for v6.6 
Backport the patch that adds the DT for ASUS RT-AC3100.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
 2023-08-19 11:03:11 +02:00
John Audia
8590531048 kernel: bump 5.15 to 5.15.123 
Manually rebased:
	bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
	bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
	ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*]

Removed upstreamed:
	backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1]
	backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2]
	pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3]
	pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4]
	bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5]
	bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499

Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Audia <therealgraysky@proton.me>
[rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2023-07-30 18:02:47 +02:00
Rafał Miłecki
ca8868a511 bcm53xx: backport more DT changes queued for v6.6 
Those sort out BCM53573 Ethernet info finally.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-07-29 17:04:53 +02:00
Rafał Miłecki
79fd3e62b4 bcm53xx: add BCM53573 Ethernet fix sent upstream for v6.6 
It seems that DSA-based b53 driver never worked with BCM53573 SoCs and
BCM53125.

In case of swconfig-based b53 this fixes a regression. Switching bgmac
from using mdiobus_register() to of_mdiobus_register() resulted in MDIO
device (BCM53125) having of_node set (see of_mdiobus_register_phy()).
That made downstream b53 driver read invalid data from DT and broke
Ethernet support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-07-23 22:49:13 +02:00
Rafał Miłecki
37ff916af7 bcm53xx: backport DT changes queued for v6.6 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-07-14 13:34:34 +02:00
Rafał Miłecki
8674b41c0d bcm53xx: backport DT changes from v6.5 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-07-11 10:30:15 +02:00
Rafał Miłecki
ecd9abc8c0 kernel: use upstream firmware patch for Broadcom's NVRAM 
This replaces our 2 downstream patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-05-14 12:44:50 +02:00
Álvaro Fernández Rojas
e656bcbab0 kernel: add bcma/ssb fallback SPROM support 
This adds generic kernel support for Broadcom Fallback SPROMs so that it can be
used in any target, even non Broadcom ones.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2023-04-23 12:18:35 +02:00
John Audia
f4989239cc kernel: bump 5.15 to 5.15.107 
All  patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
 2023-04-19 00:55:58 +02:00
Rafał Miłecki
b4ae914037 kernel: backport NVMEM late fixes from v6.2 
They were backported to stable kernels but we backport more stuff on our
own so we have to pick up few remaining.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-02-23 09:50:01 +01:00
John Audia
4e9365a654 kernel: bump 5.15 to 5.15.90 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
 2023-01-26 00:16:00 +01:00
Rafał Miłecki
8dfe69cdfc kernel: update nvmem subsystem to the latest upstream 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2023-01-06 22:08:03 +01:00
Linus Walleij
1bef8d62d4 bcm53xx: Patch to support BCMA rev 11 
A backported patch to the BCMA driver necessary to support the
DWL-8610AP and DIR-890L. Patch will be in upstream v6.2.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2022-12-15 15:08:08 +01:00
Christian Lamparter
f6c61571fb bcm53xx: remove MR32's openwrt specific patch for LEDs 
The patch managed to sneak into v5.15 whereas it was
properly deleted for v5.10.

Fixes: 8f6e2bb178 ("bcm53xx: remove MR32's specific get_leds_dt code")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-12-12 09:06:17 +01:00
Rafał Miłecki
8cdafa149e bcm53xx: update DTS files with the latest changes 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-11-10 09:51:25 +01:00
John Audia
1eebe72a80 kernel: bump 5.15 to 5.15.77 
Manually rebased:
   bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
   bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
   bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch
   bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
   lantiq/patches-5.15/0028-NET-lantiq-various-etop-fixes.patch

All other patches automatically rebased

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-11-05 16:26:38 +01:00
John Audia
a34255b795 kernel: bump 5.15 to 5.15.75 
Removed upstreamed:
   bcm27xx/patches-5.15/950-0446-drm-vc4-Fix-timings-for-VEC-modes.patch[1]

Manually rebased:
   patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
   bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
   bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch
   bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

All other patches automatically rebased

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.75&id=2810061452f9b748b096ad023d318690ca519aa3

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-10-30 17:54:59 +01:00
John Audia
b0a94fc60d kernel: bump 5.15 to 5.15.74 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-10-18 15:09:23 +02:00
Aleksey Nasibulin
3413409ef6
bcm53xx: linksys ea6500-v2: extend RAM to full 256MB 
Linksys ea6500-v2 have 256MB of ram. Currently we only use 128MB.
Expand the definition to use all the available RAM.

