Commit Graph

19123 Commits

Author SHA1 Message Date
Thibaut VARÈNE
a05dcb0724 ath79: add support for Yuncore A930
Specification:

- QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR
- 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN)
- 2T2R 802.11b/g/n 2.4GHz

Flash instructions:

If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):

  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
  sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin

In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:

1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
   'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
   seconds, recovery mode should start downloading image from server
   (unfortunately, there is no visible indication that recovery got
   enabled - in case of problems check TFTP server logs)

Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2022-04-15 07:11:18 +02:00
Thibaut VARÈNE
f9ff282d17 mac80211 adjust QCA9561 PA bias
ath9k is setting the TX PA DC bias level different on QCA9561 and QCA9565
although they have the same radio IP-core, which results in a very low
output power and very low throughput as devices are further away from
the AP (compared to other 2.4GHz APs.)

In real life testing, without this patch the 2.4GHz throughput on Yuncore
XD3200 is around 10Mbps sitting close to the AP, and close to theoretical
maximum with the patch applied.

Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
[edit commit message]
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2022-04-15 07:11:18 +02:00
Thibaut VARÈNE
c91df224f5 ath79: add support for Yuncore XD3200
Specification:

- QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR
- 2T2R 802.11b/g/n 2.4GHz
- 2T2R 802.11n/ac 5GHz
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)

LED for 5 GHz WLAN is currently not supported as it is connected directly
to the QCA9882 radio chip.

Flash instructions:

If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):

  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
  sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin

In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:

1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
   'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
   seconds, recovery mode should start downloading image from server
   (unfortunately, there is no visible indication that recovery got
   enabled - in case of problems check TFTP server logs)

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2022-04-15 07:11:18 +02:00
Petr Štetiar
afb0e9336e kernel: usb-net-asix: fix 5.15 dependency
Upstream in commit 34a1dee6bc44 ("net: usb: asix: ax88772: add generic
selftest support") in version 5.14 added dependency on generic selftest
functionality and armvirt/64 when compiled with ALL_KMODS=y reports following:

 Package kmod-usb-net-asix is missing dependencies for the following libraries:
 mdio_devres.ko
 selftests.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-04-15 07:11:18 +02:00
Petr Štetiar
8361946e1b kernel: netdevices: add generic selftests module
Upstream in commit 3e1e58d64c3d ("net: add generic selftest support") in
version 5.13 added generic selftests module and usb-net-asix already
depends on it, in version 5.18 via commit 1710b52d7c13 ("net: usb:
smsc95xx: add generic selftest support") it will be used by
usb-net-smsc95xx as well.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-04-15 07:11:18 +02:00
Petr Štetiar
0225469dcd kernel: usb-net-smsc95xx: fix 5.15 dependency
armvirt/64 when compiled with ALL_KMODS=y reports following:

 Package kmod-usb-net-smsc95xx is missing dependencies for the following libraries:
 libphy.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-04-15 07:11:18 +02:00
Petr Štetiar
0fa0a19a60 kernel: mdio-devres: fix of-mdio dependency
armvirt/64 when compiled with ALL_KMODS=y reports following:

 Package kmod-mdio-devres is missing dependencies for the following libraries:
 of_mdio.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-04-15 07:11:18 +02:00
Petr Štetiar
c707731310 kernel: of-mdio: fix 5.15 fwnode_mdio dependency
Upstream in commit bc1bee3b87ee ("net: mdiobus: Introduce
fwnode_mdiobus_register_phy()") in version 5.14 introduced new
dependency:

 Package kmod-of-mdio is missing dependencies for the following libraries:

  fwnode_mdio.ko

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-04-15 07:11:18 +02:00
Jason A. Donenfeld
a001630a1a urandom-seed: go back to seeding with shell script temporarily
This reverts commit 2edc017a6e.

We shouldn't be using a shell script here, but the SeedRNG integration
into OpenWRT requires a bit more thought. Etienne raised some important
points immediately after this was merged and planned to send some follow
up commits, but became busy with other things. The points he raised are
important enough that we should actually back this out until it's ready
to go, and then merge it as a cohesive unit. So let's revert this for
now, and come back to it later on.

