Commit Graph

538 Commits

Author SHA1 Message Date
Daniel Golle
5e4bb476c0 kexec-tools: bump version and add support for crashdump kernel
split kexec-tools into two packages, kexec and kdump.
* kexec to simply execute a new kernel
* kdump is for loading and collecting debris of a crashed kernel with
  support for kdump forensics.

In order to properly support booting into a crashkernel, an init script
as well as UCI configuration has been added.
As modifying the kernel cmdline is required for this to work in x86
platforms use an uci-defaults script to modify /boot/grub/grub.cfg.

To test collecting crash information, use the 'c' sysrq-trigger, ie.
echo c > /proc/sysrq-trigger

This should result in the crash kernel being executed and (depending
on the configution) dmesg and/or vmcore getting saved.

To check if the crash kernel was loaded properly, use the 'status'
command of the kdump init script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-06-09 22:21:25 +02:00
Alif M. Ahmad
415c47de79 package/grub2: update to 2.02
Update to version 2.02

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-06-07 18:31:10 +02:00
Martin Schiller
d189fe62cd uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzo
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:31 +02:00
Martin Schiller
bbb27b1b22 uboot-lantiq: Support newer versions of the PEF7071 ethernet
This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck)

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-05-31 08:41:16 +02:00
Marty Plummer
558d86923e ar71xx: add support for EnGenius ENS202EXT
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.

The device is based on Qualcomm/Atheros AR9341 v1.

Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button

Flash instructions:

You have three options:

- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.

- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.

- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:

*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
      stat -- Status
       sys -- System
    wless2 -- 2.4G-Wireless
      mgmt -- Management
      tree -- Tree
      help -- Help
    reboot -- Reboot
ens202ext>mgmt
  Management
---========= Commands Help =========---
     admin -- Administration
     mvlan -- Management VLAN settings
      snmp -- SNMP settings
    backup -- Backup/Restore settings
    autorb -- Auto reboot settings
   fwgrade -- Firmware upgrade
      time -- Time settings
   wifisch -- Wifi schedule
       log -- Log
      diag -- Diagnostics
      disc -- Device Discovery
    logout -- Logout
      help -- Help
      exit -- Exit
ens202ext/mgmt>fwgrade
  Management --> Firmware upgrade
---========= Commands Help =========---
      fwup -- Firmware upgrade
      help -- Help
      exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
2017-05-30 14:15:25 +02:00
Josua Mayer
e2814f6416 u-boot-mvebu: clearfog: enable setexpr command
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
c4f9474059 u-boot-mvebu: clearfog: implement distro-boot
Add a patchfile that implements distro-boot and is meant to go upstream
Also make the other patches git-am'able for easier maintenance.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Josua Mayer
86c4144571 u-boot-mvebu: update to 2017.03
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2017-05-30 14:00:30 +02:00
Mantas Pucka
cd9d0f9e97 uboot-envtools: add support for 8devices Rambutan
Signed-off-by: Mantas Pucka <mantas@8devices.com>
2017-05-15 22:43:33 +02:00
Marko Ratkaj
ee1cee2cac mvebu: add ClearFog Base support
Add support for SolidRun ClearFog Base board.

The base model is a smaller version of ClearFog Pro without
the DSA switch, replacing it with a second copper gigabit
port, and only one PCIe socket.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Marko Ratkaj
ec4a8c6dee mvebu: ClearFog renamed upstream to ClearFog Pro
The conventional model is now known as the "Clearfog Pro"

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-05-14 00:34:03 +02:00
Alexander Couzens
21c2e93e67
uboot-omap: rename patch to 101-disable-thumb-omap3.patch
It's disabling thumb for the whole omap3 family.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:19:07 +02:00
Alexander Couzens
ca8988614c uboot-omap: enable thumb for overo
Even it's unknown if it's booting with thumb, because the lack of hardware.
Enable it for now, so the build succeed, because without thumb it can not fit
into spl.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-30 12:17:30 +02:00
Alexander Couzens
23fc55e723 package/uboot-omap: add am335x_boneblack
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
a5eb9c6370 package/uboot-omap: add default uEnv to boot via mmc card
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
147e18bdbd package/uboot-omap: re-introduce patches dropped by update to v2017.01
The beagleboard doesn't boot with Thumb enabled, but without Thumb the
SPL (first stage bootloader) is too big to fit into SRAM.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
e2caa74a2f package/uboot-omap: install image to STAGING_DIR_IMAGE
to use them later by image/Makefile to create full working sdcard images

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Alexander Couzens
4ac4148cc4 package/uboot-omap: assign BUILD_DEVICES most boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-24 18:03:31 +02:00
Mathias Kresin
18618695ae ramips: dont replace the board name
Use fixed led names and add each board variant instead of manipulating
the board name.

