Commit Graph

52317 Commits

Author SHA1 Message Date
Birger Koblitz
a96b73a890 realtek: Packet Inspection Engine support for RTL930x SoCs
Adds the RTL930x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
2d8d81fe28 realtek: Packet Inspection Engine support for RTL839x SoCs
Adds the RTL839x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
87b3bd07a4 realtek: Packet Inspection Engine support for RTL838x SoCs
Adds the RTL838x-specific PIE support routines.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
54805fc911 realtek: Add driver support for TC offloading
This adds support for offloading TC flower by using the Packet Inspection Engine
of the RTL-SoCs. Basic infrastructure support is provide with callbacks to the
tc subsystem and support for HW packet counters.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
a6678accbd realtek: Add port to smi-bus address mapping
All RTL SoCs addresss PHYs via their port number, which is mapped to an
SMI address. Add support for configuring this mapping via the .dts on all
SoCs apart from the 839x, where the mapping to the 64 ports is fixed.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
2ab4d40293 realtek: Increase maximum RX ring buffer length
Increase the maximum ring buffer length in order to improve
performance on RTL839x devices.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
9eab76c84e realtek: Improve TX CPU-Tag usage
On RTL83xx enable learning of the MAC source address of the CPU port
from outgoing packets. Add documentation on bit fields. On RTL93xx
enable port-mask usage and the use of internal priority, these
SoCs automatically learn the MAC.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
ca04e2dfd0 realtek: Remove storm control and attack warnings
Remove the storm control and attack warnings from the IRQ handler
of the Ethernet driver. There was no consequence to the detection
and the kernel can also handle at least the attacks itself.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Birger Koblitz
e88ac0bbd1 realtek: Correct TX ring size in ethernet driver
This enlarges the size of the TX ring buffer, which prevents warnings
when the buffer runs out of space.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-10-09 08:25:05 +02:00
Paul Spooren
f887c93be7 config: pack toolchain per default on buildbots
The toolchain can be used for accelerated CI builds. This commit enabled
the packing of it by default on buildbots.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-08 15:06:44 -10:00
Daniel Golle
a7f794cd2a build: select procd-seccomp if kernel support is present
Install ld-preload hooks allowing to add seccomp filters for arbitrary
services if kernel support for seccomp is present.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-07 23:22:18 -10:00
Daniel Golle
44f694ba1b build: select procd-ujail if !SMALL_FLASH
Add procd-ujail to DEFAULT_PACKAGES if not building for
space-constraint (FEATURES:=small_flash) targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-07 23:22:05 -10:00
Ronny Kotzschmar
72bfc35f8f umdns: add missing syscalls to seccomp filter
The 'mmap', 'mmap2', 'munmap' syscalls are missing.
Found with 'utrace /usr/sbin/umdns'.

Signed-off-by: Ronny Kotzschmar <ro.ok@me.com>
2021-10-07 23:21:59 -10:00
Rosen Penev
c2222f74c8 tools/meson: update to 0.59.2
Update install procedure based on upstream feedback. Normally, meson is
to be installed with pip. But as pip is not mandated by the build
system, it cannot be used. Upstream provides a nice script to pack meson
automatically.

Moved src/ to files/. No need to copy to BUILD_DIR.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-07 14:09:40 -10:00
Rafał Miłecki
e4e410733f kernel: export switch_generic_set_link() symbol
This fixes:
ERROR: "switch_generic_set_link" [drivers/net/phy/b53/b53_common.ko] undefined!

At some point all packages for swconfig drivers were dropped and targets
were meant to have them built into kernels. It seems b53 (re-)gained its
kmod-switch-bcm53xx however and b53 needs to be built as module.

Fixes: b2cfed48f6 ("Revert "swconfig: fix Broadcom b53 support"")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-07 15:13:16 +02:00
Matthew Hagan
2e4193f3cf kernel: 5.10: dsa: don't set skb->offload_fwd_mark when not offloading bridge
Add Vladimir Oltean's "net: dsa: don't set skb->offload_fwd_mark when
not offloading the bridge"

This covers cases where packets received by an upstream switch must be
forwarded back on the same port, which skb->offload_fwd_mark normally
prevents.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
2021-10-07 14:22:22 +02:00
Rafał Miłecki
b2cfed48f6 Revert "swconfig: fix Broadcom b53 support"
This reverts commit 8f9cd1af0f.

That commit was meant to add a single EXPORT_SYMBOL_GPL() but it
actually also added few .of_match_table-s. One commit should handle one
thing and should not introduce unrelated changes.

Regarding actual changes:
1. EXPORT_SYMBOL_GPL is not required as we don't build swconfig drivers
   as modules.
2. PHY drivers must not have .of_match_table. That is allowed for MDIO
   drivers. This could work for some time (although is didn't for me on
   bcm53xx) but does not with kernel 5.10. It causes a soft lockup and
   upstream developers confirmed it's an unsupported design.