Cc: Etienne Champetier <champetier.etienne@gmail.com>
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-14 10:12:34 +02:00
Daniel Golle
c5f113c43f
netifd: relax check in dhcp proto handler
Checking whether /sbin/udhcpc is a symbolic link breaks using the
DHCP proto handler inside procd-ujail where bind-mounts are used for
the resolved link. Check whether /sbin/udhcpc is executable instead
to allow using the proto handler for DHCP-provisioned containers.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-13 19:51:00 +01:00
Daniel Golle
2c8873033e
procd: update to git HEAD
6343c3a procd: completely remove tmp-on-zram support
 5c5e63f uxc: fix potential NULL-pointer dereference
 eb03f03 jail: include necessary files for per-netns netifd instance

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-13 19:50:55 +01:00
Daniel Golle
0dbca1b2ba
base-files: more robust sysupgrade on NAND
Make sure sysupgrade on NAND also works in case of UBI volumes having
index >9. While at it, also make sure UBI device is detected and abort
in case it isn't. Use Shell built-in shorthand ':' instead of 'true'.

Fixes #9708
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-13 19:50:45 +01:00
Rui Salvaterra
435d7a052b firewall3: bump to latest git HEAD
4cd7d4f Revert "firewall3: support table load on access on Linux 5.15+"
50979cc firewall3: remove unnecessary fw3_has_table

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-04-13 17:08:17 +01:00
Jo-Philipp Wich
bea01fa57f netfilter: move nf-log modules into separate packages
Both legacy iptables and nftables require nf-log modules for rule logging,
so move them into a separate package both firewall implementations can
depend on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-04-12 14:02:16 +02:00
Felix Fietkau
5d5afd5177 mac80211: backport minstrel_ht fix for legacy rates
Fixes OFDM rates on 5 GHz

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-12 09:33:22 +02:00
Eneas U de Queiroz
1135b75d1f nftables: add CONFLICT between versions
Have nftables-json conflict with nftables-nojson.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-04-11 21:41:03 +02:00
Eneas U de Queiroz
e89f3e85eb wolfssl: bump to 5.2.0
Fixes two high-severity vulnerabilities:

- CVE-2022-25640: A TLS v1.3 server who requires mutual authentication
  can be bypassed.  If a malicious client does not send the
  certificate_verify message a client can connect without presenting a
  certificate even if the server requires one.

- CVE-2022-25638: A TLS v1.3 client attempting to authenticate a TLS
  v1.3 server can have its certificate heck bypassed. If the sig_algo in
  the certificate_verify message is different than the certificate
  message checking may be bypassed.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2022-04-11 21:41:03 +02:00
Hauke Mehrtens
3aa96efa24 mac80211: Update to version 5.15.33-1
This updates mac80211 to version 5.15.33-1 which is based on kernel
5.15.33.
The removed patches were applied upstream.

This new release contains many fixes which were merged into the upstream
Linux kernel.
This also contains the following new drivers which are needed for ath11k:
* net/qrtr/
* drivers/bus/mhi/

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-04-10 23:12:36 +02:00
Daniel Golle
dffad93d3e
arm-trusted-firmware-mediatek: remove no longer needed Configure step
As anyway only the default is called now we can as well also just remove
the override for Build/Configure.

Fixes: e2cffbb805 ("arm-trusted-firmware-mediatek: update to 2021-03-10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-09 22:24:42 +01:00
Robert Marko
6461384c1e mwlwifi: fix 5.15 kernel support
Fix compilation and usage under kernel 5.15 for the mwlwifi driver.

For detailed description of changes, check individual patches.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2022-04-09 19:31:46 +02:00
Konstantin Demin
65256aee23 dropbear: bump to 2022.82
- update dropbear to latest stable 2022.82;
  for the changes see https://matt.ucc.asn.au/dropbear/CHANGES
- use $(AUTORELEASE) in PKG_RELEASE
- use https for all uris
- refresh all patches
- rewrite patches:
  - 100-pubkey_path.patch
  - 130-ssh_ignore_x_args.patch

binary/pkg size changes:
- ath79/generic, mips:
  - binary: 215112 -> 219228 (+4116)
  - pkg: 111914 -> 113404 (+1490)
- ath79/tiny, mips:
  - binary: 172501 -> 172485 (-16)
  - pkg: 89871 -> 90904 (+1033)

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
2022-04-09 19:31:31 +02:00
Nick Hainke
c3b7389339 libmnl: update to 1.0.5
Changes:

