Commit Graph

945 Commits

Author SHA1 Message Date
Paul Spooren
8019410f56 x86: add missing Lex 3I380NX network detection
The Lex 3I380NX industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.

This commit is nearly redundant to 3d0818f5eba8 ("platform/x86:
pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table")
but for all Lex Baytrail devices.

The original vendor firmware is only available using the WaybackMachine:
http://www.lex.com.tw/products/3I380NX.html

Signed-off-by: Michael Schöne <michael.schoene@rhebo.com>
Signed-off-by: Paul Spooren <paul.spooren@rhebo.com>
(Hans broader version for more Lex Baytrail systems, v5.15)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-08-05 14:10:11 +02:00
John Audia
9d2ffe8cb8 x86: update defconfig for 5.15.57
Add some new/missing symbols relating to speculative execution mitigations[1].

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.15.57&id2=v5.15.56

Signed-off-by: John Audia <therealgraysky@proton.me>
2022-07-31 18:55:22 +02:00
John Audia
56760c0b13 x86: update defconfig for 5.10.133
Add some new/missing symbols relating to speculative execution mitigations[1].

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v5.10.133&id2=v5.10.132

Signed-off-by: John Audia <therealgraysky@proton.me>
2022-07-29 23:03:41 +02:00
Hauke Mehrtens
aae3a8a254 x86: 64: Add kmod-igc to default packages
This adds the igc driver for the Intel 2.5GBit Ethernet chip to the
default packages.

Fixes: #10064
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-06-29 00:57:57 +02:00
Rui Salvaterra
aee1215c0e kernel: 5.15: x86-64: enable CONFIG_SLS
Starting with GCC 12, we have the possibility of mitigating straight-line
speculation vulnerabilities in x86-64 targets. Make it so.

Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-06-27 00:57:16 +02:00
Christian Lamparter
9fc2d58bf8 x86: fix damaged config 5.10 refresh
Restore CONFIG_I8K + CONFIG_INTEL_INT0002_VGPIO that got
removed when I refreshed the config. Each x86 target gets
its own CONFIG_CRYPTO_BLAKE2S + LIB settings as only the
x86_64 can use the accelerated x86 version.

Also remove two extra spaces that sneaked into geode's config.

Fixes: 539e60539a ("generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-24 23:59:14 +02:00
Tomasz Maciej Nowak
539e60539a generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]
This is now built-in, enable so it won't propagate on target configs.

Link: https://lkml.org/lkml/2022/1/3/168
Fixes: 79e7a2552e ("kernel: bump 5.15 to 5.15.44")
Fixes: 0ca9367069 ("kernel: bump 5.10 to 5.10.119")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(Link to Kernel's commit taht made it built-in,
CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-24 17:10:24 +02:00
Christian Lamparter
c97c8b814a kernel/x86: move x86' specific watchdogs to the x86 target
upstream linux have these watchdogs locked behind X86.
These will not build on other architectures. So move them
to target/linux/x86/modules.mk

drivers/watchdog/Kconfig:

|config F71808E_WDT
|	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
|	depends on X86
|[...]
|config IT87_WDT
|	tristate "IT87 Watchdog Timer"
|	depends on X86
|[...]
|config ITCO_WDT
|	tristate "Intel TCO Timer/Watchdog"
|	depends on (X86 || IA64) && PCI
|[...]
|config W83627HF_WDT
|	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
|	depends on X86
|[...]

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-07 14:31:22 +02:00
Christian Lamparter
0cd1fc0fe5 x86: detangle meraki-mx100 / nu801 build confusion
Grommish reported the dreaded build error that happend with 5.4
since the kernel didn't have the cgpio v2 interface. His reason
for the removed 5.4 was that the octeon target had a memory leak
issue, so he had to backport the removed 5.4 kernel for his tests.

Chen Minqiang chimed in and noted that no matter what (i.e.
@TARGET_x86 in depends) didn't prevent the package from being build
on other targets.

From what I can tell, the reason for this was that +nu801 meant
that kmod-meraki-mx100 pulled in an unconditional dependency as
part of to the kernel build.

|scripts/package-metadata.pl mk tmp/.packageinfo
|
|$(curdir)/kernel/linux/compile += $(curdir)/firmware/linux-firmware/compile \
|	$(curdir)/firmware/prism54-firmware/compile \
|	$(curdir)/kernel/gpio-button-hotplug/compile \
|	>>> $(curdir)/system/gpio-cdev/nu801/compile <<<

change this by making the dependency conditional on the
meraki-mx100 module itself. Note that the nu801 enables/sets
the  KCONFIG for the cgpio v2 interface itself, since the
userspace program and not the kernel meraki-mx100 relies on it.

Reference: <https://github.com/openwrt/openwrt/commit/eeb8fd4ce7e9>
Reported-by: Grommish <grommish@gmail.com>
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-07 14:31:22 +02:00
Christian Lamparter
d022451906 x86: add ib700wdt module for x86 qemu watchdogs
QEMU+Libvirt can emulate the ib700wdt watchdogs
which due to its I/O-Port mapping makes it x86
specific.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-07 14:31:22 +02:00
Rui Salvaterra
6e837bc5d8 kernel: x86: remove an upstreamed patch
012-pcengines-apu2-detect-apuv4-board.patch is upstream since Linux 5.5 [1].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.5&id=3d00da1de3ea36ba44f4a7ba76c8c8b16f98204b

Acked-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-04-20 11:53:07 +01:00
Aleksander Jan Bajkowski
a98ded6c5c kernel: move some symbols to generic config
This commit add some enabled symbols to generic config.
LTO is only supported by clang compiler and therefore should
be disabled in the generic config instead of duplicating this
symbol in each target. CONFIG_LTO_NONE do this job.