It makes the ramips board name function less different to the one used
in other targets and allows to merge them with a common function.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-21 07:47:59 +02:00
Alif M. Ahmad
ffd055d5bb grub2: update to 2.02~rc2
Update to version 2.02~rc2.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-04-12 11:24:57 +02:00
Felix Fietkau
8b8ce566d9 uboot-ar71xx: fix build error
The HOSTCFLAGS override only works on newer u-boot versions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-06 16:25:08 +02:00
Felix Fietkau
68139cc0e8 u-boot.mk: pass HOSTCC and HOST_CFLAGS into the build
Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls
from the build system

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:34:23 +02:00
Felix Fietkau
2526d150dc uboot-lantiq: fix build error on mac os x
asm/* includes are not safe for the host build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-04-04 12:33:34 +02:00
Philip Prindeville
dfacdc6a99 kexec-tools: get kexec running on MUSL and x86 hardware
Couple of important upstream patches (slated for 2.0.15) that
are necessary for kexec to run on MUSL and on x86 hardware.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-04-03 08:50:57 +02:00
Paul Wassi
55920643b1 package/boot/uboot-kirkwood: fix build errors for nsa310 and nsa325
With upstream changes, the last update to U-Boot 2017.03
broke the nsa310 and nsa325 targets. Also fix some redefines.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-27 08:09:00 +02:00
Felix Fietkau
ca44b9a0d4 pistachio: remove custom board detection override
Use device tree based model string

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Felix Fietkau
eb98bf605e pistachio: remove pistachio_board_name, use the generic function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:22 +01:00
Ian Pozella
0d271cef80 target: add pistachio
The Pistachio target is a MIPS interaptiv based SoC developed by
Imagination Technologies. It includes blocks for i2c, spi, audio,
usb and WiFi.

This also adds the base support for the 'Creator Ci40 (marduk)'
device which uses the Pistachio SoC to create an IoT hub by
including Bluetooth, WiFi and 6lowpan on one board. Additionally 2x
Mikrobus ports are available to expand with further RF technologies
or add sensors. You can find out more here http://creatordev.io.

Note, this commit is just the initial board support hence the
following are not expected to work yet:
 * WiFi
 * Bluetooth
 * 6lowpan
 * Audio
 * Mikrobus uarts, user leds (clock dependency of 6lowpan chip)

The aim of this commit is to essentially have the same level of
support that currently exists in the mainline kernel.

Signed-off-by: Abhijit Mahajani <Abhijit.Mahajani@imgtec.com>
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
Signed-off-by: Mayank Sirotiya <Mayank.Sirotiya@imgtec.com>
Signed-off-by: Sean Kelly <Sean.Kelly@imgtec.com>
2017-03-22 11:43:22 +01:00
Felix Fietkau
7e798dab56 lantiq: remove lantiq_board_name, use the generic function instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 11:43:21 +01:00
Felix Fietkau
5c617aec05 uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-22 09:45:18 +01:00
Paul Wassi
c95c3165b9 package/boot: update uboot-kirkwood to 2017.03
Bump uboot-kirkwood to upstream release 2017.03

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-03-20 08:19:35 +01:00
Alex Samorukov
ffa9f3d74b packge/boot/rbcfg: add new boot constants found in the recent Mikrotik devices
Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
2017-02-26 13:31:43 +01:00
Alif M. Ahmad
399cbbd127 grub2: update to 2.02~rc1
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-02-26 13:31:32 +01:00
Yangbo Lu
0e5d67d483 layerscape: add LS1043A Rev1.1 support
Backport kernel patches for LS1043A Rev1.1 support from upstream,
patchwork, and SDK. And update to latest u-boot to support LS1043A
Rev1.1.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-02-26 08:41:40 +01:00
Alexandru Gagniuc
43b6d3f059 uboot-omap: Makefile: Include kernel.mk
This is needed for the definition of $(LINUX_DIR). This is used in
u-boot.mk to change the device-tree compiler to the dtc used by
linux.

Without this, the build will use the system dtc. This results in a
build failure when a dtc does not exist outside the buildroot.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-23 16:43:01 +01:00
Alexandru Gagniuc
a4def18f29 uboot-omap: Update to u-boot v2017.01
Specifying USE_PRIVATE_LIBGCC is no longer needed, as it is the
default.

Patch 001 is removed, since it was already merged upstream. Patches
100 and 101 are removed because they do not appear to be needed
anymore, and they do not conform with the sign-off and commit message
procedures.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Alexandru Gagniuc
b132d4fb91 uboot-omap: Do not hide bootloader packages
Because they were hidden, there was no way to disable the uboot
targets in menuconfig, so they had to be built every time. The omap
target is the only one to hide uboot packages. To be consistent with
the other targets, and have more control over the build, un-hide the
u-boot packages.

