Gabor Juhos
4c54635106
ar71xx: rb2011: define LEDs connected to the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39341
2014-01-20 10:23:01 +00:00
Gabor Juhos
b4dc45e07d
ar71xx: rb2011: fix eth5 LED
...
The eth5 LED on the RB2011 is not working because the
LED control rule is missing. Fix it.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39335
2014-01-20 10:22:49 +00:00
Gabor Juhos
d7a0184446
ar71xx: rb2011: use board name from the hardware config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39096
2013-12-16 12:41:48 +00:00
Gabor Juhos
26ca95fefa
ar71xx: rb2011: simplify setup code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39095
2013-12-16 10:28:42 +00:00
Gabor Juhos
59b6cf1e70
ar71xx: rb2011: use the new RouterBOOT helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39094
2013-12-16 10:28:41 +00:00
Gabor Juhos
da66ea52ec
ar71xx: register USB port for RB2011U* devices
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36801
2013-05-30 17:38:31 +00:00
Gabor Juhos
151dca0935
ar71xx: make the SFP port usable on RB2011*S boards
...
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36799
2013-05-30 17:38:28 +00:00
Gabor Juhos
3467b17e69
ar71xx: rb2011: add switch led control values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36796
2013-05-30 17:38:21 +00:00
Gabor Juhos
4cf6e53ccc
ar71xx: rb2011: update RGMII RX/TX delay values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36795
2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793
ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36794
2013-05-30 17:38:17 +00:00
Gabor Juhos
d6554bf66a
ar71xx: add kernel support for the RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36792
2013-05-30 17:38:13 +00:00
Felix Fietkau
144cfb65a4
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
2013-05-13 19:13:33 +00:00
Gabor Juhos
a0b31f97bb
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
Gabor Juhos
31387947c8
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
Gabor Juhos
5804b9d1b7
ar71xx: register the NAND controller device on the RB2011
...
SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
Gabor Juhos
aa2f4d4c8d
ar71xx: add initial support for RB2011UAS-2HnD
...
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
Gabor Juhos
44bf7c7cc1
ar71xx: define MTD partitions for RB2011
...
SVN-Revision: 33345
2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