The second group of symbols is enabled by the options available
in the generic config and is therefore added here:
* CONFIG_AF_UNIX_OOB is selected by CONFIG_NET && CONFIG_UNIX,
* CONFIG_BINARY_PRINTF is selected by CONFIG_BPF_SYSCALL,
* CONFIG_NET_SOCK_MSG is selected by CONFIG_BPF_SYSCALL && CONFIG_NET.

The other symbols are disabled and should be in the generic config.

This commit also removes these symbols from subtargets.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
2022-04-09 19:31:46 +02:00
Petr Štetiar
be9a69caa8 kernel: modules: fix kmod-mdio-devres dependency for 5.15
Fixes following build issues:

 Package kmod-r8169 is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-ixgbe is missing dependencies for the following libraries:
 mdio_devres.ko

 Package kmod-amd-xgbe is missing dependencies for the following libraries:
 mdio_devres.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
12c33d99c8 x86: update config for 5.15
Refresh kernel config with `make kernel_oldconfig` make target.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
9b3bc5d119 x86: enable 5.15 as testing kernel
So anyone interested can help with new kernel version integration and
testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Petr Štetiar
7ef75445c5 x86: copy config and patches from 5.10 to 5.15
So the upcoming changes needed for 5.15 can be reviewed easily.
Removing following patches backported from 5.15:

 * 101-v5.15-mfd-lpc_ich-Enable-GPIO-driver-for-DH89xxCC.patch
 * 102-v5.15-platform-x86-add-meraki-mx100-platform-driver.patch

Removed upstreamed patch `300-pcengines_apu1_led.patch` in commit
1b40faf7e4ab ("leds: apu: extend support for PC Engines APU1 with newer
firmware")

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-03-29 12:02:50 +02:00
Christian Lamparter
eeb8fd4ce7 gpio-cdev: move kmod-leds-uleds dependency to MX100
The inclusion of the kmod-leds-uleds into the userspace
nu801 package causes a circular dependency inside the
buildsystem... which causes it to be picked regardless
of other DEPENDS values.

In case of the mx100, this could be solved by moving the
kmod-leds-uled dependency to the kmod-meraki-mx100.

Bonus: drop @!LINUX_5_4 from kmod-meraki-mx100
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-27 15:39:27 +02:00
Raylynn Knight
c7bcbcd492 x86: Add support for Sophos XG 85 and XG 86 devices
This commit builds on previous efforts to add support
for Sophos devices.

* Add support for Sophos XG 85 with/without wireless
* Add support for Sophos XG 86 with/without wireless

Tested on Sophos XG 85w rev1 and XG 86 rev 1

Signed-off-by: Raylynn Knight <rayknight@me.com>
2022-03-26 02:02:45 +01:00
Chris Blake
3f874519b4 gpio-cdev: re-add nu801 userspace driver
This reverts commit 80b7a8a7f5.

Now that 5.10 is the default kernel for all platforms, we can
bring back the NU801 userspace driver for platforms that rely
on it. Currently it's used on the MX100 x86_64 target, but
other Meraki platforms use this controller.

Note that we also now change how we load nu801. The way we did
this previously with procd worked, but it meant it didn't load
until everything was up and working.

To fix this, let's call nu801 from boot and re-trigger the
preinit blink sequence. Since nu801 runs as a daemon this is
now something we can do.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
(removed empty line, currently only MX100 uses it so: @TARGET_x86)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-03-25 18:14:13 +01:00
Matthias Schiffer
c8350dfb3c
x86: legacy: enable pata_sis driver
This driver is needed to boot from CompactFlash on the Siemens Futro S400.
The device has an AMD NX1500 CPU, which seems to be unsupported by the
geode subtarget, so it must use legacy.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-10 23:31:05 +01:00
Rui Salvaterra
72d2c54ccb kernel: 5.10: allocate last level PTEs in high memory
Enable support for allocating user space page table entries in high memory [1],
for the targets which support this feature. This saves precious low memory
(permanently mapped, the only type of memory directly accessible by the kernel).

[1] https://www.kernel.org/doc/html/latest/vm/highmem.html

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-03-01 22:57:34 +00:00
Florian Eckert
4e28494144 x86: geode: fix package nameing kmod-crypto-ebc does not exist
This commit fixes the package naming that was added by commit:
e1e4cbde5c

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-02-26 13:36:30 +01:00
Jax Jiang
1050e66c8f x86: grub2: search for the "kernel" filesystem on all disks
Previously, grub2 was hardcoded to always look on "hd0" for the
kernel.

This works well when the system only had a single disk.
But if there was a second disk/stick present, it may have look
on the wrong drive because of enumeration races.

This patch utilizes grub2 search function to look for a filesystem
with the label "kernel". This works thanks to existing setup in
scripts/gen_image_generic.sh. Which sets the "kernel" label on
both the fat and ext4 filesystem variants.

Signed-off-by: Jax Jiang <jax.jiang.007@gmail.com>
Suggested-by: Alberto Bursi <bobafetthotmail@gmail.com> (MX100 WA)
(word wrapped, slightly rewritten commit message, removed MX100 WA)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 20:45:12 +01:00
Raylynn Knight
6905ad2494 x86: fix support for Sophos SG/XG wireless products
Correct typo that caused network interfaces for Sophos
SG/XG wireless devices to not be configured properly.