Duncan Roe (5):
      nlmsg: Fix a missing doxygen section trailer
      build: doc: "make" builds & installs a full set of man pages
      build: doc: get rid of the need for manual updating of Makefile
      build: If doxygen is not available, be sure to report "doxygen: no" to ./configure
      src: doc: Fix messed-up Netlink message batch diagram

Fernando Fernandez Mancera (1):
      src: fix doxygen function documentation

Florian Westphal (1):
      libmnl: zero attribute padding

Guillaume Nault (1):
      callback: mark cb_ctl_array 'const' in mnl_cb_run2()

Kylie McClain (1):
      examples: nfct-daemon: Fix test building on musl libc

Laura Garcia Liebana (4):
      examples: add arp cache dump example
      examples: fix neigh max attributes
      examples: fix print line format
      examples: reduce LOCs during neigh attributes validation

Pablo Neira Ayuso (3):
      doxygen: remove EXPORT_SYMBOL from the output
      include: add MNL_SOCKET_DUMP_SIZE definition
      build: libmnl 1.0.5 release

Petr Vorel (1):
      examples: Add rtnl-addr-add.c

Stephen Hemminger (1):
      examples: rtnl-addr-dump: fix typo

igo95862 (1):
      doxygen: Fixed link to the git source tree on the website.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-04-09 18:34:04 +02:00
Nick Hainke
aecf088b37 libnfnetlink: update to 1.0.2
Changes:

c63f193 bump version to 1.0.2
3cffa84 libnfnetlink: Check getsockname() return code
90ba679 include: Silence gcc warning in linux_list.h
bb4f6c8 Make it clear that this library is deprecated
e46569c Minimally resurrect doxygen documentation
5087de4 libnfnetlink: hide private symbols
62ca426 autogen: don't convert __u16 to u_int16_t
efa1d8e src: Use stdint types everywhere
7a1a07c include: Sync with kernel headers
7633f0c libnfnetlink: initialize attribute padding to resolve valgrind warnings
94b68f3 configure: uclinux is also linux
617fe82 src: get source code license header in sync with current licensing terms
97a3960 build: resolve automake-1.12 warnings

Removed the patch 100-missing_include.patch, libnfnetlink compiles fine
with musl without this patch.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-04-09 18:33:24 +02:00
Andrey Erokhin
1e991e09b7 gpio-button-hotplug: fix data race
bh_event_add_var can be called by multiple threads concurrently,
so it shall not use a static char buffer

Signed-off-by: Andrey Erokhin <a.erokhin@inango-systems.com>
2022-04-09 15:56:04 +02:00
Felix Fietkau
0392644083 qosify: update to the latest version
92f5e18675bf interface: fix ifname present check in interface status
ef82defaae26 ubus: add active devices to bridger blacklist

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-08 13:07:47 +02:00
Jo-Philipp Wich
1a35ac9990 firewall4: update to latest Git HEAD
a378883 fw4: fix emitting family specific redirect rules without any addrs
11feddf fw4: bracketize IPv6 addresses in dnat addr:port notation
9972f7d fw4: ensure to capitalize weekday names
fde8070 treewide: forward compatibility changes