Note that the default behavior remains unchanged, as uboot will be
built unless explicitly disabled.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Alberto Bursi
3b90ed8c18 uboot-kirkwood: fix usb of nsa310b u-boot
fixes issue "nsa 310b u-boot can initialize usb but cannot
use usb storage so it cannot load files from usb"

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-14 12:26:20 +01:00
Sven Eckelmann
2696b0ec1e package/uboot-envtools: add OpenMesh A40 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Sven Eckelmann
bddb243640 package/uboot-envtools: add OpenMesh a60 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Sven Eckelmann
88aa7eeee5 package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2017-02-14 12:18:05 +01:00
Alberto Bursi
add1dd0081 uboot-kirkwood: add Zyxel NSA325 uboot
add uboot for NSA325

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Alberto Bursi
760185972f uboot-envtools: add nsa325 envs
adding nsa325 envs for consistency with other kirkwoods

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Alberto Bursi
a9d347c11c uboot-kirkwood: fix goflexhome/net bootcommand
Goflexhome/net use uImage, and to boot an uImage the u-boot
must use bootm command, not bootz.

Fixes the "i cannot boot LEDE with this u-boot" issue that I
found out myself with my goflexnet.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:48 +01:00
Alberto Bursi
a6ef5933f8 uboot-kirkwood: remove obsolete patches
all patches for CONFIG_SYS_GENERIC_BOARD are obsolete for
uboot 2016 sources.

Run-tested with the uboot of goflexnet, also the md5sum of
all other uboots is the same with or without these patches.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-09 12:26:42 +01:00
Jo-Philipp Wich
475da81ec0 ixp4xx: put apex images into image staging directory
Do not put the apex images into the kernel build directory as this directory
might get removed after kernel updates while the apex packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
e0579aecf8 mxs: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
7f9d537f21 oxnas: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
c6502ce3bb layerscape: put u-boot and ucode images into image staging directory
Do not put the u-boot and ucode images into the kernel build directory as this
directory might get removed after kernel updates while the u-boot packages
InstallDev recipe is not getting re-executed because it is still considered
current, leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich
237bd36135 mvebu: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing u-boot images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Mathias Kresin
b52932e773 uboot-lantiq: mark SPL variants as broken
All SPL variants are lzo compressed. The lzop binary is used for
compression but is not available in tools.

Additionally at least the NAND SPL support is broken and doesn't create
working bootloaders.

The fb3370 SPI NOR SPL enabled u-boot isn't required for LEDE since the
LEDE images are targeting the pre-installed EVA bootloader.

Mark these u-boot variants as well as the SPL variants for the
reference boards as broken till the lzma issues are fixed upstream and
we can use lzma instead of lzo compression.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-25 09:35:04 +01:00
Felix Fietkau
d974e5a235 uboot-lantiq: fix a tool portability issue
Use the standard off_t type instead of loff_t

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 08:29:16 +01:00
Felix Fietkau
07c9bde0da mxs: fix image build issues
stage u-boot images in KERNEL_BUILD_DIR for building images
always select uboot-mxs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 07:48:43 +01:00
Alberto Bursi
55ecceb84e uboot-envtools: add nsa310b envs
accessing the u-boot's envs on this device is required to read the mac address.
These are the envs of the new u-boot, not of the stock one.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-24 16:21:25 +01:00
Felix Fietkau
317bd88973 uboot-zynq: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau
e018c4d7ab uboot-sunxi: clean up, switch to u-boot.mk
Instead of referencing u-boot packages from device profiles and having a
-all metapackage, make the u-boot packages hidden (they don't install to
bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau
9913c4eae4 uboot-pxa: remove package
support for pxa has been gone for a long time now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau
bb88ec947f uboot-oxnas: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:25 +01:00
Felix Fietkau
12bfa1c425 uboot-omap: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
ce997eb591 uboot-mxs: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
366c33962c uboot-mvebu: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
608d36e423 uboot-layerscape-32b: simplify the package, it does not build anything
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
0dbdc2a98d uboot-layerscape: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
605a03dade uboot-imx6: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
981ec49b90 uboot-at91: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
04cc026a7e uboot-kirkwood: switch to u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
83783f296a uboot-ar71xx: switch to using u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Felix Fietkau
b27241a1a1 uboot-lantiq: switch to using u-boot.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 16:21:24 +01:00
Alberto Bursi
3d1b2b22d6 uboot-kirkwood: add uboot for nsa310b
this commit allows to make a standalone u-boot for nsa310b.

While both first-stage and second-stage u-boot work fine if
installed to flash or loaded with kwboot,
I could not get stock u-boot nor bodhi's u-boot to chainload
any second stage u-boot (I also tried with dockstar's uboot
that works fine on this device if loaded with kwboot).

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-24 16:21:24 +01:00
Mathias Kresin
dc5ba0a48a packages: mark packages depending on a target as nonshared
The packages can't be build as shared packages due to the unmet
dependencies.