Tested on Sophos SG 135wr2, Sophos XG 125wr2 and
Sophos SG 105wr1

Signed-off-by: Raylynn Knight <rayknight@me.com>
2022-02-19 18:29:42 +01:00
Paul Fertser
e1e4cbde5c x86: geode: add kmod-crypto-ebc needed for hw acceleration
Module kmod-crypto-hw-geode provides accelerated cbc(aes) and ecb(aes)
but the software implementation is also needed when AES key size isn't
128 so that the operation can fall back. Add the kmod so that it would
all work as expected out of the box.

Tested-by: timur_davletshin
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2022-02-19 13:10:01 +01:00
Stefan Lippers-Hollmann
abc2821286 x86: improve sysinfo handling of dummy values
Fall back to using board_vendor and board_name, if known dummy values
are used for sys_vendor and product_name.

Examples:
	To be filled by O.E.M.:To be filled by O.E.M.
-->	INTEL Corporation:ChiefRiver

	System manufacturer:System Product Name
-->	ASUSTeK COMPUTER INC.:P8H77-M PRO

	To Be Filled By O.E.M.:To Be Filled By O.E.M.
-->	ASRock:Q1900DC-ITX

	Gigabyte Technology Co., Ltd.:To be filled by O.E.M.
-->	Gigabyte Technology Co., Ltd.:H77M-D3H

	empty:empty
-->	TYAN Computer Corporation:TYAN Toledo i3210W/i3200R S5211

	To Be Filled By O.E.M.:To Be Filled By O.E.M.
-->	ASRock:H77 Pro4-M

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2022-01-08 23:25:05 +01:00
Raylynn Knight
2e1206ad23 x86: add/improve support for Sophos SG/XG products
* Add support for Sophos SG/XG-115 r1, r2 with/without wireless
* Add support for Sophos SG/XG-125 r1, r2 with/without wireless
* Add wireless support for SG/XG-105

Signed-off-by: Raylynn Knight <rayknight@me.com>
2021-12-29 22:55:16 +01:00
Sergey Ryazanov
fa3690f8f1 kernel: 5.10: consolidate mac80211 crypto options
Each of
- CRYPTO_AEAD2
- CRYPTO_AEAD
- CRYPTO_GF128MUL
- CRYPTO_GHASH
- CRYPTO_HASH2
- CRYPTO_HASH
- CRYPTO_MANAGER2
- CRYPTO_MANAGER
- CRYPTO_NULL2

either directly required for mac80211 crypto support, or directly
selected by such options. Support for the mac80211 crypto was enabled in
the generic config since c7182123b9 ("kernel: make cryptoapi support
needed by mac80211 built-in"). So move the above options from the target
configs to the generic config to make it clear why do we need them.

CC: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2021-12-17 16:16:34 +01:00
Sergey Ryazanov
b61ab8f57e kernel: filter out both Clang and LLD versions
Both CLANG_VERSION and LLD_VERISON are autogenerated runtime
configuration options, so add them to the kernel configuration filter
and remove from generic and per-target configs to keep configs clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2021-12-17 16:16:34 +01:00
Christian Lamparter
4deaeaa13c x86: remove old lzma tuning patch
Chen Minqiang reported in his GitHub PR #4733 that:
With CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y option set,
the popular x86/amd64 target's initramfs-kernel failed to boot.

The cause for this boot failure is that the LZMA compression
uses a the first bytes to encode the compression parameters.
It does not have a fixed magic. Yes, this only works if the
the existing lzma options in the upstream are not changed.

This patch does away with OpenWrt special LZMA options tuning
since it is rather unlikely that upstream will improve the
compression algorithm detection after all this time. Even
though, the tuning produced a smaller initramfs (~1.1% in a
spot check).

Link: <https://github.com/openwrt/openwrt/pull/4733>
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-12-11 00:50:02 +01:00
Stan Grishin
ffab23d99d x86: add/improve support for Sophos SG/XG products
* Better product ID for Sophos SG/XG-105 models
* Add support for Sophos SG/XG-135 r1, r2 with/without wireless

Signed-off-by: Stan Grishin <stangri@melmac.ca>
[Changed subject to x86 - probably eaten somewhere, the PR had it]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-12-11 00:50:02 +01:00
Oldřich Jedlička
fd4ad6cae8 x86: added support to generate VHDX images
Added support to generate dynamic-sized VHDX images for Hyper-V.
Compile-tested on x86 and run-tested on Windows 10 21H2 (Hyper-V).

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
2021-12-05 18:49:14 +01:00
Alberto Bursi
ab1969d9a8 x86: sort alphabetically default packages
sorting alphabetically default packages
and placing them on their own line.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[fixed whitespaces before tab, double whitespaces]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-11-06 23:36:32 +01:00
Alberto Bursi
1f188d8c72 x86: enable kmod-tg3 on 64-bit by default
Gigabit ethernet adapters using BCM5719/5720 chipset
are common on servers and as easy/cheap to get as
Intel based ones.
Usually found in 2-port and 4-port cards.

Also some devices recently added to x86_64 target
like the Meraki MX100 use this chipset for 8 of
their 12 integrated ports.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2021-11-06 23:36:32 +01:00
Rui Salvaterra
3bd701d47c kernel: bump 5.10 to 5.10.73
Patches automatically refreshed.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-10-21 00:17:36 +02:00
Paul Spooren
e07cc46991 x86/64: enable MMIO_CMDLINE_DEVICES for firecracker support
This Kernel option allows to run OpenWrt witin a `firecracker` micro VM.