Signed-off-by: Aleksey Nasibulin <alealexpro100@ya.ru>
[ wrap to 80 columns ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2022-10-13 16:34:50 +02:00
John Audia
9110126620 kernel: bump 5.15 to 5.15.72 
Removed upstreamed:
  generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch[1]
  bcm53xx/patches-5.15/082-v6.0-clk-iproc-Do-not-rely-on-node-name-for-correct-PLL-s.patch[2]

All other patches automatically rebased

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72
Run-tested: bcm2711/RPi4B, mt7622/RT3200, mvebu/cortexa72 (RB5009UG+S+IN)

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=5de02ab84aeca765da0e4d8e999af35325ac67c2
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.72&id=ab5c5787ab5ecdc4a7ea20b4ef542579e1beb49d

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-10-09 22:26:16 +02:00
Rafał Miłecki
77d9cce604 bcm53xx: backport clk driver fix for DT nodes names 
It allows dropping downstream patch renaming DT nodes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-09-29 05:51:25 +02:00
Rafał Miłecki
2f50c53f17 bcm53xx: update NVMEM driver for NVRAM 
Include support for NVMEM cells.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-09-14 14:21:57 +02:00
John Audia
fbe2f7db86 kernel: bump 5.15 to 5.15.67 
All patches automatically rebased

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-09-09 21:08:37 +01:00
Petr Štetiar
ca5c695a45 kernel: bump 5.15 to 5.15.62 
Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2022-08-23 10:37:04 +02:00
John Audia
4921ab0be4 kernel: bump 5.15 to 5.15.56 
Manually rebased:
  bcm27xx/patches-5.15/950-0470-sound-usb-add-device-quirks-for-A4Tech-FHD-1080p-web.patch

Remove upstreamed:
  bcm27xx/patches-5.15/950-0060-tty-amba-pl011-Add-un-throttle-support.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.56&id=2db3b95166f72e6481a79b82b1d6f94f4b18fcc1

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-07-31 18:55:22 +02:00
Christian Lamparter
e37ba80633 bcm53xx: add support for Meraki MR26 
Meraki MR26 is an EOL wireless access point featuring a
PoE ethernet port and two dual-band 3x3 MIMO 802.11n
radios and 1x1 dual-band WIFI dedicated to scanning.

Thank you Amir for the unit and PSU.

Hardware info:
SOC   : Broadcom BCM53015A1KFEBG (dual-core Cortex-A9 CPU at 800 MHz)
RAM   : SK hynix Inc. H5TQ1G63EFR, 1 Gbit DDR3 SDRAM = 128 MiB
NAND  : Spansion S34ML01G100TF100, 1 Gbit SLC NAND Flash = 128 MiB
ETH   : 1 GBit Ethernet Port - PoE
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn
WIFI3 : Broadcom BCM43428 abgn (1x1:1 - id: 43428)
BUTTON: one reset button
LEDS  : RGB-LED
MISC  : Atmel AT24C64 8KiB EEPROM (i2c - seems empty)
      : Ti INA219 26V, 12-bit, i2c output current/voltage/power monitor
      : TPS23754, High Power/High Efficiency PoE Interface+DC/DC Controller

SERIAL:
	WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
	The Serial setting is 115200-8-N-1. The board has a populated
	right angle 1x4 0.1" pinheader.
	The pinout is: VCC (next to J3, has little white arrow), RX, TX, GND.

This flashing procedure for the MR26 was tested with firmware:
    "22-143410M-gf25cbf5a-asa".
    U-Boot 2012.10-00063-g83f9fe4 (Jun 04 2014 - 21:22:39)

A guide how to open up the device is available on the wiki:
<https://openwrt.org/toh/meraki/mr26>

Notes:
 - The WIFI do work to a degree. Limited to 802.11bg in the 2.4GHz band.
 - the WIFI macs are made up.

0. Create a separate Ethernet LAN which can't have access to the internet.
   Ideally use 192.168.1.2 for your PC. The new OpenWrt firmware will setup
   the network via DHCP Discovery, so make sure your PC is running
   a DHCP-Server (i.e.: dnsmasq)
   '# dnsmasq -i eth# -F 192.168.1.5,192.168.1.50
   Download the openwrt-meraki-mr26 initramfs file from openwrt.org and
   rename it to something simple like mr26.bin. Then put it into the tftp's
   server directory.

1. Disassemble the MR26 device by removing all screws (4 screws are located
   under the 4 rubber feets!) and prying open the plastic covers without
   breaking the plastic retention clips. Once inside, remove the plastic
   back casing. Be careful, there some "hidden" retention clips on both
   sides of the LAN port, you need a light to see those. Next, you want to
   remove all the screws on the outer metal shielding to get to the PCB.
   It's not necessary to remove the antennas!

2. Connect the serial cable to the serial header and Ethernet patch cable
   to the device.

4. Before connecting the power, get ready flood the serial console program
   with the magic:   xyzzy  . This is necessary in order to get into the
   u-boot prompt. Once Ready: connect power cable.