Fixes FS#418.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-24 09:45:05 +01:00
Felix Fietkau
34ec245662 uboot-lantiq: fix build issue
Do not reference BIN_DIR in the package install section directly, use
$(1) instead.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-22 15:14:54 +01:00
Felix Fietkau
d4ce3e8692 uboot-mvebu: enable loader with the default profile
Fixes build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-08 18:39:44 +01:00
Felix Fietkau
fbe3e22507 uboot-sunxi: enable parallel build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:15 +01:00
Yousong Zhou
6268d496a4 uboot-sunxi: add uboot-sunxi-all for selecting all other variants
While at it, the following changes are introduced

 - Rewrite the Makefile for better readability
 - Make parallel builds possible

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Mathias Kresin
8c822ec4ca uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Mathias Kresin
cfe1c6debe uboot-lantiq: fix build with gcc6
Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Felix Fietkau
c9e4cf2299 kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code
Update the correspoding u-boot configs to stop relying on
kernel-in-rootfs, which was removed a while back

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
c7c1cf5618 treewide: clean up and unify PKG_VERSION for git based downloads
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:21 +01:00
Felix Fietkau
842ed8448d kexec-tools: remove useless CONFIG_KEXEC_TOOLS_TARGET_NAME indirection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:22 +01:00
Felix Fietkau
fe4fe3edf2 kexec-tools: build by default, even if CONFIG_KERNEL_KEXEC is unset
Helps find build issues and makes the package available on snapshot
builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:22 +01:00
Felix Fietkau
ff47fb0dd9 kexec-tools: enable support for x86_64
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:22 +01:00
Felix Fietkau
1a071115d6 kexec-tools: update to 2.0.14-rc1, fix build errors
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-20 16:24:21 +01:00
Gilles Mazoyer
364ec6e0e0 kexec-tools: fix compile error
When compiling file vmcore-dmesg.c, several errors "unknown type name 'loff_t'"

Signed-off-by: Gilles Mazoyer <mazoyer.gilles@omega.ovh>
2016-12-20 16:24:21 +01:00
Alexandru Ardelean
65c8f2890c grub2: upgrade to 2.02-beta3 (3 years newer than previous)
'100-musl-compat.patch' does not seem to be required anymore.
'210-fix_serial_rtscts.patchi' is superseeded by:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=bac5d1a64ab4191058a8fd4c05f6b3b339e249e7

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Alexandru Ardelean
77812cdfec grub2: disable 'check-macro-version' build rule in 'po' build
This seems to occur when gettext-full is built on the host-side
and the autoreconf stuff re-generates some of the build files,
except for the po/Makefile.in.in

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Alexandru Ardelean
2b54fa4dff grub2: do not generate mkfonts at build time
Even though these fonts may not be installed, they seem to be
generated at build time.

Seems that the configure script re-generated from configure.ac
is a bit more annoying than it has to be.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Alexandru Ardelean
b33845b2da grub2: add PKG_FIXUP:=autoreconf
Reboot of: a0ea22ac43
Reverted: 3c52cbfa53

The host-side build of grub2 requires this sometimes.
This will re-generate the ./configure script from configure.ac.
I don't know the conditions of how this reproduces, it just
sometimes appears, and sometimes doesn't.

Build error
```
<lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
         You should only need it if you modified 'acinclude.m4' or
         'configure.ac' or m4 files included by 'configure.ac'.
         The 'aclocal' program is part of the GNU Automake package:
         <http://www.gnu.org/software/automake>
         It also requires GNU Autoconf, GNU m4 and Perl in order to run:
         <http://www.gnu.org/software/autoconf>
         <http://www.gnu.org/software/m4/>
         <http://www.perl.org/>
Makefile:3962: recipe for target 'aclocal.m4' failed
```

Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target
builds) over just using HOST_FIXUP.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Piotr Dymacz
1599a14b32 uboot-envtools: drop executable file attribute from files/ipq
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
Piotr Dymacz
a9ce2ba31c uboot-envtools: fix Edimax BR-6425 board name
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
Piotr Dymacz
35ed3be59f uboot-envtools: fix code formatting style in uci-defaults files
Few minor code formatting style fixes, including:

- keep one board per line
- always use "|\" (for consistency)
- remove redundant double quotes and empty lines

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
Piotr Dymacz
f70a2adca1 uboot-envtools: keep boards in alphabetical order
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Piotr Dymacz
c40477519e uboot-envtools: add support for YunCore SR3200 and XD3200
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
ad907e1c03 layerscape: add 64b/32b target for ls1046ardb device
Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
d5fc7430ca layerscape: uboot-layerscape: prefer github over git.freescale.com
In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Mathias Kresin
36148d923b uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.

Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.

Use the same mtd layout as the stock u-boot. Add add UBI support.

Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.

Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00
Eddi De Pieri
9720185820 uboot-envtools: make it not shared
uboot-envtools have some stuff related to the cpu.

This should fix following error on lantiq soc:

Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk.
Configuring uboot-envtools.
//usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh'

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 10:17:55 +01:00
Eddi De Pieri
ea12a80276 uboot-lantiq: vgv7519 fix tftp loading of big kernel/image size
On my board:
Bytes transferred = 7084442 (6c199a hex)
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-11-11  17:40:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    7084378 Bytes = 6.8 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error
7 - must RESET b
ROM VER: 1.0.5
CFG 01

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 08:43:49 +01:00
John Crispin
3c52cbfa53 Revert "grub2: add PKG_FIXUP:=autoreconf"
this caused build errors on x86

This reverts commit a0ea22ac43.

Signed-off-by: John Crispin <john@phrozen.org>
2016-11-21 16:49:54 +01:00
Alexandru Ardelean
a0ea22ac43 grub2: add PKG_FIXUP:=autoreconf
The host-side build of grub2 requires this sometimes.
This will re-generate the ./configure script from configure.ac.
I don't know the conditions of how this reproduces, it just
sometimes appears, and sometimes doesn't.

Build error
```
<lede-dir>/build_dir/target-x86_64_musl-1.1.15_yogi/host/grub-2.02~beta2/build-aux/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
         You should only need it if you modified 'acinclude.m4' or
         'configure.ac' or m4 files included by 'configure.ac'.
         The 'aclocal' program is part of the GNU Automake package:
         <http://www.gnu.org/software/automake>
         It also requires GNU Autoconf, GNU m4 and Perl in order to run:
         <http://www.gnu.org/software/autoconf>
         <http://www.gnu.org/software/m4/>
         <http://www.perl.org/>
Makefile:3962: recipe for target 'aclocal.m4' failed
```

Adding PKG_FIXUP adds sanity (i.e. autoreconf is used for host & target
builds) over just using HOST_FIXUP.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-11-21 12:54:24 +01:00
Paul Wassi
d6e8b1f841 uboot-envtools: add 'dockstar' for kirkwood
Add board 'dockstar' to known fw_env-configurations.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-21 10:10:38 +01:00
Piotr Dymacz
d86f08cc94 uboot-envtools: add support for YunCore CPE830
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
dcceea4fd3 uboot-envtools: add support for YunCore CPE870
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Piotr Dymacz
9ee8257cc7 uboot-envtools: add support for YunCore AP90Q
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
Yutang Jiang
4a6f9fc633 layerscape: uboot: using perl script:byte_swap.pl to replace tcl script:byte_swap.tcl
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-11-16 10:58:09 +01:00
Alberto Bursi
decf6b3314 yamonenv: move to Boot Loaders submenu
Boot Loaders submenu is the place where all other boot loaders are.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Alberto Bursi
08279810ed uboot-envtools: move to Boot Loaders submenu
Boot Loaders submenu is where other bootloader tools (fconfig and grub2-editenv) are.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-03 08:21:47 +01:00
Jo-Philipp Wich
7a58972680 uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)
The current uboot default config for the A13 SOM erroneously enables support
for the AXP209 power regulator IC which is not present on the board.

This superfluous support module sets an incorrect initial clock frequency and
confuses the kernel, ultimately leading to a boot failure later on.

Properly disable the PMIC support and enable the EHCI support by translating
the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and
USB_EHCI_HCD symbols respectively.

Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and
refresh the remaining patches of the series while we're at it.

Reported-by: Mario Fischer <mario-fischer@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 02:11:19 +01:00
Yutang Jiang
15a14cf166 layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Yutang Jiang
c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00
Paul Wassi
776aa91b0f uboot-kirkwood: fix default bootcmd for Seagate Dockstar
Fix the default value for the 'bootcmd' environment variable.
Therefore make the default bootcmd work for buildbot's images.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-27 12:45:02 +02:00
Paul Wassi
705240eeb5 uboot-kirkwood: bump to upstream 2016.09.01
Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches
cleaned up and reworked.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-10-27 12:44:54 +02:00
Stijn Tintel
e3875350f3 ar71xx: add support for D-Link DAP-2695 rev. A1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
2016-10-27 01:50:42 +03:00
Jo-Philipp Wich
f2752f4735 grub2: add missing SECTION variable and remove non breaking space
Fix metadata scan failure in the grub2 package by removing an unexpected
invisible space character and by adding back the missing SECTION variable
which was removed with d140648.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-10-26 17:53:53 +02:00
André Valentin
ebd7e565c7 package/uboot-envtools: Add support for ZyXEL NBG6817
Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
Yutang Jiang
e7dc511e64 uboot-zynq: fix compile error for be short of dtc
While enable zynq uboot:
CONFIG_PACKAGE_uboot-zynq-zc702
CONFIG_PACKAGE_uboot-zynq-zed
CONFIG_PACKAGE_uboot-zynq-zybo

make will arise dtc error:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
make[4]: *** [checkdtc] Error 1