Firecracker is a KVM-based tool for superfast booting VMs on x86_64 and
aarch64. It makes rootfs available to the guest as a virtio-mmio device
and passes its address via the kernel cmdline. A kernel without
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES will not recognize the rootfs
virtio-mmio device.

Suggested-by: Packet Please <pktpls@systemli.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-12 19:22:19 -10:00
Christian Lamparter
80b7a8a7f5 Revert "gpio-cdev: add nu801 userspace driver"
This reverts commit f536f5ebdd.

As Hauke commented, this causes builder failures on 5.4 kernels.
This revert includes changes to the mx100 kernel modules
dependency as well as the uci led definitions.

Tested-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-10 23:15:05 +02:00
Chris Blake
fe9e5fbd75 x86: add support for Meraki MX100
This commit will add support for the Meraki MX100 in OpenWRT.

Specs:
* CPU: Intel Xeon E3-1200 Series 1.5GHz 2C/4T
* Memory: 4GB DDR3 1600 ECC
* Storage: 1GB USB NAND, 1TB SATA HDD
* Wireless: None
* Wired: 10x 1Gb RJ45, 2x 1Gb SFP

UART:
The UART header is named CONN11 and is found in the
center of the mainboard. The pinout from Pin 1 (marked
with a black triangle) to pin 4 is below:
Pin 1: VCC
Pin 2: TX
Pin 3: RX
Pin 4: GND
Note that VCC is not required for UART on this device.

Booting:
1. Flash/burn one of the images from this repo to a
flash drive.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Hook up UART to the MX100, plug in the USB drive,
and then power up the device.
4. At the BIOS prompt, quickly press F7 and then
scroll to the Save & Exit tab.
5. Scroll down to Boot Override, and select the
UEFI entry for your jumpdrive.

Note: UEFI booting will fail if the SATA cable for
the HDD is plugged in.
The issue is explained under the Flashing instructions.

Flashing:
1. Ensure the MX100 is powered down, and not plugged
into power.
2. Take the top off the MX100, and unplug the SATA
cable from the HDD.
3. Using the Mini USB female port found by the SATA
port on the motherboard,
flash one of the images to the system. Example:
`dd if=image of=/dev/sdb conv=fdatasync` where sdb
is the USB device for the MX100's NAND.
4. Unplug the Mini USB, hook up UART to the MX100,
and then power up the device.
5. At the BIOS prompt, quickly press F7 and then
scroll to the Boot tab.
6. Change the boot order and set UEFI: USB DISK 2.0
as first, and USB DISK 2.0 as second.
Disable the other boot options.
7. Go to Save & Exit, and then select Save Changes and
Reset

Note that OpenWRT will fail to boot in UEFI mode when
the SATA hard drive is plugged in. To fix this, boot
with the SATA disk unplugged and then run the following
command:
`sed -i "s|hd0,gpt1|hd1,gpt1|g" boot/grub/grub.cfg`
Once the above is ran, OpenWRT will boot when the HDD
is plugged into SATA. The reason this happens is the
UEFI implementation for the MX100 will always set
anything on SATA to HD0 instead of the onboard USB
storage, so we have to accomidate it since OpenWRT's
GRUB does not support detecting a boot disk via UUID.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-10-10 16:47:41 +02:00
Paul Spooren
eea90d2dff x86: remove obsolete Kernel 5.4
With the upgrade to Kernel 5.10 per default the old version is no longer
required to be in tree.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-10-02 18:13:46 +02:00
Moritz Warning
e2f284dbd1 x86: use device vendor/model variable
Remove use of DEVICE_TITLE in favor of the
DEVICE_VENDOR and DEVICE_MODEL as used by
all other targets.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
2021-09-23 21:45:13 -10:00
Paul Spooren
64be0eadc1 x86: switch to kernel 5.10
Seems to be working fine in QEMU and the wild.

Signed-off-by: Paul Spooren <mail@aparcar.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-09-08 13:29:43 -10:00
Rui Salvaterra
505b7a2d08 kernel: move two symbols to the generic kconfigs
CONFIG_RCU_{NEED_SEGCBLIST,STALL_COMMON} are set basically everywhere. Move them
to the generic kconfigs. And resort the generic kconfigs while at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-29 17:07:19 +02:00
John Audia
f25cebc43c kernel: bump 5.4 to 5.4.142
Removed upstreamed:
  hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
2021-08-21 15:59:39 +02:00
Rui Salvaterra
8408e0ff07 kernel: bump 5.10 to 5.10.60
No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-08-21 15:59:39 +02:00
David Bauer
1c9a9f7c7a treewide: add various missing config symbols
Fixes commit 91a52f22a1 ("treewide: backport support for nvmem on non platform devices")

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-08-10 20:22:59 +02:00
Daniel Golle
aaf1028296 x86: include kmod-fs-vfat by default in generic images
As x86/64 and x86/generic may be using UEFI, mounting the FAT-32 /boot
is necessary in order not to loose configuration files accross
sysupgrades. Include kmod-fs-vfat by default to make sure /boot can
always be mounted.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-07-20 04:11:05 +01:00
Edgar Su
df554e6fca x86: kernel: set NR_CPUS to 512
NR_CPUS limits the number of CPUs supported to 8. This makes total sense
on hardware-restircted platforms, but not on x86_64, where CPUs with
more than 8 cores can be easily acquired and with less physical limitaions.