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-04-08 10:45:46 +02:00
Jo-Philipp Wich
cef3e6a69c ucode: update to latest Git HEAD
33f1e0b treewide: move json-c compat shims into internal header file
e0e9431 vm: move unhandled exception reporting out of `uc_vm_execute_chunk()`
2b59140 vm: fix callframe double free on unhanded exceptions
7d7e950 main: abort when failing to load a preload library
1032a67 lib: let `json()` accept input objects implementing `read()` method
5ee68d5 fs: implement `fs.readfile()` and `fs.writefile()`
df6b861 ci: debian: change path before attempting to invoke Git operations
dfaf05a ci: debian: automatically update changelog from Git tag
34f3c45 ci: fix YAML syntax of Debian workflow
e956bcf fs: fix off-by-one in fs.dirname() function
6fc4b6c .gitignore: fix overmatching patterns, blacklist cram .venv
7c2e082 build: remove legacy json-c check
77942af build: add polyfills for older libjson-c versions
0b4aaa3 CI: build Debian package
f404285 debian: Add package definition
a37f654 types: fix escape sequence encoding of high byte values in JSON strings
aae5312 Update README.md
8134e25 build: fix symlink install target
87c7296 treewide: replace some leftover "utpl" occurrences, update .gitignore
7d27ad5 build: only stage ucc symlink if compile support is enabled
171402f lib: add date and time related functions
8b5dc60 lib: provide API function to obtain stdlib function implementations
eb0d2f1 main: turn ucode into multicall executable
28ee7e1 uloop: add support for tasks
753dea9 CI: build on macOS
668c5c0 lib: add argument position support (`%m$`) to `sprintf()` and `printf()`
ab46fdf treewide: remove legacy json-c include directives
b8f49b1 tests: 21_regex_literals: generalize syntax error test case
fd2e5e7 tests: 16_sort: fix logic flaw exposed on OS X
2c71bf2 tests: run_tests.sh: pass dummy value to `-T` flag
55c4a90 lib: disallow zero padding for %s formats
0d05cb5 tests: run_tests.sh: use greadlink if available
271e520 resolv: make OS X compatible
d13c320 fs: avoid Linux specific sys/sysmacros.h include on OS X
33397a3 uloop: use execvp() on OS X
bafdc8f lib: add naive sigtimedwait() stub for OS X
ada1585 build: consolidate CMakeLists.txt and cover OS X deviations
befbb69 include: add OS X compatible endian.h header
49838a8 include: rename include guards to avoid clashes with system headers
91f65de nl80211: add missing attributes and correct some attribute flags
b4a1fd5 lib: adjust require(), render() and include() raw mode semantics
4618807 main: rework CLI frontend
73dcd78 lib: fix potential integer underflow on empty render output
c402551 vm: fix crash on object literals with non-string computed properties
efe8a02 syntax: support add new operators
078d686 ubus: add event support
6c66c83 ubus: refactor error and argument handling
1cb04f9 ubus: add object publishing, notify and subscribe support
0e85974 uloop: clear errno before integer conversion attempts
05bd7ed types: treat resource type prototypes as GC roots
a2a26ca lib: introduce uloop binding
6b6d01f vm: release this context on exception in managed method call
1af23a9 tests: fix proto() testcase
4ce69a8 fs: implement access(), mkstemp(), file.flush() and proc.flush()

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2022-04-08 10:45:46 +02:00
David Bauer
f6445cfa1a hostapd: add ubus link-measurements notifications
Notify external ubus subscribers of received link-measurement reports.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:29 +02:00
David Bauer
965aa33a18 hostapd: add ubus method for requesting link measurements
Add a ubus method to request link-measurements from connected STAs.

In addition to the STAs address, the used and maximum transmit power can
be provided by the external process for the link-measurement. If they
are not provided, 0 is used as the default value.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:18 +02:00
David Bauer
2ca5c3da04 hostapd: add support for enabling link measurements
Allow external processes to enable advertisement of link-measurement RRM
capability.

Signed-off-by: David Bauer <mail@david-bauer.net>
2022-04-08 01:19:10 +02:00
Felix Fietkau
fd354ffac9 mt76: update to the latest version
5beb87716e70 mt76: dma: add wrapper macro for accessing queue registers
e0bc736d5617 mt76: add support for overriding the device used for DMA mapping
b8c842daa081 mt76: make number of tokens configurable dynamically
87a962e0608f mt76: mt7915: add Wireless Ethernet Dispatch support
2accb74e6be3 mt76: mt7915: fix using null pointer when wfsys on
e5227f2f3120 mt76: mt7921: Fix the error handling path of mt7921_pci_probe()
ec0e9f4da32f mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup
5a87be892ba7 mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector
fe441e5d3dcf mt76: mt7915: do not pass data pointer to mt7915_mcu_muru_debug_set
f3ddfe886283 mt76: mt7915: report rx mode value in mt7915_mac_fill_rx_rate
2a0d370cb5fe mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_mask
506bb0605e3e mt76: mt7921: Add AP mode support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-07 12:24:59 +02:00
Felix Fietkau
4ec10da2fe ubox: add example /etc/modules.conf + conffiles entry
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-07 12:01:56 +02:00
Piotr Dymacz
0892fd9920 uboot-imx: build 'u-boot-dtb.img' for SolidRun CuBox-i
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-04-07 09:58:44 +02:00
Piotr Dymacz
e213375894 uboot-imx: bump to 2022.01 release
Two patches were removed because of the changes introduced in upstream:

1. 110-mx6cuboxi-mmc-fallback.patch
Looks like similar changes were introduced in 6c3fbf3e456c ("mx6cuboxi:
customize board_boot_order to access eMMC").