Pass the kernel dtc to uboot for compile.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-26 12:37:46 +02:00
Alberto Bursi
d140648622 grub2: move to Boot Loaders category
because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders

Also moved brub2-editenv in Utilities -> Boot Loaders

Part of a wider housekeeping effort on the packages repository.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
f9ed2bc92f fconfig: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find fconfig and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Alberto Bursi
762928a13e rbcfg: move to Boot Loaders submenu of Utilities
Boot Loaders submenu of Utilities is the most logical place to find rbcfg and other bootloader tools.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-10-26 12:37:45 +02:00
Imre Kaloz
3764caa934 mvebu: add support for the Linksys WRT3200ACM (Rango)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-24 08:45:06 +02:00
Alexandru Ardelean
5b607bd8d8 boot/rbcfg: drop Build/Prepare rule in favor of default one
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-10-15 11:36:53 +02:00
Dirk Neukirchen
054f3fd57b uboot-ar71xx: make reproducible
OpenWrt uses ancient u-boot thats not reproducible.

There are multiple upstream changes that introduce
reproducible builds like:
859e92b775fd8ebcfacc591eaf621b677c95b6f7
(not used here - the CMD_DATE/TIMESTAMP functionality
seems to be disabled by config)

70d39f57146a6cb94736db39c770c3d95e07bedb
f3f431a712729a1af94d01bd1bfde17a252ff02c
2d9efa1227262249d381ed5d9d341cbdba76e62d

Instead of changing the Makefile too much
this changeset just tries to use the
changes in Makefile from current upstream git f5fd45f

*Should* fix issue reported by reproducible lede page:
https://tests.reproducible-builds.org/lede/lede.html

Compile tested only
(verified w. hexdump & md5sum)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-10-15 11:36:51 +02:00
Daniel Engberg
9edfe7dd13 source: Switch to xz for packages and tools where possible
* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-10-06 12:16:56 +02:00
Ben Whitten
6b31c4cb38 package: Add U-Boot for at91
Adds u-boot for the at91 platform and a couple of boards.
The build honours COPTS to benefit from fortify source et al.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-10-06 12:15:13 +02:00
Jonas Gorski
c4823622d8 uboot-mvebu: reset the 88E1512 PHY to make the wan port work
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 13:03:18 +02:00
Jonas Gorski
d8075b15d0 uboot-mvebu: make hidden and be m for clearfog to fix IB failing to add it
Uboot-mvebu isn't a real package, which will break the image builder
when it tries to install it during the packing step. Instead of cleafog
selecting it through its default packages, make it default to m if the
clearfog profile is selected.

This will ensure it is always build, but never added to the rootfs. This
fixes creating images for clearfog with IB.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:48:18 +02:00
Jonas Gorski
bc1f006b4e uboot-mvebu: also install into KDIR to ensure it packaged in IB
The clearfog image requires u-boot, so package it into KDIR to make sure
it is available in imageBuilder.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-26 12:47:36 +02:00
Tim Harvey
a4b86b292a boot: kobs-ng: update kobs-ng for newer kernels
This allows kobs-ng to flash the SPL successfully on the 4.4 kernel used by
the Gateworks IMX boards supporting NAND. The previous version of kobs-ng
worked with the 3.14 kernel but will brick a board making its SPL unbootable
for the 4.4 kernel.

See http://trac.gateworks.com/wiki/ventana/bootloader#nandspl for instructions
on updating the SPL from Linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-04 13:36:09 +02:00
Felix Fietkau
7130833a27 mvebu: fix boot script for booting from mmc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-02 14:43:53 +02:00
Josua Mayer
c8580f51ba u-boot-envtools: fix building with glibc
tools/env/fw_env.c misses to include stdint.h.
Apparently musl doesn't mind and includes this header by default,
but glibc does not and causes the build to fail.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
2016-08-18 09:49:18 +02:00
John Crispin
10f9ea0bc6 uboot-lantiq: package does not build inside the SDK
the packages failed to build inside the SDK due to missing ethernet
firmware files.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Felix Fietkau
cc7029f8a9 uboot-ar71xx: fix default selection for NBG460N/550N/550NH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:50:43 +02:00
Zhao Gang
d963ddf042 ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
Felix Fietkau
6b654ab741 uboot-oxnas: fix build error on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 12:48:28 +02:00
Piotr Dymacz
14ee2b0642 uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Piotr Dymacz
c30fd5e87d uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Hauke Mehrtens
3f38356893 packages: prefer http over git for git protocol
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00
Mathias Kresin
b32eb40210 uboot-lantiq: Add Arcadyan ARV7506PW11 support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Daniel Golle
fac7ba1abc uboot-envtools: add support for ZBT-WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
John Crispin
928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau
704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau
57343b210a uboot-lantiq: get rid of bogus profile dependencies
Turn them into subtarget dependencies instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 06:42:42 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Mathias Kresin
c065cb08db uboot-lantiq: VGV7510KW22 - remove NOR SPL leftovers
Missed this one with my last cleanup patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b0a202ebdc uboot-lantiq: Add Arcadyan VGV7519 support
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
ecf10d3796 uboot-lantiq: vrx200 - lzma compress gphy firmware
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).

Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
8df4eb0b9b uboot-lantiq: vrx200 - add support for dual nor flash
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Sven Eckelmann
3f508fce77 package/uboot-envtools: add OpenMesh MR1750v2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:26 +02:00
Sven Eckelmann
00943e0931 package/uboot-envtools: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Mathias Kresin
e81acacaa3 uboot-lantiq: ARV752DPW - use correct switch driver
There is no RTL8206 switch driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78 uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9 uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99 uboot-lantiq: VGV7510KW22 - cleanup board config
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.

The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.

Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3 uboot-lantiq: drop unused board patches
None of the boards is supported by lede. No need to keep the patches in
the lede tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Andrew Yong
374cae9e6f ramips: add initial support for SamKnows SK-WB8
Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-12 03:29:35 +02:00
John Crispin
be1985471e zynq: Add Zybo device support
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49257
2016-04-26 11:44:29 +00:00
John Crispin
869d3adc37 Zynq: Add Zedboard device support
Tested-by: Joe Zhang <jz21082@gmail.com>
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49256
2016-04-26 11:44:26 +00:00
John Crispin
152da8b240 lantiq: uboot-envtools on BTHOMEHUBV3A
Generate fw_env.config for BTHOMEHUBV3A.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49236
2016-04-26 11:43:11 +00:00
Hauke Mehrtens
012da658a4 oxnas: add support for Akitio MyCloud mini
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49197
2016-04-19 20:12:41 +00:00
John Crispin
eeaf5035df uboot-envtools: add OpenMesh OM5P-ACv2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49153
2016-04-09 10:26:28 +00:00
John Crispin
2b541ce3f9 uboot-envtools: add OpenMesh OM5P-AC support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49146
2016-04-09 10:26:04 +00:00
Zoltan Herpai
2d4ebff3ad package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 49089
2016-03-29 11:42:14 +00:00
Luka Perkov
d1aa4bfe1d uboot-mvebu: add package
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>

SVN-Revision: 49088
2016-03-25 12:07:03 +00:00
Luka Perkov
35e7bfb906 uboot-envtools: add support for ap120c
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49083
2016-03-23 22:31:41 +00:00
John Crispin
a8bf92457d uboot-zynq: Update to U-Boot 2016.03 release
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49078
2016-03-23 12:52:41 +00:00
John Crispin
99414dbcf1 ramips: Add support for Xiaomi MiWiFi Nano
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

v3  includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds

SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
Luka Perkov
9d0c1f484b uboot-kirkwood/goflexhome: explicit define the size of the last partition
Explicit sets the size of the mtdparts, because the kernel has also an explicit value.
If they have diffent sizes the ubi won't be detected.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49018
2016-03-14 17:06:18 +00:00
Luka Perkov
35c91a2274 uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"
otherwise the uboot is missing important commands like bootz

Signed-off-by: Martin Mueller <mm@sig21.net>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49017
2016-03-14 17:06:17 +00:00
Luka Perkov
c28e41f0d7 uboot-kirkwood/goflexhome: update bootargs to use new ubi style
Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a
ubi volume. Dropping the mtd parts because the mtd layout is saved in the
device-tree, which is appended to the zImage.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49016
2016-03-14 17:06:16 +00:00
Luka Perkov
f533c86d12 uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstar
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49012
2016-03-14 17:06:11 +00:00
John Crispin
dac55e665e uboot-oxnas: fix typo leading to tool not being built
Fixes #21907

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48764
2016-02-25 10:13:53 +00:00
John Crispin
2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00
Zoltan Herpai
87b150dc05 packages: uboot-sunxi: fix SATA powerup on Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48619
2016-02-02 23:13:29 +00:00
Felix Fietkau
59e3a4714a grub2: switch back to installing to STAGING_DIR_HOST
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48424
2016-01-21 11:46:18 +00:00
Zoltan Herpai
76b903a415 packages: bump uboot-mxs to 2016.01, refresh patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48374
2016-01-19 21:50:11 +00:00
Zoltan Herpai
39f385d0d6 packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48252
2016-01-15 20:27:32 +00:00
Zoltan Herpai
f15fc140f1 packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48154
2016-01-08 20:37:43 +00:00
Luka Perkov
6a661d7fe3 uboot-imx6: add support for i.MX6q SABRE board
U-boot ships with the `mx6qsabresd` configuration file to configure a
bootloader suitable for booting the Freescale i.MX6q SABRE evaluation board
from SD card. Expose this option in the uboot-imx6 Makefile.