see also: https://forum.openwrt.org/t/x86-64-8-cpu-limitation-on-vanilla-release/100946

Signed-off-by: Edgar Su <sjs333@outlook.com>
2021-07-18 03:04:53 -10:00
Chris Blake
82bec3364d x86: add upgrade support to diag.sh
Similar to how this is done in the diag.sh found in the base-files
package, we should blink our status LED (if we have one) during the
upgrade process. This follows the same blink pattern as seen at
./package/base-files/files/etc/diag.sh#L36

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2021-06-10 10:34:44 +02:00
Tomasz Maciej Nowak
09448d8ff3 x86: add Roqos Core RC10 ethernet interfaces
eth0 -> single NIC (i211at)
eth1 -> single NIC (i211at) -> 4-port unmanaged switch (BCM53125U)

Notes
UART is exposed on J4 connector, pinout starting from pin marked 1:
1. GND, 2. NC?, 3. NC?, 4. RX, 5. TX, 6. NC?
baud: 115200, parity: none, flow control: none
The board is setup by coreboot with UEFI. To enter setup screen hold
ESC key on boot.
The 5-LED multicolor matrix is attached on first I2C device named
"Synopsys DesignWare I2C adapter" at address 0x60. Controlling values
are stored in /opt/roqos/etc/rcLED.conf of original firmware.
Remember to backup the original firmware, there are no downloadable
copies.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2021-06-06 00:26:13 +02:00
Mark Carroll
8716dda074 x86: kernel: enable Fusion-MPT SAS driver
Compile in MPT SAS driver required to mount rootfs on some VMWare
systems (e.g. required for 1&1 IONOS).

Signed-off-by: Mark Carroll <git@markcarroll.net>
2021-06-06 00:26:13 +02:00
Rui Salvaterra
3326b5e75c treewide: switch the timer frequency to 100 Hz
Some targets select HZ=100, others HZ=250. There's no reason to select a higher
timer frequency (and 100 Hz are available in every architecture), so change all
targets to 100 Hz.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-04-21 10:31:10 +01:00
Chuanhong Guo
37958f0d11 x86: amd-xgbe: add missing dependencies on 5.10
fix the following build error when building with test kernel:

Package kmod-amd-xgbe is missing dependencies for the following libraries:
mdio_devres.ko

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2021-04-18 18:05:08 +08:00
Zheng Bao
1c4cd71109 x86/64: Add support for AMD SOC Ethernet controller
This feature is already supported in kernel. Add definition
and configuration in Makefile of OpenWRT.
It is tested on board Dibbler with processor V1605B.
Dmesg is as below.
--------------------------------------------
[    0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon
Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0)

[    8.227270] libphy: amd-xgbe-mii: probed
[    8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled
[    8.228999] libphy: amd-xgbe-mii: probed
[    8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled
.....
[   11.760869] br-lan: port 1(eth0) entered blocking state
[   11.761365] br-lan: port 1(eth0) entered disabled state
[   11.762019] device eth0 entered promiscuous mode
[   11.785285] 8021q: adding VLAN 0 to HW filter on device eth1
[   16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full -
flow control off
[   16.882108] br-lan: port 1(eth0) entered blocking state
[   16.882583] br-lan: port 1(eth0) entered forwarding state
[   16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
-----------------------------------------------

Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
2021-04-17 21:56:05 +02:00
Hauke Mehrtens
ebfc94aee9 kernel: Move CONFIG_USERIO to generic config
The CONFIG_USERIO option is unset in multiple target configurations. On
the sunxi target it is activated. Move the kernel configuration option
to the generic kernel configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-27 14:34:22 +01:00
Stan Grishin
64eaf633ff x86/base-files: add support for Sophos SG/XG-105
This adds detection of the Sophos SG-105 and Sophos XG-105 models
and assignment of ethernet ports these models have to LAN/WAN.

Signed-off-by: Stan Grishin <stangri@melmac.net>
2021-03-26 09:15:38 -10:00
Kevin Darbyshire-Bryant
22d2c972c4 kernel: drop apu2 reboot patch
This patch really annoys me, either it needs to go upstream or be
dropped, so it's going to be dropped here.

Checking drivers/platform/x86/pcengines-apuv2.c it also appears to be
incomplete since it mentions different dmi board names depending on bios
version.

/* APU2 w/ legacy BIOS < 4.0.8 */ is 'APU2'
/* APU2 w/ legacy BIOS >= 4.0.8 */ is 'apu2'
/* APU2 w/ mainline BIOS */ is 'PC Engines apu2'

So the patch, if applicable at all, only 'works' for legacy BIOS >=
4.0.8

My APU2 on mainline BIOS reboots fine without this patch.  So let's see
if anyone screams and when they do question why legacy bios.  If patch
DOES need to be re-introduced then it needs to go upstream first.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-03-24 11:51:29 +00:00
Kevin Darbyshire-Bryant
eb964298b3 kernel: bump 5.10 to 5.10.24
Straightforward refresh of patches using update_kernel.

Run tested: x86_64 (apu2)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-03-24 11:36:31 +00:00
Tony Ambardar
9662da770e kernel: add missing config symbols, fix typos
Update 5.10 generic config to add missing options prompting during builds,
when setting CONFIG_ALL_KMODS. Refresh the x86 subtargets to drop symbols
added to the generic config.