Link: https://lore.kernel.org/netdev/2b1dc053-8c9a-e3e4-b450-eecdfca3fe16@gmail.com/t/#mf80e472f35ee23f7a75cbf5b1e101a17ab3a64a3
Cc: Tobias Schramm <tobleminer@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-07 11:30:55 +02:00
Rafał Miłecki
fd71ef34b7 kernel: backport bgmac upstream commits from 5.15 / for 5.16
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-07 11:30:18 +02:00
Adrian Schmutzler
d69bf6601e mpc85xx: switch to Kernel 5.10
This has testing support for 7 months. Time to switch.

TL-WDR4900 is disabled due to kernel size limitation.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-05 23:54:48 +02:00
Pawel Dembicki
ce793584e5 kernel: 5.10: add missing symbols
Three missing symbols were found during mpc85xx/p2020 compilation.

While at it, CONFIG_FSL_ENETC_MDIO is moved to generic config
for consistency.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[move CONFIG_FSL_ENETC_MDIO, remove redundant definitions, adjust
commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-05 23:54:18 +02:00
Adrian Schmutzler
eb3a99bc18 bcm27xx: remove obsolete kernel 5.4
With the upgrade to kernel 5.10 per default the old version is no
longer required to be in tree.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-05 23:54:18 +02:00
Kevin Darbyshire-Bryant
81ba544f88 firmware-utils: bump to git HEAD
f9ad6b3 Add more missing includes for byte swap operations

Basically stop it exploding on MacOS

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-10-05 21:52:58 +01:00
Stijn Tintel
b4a3c20aa4 kernel: drop kmod-gpio-dev
The GPIO_DEVICE symbol belonged to a custom driver that was removed from
OpenWrt in 2012. The symbol never existed in the upstream kernel.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-10-05 23:30:48 +03:00
Stijn Tintel
57634f472f bcm27xx: add RPI_AXIPERF symbol
When KERNEL_PERF_EVENTS is enabled in OpenWrt, or PERF_EVENTS in the
kernel config, the RPI_AXIPERF is exposed. Add it to the subtarget
kernel configs to avoid build failures.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-10-05 23:30:48 +03:00
Stijn Tintel
6f787b62d0 bcm27xx: add SND_SOC_AD193X_{I2C,SPI} symbols
When building an image for the bcm27xx target, some combinations of
config options will fail to build due the SND_SOC_AD193X_I2C and
SND_SOC_AD193X_SPI kernel config symbols being missing.

The problem only occurs on bcm27xx as the target contains a patch that
modifies the Kconfig file containing the symbols; in the vanilla kernel,
there is no string after the tristate keyword so the symbol is not
exposed.

The _I2C symbol depends on I2C, which is enabled in the kernel configs
of all bcm27xx subtargets.

The _SPI symbol depends on SPI_MASTER, which is exposed by either
kmod-mmc-spi, kmod-spi-bitbang, kmod-spi-dev, kmod-spi-bcm2835 or
kmod-spi-bcm2835-aux.

Both symbols are defined in the sound/soc/codecs directory, which is
only included when SND_SOC is enabled, so this problem doesn't occur
when kmod-sound-soc-core is not enabled. As the
kmod-sound-soc-bcm2835-i2s package disables the SND_SOC_AD193X_SPI
symbol, it also doesn't occur when kmod-sound-soc-bcm2835-i2s is
enabled.

As there are several possible config combinations that do exhibit this
problem, it is best to solve it by adding the missing symbols to the
subtarget kernel configs. By doing this we can remove them from the
kmod-sound-soc-bcm2835-i2s package.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-10-05 23:30:48 +03:00
Rosen Penev
297cb8c147 tools/cmake: update to 3.21.3
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-05 20:59:51 +02:00
Rosen Penev
5266a27359 tools/bison: update to 3.8.2
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-10-05 20:59:41 +02:00
Hannu Nyman
9fb038ca64 busybox: update to 1.34.1
Update busybox to version 1.34.1, which is a minor
maintenance release. It contains just the two post-1.34.0
upstream patches that we earlier backported plus a few fixes
to awk.

* Remove the two backported upstream patches that are
  now unnecessary.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2021-10-05 20:59:32 +02:00
Petr Štetiar
8cc9a74a3f firmware-utils: update to version 2021-10-05
Includes following changes:

 db65821f006c cmake: fix missing install target
 3a0cfc856991 Add initial GitLab CI support
 8f47adea6f87 Add missing includes for byte swap operations
 fbafae9f8037 Convert to CMake based project

Additionaly moves source code into separate Git project repository and
converts the package build to utilize CMake.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[rmilecki: rebase, update to the latest repo git & rm -r src]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-05 16:20:10 +02:00
David Bauer
f82c93b93c ramips: fix USW-Flex reversed switch-port order
Switch port order was reversed due to reading the internal labling
(which mismatches the one on the case).

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-10-04 23:24:32 +02:00
Daniel Golle
b6da10f2d1
uboot-mediatek: update to 2021.10
U-Boot 2021.10 has been released.
Rebase mediatek patches on top of new release and remove some patches
which have been merged upstream.

Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and
Linksys E8450 (mt7622).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-04 20:46:30 +01:00
Paul Fertser
ed7769aa40 dnsmasq: add explicit "set:" for client-matching options
Bring the usage in line with the dnsmasq man page and the other options
where set: is mandatory.