Signed-off-by: Keno Fischer <keno@juliacomputing.com>

SVN-Revision: 48014
2015-12-28 04:56:33 +00:00
Zoltan Herpai
0f18228a3a packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47959
2015-12-22 13:04:31 +00:00
Felix Fietkau
fb1273dfdd ar71xx: PowerCloud CR5000 openwrt configuration
OpenWrt configuration part of support for the PowerCloud Systems
CR5000.  The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch.  The CR5000 was sold as
hardware for the Skydog cloud-managed router service.

    Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47946
2015-12-19 11:28:18 +00:00
Felix Fietkau
59fc337a9a ar71xx: PowerCloud CR3000 OpenWrt configuration
OpenWRt configuration part of support for the PowerCloud
Systems CR3000.  The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47945
2015-12-19 11:28:12 +00:00
Felix Fietkau
abc1faad0b ar71xx: PowerCloud CAP324 OpenWrt configuration
Openwrt configuration part of support for PowerCloud CAP324
Cloud AP.  The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via PoE
or a wall wart.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47944
2015-12-19 11:27:59 +00:00
John Crispin
98b9dfd2b5 uboot-omap: update to 2015.10
- tested on Beagleboard C4

- remove upstream patches

- disable THUMB mode on OMAP3 this increases binary size
  (remove CONFIG_SYS_THUMB_BUILD)
- reduce SPL size by disabling EXT feature
  (remove CONFIG_SPL_EXT_SUPPORT)

this fixes 2015.07 and 2015.10-rc3
Beagleboard C4 booting
which were broken by upstream commit
with id: bd2c4522c26d535515aebca52d27c004a7e0c05c

Arm THUMB mode is broken because of an yet unknown errata
see: http://lists.denx.de/pipermail/u-boot/2015-August/225793.html

- backport upstream fix that was introduced in 2015.10-rc5
  and was not fixed in 2015.10 final

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 47924
2015-12-17 09:29:42 +00:00
John Crispin
786717a7ce uboot-lantiq: fix build with gcc5
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47863
2015-12-11 15:08:34 +00:00
John Crispin
9a12fe8ea9 uboot-imx6: fix build with gcc-5
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47611
2015-11-24 18:27:57 +00:00
Hauke Mehrtens
53d94f89e8 uboot-omap: fix build with gcc-5
This fixes some problems with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47539
2015-11-20 23:38:39 +00:00
Hauke Mehrtens
923a59315c uboot-kirkwood: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47537
2015-11-20 22:50:11 +00:00
Hauke Mehrtens
dc2b471d6a uboot-oxnas: fix build with gcc-5
This backports a patch from upstream u-boot to make it compile with gcc-5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47535
2015-11-20 22:22:37 +00:00
Hauke Mehrtens
4afee42560 uboot-mxs: fix build with gcc-5
gcc-5 handles inline without static differently and that makes
uboot-mxs fail to build. Remove the inline so it gets exported and can
be used in other functions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47533
2015-11-20 21:15:48 +00:00
Zoltan Herpai
d5a77a0dbc packages: uboot-sunxi: update Lamobo R1 patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 47516
2015-11-19 14:43:16 +00:00
John Crispin
1f9cd871f7 uboot-envtools: add support for linkits7688d
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47500
2015-11-18 15:00:38 +00:00
Luka Perkov
2f8ebe10b9 uboot-envtools: kirkwood: fix EA35/4500 board names
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47457
2015-11-11 12:48:29 +00:00
Luka Perkov
3ef14d0c3d kirkwood: rework Linksys EA[34]500 DTS
- Use board engineering names rather than marketing names

- Linksys uses a dual firmware layout, where the bootloader
  will switch to the other stored image when one fails to
  boot three consecutive times.

  In order to make this firmware compatible with the factory
  images and the stock bootloader we must match this layout.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47429
2015-11-10 00:16:24 +00:00
Felix Fietkau
b8b4d36379 uboot-envtools: fix various compile breakage issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47383
2015-11-04 22:17:40 +00:00
Imre Kaloz
1345073268 uboot: create the uboot config file for the shelby as well
fixes #20827

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47365
2015-11-03 11:07:30 +00:00
John Crispin
67d890315c uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22
This fixes #20409

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47352
2015-11-02 10:18:24 +00:00
Felix Fietkau
97abe48112 kobs-ng: fix compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47332
2015-11-01 12:38:38 +00:00
Luka Perkov
e920d31f4b uboot-envtools: update to 2015.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47328
2015-10-31 19:46:56 +00:00