5. If you don't get the "u-boot>" prompt within the first few seconds,
   you have to disconnect and reconnect the power cable and try again.

6. In the u-boot prompt enter:

   setenv ipaddr 192.168.1.4
   setenv serverip 192.168.1.2
   tftpboot ${meraki_loadaddr} mr26.bin; bootm

   this will boot a in-ram-only OpenWrt image.

7. Once it booted use sysupgrade to permanently install OpenWrt.
   To do this: Download the latest sysupgrade.bin file and move
   it to the device. Then use sysupgrade *sysupgrade.bin to install it.

    WARNING: DO NOT DELETE the "storage" ubi volume!

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-07-15 15:21:44 +02:00
Rui Salvaterra
b55efebb1f kernel: bump 5.15 to 5.15.47 
Deleted (upstreamed):
generic/backport-5.15/702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch [01]

[01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.47&id=b24ca1cf846273361d5bd73a35de95a486a54b6d

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[Removed 702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-06-27 00:57:16 +02:00
Rui Salvaterra
251a382c28 kernel: bump 5.15 to 5.15.46 
Deleted (upstreamed):
generic/backport-5.15/400-mtdblock-warn-if-opened-on-NAND.patch [01]
generic/backport-5.15/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch [02]
bcm27xx/patches-5.15/950-0029-Revert-mailbox-avoid-timer-start-from-callback.patch [03]
bcm27xx/patches-5.15/950-0417-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [04]
bcm27xx/patches-5.15/950-0740-drm-vc4-hvs-Fix-frame-count-register-readout.patch [05]
bcm27xx/patches-5.15/950-0755-drm-vc4-hvs-Reset-muxes-at-probe-time.patch [06]
bcm27xx/patches-5.15/950-0759-drm-vc4-txp-Don-t-set-TXP_VSTART_AT_EOF.patch [07]
bcm27xx/patches-5.15/950-0760-drm-vc4-txp-Force-alpha-to-be-0xff-if-it-s-disabled.patch [08]
bcm53xx/patches-5.15/031-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch [09]
mediatek/patches-5.15/102-mt7629-enable-arch-timer.patch [10]

Manually rebased:
bcm27xx/patches-5.15/950-0741-drm-vc4-hvs-Use-pointer-to-HVS-in-HVS_READ-and-HVS_W.patch

[01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=f41c9418c5898c01634675150696da290fb86796
[02] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d5b66645305c6f3a1b2cf75cee4157b07f293309
[03] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=119f99209d8531359bcb935f252ec435f9d21b13
[04] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=c4e1280abead1552e1764684079a43e222ccd163
[05] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=08465a1889cb48ec64431e9db745b5be15399251
[06] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=0e26a6da02e63b75b629573d13966c36aa6264f0
[07] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=01c9020b2e7c85e394879f34851805179ac3d1d8
[08] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d47f85cc0171a5d3c5bd8cbb8a98983ca3357cbd
[09] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=5151f24ac937ff7eb1f078257c66e3c0f0296010
[10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=ffea838686b82fbb2801cdfad6ba5309d15c032d

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-27 00:57:16 +02:00
Rafał Miłecki
c6f16b63fa bcm53xx: copy patch disabling GRO to kernel 5.15 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-06-24 09:09:27 +02:00
Rafał Miłecki
d19c37486b bcm53xx: copy bgmac revert (performance fix) to 5.15 
Ref: 230c9da963 ("bcm53xx: revert bgmac back to the old limited max frame size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-06-17 08:04:31 +02:00
Rui Salvaterra
be381a7ac7 kernel: bump 5.15 to 5.15.33 
Deleted (upstreamed):
generic/backport-5.15/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch [1]
generic/backport-5.15/730-v5.16-hv-utils-add-PTP_1588_CLOCK-to-Kconfig-to-fix-build.patch [2]
generic/pending-5.15/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch [3]
generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch [4]

Manually rebased:
generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch
ramips/patches-5.15/710-at803x.patch

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=d29cda15cab086d82d692de016f7249545d4b6b4
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=d5aad7d63b1b5c1f3c4b69e12c05e7c7d196fae8
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=ed750e22e44366e264bcdf7b1cf0713f08f7980a
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.33&id=0fe94b84c43cfea867e1721606185e8686d7d32f

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[Refresh patches again]
[Remove generic/pending-5.15/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-04-09 19:31:46 +02:00
Rafał Miłecki
9ac80a47ea bcm53xx: prepare kernel 5.15 support 
Tested on Luxul XWR-3150 (boot, NAND, PCIe, switch, Ethernet).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2022-03-30 23:22:46 +02:00