No functional change.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-10-03 21:48:16 +02:00
Paul Spooren
0d1ebf0d6d build: fix which detection on Fedora & MacOS
Fix Fedora 34/35 issue where 'which' detection of 'which' wasn't working
because Fedora use alias and proc

Fixup of fca5ad55d2 prereq-build: fix `which` detection on Fedora

Reported-by: Jani Partanen <rtfm@iki.fi>
Suggest-by: Etienne Champetier <champetier.etienne@gmail.com>
Tested-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 19:53:24 -10:00
Hauke Mehrtens
57b323ce38 kernel: Deactivate some ARM64 errata workarounds
This deactivates the following workarounds for erratas in ARM64 CPUS:
CONFIG_ARM64_ERRATUM_1165522: Cortex-A76 cores (r0p0, r1p0, r2p0)
CONFIG_ARM64_ERRATUM_1286807: Cortex-A76 cores (r0p0 to r3p0)
CONFIG_ARM64_ERRATUM_1418040: Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1)
CONFIG_CAVIUM_TX2_ERRATUM_219: Cavium ThunderX2
CONFIG_FUJITSU_ERRATUM_010001: Fujitsu-A64FX

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-03 01:13:18 +02:00
Hauke Mehrtens
7d6976bb6b sunxi: Refresh kernel 5.10 configuration
The cortex53 subtarget was missing multiple config options and the other
targets just defined some options which are not needed.

Fixes: 83672f506d ("sunxi: add testing Linux 5.10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-03 01:13:18 +02:00
Hauke Mehrtens
2c6c77bb95 sunxi: Activate CONFIG_SATA_PMP
The kernel 5.4 configuration activated SATA Port Multiplier support, add
it to kernel 5.10 too.

Fixes: 83672f506d ("sunxi: add testing Linux 5.10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-03 01:13:18 +02:00
Sungbo Eo
c7d5c26ab7 kirkwood: refresh kernel config
Refresh config with make kernel_oldconfig.

Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-10-03 01:13:18 +02:00
Sungbo Eo
dbfebd14f6 kirkwood: solidify SATA_PMP config
SATA_PMP option is no longer exposed when no SATA host driver is enabled
since upstream linux commit bd322af15ce9 ("ata: make SATA_PMP option
selectable only if any SATA host driver is enabled").

Commit 1bb3f593ee ("kirkwood: update config for kernel 5.10") manually
added CONFIG_SATA_PMP=y to config file, but the config will disappear for
every kernel_oldconfig refresh.

To prevent this, a small hack is added, which selects SATA_HOST
automatically when SATA_PMP is enabled. This patch can be dropped if
SATA_MV is ever re-added into kernel config file.

Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[Move patch to generic/hack-5.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-03 01:13:12 +02:00
Adrian Schmutzler
2d977eb3d5 ath79: add recipe for common setup with loader-okli-compile
These instructions are repeated for a few devices now, let's move
them to shared definition so we do not repeat ourselves too often.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 21:26:12 +02:00
Adrian Schmutzler
53d19bb8cf treewide: use AUTORELEASE on all uboot-* packages
Nobody ever updates PKG_RELEASE when changing devices or setup in
the various uboot-* packages. Use $(AUTORELEASE) so we still have
proper versioning there.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-10-02 21:26:12 +02:00
Paul Fertser
3810e89729 realtek: ensure output drivers are enabled in RTL8231
The bootloader can leave the GPIO expander in a state which doesn't have
output drivers enabled so GPIOs will properly work for input but output
operations will have no effect.

To avoid disrupting the boot in case the bootloader left direction and
data registers in an inconsistent state (e.g. pulling SoC's reset to 0)
reconfigure everything as input.

Reviewed-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2021-10-02 21:26:12 +02:00
Rafał Miłecki
c4d5e60f61 bcm4908img: detect Linksys images
Linksys uses an extra 0x100 bytes long tail for BCM4908 images.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-02 20:26:42 +02:00
Rafał Miłecki
063038bcef bcm4908img: store offset of tail data
This simplifies some operations as it doesn't have to be caculated over
and over. It will also allow adding support for more vendor formats.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-10-02 20:26:42 +02:00
Paul Spooren
8ff8323335 mvebu: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:16:33 +02:00
Paul Spooren
b48d30521d ipq806x: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:15:23 +02:00
Paul Spooren
cac2ca1d43 gemini: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:14:42 +02:00
Paul Spooren
b6645b7f38 malta: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:13:46 +02:00
Paul Spooren
e439613f1f armvirt: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:13:46 +02:00
Paul Spooren
eea90d2dff x86: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:13:46 +02:00
Hauke Mehrtens
50f456b46c kernel: bump 5.4 to 5.4.150
Manually rebased:
  generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
  mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch

Removed upstreamed:
  layerscape/patches-5.4/819-uart-0004-MLK-18137-fsl_lpuart-Fix-loopback-mode.patch

All others updated automatically.

Compile-tested on: lantiq/xrx200, armvirt/64
Runtime-tested on: lantiq/xrx200, armvirt/64

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-10-02 16:45:56 +02:00