Also fix a typo in 5.4/5.10 generic configs: "CONFIG_CONFIG_KVM_AMD_SEV".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-19 14:02:47 +00:00
Aleksander Jan Bajkowski
12e942b1fd kernel: move some disabled symbols to generic
Move some disabled symbols found in armvirt target to generic.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2021-03-19 00:59:22 +01:00
Tony Ambardar
662ceebc4c x86/legacy: fix subtarget CPU for kernel 5.10
The 5.10 target config defined a baseline i686 CPU aligned to the 32-bit
generic subtarget. However, the legacy subtarget arch wasn't set to the
older 586MMX, defaulting instead to the i686.

Explicitly set the subtarget arch and refresh the subtarget config, as done
already with the old geode subtarget.

Fixes: 8391781389 ("x86: support kernel 5.10")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-03-15 19:12:03 -07:00
Tony Ambardar
8391781389 x86: support kernel 5.10
Add linux 5.10 as testing kernel, copy generic/subtarget configs and target
patches from 5.4.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: update target patches for kernel 5.10

Refresh all patches while also dropping:
    800-hwmon-w83627ehf-dont-claim-nct677x.patch

which is now upstreamed as:
    3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support")

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: refresh 5.10 target config

Refresh config using "make kernel_oldconfig".

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>

x86: refresh and test all subtarget configs

Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget".

Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic.
Build-tested only: x86/geode.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[squashed commits]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2021-03-14 17:52:49 +00:00
John Audia
e7fa97b326 kernel: bump 5.4 to 5.4.105
Ran update_kernel.sh in a fresh clone without any existing toolchains.

Removed upstreamed generic-backports:
  830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
  831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch
  755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
[squash patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-13 17:06:35 +01:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Alberto Bursi
788ec9a7cf x86: add support for AWS T3 instances
Amazon AWS T3 cloud instances require kernel support
for the Elastic Fabric Adapter to access storage
and for Elastic Network Adapter to use network
interfaces.

Since the Fabric Adapter is needed to access
root filesystem, enable in x86_64 kernel.

Elastic Network Adapter goes in a module,
and add this module to default list in x86_64.
The module is set to AutoLoad because AutoProbe does
not seem to load it.

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
2021-03-01 00:34:23 +01:00
Andreas Eberlein
a3e6521c1a x86: add led driver for PC Engines APU1
This driver adds the LED support for the PC Engines APU1.
This integrates the Linux kernel driver and includes a patch to support
 newer firmware versions. Also the default LED configuration is updated
 to use the correct devices.

Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
2021-02-20 00:29:18 -10:00
Adrian Schmutzler
598b29585e target: use SPDX license identifiers on Makefiles
Use SPDX license tags to allow machines to check licenses.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 15:47:18 +01:00
Tony Ambardar
0faa172356 config: limit CONFIG_PERF_EVENTS to top-level generic configs
Remove redundant target-level settings.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2021-01-25 14:37:41 +01:00
Adrian Schmutzler
29167cbca3 x86: fix upgrade by emptying SUPPORTED_DEVICES
x86 uses append-metadata, but only for signing and not for the
metadata itself.

Since recently SUPPORTED_DEVICES was assigned with a global value
and is not empty anymore, append-metadata will now actually put
metadata into x86 images. This breaks sysupgrade on x86.

To fix it for the moment, let's just empty SUPPORTED_DEVICES for
this target again.

In the long term, one should either not add metadata to the images
if it is not desired, and/or remove the unintended fwtool check.

Fixes: f52081bcf9 ("treewide: provide global default for SUPPORTED_DEVICES")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-01-23 23:42:47 +01:00
Sungbo Eo
583e39e3d5 kernel: drop empty kmod-ledtrig-* packages
The following four led triggers are enabled in generic config.

* kmod-ledtrig-default-on
* kmod-ledtrig-heartbeat
* kmod-ledtrig-netdev
* kmod-ledtrig-timer

Drop the packages and remove them from DEVICE_PACKAGES.
There's no other package depending on them in this repo.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-15 18:24:31 +01:00
Mengyang Li
9c13513ce1 x86: enable CONFIG_MMC_SDHCI_ACPI for x86_64
Some x86_64 single board computer (including Atomic Pi)
has onboard emmc, but requires CONFIG_MMC_SDHCI_ACPI driver
to use or boot from it.

Here is boot message for the mmc device

[    2.838008] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.857536] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    2.950019] mmc0: new HS200 MMC card at address 0001
[    3.158271] mmcblk0: mmc0:0001 M52516 14.6 GiB
[    3.170290] mmcblk0boot0: mmc0:0001 M52516 partition 1 4.00 MiB
[    3.177191] mmcblk0boot1: mmc0:0001 M52516 partition 2 4.00 MiB
[    3.183963] mmcblk0rpmb: mmc0:0001 M52516 partition 3 4.00 MiB, \
chardev (248:0)

Other lines changed in this config file are introduced by menuconfig.

Signed-off-by: Mengyang Li <mayli.he@gmail.com>
2020-12-03 23:51:07 -10:00
Alberto Bursi
ccddc3470c x86: generic: disable CONFIG_EFI_VARS
CONFIG_EFI_VARS has been disabled in 
64bit x86 target in 2018 by the following commit
b0a51dab8c
the same reasons apply to Generic target, so
now it's disabled here too.
Leaving it enabled is also blocking compile as 
a new symbol was added
EFI_CUSTOM_SSDT_OVERLAYS 
that depends from CONFIG_EFI_VARS
and the build system stops and waits for
user input on what to do about it.