2. 111-mx6cuboxi_defconfig-force-mmc-boot.patch
The 'CONFIG_SPL_FORCE_MMC_BOOT' was removed in 15aec318ef03 ("Revert
"imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon
mode").

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-04-07 09:58:44 +02:00
Daniel Golle
0d3850dc5a
libselinux: add missing host-build dependency on libsepol/host
The host-build of libselinux requires libsepol/host.
Add the libsepol/host to HOST_BUILD_DEPENDS to allow build on hosts
which don't have libsepol installed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-06 21:54:50 +01:00
Valentyn Datsko
76f55e3c3f
dnsmasq: add procd interface index tracking
Problem exist when dnsmasq is exclusively bind to particular interface.
After reconfiguring or restarting this interface, its index changes, but
dnsmasq uses the old one. When this problem occurs, dnsmasq does not
listen on the correct interface so DHCP does not work, and clients do not
get an IP address. Procd netdev param can be added to restart dnsmasq when
the interface index is changed.

Signed-off-by: Valentyn Datsko <valikk.d@gmail.com>
[combined into a single &&-connected statement]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-06 17:32:42 +01:00
Felix Fietkau
64f629e207 bridger: add bridge forwarding accelerator
This package uses BPF to create a fast path which improves bridging performance
by bypassing the bridge layer. It also supports creating tc offload rules for
hardware that supports it.
Hardware offload support can be used with MT7622 + MT7915 once it is merged

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-06 14:13:26 +02:00
Felix Fietkau
c38b2c5f16 qosify: update to the latest version
Replace the tc-full dependency with tc + libnl-tiny

1cd5e12eecdc loader/interface: attach bpf program directly using netlink

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-05 21:28:32 +02:00
Felix Fietkau
0b98a55ad6 ubox: update to the latest version
b87a4fdca634 kmodloader: support loading module options and blacklist from /etc/modules.conf

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-05 21:28:32 +02:00
Koen Vandeputte
6af46796fa kernel: package mhi mbim driver
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Koen Vandeputte
2519190fec kernel: package mhi wwan ctrl driver
MHI WWAN CTRL allows QCOM-based PCIe modems to expose different modem
control protocols/ports to userspace, including AT, MBIM, QMI, DIAG
and FIREHOSE. These protocols can be accessed directly from userspace
(e.g. AT commands) or via libraries/tools (e.g. libmbim, libqmi, libqcdm)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Koen Vandeputte
de840a5e01 kernel: package mhi network driver
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Koen Vandeputte
8da3de825a kernel: package mhi pci driver
This driver provides MHI PCI controller driver for devices
such as Qualcomm SDX55 based PCIe modems

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Koen Vandeputte
120e2d91dc kernel: package mhi bus driver
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2022-04-05 17:31:04 +02:00
Felix Fietkau
39ec9edacb bpf-headers: update to linux 5.15
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-04 21:08:38 +02:00
Paul Spooren
839b1ff1fc grub2: add missing license
The PKG_LICENSE field was missing.
While at it, normalize the Makefile a bit.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-04-04 18:15:02 +02:00
Daniel Golle
82f9ad6ab2
kernel: load device-mapper early on boot
Previously commit openwrt/packages@3abb7cb ("lvm2: Added script and updated Makefile[...]")
couldn't actually work and allow rootfs_data to be stored on a LVM2 as
the necessary kernel modules had not been loaded at this point.
Fix this by loading device-mapper modules early at boot.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-04-03 16:25:05 +01:00
Felix Fietkau
72b93b77a5 bpf-headers: support CONFIG_HZ=300
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-04-01 15:26:08 +02:00
Piotr Dymacz
173198e35a kernel: modules: drop 'AddDepends/bluetooth' calls
Function 'AddDepends/bluetooth' doesn't exist in our codebase.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-04-01 14:32:54 +02:00
Vincent Pelletier
15fbb91666 kernel: scale nf_conntrack_max more reasonably
Use the kernel's built-in formula for computing this value.
The value applied by OpenWRT's sysctl configuration file does not scale
with the available memory, under-using hardware capabilities.
Also, that formula also influences net.netfilter.nf_conntrack_buckets,
which should improve conntrack performance in average (fewer connections
per hashtable bucket).

Backport upstream commit for its effect on the number of connections per
hashtable bucket.

Apply a hack patch to set the RAM size divisor to a more reasonable value (2048,
down from 16384) for our use case, a typical router handling several thousands
of connections.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2022-04-01 13:23:41 +01:00