The Legacy and Geode targets never
had any EFI_xxx configs enabled so they 
don't have this issue

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
2020-11-12 18:21:55 +01:00
Yousong Zhou
c02096361c x86: upgrade: make code comment appear as log lines
The comment content can be useful for readers of both the log and code

Previously when dd command "records in/out" messages are not filtered
like now with get_image_dd, it's not clear that these messages are for
extracting boot sectors.  E.g.

Before

  == upgrade: Reading partition table from bootdisk...
  37+26 records in
  37+26 records out
  == upgrade: Reading partition table from image...

After

  == upgrade: Reading partition table from bootdisk...
  == upgrade: Extract boot sector from the image
  37+26 records in
  37+26 records out
  == upgrade: Reading partition table from image...

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-11-11 21:29:55 +08:00
Yousong Zhou
2e34cfbca7 x86: upgrade: use get_image_dd
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140
Reported-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Reviewed-By: Philip Prindeville <philipp@redfish-solutions.com>
2020-11-11 21:29:55 +08:00
Yousong Zhou
31a34076ed x86: upgrade: use v function for writting logs
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-11-11 21:29:55 +08:00
Yousong Zhou
bd0b820068 x86: fix touching bootloader "upgraded" mark
The mount point is "/tmp/boot", the path in the boot partition is
"/boot/grub/upgraded".

Origin of this mark b9c1cf16 ("x86: add preinit hook for bootloader
upgrade")

Fixes 32f675ca ("x86: fix grub-bios-setup fail during sysupgrade")

Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140
Reported-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-11-02 21:09:22 +08:00
Adrian Schmutzler
2785126650 kernel: remove support for kernel 4.19
We use 5.4 on all targets by default, and 4.19 has never been released
in a stable version. There is no reason to keep it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-30 19:29:59 +01:00
Hauke Mehrtens
722906d144 kernel: move CONFIG_F2FS_CHECK_FS to generic kernel config
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Hauke Mehrtens
6542615e41 kernel: Move CONFIG_F2FS_FS_SECURITY to generic kernel config
Move the CONFIG_F2FS_FS_SECURITY kernel configuration option to the
generic kernel configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-11 16:38:16 +02:00
Daniel Golle
5423d9d27e kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic
Similar to how it was already done for other filesystems' *_FS_XATTR
kernel config symbols, also move CONFIG_F2FS_FS_XATTR=y and
CONFIG_F2FS_STAT_FS=y to target/linux/generic.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-09 23:20:19 +01:00
Paul Spooren
0f5b5cf730 kernel: clean up XATTR config symbols
Extended attributes are required for overlayfs and have hence been long
ago enabled for jffs2, but should be enabled unconditionally for all
other filesystems which may potentially serve as overlayfs' upper
directory. Previously it was inconsistently added in multiple targets.
Add symbols to generic kernel config and remove all *_XATTR symbols
from target configs.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[keep things as they are for squashfs, improve commit message]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-10-09 01:49:22 +01:00
John Audia
2c2fcbd2e0 kernel: bump 5.4 to 5.4.63
Manually merged:
 hack-5.4
  230-openwrt_lzma_options.patch
 bcm27xx
  950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
 x86
  011-tune_lzma_options.patch

Remove upstreamed patches in collaboration with Ansuel Smith:
 ipq806x
  093-1-v5.8-ipq806x-PCI-qcom-Add-missing-ipq806x-clocks-in-PCIe-driver.patch
  093-2-v5.8-ipq806x-PCI-qcom-Change-duplicate-PCI-reset-to-phy-reset.patch
  093-3-v5.8-ipq806x-PCI-qcom-Add-missing-reset-for-ipq806x.patch

All other modifications made by update_kernel.sh

Build-tested: bcm27xx/bcm2708, ipq806x, x86/64
Run-tested: ipq806x (R7800), x86/64

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[update commit message/tested]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-06 19:55:19 +02:00
Adrian Schmutzler
cc501ab021 kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627
For many target we have added CONFIG_WATCHDOG_CORE=y to the target
config due to the following error:

 Package kmod-hwmon-sch5627 is missing dependencies for the following
 libraries:
 watchdog.ko

However, actually the proper way appears to be setting the
dependency for the kmod-hwmon-sch5627 package, as the error message
demands.

Do this in this patch and remove the target config entries added
due to this issue.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-24 14:09:11 +02:00
Hauke Mehrtens
b35c54227b kernel: Move CONFIG_IONIC to generic kernel config
It is deactivated everywhere, just set this in the generic config.

Acked-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-08-10 23:58:58 +02:00
Daniel Golle
728a0c68d1 Revert "procd: update to git HEAD"
This reverts commit e0e607f0d0.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-06 16:17:37 +01:00
Daniel Golle
e0e607f0d0 procd: update to git HEAD
47a9f0d service: add method to query available container features
 afbaba9 initd: attempt to mount cgroup2
 ead60fe jail: use pidns semantics also for timens
 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits
 83053b6 instance: add instances into unified cgroup hierarchy
 16159bb jail: parse OCI cgroups resources

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-06 15:27:51 +01:00
Felix Fietkau
b0f7ea2853 kernel: unify CONFIG_GPIO_SYSFS in kernel configs
Enable it for all platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-06 12:37:04 +02:00
Matthew Gyurgyik
bb14d44039 kernel/pcengines-apu2: detect apuv4 board
Upstream commit 3d00da1de3 ("platform/x86: pcengines-apuv2: detect apuv4
board")

On 5.4, this module fails on APUv4 due to non-matching DMI data. With this
patch, the module will match DMI data for the APUv4.

Signed-off-by: Matthew Gyurgyik <matthew@gyurgyik.io>
[include upstream patch description]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-07-06 17:57:33 +02:00
Hauke Mehrtens
6062d85892 kernel: Update kernel 4.19 to version 4.19.131
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Run tested: ath79
Build tested: ath79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Gregory L. Dietsche
f3cb1636ab x86: Support Intel 10 Gigabit Ethernet Cards
Support Intel 10 Gigabit Ethernet Cards in x86/64 images by default.
This ensures that systems with cards such as the Intel x520 will work properly.

Signed-off-by: Gregory L. Dietsche <Gregory.Dietsche@cuw.edu>
2020-06-27 00:19:05 +02:00
Florian Eckert
f3c5c09e5a kernel: add pcengines-apu2 module description
Add a module description for the new pcengnies-apu2 device driver.
This driver supports the front button and LEDs on the PC Engines
APUv2/APUv3 boards.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2020-06-26 20:54:53 +02:00
Petr Štetiar
472b8fc91b armvirt,x86: fix build breakage of crypto ccp module
Upstream in commit f9f8f0c24203 ("crypto: ccp -- don't "select"
CONFIG_DMADEVICES") removed dependency on CONFIG_DMADEVICES symbol which
leads to build breakage of ccp crypto module, so fix this by adding that
symbol back in the kernel config.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-23 09:29:00 +02:00
Petr Štetiar
e44e60b290 kernel: bump 5.4 to 5.4.48
Resolved merge conflict in the following patches:

 layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch
 ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch

Refreshed patches, removed upstreamed patch:

 bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch

Run tested: qemu-x86-64
Build tested: x86/64

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-22 12:51:22 +02:00
Adrian Schmutzler
48c1fdd046 treewide: drop shebang from non-executable target files
This drops the shebang from all target files for /lib and
/etc/uci-defaults folders, as these are sourced and the shebang
is useless.

While at it, fix the executable flag on a few of these files.

This does not touch ar71xx, as this target is just used for
backporting now and applying cosmetic changes would just complicate
things.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-16 14:26:33 +02:00
Adrian Schmutzler
bb39fea11a treewide: simplify inclusion of subtarget image files
Many target use a repetitive if-include scheme for their subtarget
image files, though their names are consistent with the subtarget
names.

This patch removes these redundant conditions and just uses the
variable for the include where the target setup allows it.

For sunxi, this includes a trivial rename of the subtarget image
Makefiles.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-11 01:44:13 +02:00
Florian Eckert
0b3e1205df kernel: add gpio-it87
Since commit 910df3f06c we have build in
on all X86/64 platforms the gpio-it87 driver.

Since this change I am getting the following error message on boot.
 > kern.err kernel: [    1.009416] gpio_it87: no device

I do not have this device on my system. To prevent the nonsensical
message and the loading of the module I have added this as a package, so
that it can be installed later or during image building.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2020-06-03 16:49:28 +02:00
Alberto Bursi
dc7cc60ca3 x86: fix generic kernel 5.4 config
The last kernel update done with commit 500a02bc29 ("x86: Update
configuration") placed most of the updated config only in the x86_64
target.

Move the options needed by the other targets too in the x86 base config,
and add an additional option needed by those targets.

Fixes: 500a02bc29 ("x86: Update configuration")
Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
[commit subject/description tweaks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-05-20 15:26:22 +02:00
Petr Štetiar
97d86426e2 x86: fix unusable squashfs images by adding missing padding
It was reported, that after image generation rework
x86-64-generic-squashfs-rootfs.img image won't boot on XenServer x86_64
anymore:

 F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x84289960)
 F2FS-fs (xvda): Can't find valid F2FS filesystem in 1th superblock
 F2FS-fs (xvda): Magic Mismatch, valid(0xf2f52010) - read(0x4e8ee223)
 F2FS-fs (xvda): Can't find valid F2FS filesystem in 2th superblock
 List of all partitions:
 ca00            4207 xvda
  driver: vbd
 No filesystem could mount root, tried:
  ext3
  ext2
  ext4
  squashfs
  iso9660
  f2fs

 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(202,0)

So lets fix this by adding back padding which was introduced in commit
a17d9482f5 ("x86: image: fix small disk space in squashfs overlay").

Ref: FS#3036
Fixes: 258f070d1a ("x86: fix missing squashfs and ext4 rootfs images")
Fixes: cb007a7bf6 ("x86: switch image generation to new code")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-26 12:53:27 +02:00
Daniel Golle
be6543c539 x86: really remove packages already enabled in kconfig
This commit really removes packages in geode profiles already enabled
in kernel config.

Fixes: 9c23ecee57 ("x86: move packages selection to profiles")
Reported-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-04-20 19:24:18 +01:00
Tomasz Maciej Nowak
9c23ecee57 x86: move packages selection to profiles
This can be rather confusing for contributors, since there are three
layers in which they can be added. As for now there are none profiles
other than generic (exception: geos) let's move them to these profiles.
Being here this commit also removes packages in geode profiles already
enabled in kernel config.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-04-20 18:55:30 +01:00
Tomasz Maciej Nowak
eca6946447 x86: select kmod-button-hotplug by default
This package is useful by all subtargets, therefore move it to default
packages selection.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-04-20 18:55:30 +01:00